Related
Ive read people asking this same question and it hasnt been addressed yet. I downloaded and installed the SE Rom 1.2, and I cant get the Phonext to assign individual ringtones. Ive tried everything, 100K or less, reinstalling Phonext, even trying a standard tone like Bellditty.wav, and Phonext always plays the default ringtone. Ive tried putting it in the Windows\Rings\ folder and still nothing. The only difference ive noticed in the phone since v1.2 was installed is the way my phone dials or recieves calls. Before when i dialed a number it filled out the ()and- automatically, ex: 555-555 now its 5555555, and before the caller id showed as 1(209)555-5555, now its 12095555555. And just out of curiosity, why does Caller2picture and Phonext always copy the ringtone to the Main Memory. The purpose of a program like c2p or Phonext is to assign alot of ringtones, Id rather have my ringtones on my 256MB Storage Card than my 32MB main memory, Ive tried changing my registry to set the default rings folder on my storage card, and it works when the phone is on, but if it starts to rings while my phones off, it wont ring. And thats setting the ringtone through the regular option not phonext, phonext still doesnt work. Has anyone figurd this out yet. Thanks for any help.
My conclusion, I already give up these 2 app regard ringtone setting. Just stick with the regular option.
One more thing, I have the same problem as u described. When I turn off the dvice, incoming call doesn't ring. One way to figure out is only turn off the screen and everything works fine while u set the default ring folder to the storage card.
This was a bug in Special Edition v1.2, not in PhonExt: I missed a registry key. If you add the following registry setting:
[HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0]
"SavedSound"="DefaultRing .wav"
PhonExt's distinctive ring feature will work.
Or you could make a new 3.17.03 based ROM from the kitchen. PhonExt's distinctive ring feature does not work on any ROM based on WM2003.
I've been using the Pic and Ring program with WM2003 and it's working just fine. I used it with 3.17 and 4.005 and 4.010
http://tucows-pda.alphalink.com.au/pocket/preview/320312.html
- Jim
Thank you very much for the reply, i'll add the registry key soon. Thanks again.
P.S. XDA-Developers.com RULES!
HI jgme,
Did you get your phonext working? I have mine taken from a rom kitchen cooked 3.17 rom and has the registry setting that xda developer has posted earlier. It still won't work. Can someone kindly give me a checklist on all the areas to check on to get the darn software working?
Cheers
Vic
No I fixed the Reg key and it still didnt work. Well when i open up regedit, SavedSound was already there, so i changed the value to defaultRing .wav and it still didnt work. So maybe theres someone with other ideas?
Hi I'm suffering from the same problem with caller id show as +1(208) 2334 4444 when dialled using PhonExt it inserts +1 which is US area code. My contact list store all contact numbers with (0208) 234 4444. I'm located in the UK I'm using
ROM VERSION: 3.17.03 ENG
ROM DATE 05/15/03
RADIO VERSION 4.21.00
Protocol version : 32554
PhonEXT 1.2.0.0
Any suggestion getting this to work .
Hi
Go to settings, connections, connections, dialling locations and change the country code. I simply deleted the entries in area code and country code and I could dial normally in the UK. However, I still can't get the ringtone customised to work !!!
:x
Vic
Hi
I am trying to re-install my MDA Vario II, cherry picking only the cabs that give me something useful. Everything works OK apart from MMS. Put simply, the MMS folder will not stick around after a soft reset.
If I let t-mobile install all its [email protected] after a hard reset, MMS works fine and stays put after a soft reset. If I cherry pick only what I want, it does not work.
My question is which cabs are required in order to support MMS (both the cabs that are installed from the windows folder and also those in the extended rom). I have actually run through and manually installed each cab in order as per what the preconfig and config files do... MMS still dissapears after a soft reset!!! It really is very very odd (and frustrating).
I would search for this as it sounds like an issue that someone else may have had. Unfortunately, the search function does not work correctly (told me 15 times that I entered the image verification text incorrectly, when it was actually entered correctly 15 times).
The lack of a quick search function that does not seek to wind up the user makes this site less useful than it used to be!
Nigel
After many tries without success, I finally managed to integrate in only one cab all the needed to get VOIP calls without the listener bug (rtcdll.dll) in my two devices. I checked it in HTC TYTN (Hermes) and HTC Trinity (P3600) runing both Windows Mobile 6.1.
The install method is simple. Download this file:
Code:
http://rapidshare.com/files/124054481/destr0_VOIP_WM61___SIP_Config_1.1.CAB
And install in your phone.
