Hello,
I use the 2.15.0001 version of SPL, the IPL I updated last week to 2.20..., where can I find the new version, and most interesting question is what is the diffrent between the two version of SPL and whatever is the SPL?
Greeting from germany
ZJay
First of all, what do you need new version for?
IPL - Initial Program Loader
SPL - Secondary Program Loader
there are no release notes for new SPL or IPL, or whats new, try to ask HTC if you have S200, they refuse to answer me as my device is from I-Mate
Related
Hi all,
Can someone confirm that the bootloader isn't being upgraded after upgrading to a newer ROM.
For example my current ROM is 1.60.00WWE with bootloader V1.02
If I upgrade my XDA to a newer ROM let's say 1.72.00WWE does this upgrade alter my bootloader version to 1.06?
Thanks in advance.
Mark
- upgrading to 1.66 leaves bootloader as it is
- 1.72 will replace bootloader by v1.06 (and all that little side effects you can read about here)
greetings from black forrest
peter
Hi Peter,
Any idea to which ROM I've to upgrade to upgrade my bootloader to 1.03?
thanks
Mark
after playing around with several german and english rom-upgrades it seems to me that no rom-upgrade up to 1.66.xxx changes the bootloader. the first rom-upgrade changing the bootloader is 1.72.xxx so i think there is no rom-upgrade with a bootloader 1.01/1.02/1.03 in it.
originally i had v1.01 on my device. when i upgraded to 1.66.231ger i still had v1.01 but since i upgraded to 1.72.751ger i have v1.06 and now i cannot downgrade to rom-versions before 1.66. when i downgrade to 1.66 bootloader 1.06 still stays on the device.
what i am still missing is an official rom-ugrade to a german 1.72 because the one i did was a rom-dump of a brand new eplus qtek to sd-card. this work for exactly one time and replaced my bootloader by 1.06 then i downgraded to 1.66.231ger and everything was fine. but there is no way to perform the upgrade to 1.72 by sd-card again because now i get the message "update not allow". i think this is because of the wrong country-id of the rom-dump on sd-card (which was no problem for bootloader 1.01 but 1.06 cares about and denies).
so i hardly wait for an official 1.72.xxxger where i can change country-id by er2003edit.
greetings
peter
Does anyone know how to upgrade the bootloader on an xda2. Have a number of units with old roms (1.02) which we want to upgrade to 1.72 rom image. The rom updates but not the bootloader. Problem is the unit i use to build the rom images i use is a 1.02 bootloader and a desperatly need to upgrade this.
hi,
strange...
I have bootlooader v1.01 and I had these opsystems on my device with no problem:
v1.3 ger - o2
v1.6021 wwe - qtek
v1.6036 wwe - t-mobile
v1.66130 wwe - qtek
v1.72126 wwe - imate
v1.72187 wwe - o2
v2.0600 wwe - o2
and now win2005 mobile
so why would / want to upgrade?
afaik higher the bl version harder to downgrade / play around (correct me if I am wrong)
regards,
ym
http://forum.xda-developers.com/viewtopic.php?t=12898&postdays=0&postorder=asc&start=75
See my post, it's for WM5 but you can read the topic!
bootloader version
Thanks for the reply, its not the splash screen but the bootloader version i need to change and be able to upgrade at will.
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
i hv just done it. i did not encounter any major problem except after flashing it with the official ROM, the storage memory is very low ....
KENPPCPHONE said:
Please find below the infomation of my softbank X01HT which I bought few days ago. The softbank has been unlocked by the shop and is running traditional Chinese on WM5.
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Please advise if it is safe to run HARDSPL for upgrading to WM6.
Will there be any adverse/damaging effect?
Do I need to downgrade the ROM version before running HARDSPL V7.
Please advise the procedure.
Thank you in advance
Ken
Isi
Click to expand...
Click to collapse
yes it is safe... but you need an activesync partner ship setup to installl HardSPL as it needs to push SSPL to your device... for more information read www.mrvanx.org
Zilch said:
I believe you can just put it into bootloader mode and flash the WM6 Dopod ROM. A friend of mine did this recently.
Click to expand...
Click to collapse
with updating/installing HardSPL the device needs to be in Windows with activesync connected so SSPL can be pushed to the device...
I trid to install HardSPL Version 7 (2.10.olipro).
I activesync connected and run RUUWraper.exe
I go through all the selection right and on the last page after I click "next" I press yes on my Softbank. but the flash download didn't started and the Softbank reset and go into the engineering mode where I still see :
IPL- SSPL Des
SPL-1.09.ds
All my versions are the same as Ken which are:
IPL 1.01
SPL 1.09
ROM Ver 1.23.708.4
ROM Date 07/24/06
Radio 1.06.00.10
Comm Protocol 32.37.7010.01W
Could anyone advise any solution in proceed with HardSPL installation?
