whenever i restart my phone while its connected to usb cable it hangs up in the windows mobile boot screen and i have to hard reset my phone to get it working again
do anyone have a solution for this problem ?
check out the following thread
http://forum.xda-developers.com/showthread.php?t=320689
yeah unplug, and reboot it again.
crazy_luv said:
whenever i restart my phone while its connected to usb cable it hangs up in the windows mobile boot screen and i have to hard reset my phone to get it working again
do anyone have a solution for this problem ?
Click to expand...
Click to collapse
This is a known problem with all WM6 ROMs so just don't reset while connected!
Read the thread linked in the second post =) possible cause found.
crazy_luv said:
whenever i restart my phone while its connected to usb cable it hangs up in the windows mobile boot screen and i have to hard reset my phone to get it working again
do anyone have a solution for this problem ?
Click to expand...
Click to collapse
Did u set password for ur device?
U can do one of following:
1. Just disable password
2. Unplug cable when restarting.
Related
Hi Guys,
Need your advise, I've tried to reload the PDA Viet temp on my device so that I could reload the 4.0.0.6 ver again. The rom works great but some how on the 2nd day it start to be power draining on my 818Pro. was going to reload to play as plain before any apps installation to see if its apps issue and got stuck at boot loader.
Issue Now:
1. on running the device now it goes into boot loader and when connected.
2. doesnt seem to have any OS install and when Hard reset goes to bootloader too.
3.when try to load the ROMUpgradeUtility_NV_G4 fail to connect.
4. Now even when in Boot Loader Screen, the device goes on and off USB connection. making it impossible to transfer files to device.
Please Advise.
Thanks in advance
Try to push/hold camera, comm, and reset button, then release reset and comm but hold the camera, it will be go in the bootloader screen. At this point connect the usb cable and wait until the connection is done.
Are you sure your pda is G4?
thks some more light to the problem both hard and soft rests gives me bootloader but its turn on and off on the USB connection and last check on power is @ 90%
skyhigh75 said:
thks some more light to the problem both hard and soft rests gives me bootloader but its turn on and off on the USB connection and last check on power is @ 90%
Click to expand...
Click to collapse
Hi All,
Just like to encourrage all to be persistent on resolving the issue, think my issue had been resolve, not sure why the batt hard to be charge for bout 6-8hrs by Charger(not USB connection from Computer) almost like initial charge to be able to last through the step one downgrading to wm5.
Previously I charge for bout 4hr via charger and it didnt work, but since there's not new solution I persisted to charge for a longer time and rest before I try again and it work. Thanks for all's contribution the the solutions.
i have sprint touch pro CDMA with new energy rom. i tried to sync it with my laptop. phone and laptop both hanged. i resetted both. laptop started properly.
but TP have problem. its struck on start screen with TOUCH PRO and radio and other information. its not moving ahead. the other problem is that i cannot enter booloader as my volume down button is also not working. i am really in a fix over here.
i need to start my phone. last night also, it stuck at start screen but when i press reset button, it started. but today its not going beyond start screen.
i tried all the possibilities like connecting to different PC, same PC, different USB, removing SD card and then resetting, but no luck..
please help.....
thanx a million in advance.
csmartly said:
i have sprint touch pro CDMA with new energy rom. i tried to sync it with my laptop. phone and laptop both hanged. i resetted both. laptop started properly.
but TP have problem. its struck on start screen with TOUCH PRO and radio and other information. its not moving ahead. the other problem is that i cannot enter booloader as my volume down button is also not working. i am really in a fix over here.
i need to start my phone. last night also, it stuck at start screen but when i press reset button, it started. but today its not going beyond start screen.
i tried all the possibilities like connecting to different PC, same PC, different USB, removing SD card and then resetting, but no luck..
please help.....
thanx a million in advance.
Click to expand...
Click to collapse
Even im facing some issue with Energy's New ROM cookie 2.0 touch glass 0ct 14.
My cell got stuck when i was rebooting the cell. After that when i boot the cell it will get stuck at main screen (Touch Pro logo with red color Text). I left my device like that.After few minutes(more than 10 minutes) when i checked, my device was in main screen and i was able to use it ..
I will flash the old ROM once i go back to home today.
And regarding entering into tri color bootloader,
I am using the mini usb cable ( not htc's usb cable) to connect my device to PC, and it works fine including sync,charging,storage etc
- i switch off my device
- connect my device to PC using MINI USB cable
- It automatically switches on the phone and goes to bootloader screen
PS: i do not press any button, not even power on button
Please some one confirm if this is normal behavior or only it is happening only with me ,
Regards
happy20b said:
Even im facing some issue with Energy's New ROM cookie 2.0 touch glass 0ct 14.
My cell got stuck when i was rebooting the cell. After that when i boot the cell it will get stuck at main screen (Touch Pro logo with red color Text). I left my device like that.After few minutes(more than 10 minutes) when i checked, my device was in main screen and i was able to use it ..
I will flash the old ROM once i go back to home today.