Then, go to Today menu, Programs, Sip Config Tool, input your provider settings and save. Then, go to Today menu, Settings, Today, Items and check "Internet Calling". Then, go to Today menu, Settings, Phone, Internet, and select "Only if cellular is not available" or "whenever available" according to your needs.
Softreset your phone, and after that, connect to a wifi network. You will notice that in your Today screen, the VOIP line has changed from "No service" to "Available". If you want to make a VOIP call, click on this line, and will change to "Selected". All the calls you make from now on will be done using your VOIP line.
Hope it helps you!
destr0 said:
After many tries without success, I finally managed to integrate in only one cab all the needed to get VOIP calls without the listener bug (rtcdll.dll) in my two devices. I checked it in HTC TYTN (Hermes) and HTC Trinity (P3600) runing both Windows Mobile 6.1.
The install method is simple. Download this file:
Code:
http://rapidshare.com/files/123650406/destr0_VOIP_WM61___SIP_Config.CAB
And install in your phone.
Then, go to Today menu, Programs, Sip Config Tool, input your provider settings and save. Then, go to Today menu, Settings, Today, Items and check "Internet Calling". Then, go to Today menu, Settings, Phone, Internet, and select "Only if cellular is not available" or "whenever available" according to your needs.
Softreset your phone, and after that, connect to a wifi network. You will notice that in your Today screen, the VOIP line has changed from "No service" to "Available". If you want to make a VOIP call, click on this line, and will change to "Selected". All the calls you make from now on will be done using your VOIP line.
Hope it helps you!
Click to expand...
Click to collapse
Nice work, will test now.
Been a while since ive seen a single cab for the drivers and SIP config tool (thx shaun33).
EDIT:: fired the cab up in WM6 emulator device and the dll loads up nicely, sip config tool is there. Internet Calling today item shows up and the Internet tab appears in phone settings. Its good stuff....didnt need a soft reset either.
please provide feedback for your devices, I checked in the two ones I have and it worked.
SIP config tool credits go to shaun33
destr0 said:
please provide feedback for your devices, I checked in the two ones I have and it worked.
SIP config tool credits go to shaun33
Click to expand...
Click to collapse
Hi destr0, just installed on Kaiser (TyTN_II) with HyperDragon IIIm ROM (WM 6.1 "lite"). Registered and running to my VoIP provider like a charm.
Tomorrow I'll use/test it heavily at work (where we have an asterisk/sip as internal phone system)...
Thanks a lot for your sharing.
Dude,
Its awsome to see that that app is still kicking.
If you can think of any upgrades that would make it easier to intergrate with your cab shoot me a PM or catch me in the IRC chan.
Everything seems to be working ok on my AT&T Tilt 8925, but i dunno what to put for sip server and such. Tried going to tools, load config, from device and that brings up an error every time.
daigoro64, I have an asterisk server at work and even with it, calls go out through the wifi and reach the destination phone.
yusuke14, you have to create yourself a VOIP account. There are many providers, I personally use three from betamax: www.voipbuster.com, www.justvoip.com and www.intervoip.com. You can look at theis fares here: http://backsla.sh/betamax
Shaun33, of course your app still rocks! many thanks for it. I suggest you could have a list of sip servers in a dropdown box to be easier to configure for the first time
Good work destr0. I keep it for next NiAx's Rom.
NiAx.Team
You listen from your external speaker or internal ? like normal call ?
John_A said:
You listen from your external speaker or internal ? like normal call ?
Click to expand...
Click to collapse
from the internal, like a normal call
Thanks a lot .... I try it now with my asterisk
Can´t wait to try it, nice work
Great work man..Keep it up
Here is an OEM for It :http://rapidshare.com/files/123749980/OEM_VOIP.rar
A big thank you for a great job.
Gracias
destr0 said:
After many tries without success, I finally managed to integrate in only one cab all the needed to get VOIP calls without the listener bug (rtcdll.dll) in my two devices. I checked it in HTC TYTN (Hermes) and HTC Trinity (P3600) runing both Windows Mobile 6.1.
The install method is simple. Download this file:
Code:
http://rapidshare.com/files/123650406/destr0_VOIP_WM61___SIP_Config.CAB
And install in your phone.
Then, go to Today menu, Programs, Sip Config Tool, input your provider settings and save. Then, go to Today menu, Settings, Today, Items and check "Internet Calling". Then, go to Today menu, Settings, Phone, Internet, and select "Only if cellular is not available" or "whenever available" according to your needs.
Softreset your phone, and after that, connect to a wifi network. You will notice that in your Today screen, the VOIP line has changed from "No service" to "Available". If you want to make a VOIP call, click on this line, and will change to "Selected". All the calls you make from now on will be done using your VOIP line.
Hope it helps you!
Click to expand...
