Related
I have bought a Wallaby QTek 1010, but without a drivers/software CD. Please help me: what do I need to install on my pc, to connect to my Wallaby (what software? what drivers?) And where can I download it?
(I did have searched the internet, but couldn't find enything )
1.) ActiveSync
2.) directly from Microsoft for free
Stefan
Thanx! ...off to try it out!
software
Hi i have a 1010 and have upgraded to w2003 from LumpiStefans rom kitchen, hasn't missed abeat since, so you may want to flash your rom and update.
Peace
Just downloaded ActiveSync on the Evil Empire's site, plugged the USB cord directly to my Qtek 1010 and the other end to the PC's USB port, still can't detect it!?
Bad cord?
Do I need the cradle?
I only have the unit and the charger, that's it.
HELP!
Are you using the correct USB-Cable?
Is it designed for the XDA?
Which ROM Version dou you have on your device?
Have you configured ActiveSync on your PC for USB Connection?
Stefan
I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!
Hello Guys,
I have updatet my PPC from Windows 2003 to Windows mobile 6.
Now i have downgradet to windows mobile 5 and my telephone (calls) dont work.
I i try to upgrade to another version (wm6) i get an error "Country-ID Error" on my PC and my Pocket PC goes off. If i take my PPC out of the Cradle, my pps returns in the Bootloader modus and "Seriell" have a red Background..
Please help me
which ROM have you used ?
before,, mine is xda-II, and very happy with wm6 from :
C_ShekharAKU7.0c.R40.P24_public
try to reflash with another wm6 ROM, i did 4 times reflasher with wm6 ROM different. and stable with C_ShekharAKU7.0c.R40.P24_public
maybe you must use or click at HimaUpgradeUt_noID.exe
not at HimaUpgradeUt.exe
First I was using WM5, then I decided to WM6 ROM update and tried "nhocbanme PDAVIET WM6 for HP iPAQ rw68xx ROM", everything was OK, it worked well, after, I have decided to change it with Garmin 03.02.2008 Kumara TOUCH WM6 Premium- (OS CE 5.2.2000 Build 20000.1.0.0) ROM, I put the files of Garmin's to the MiniSD card, then pressed the soft buttons to make my ppc bootloader mod. However, it resetted, the I pressed the soft keys again and it closed with white screen, I think I pressed another button while pressing soft keys, ı could not understant. It still turned OFF and I am not turnin it ON, I tried lots os button combination but it did not work My battery is full and I connected it to my laptop by USB cable, but it did not see my PPC coz it is closed could anyone help me about this case?
please help me what do you suggest me?
Try to disconnect cable USB, to pull out a battery (for some minutes) and to pull out a card miniSD. Try to come in bootload, learn all methods. If it will be possible, start on a laptop native insertion WM5, connect the device and burn it. Then stitch worker WM6 if is. If nothing will turn out that collect JTAG a cable, and reanimate.
sugermas said:
Try to disconnect cable USB, to pull out a battery (for some minutes) and to pull out a card miniSD. Try to come in boot the menu, learn all methods. If it will be possible, start on a laptop native insertion WM5, connect the device and burn it. Then stitch worker WM6 if is. If nothing will turn out that collect JTAG a cable, and reanimate.
Click to expand...
Click to collapse
Thank you very much for ur information bro,
sugermas said:
start on a laptop native insertion WM5,connect the device and burn it. Then stitch worker WM6 if is.
Click to expand...
Click to collapse
you said that, how can I do this? could you help me?
At me rover g5, clone Atom EXEC, on how many I know your device - close brother Atom EXEC.
You have native insertion WM5? If there is no that download it.
It is possible to come in bootloader? If that is possible come into it, start Device Software Update Utility.exe (or the similar program starting ROM UPDATE), connect the device to USB, and burn. I do not recommend to be stitched from card MiniSD.
sugermas said:
At me rover g5, clone Atom EXEC, on how many I know your device - close brother Atom EXEC.
You have native insertion WM5? If there is no that download it.
It is possible to come in bootloader? If that is possible come into it, start Device Software Update Utility.exe (or the similar program starting ROM UPDATE), connect the device to USB, and burn. I do not recommend to be stitched from card MiniSD.