And regarding entering into tri color bootloader,
I am using the mini usb cable ( not htc's usb cable) to connect my device to PC, and it works fine including sync,charging,storage etc
- i switch off my device
- connect my device to PC using MINI USB cable
- It automatically switches on the phone and goes to bootloader screen
PS: i do not press any button, not even power on button
Please some one confirm if this is normal behavior or only it is happening only with me ,
Regards
Click to expand...
Click to collapse
i think its related to ROM. one 1st night, it started, but form last 2 days, i have kept it on for long time, but no result. will try again.
csmartly said:
i think its related to ROM. one 1st night, it started, but form last 2 days, i have kept it on for long time, but no result. will try again.
Click to expand...
Click to collapse
Al d best , Ryt now i hav flashed Energy GTX sense2.5 Rom and going smooth. try flashing other Roms.
Regards
happy20b said:
Al d best , Ryt now i hav flashed Energy GTX sense2.5 Rom and going smooth. try flashing other Roms.
Regards
Click to expand...
Click to collapse
no luck... nothing happens...
if i remove battery and put again, its not going to bootloader on connecting with pc. only it shows that battery is being charged by flashing on round button...
csmartly said:
no luck... nothing happens...
if i remove battery and put again, its not going to bootloader on connecting with pc. only it shows that battery is being charged by flashing on round button...
Click to expand...
Click to collapse
Hmm , r u using usb mini cable or extusb cable from htc ?
happy20b said:
Hmm , r u using usb mini cable or extusb cable from htc ?
Click to expand...
Click to collapse
i tried with mini usb cable provided by HTC and also other make mini usb cable. but no luck
Because of stupid mistake I think I bricked my mobile.....
Yesterday only I got my mobile from SE serving center after motherboard change. Then today I have rooted my phone with onesuperclick then installed Antek File Explorer..... with the help of that I was trying to replace bin file in System folder during which I deleted bin file ..... after that nothing works..... hence I restarted mobile After that what happen I am unable to understand as it stuck of SE name...... then I succeeded to switch of phone.......
now I am able to switch on the phone .....
Also it is not detected when I connected to my PC through USB Cable ......
What should I do to restore my Mobile......????
You can repair the installation with PC Companion, search for the video i6CMmZ62G3s on youtube.
Thanks for the video fried but I am not able to connect the mobile....... means when I am connecting it through USB, led is not working, no charging, no logo, no name nothing, ...... please help....
vivekb said:
Because of stupid mistake I think I bricked my mobile.....
Yesterday only I got my mobile from SE serving center after motherboard change. Then today I have rooted my phone with onesuperclick then installed Antek File Explorer..... with the help of that I was trying to replace bin file in System folder during which I deleted bin file ..... after that nothing works..... hence I restarted mobile After that what happen I am unable to understand as it stuck of SE name...... then I succeeded to switch of phone.......
now I am able to switch on the phone .....
Also it is not detected when I connected to my PC through USB Cable ......
What should I do to restore my Mobile......????
Click to expand...
Click to collapse
Use Sony Ericsson Update Service to repair your phone.
vivekb said:
Thanks for the video fried but I am not able to connect the mobile....... means when I am connecting it through USB, led is not working, no charging, no logo, no name nothing, ...... please help....
Click to expand...
Click to collapse
run sony update service.
connect your hp to the pc through usb
press power and home key together for a while till there is a click or hp boot up
then reflash and restore your hp to factory settings
i have done that once and it works. not sure in your case.
phone is not moving ahead of SE name ...... even logo not appear ....... because of that not able to connect it to SEUS .... any other way to flash it ...........
Phone doesn't need to show any signs of life to be able to work with repair mode, but it is VERY IMPORTANT that you follow the instructions. If you don't do what the instruction says you will fail. You can try again as many times as you like, no problem.
1) MAKE SURE THE PHONE IS TURNED OFF
Really. We don't want a running phone with just a black screen. Remove the battery temporarily if possible to make sure it is off.
2) START REPAIR IN PC COMPANION
According to the video.
NOW - IMPORTANT:
3) PRESS THE PHONE'S BACK BUTTON AT THE SAME TIME AS YOU CONNECT THE PHONE WITH USB CABLE TO THE COMPUTER
This is where the magic happens! If the phone is not off, or the back button is not pressed at the moment the phone connects to the computer, nothing will happen.
that is the problem with me, as I can not pull out battery from mobile I can not switched off it and hence not able to connect PC Companion....
vivekb said:
that is the problem with me, as I can not pull out battery from mobile I can not switched off it and hence not able to connect PC Companion....
Click to expand...
Click to collapse
Hold "power" and "home button" together until you see black screen. After that immediately press and hold "BACK BUTTON" plugging your phone into PC.
I doesn't want to start..... Only shows battery icon when charging.
if you connect tab in pc usb,your pc recognize it?
Digital @ 961 Tablet Stuck in Boot Loop
vedran.cvetkovic said:
if you connect tab in pc usb,your pc recognize it?
Click to expand...