Click to collapse
I have an Elfin (HTC Touch) with the latest rom 19949.1.2 installed. Sound comes from the external speaker and mic is not working. This might be caused by the latest rom. Other Elf\Elfin user tried to install Voip for wm6.1?
jmmertens said:
I have an Elfin (HTC Touch) with the latest rom 19949.1.2 installed. Sound comes from the external speaker and mic is not working. This might be caused by the latest rom. Other Elf\Elfin user tried to install Voip for wm6.1?
Click to expand...
Click to collapse
Can anyone confirm it uses the external speaker in the Elfin?
In my TYTN (build 19949.1.2) and Trinity (build 19213) uses the internal one
very good efforts. Wow!
destr0 said:
please provide feedback for your devices, I checked in the two ones I have and it worked.
SIP config tool credits go to shaun33
Click to expand...
Click to collapse
--> Will it work on mi P3300 (Artemis) running WM5 ??
tried it but doesn't work here.
Incoming calls: after answering with green button other party still hears the tone as if i didn't pick up.
Outgoing calls: can't hear other party
this was tested over 3G. Haven't tested over wifi.
Hi,
does anyone make Internet Calling work on Rose? I have Rose with genuine ROM, unlocked from the box and have in settings Internet Calling option. I have tried to make SIP setting from tread http://forum.xda-developers.com/showthread.php?t=299950 but I have problem, I could not install any CAB file I made, anytime I received an error "installation of VoIP.cab was unsuccessful". So, does anyone know where is the problem, why I cannot install .cab file?
Or are there another way to make Internet Calling VoIP/SIP working?
Thanks.
About:
Windows Mobile 6.1 Standard
CE OS 5.2.20279 (Build 20279.1.3.4)
Radio Version 12.23.30.06H_0.24.30.24
RIL Version 2.002
have you tried fring
fring? I am having trouble with wm6.5 but I think your using 6.1 so you should be fine (I think). If there is anything else just let me know
No Fring. It is disaster... Latency, Jitter... If other side starts to speak I cannot hear anymore couple seconds, one have to listen and another to speak. But clearance is 20%. This is not even decent.
Thank you for answer, anyhow.
New IMPROVED CABS HERE
*********
WM6.5 and now WM6.1
*********Install on Fresh OS
Tested and flying on my HD, HD2, Omnia II, Glofiish M700, Touch Pro2[Rhodium], BlueAngel[PDA2K].
This time i have made single cab[sipConfig.cab] with Schap`s voip setup inbuilt. Hopefully 3g option will work with this cab as i have changed few settings. Tweaked is home screen item selection[select thru Available and selected to make cellular call or sip/voip call{one have to use classic home screen to do this}]. This cab is GSM codec based unlike previous cabs hence very low bandwidth is required to place calls, Can be used to make calls over GPRS but not sure. Quality of calls is .99/1 and no dropouts and one can call as long as credit available in account. What else, as this cab will integrate into phone system, it is very easy to use with addressbook, etc. I have attached audioswitch out file which if installed comes into action[can hear from earpiece] 13 seconds after phone window is active on screen, doesn`t matter calling or recieving. I have also attached SRS file just in case if someone hear less/low volume from earpiece just follow the instructions attached. Also attaced is Wifi always on file which some HD2 users need. Also 5060 port has been enabled in these cabs but you may need to forward 5060UDP port in your router for possible two way communication. Hopefully you guys like this cab, Please leave comments and suggestions. Thanks
Credits to developers.
*Most of the bugs has been fixed discussced in previous cabs.
Previous Cabs can be found here
--------------------------------------------
UPDATE : 1
DIAL PLANNew cab[sipConfigDialPlan.cab] with jaaps Dial Plan inbuilt. Both sipConfig(setupVOIP) and DialPlan can be accessed from Start Menu. Now one have the option to install with or without dial plan. Thanks
UPDATE : 2
GPSNow there will be no problem when using GPS [File Updated]
UPDATE : 3
START MENUOnly one instance of voipSetup shortcut in start menu
UPDATE : 4
WM6.1 SUPPORTNow WM6.1 OS supported just choose the cab with WM6.1 written in it, others are for WM6.5 OS.
UPDATE : 5
VOLUME INCREASE Tip By: angusc Thanks Now one will be able to hear bit loud sound either from back speaker or earpiece.
UPDATE : 6
OTHER CODEC SUPPORTNow all major codec supported ie: G.711 a-law, G.711 u-law, GSM codec.