Thanks a lot
Henry
Hi Conorau,
Following the procedure in this forum, my softbank successfully upgrade to WM6 without any problem. Good luck
Ken
IPL 1.04
SPL 2.10.01 olipro
ROM Ver 3.54.708.2
ROM Date 07/05/07
Radio 1.47.00.10
Comm Protocol 32.80.7020.20H
here is solution
I think it usefull !
http://bestsolution.spaces.live.com/Blog/cns!E39312F16E0FBE41!728.entry
and more infomation http://forum.xda-developers.com/forumdisplay.php?f=355
KEN can you tell me exectly what you did? i also want to upgrade my phone
is it ok for my phone to to according to this FAQhttp://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeGuide + take this ROM http://forum.xda-developers.com/showthread.php?t=321332
please help!
Hi guys I need to downgrade for warranty reasons (Vibrate stopped working)
I have been looking through mrvanx guide and it mentions
"SPL 1.04 (includes IPL 1.00) SPL 1.06 (includes IPL 1.01)"
The thing is my SPL was 1.04 and IPL 1.01 which seems to be a mix of the above !
my Radio version 1.05.05.00 but this is also not on the wiki.
Here are my phone details before
IPL-1.01
SPL-1.04
Rom version 1.21.110.3
Rom date 06/19/06
Radio version 1.05.05.00
protocol version 32.36.7010.04H
Will I need to get the exact same radio and rom version with rom date
or you think its possible they will over look these details aslong as WM5 and an early radio rom is flashed?
Thanks for any advice, Chris.
I really doubt that they would catch it as long as you have wm5. But, if they do, then just play dumb or try another store.
Thanks, I'll try that is there any risks when downgrading or uninstall HardSPL v7 ?
Once my phone had SPL 1.04 on it (after downgrading via MrVanx's method), I flashed the official rom from my carrier, and it returned me to the factory settings. One note, my phone is super CID.
The only T Mobile WM5 rom I can see is the Hungarian one in this thread http://forum.xda-developers.com/showthread.php?t=287338
will this one be ok for t mobile uk ?
The one from hungary is the only t-mob WM5 i know of. You can also search for a dumped one and reconstruct it.
one note: do not flash radio with htc_boot less than 0107 or you'll brick it, as for your signature you have htc_boot 0108 now.
pof said:
The one from hungary is the only t-mob WM5 i know of. You can also search for a dumped one and reconstruct it.
one note: do not flash radio with htc_boot less than 0107 or you'll brick it, as for your signature you have htc_boot 0108 now.
Click to expand...
Click to collapse
Thanks for the advice I will deffentley do alot of reading before I downgrade.
So htc_boot less than 0107, does that mean 0107 are ok nothing lower or stick with htc_boot 0108 ?
I have no idea how to reconstruct a dumped rom so ill have to flash the hungay one.
0107 is ok, but nothing lower. To reconstruct a dumped rom, read the wiki
Hi everybody.
I'm about to upgrade my O2 XDA G4 from WM5 to WM6. I bought this neo on ebay and I don't know if it has already been HardSPled. Is there any chance to know - or - can the HardSPL procedure run again without creating problems?
Are the Radio, the IPL and SPL upgraded as well using one of the last WM6 rom or they should be upgraded manually? Do you recommend to upgrade also IPL/SPL/Radio?
Many thanks
The way to tell if it has been HardSPLed is to see the SPL number.
if it is 2.G3.4PDA or 2.G4.4PDA it has been hard SPLed if not, you will need to do it.
Generally, radio ROMs and IPL/SPL are best left alone (other than SPL for HardSPL).
Thanks for your quick quick reply. I have the following numbers:
IPL 2.15.001
SPL 2.15.001
GSM 02.30.21
OS 2.13.9.21 ITA
So I think I have a "2.G4.4PDA". BTW, while I can understand what 2.G4 means, I have no clue about 4PDA... Can you help?
Thanks again
D.
The numbers themselves (2.G4.4PDA) are meaningless... I think it is 2 (the SPL version) G4 (the device version) 4PDA (sounds like "for PDA").
You will need to HardSPL first, using G4 HardSPL as your device is a G4, then you can flash a ROM.
Done.
Thanks for your support. Now I have the following:
IPL 2.15.001
SPL 2.G4.4PDA
GSM 02.30.21
OS 2.13.9.21 ITA
Now you can flash a ROM.