Click to collapse
I am experiencing the same problem...i believe they call it a boot loop where the start up screen never dissappears to bring you into the actual op. system. Is the only answer to download new firmware or is there a hard/factory reset that does the trick? FYI My computer doesnt recognize the device even when plugged into my mac via usb cable. I tried all I could find on key combos and unlocks for resetting the device but none of them worked. This is the second time this has happened. The first time was an easy factory reset fix pressing both the volume + button and the power key (or was it the volume -? I cant quite remember) for 15 seconds then wiping cache and data and restoring to factory defaults. Why is this same action not working this time when performed in the same way as I did when I fixed it the first time?
Please help, anyone, if you can.
Thank you.
It sounds like you might have tampered with the rom, or something you downloaded tampered with it. That's the only way I can think of as to why the factory reset would not be working. Other than that, potential hardware damage is possible. Before I help, I need to know what model of Digital2 tablet you're using. If you still need help with it, that is.
hi guys, i just create an account for this.i tried to flash cwm 6.0.4.4 on my xgo, it said that flashing completed then i reboot the phone. but it's not booting up it's completly dead. no screen,no vibrate, only showing red led when i connect it to pc or wall charger. i can't get in to flashmode or fasboot. i've read lot of similar thread, but none solve my problem. wih you guys can solve it. thanks
Where did you find the recovery?
Sent my Xperia P running MoonWalker 7.5
AndroidNoob69 said:
Where did you find the recovery?
Sent my Xperia P running MoonWalker 7.5
Click to expand...
Click to collapse
sorry, i'm forgot. i deleted my history..
but i got it in this forum
can you please provide some info about your device, like :
what is the ROM u were using ?
is bootloader locked or unlocked?
was your device rooted ?
---------
what happens when you press power+vol up till single vibration (see any SONY logo ?) , or the phone is not responding to any reset ?
was your phone charged enough ?
if yes,
is your screen alive when you try to start your phone ? (LCD screen hasbacklit LED, is it working ?)
--------
and last one, did you grant SU permission during installation ?
setpam25 said:
hi guys, i just create an account for this.i tried to flash cwm 6.0.4.4 on my xgo, it said that flashing completed then i reboot the phone. but it's not booting up it's completly dead. no screen,no vibrate, only showing red led when i connect it to pc or wall charger. i can't get in to flashmode or fasboot. i've read lot of similar thread, but none solve my problem. wih you guys can solve it. thanks
Click to expand...
Click to collapse
deshx said:
can you please provide some info about your device, like :
what is the ROM u were using ?
is bootloader locked or unlocked?
was your device rooted ?
---------
what happens when you press power+vol up till single vibration (see any SONY logo ?) , or the phone is not responding to any reset ?
was your phone charged enough ?
if yes,
is your screen alive when you try to start your phone ? (LCD screen hasbacklit LED, is it working ?)
--------
and last one, did you grant SU permission during installation ?
Click to expand...
Click to collapse
i use CM11
bootloader unlocked
yes, it's rooted
nothing happen when i press every key combinations. just red led
setpam25 said:
i use CM11
bootloader unlocked
yes, it's rooted
nothing happen when i press every key combinations. just red led
Click to expand...
Click to collapse
is your device recognised when connected to pc ? if not, what exactly happens ? ( did you see it in status bar ? ) what is your OS of laptop ?
what happens when you connect it to a charger ?
deshx said:
is your device recognised when connected to pc ? if not, what exactly happens ? ( did you see it in status bar ? ) what is your OS of laptop ?
what happens when you connect it to a charger ?
Click to expand...
Click to collapse
no, nothing happen.
my os is windows 8.1
nothing happen when it connected to charger, just red led
U can try buying or make your own usb jig and force your phone to download mode, from there install your custom/stock rom. You can get your USB jig from ebay it ranges $3-6
Sent from my GT-I9505G using XDA Premium 4 mobile app
if your device was recognized in usb debugging mode with the flashtool, BEFORE the brick ON same win 8.1, then try getting into fastboot mode again. ( for win 8 support : http://forum.xda-developers.com/xperia-u/issues/guide-to-install-xperia-fastboot-driver-t2447283 )
- start flashtool
- remove phone from other devices. red LED should turn off.
- long press ( ~10sec ) power + vol up to do a hard reset. ( if possible )
- connect using power+vol up
- press 'flash' button, select fastboot.
if above process fails, try checking where or when it failed. try getting any error out of flastool.
-if you hear any sound in windows of " usb plugged in/out "( like plugging pen-drive in ) or flashtool showing any error ( related to drivers )
open device manager, and try connecting again. double click the device in the list when you connect the phone and check for drivers.
you can also try another usb port and/or another windows installation (preferably winXP).
if there is battery problem, u can charge your device for some time (20-30 min). when battery is drained completely, phone cannot boot up kernel and the phone charges in non kernel-governed mode. u see nothing on screen in this process.when battery is charged enough you can try connecting again.
if the phone is not recognized as a usb device to your computer( in any possible way ), then im afraid u might have messed up with the partition or the bootloader.
try getting help form CM11 devs or other devs on this post.
i am not an expert in hardware methods of recovering your device, HOWEVER, if the device somehow gets connected to pc, u may ask for help anytime.