--------------------------------------------
*RECOMENDED INSTALL LOCATION : DEVICE*
*DO NOT INSTALL ALL CABS, JUST INSTALL ONLY ONE YOU WANT*
*IF NOT WORKING OR GIVES YOU ERROR, THEN ITS OPERATING SYSTEM LIMITATION*
*DO NOT INSTALL WM6.1 CABS ON WM6.5 OS AND VISE VERSA*
*AudioSwitch.cab/WifiNoStandby.CAB/Tested SRS.rar cabs are OPTIONAL and can be installed on both WM6.1 and WM6.5 OS*
Will you eventually release a dialplan supported version? I know this is a nitpick but I really use that file alot.
Yes, working on it. But will take time as hard to get time off. Thanks
Any reason why I can't install this...
Installation was unsuccessful. The program or setting cannot be installed because it is not digitally signed with a trusted certificate.
try installing remove certificate or first cab in Tested SRS.rar attached to get rid of this warning. are you installing on fresh OS. Thanks
Sorry, I'm still a noob at this. The Blackberry phones can make free calls via WiFi on T-Mobile when overseas. Will this program make the HD2 work the same way, by using minutes off my T-Mobile plan? Or do I have to put a cash balance into a 3rd party provider?
cu2cool said:
Sorry, I'm still a noob at this. The Blackberry phones can make free calls via WiFi on T-Mobile when overseas. Will this program make the HD2 work the same way, by using minutes off my T-Mobile plan? Or do I have to put a cash balance into a 3rd party provider?
Click to expand...
Click to collapse
I think you are slightly confusing things, with voip you can make calls from anywhere as long as you have internet access. Now the free bit is different, you must have a voip provider and their fees may vary. Now if tmobile is giving away voip subscriptions with their wireless then I need to find out about that, but I have never heard of it!
@dhillonbros - Much love for working on this!
So is this just an integration software like http://www.portsip.com/ to make internet calling seamless on the HD2?
cu2cool said:
So is this just an integration software like http://www.portsip.com/ to make internet calling seamless on the HD2?
Click to expand...
Click to collapse
are you sure that its an integrated solution
No, I'm not sure. That's just what it looks like. There's a whole thread for it here http://forum.xda-developers.com/showthread.php?t=508715.
I tried this on my HD2 but couldn't get it to work... I got errors in cprog.exe and gwes.exe on startup that I've never had before. When I tried to make calls it just went through the cell network or said "phone not connected" if I turned it off. The problem might be that I wasn't sure how to correctly register to my voip provider. Anyway, I didn't want to mess around with it and because of the cprog/gwes errors tried to uninstall - but uninstall didn't work.
Maybe I'll try again later. Does a proxy server have to be put in the settings, or is that for only certain setups? Would it usually be the same as the registrar server?
I installed todat without any errors. T-Mobile UK. The phone picks up my SIP landline service number but in the today screen after the no. it states no service.
I also appear to have two copies of the same software listed in my programs one called SetupVOIP the other sipConfig. Both on clicking setupvoip.exe
the dialer option page is blank.
looking forward to dumping fring but need a wee bit of help to get over the last hurdle.
this build is working better than older version on my Tilt. The issues I have are the dial plan, but I fixed that by editing the ipdialplan.xml file and removing all the number nines in it.
Second issue is that it looses registration after a while. I'm using AT&T 3G. Later on it is registered again but on and off throughout the day.
Installation ok but no voip on HD2
Hello,
The instalation is gonna well, but i have only the configuration tool, no additional items in today screen or phone menu, how can i switch between voip and standard calls?
br
nobisz
The configuration tool is used to set when your call will go through voip ("never", "whenever available", ...). From there it works transparently. For example, if you set to "whenever available" all calls will go through VOIP if it is able to register to the VOIP service, otherwise they will go through your cell network.
in the configuration tool, should I select TCP or UDP? I am using 3G
cesierra said:
in the configuration tool, should i select tcp or udp? I am using 3g
Click to expand...
Click to collapse
udp is the best option
@amcclean : Please try new cab. Problem fixed
interlope said:
I tried this on my HD2 but couldn't get it to work... I got errors in cprog.exe and gwes.exe on startup that I've never had before. When I tried to make calls it just went through the cell network or said "phone not connected" if I turned it off. The problem might be that I wasn't sure how to correctly register to my voip provider. Anyway, I didn't want to mess around with it and because of the cprog/gwes errors tried to uninstall - but uninstall didn't work.
Maybe I'll try again later. Does a proxy server have to be put in the settings, or is that for only certain setups? Would it usually be the same as the registrar server?
Click to expand...
Click to collapse
Mines flying on HD2, same as registrar server.
In Polish version of WM 6.5 you shall add "telefon" in command.txt file (Program Files/audioswitch) for the AudioSwitch to work....