Click to expand...
Click to collapse
I could not come in bootloader, this is my problem :S my PPC is not working.
kumaranın romu 6815 için değil yanlış yüklemişsin, bataryayı çıkart 5 dakka bekle resete basılı tutarak bataryayı tak
ama 68xx yazıyor ilgili ROM da. dediğin yöntemi de bir çok kez denedim ama olmadı :S yarın servise götürcem :S JTAG ı beceremem diye düşünüyorum :S
-------------------------------------------------------------
Is there anyone who could help me?
bootloader ini bozmadıysan jtag e gerek yok, kumaranın romunda bootloadere geçişi farklıydı galiba, ona bir bak.
bu arada kumaranın neresinde 68 diye yazyır ?
Englisch forum
This is an Englisch forum.
b3kturk said:
First I was using WM5, then I decided to WM6 ROM update and tried "nhocbanme PDAVIET WM6 for HP iPAQ rw68xx ROM", everything was OK, it worked well, after, I have decided to change it with Garmin 03.02.2008 Kumara TOUCH WM6 Premium- (OS CE 5.2.2000 Build 20000.1.0.0) ROM, I put the files of Garmin's to the MiniSD card, then pressed the soft buttons to make my ppc bootloader mod. However, it resetted, the I pressed the soft keys again and it closed with white screen, I think I pressed another button while pressing soft keys, ı could not understant. It still turned OFF and I am not turnin it ON, I tried lots os button combination but it did not work My battery is full and I connected it to my laptop by USB cable, but it did not see my PPC coz it is closed could anyone help me about this case?
Click to expand...
Click to collapse
It seems that you have not read the first post of the thread properly. nhocbanme PDAVIET WM6 is for your unit that is why it worked for your HP6815. As stated above, you have switch to garmin KUMARA TOUCH WM6 Premium which is for XDA ATOM(black) and ATOM PURE(white) only. If only you have read carefully and understand the thread before doing the update procedure you may still have a working device.
This may be a case of ANOTHER bricked device because of not READING properly. That is why it is stated in the first page of the thread for what device can the ROM be used. You may try to check the wiki if you can still revive your unit. Although the JTAG of the HP units are different from the ATOM. Good luck mate
hprw6815 keep self reset BL FF.FF.FF
have earlier update with Ver2.02.01b_byNHOCBANME i was very happy with it but bt handsfree didnt worked so i tried 6828-WM61-20080920-b165.tarminisd then i couldnt update back i changed bl to HP BL1.0.1 with out success i think my devise is ****ed up... i appreciate if some one can help me
O2 Atom LIFE....
After the package file release (AL1_CB_0425_WWE_B1_DSUU.exe), he was copy all of file to MiniSD and reset Atom Life to bootloader mode and it was upgrade. So, upgrade to 99% it was notice error. He softs reset it after wait for minute. it can not power on and black screen.
My Atom is Blinking RED... & BLANK SCREEN.... ((((((((((((
I'm copy IPL.nb0 and EBOOT.nb0 to minisd card... & ... (((((((
PLZ HELP ME!
try to flash back the shipped rom from O2.
My atom Life is dead too
I just have got it yesterday andthen i flashed it today with the WM 6.1 rom from Medkid and then was working, then i wanted to get back to the original rom then i downloaded one from the wmg homepage and was not working, then i extracted the files and put on my minisd and it has flashed but then it was not working anymore... is just black screen... nothing works.. tried removing the baterry, reseting, hard reseting,.. no lights on.. just when i plug it to charge i see the charging light on.. Can someone please help me too.. pleaseeeee
thanks
My Atom
Last night i had update to WM 6.1 kumara final, but after stage bootloading on stage external room my atom is dead, Please help me
unplug MiniSD then Try to do hard reset...
you can rescue your devices (atom/Atom exec / Atom life/ HP 68xx/ O2 Flame) by JTAG
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
rizalnasa said:
Last night i had update to WM 6.1 kumara final, but after stage bootloading on stage external room my atom is dead, Please help me
Click to expand...
Click to collapse
Can you still get the bootloader?
If you can boot it up to the boot loader. you can plug into your computer and flash another rom. I had the same problem a week ago. now my atom is working again with Homers WM6 rom