Hello,
After a long time when I could not continue programming, I am now again a little update. With this update, I will publish the source code, since I barely have time to make the program more.
Maybe find a programmer who put on my make more!
I will also, if I can not continue programming, trying to do here in this thread, give further support added ...
I have wrote a Program to change the vibration pattern for incoming calls, SMS and EMail.
!!! Use this tool at your own risk !!!
Feature:
- Two separate Programms.One EXE for Configuration (VibroCFG) and one EXE for notification (Vibro).
- Multilanguage
- separately config Phone, SMS and EMail
- Vibration pattern set for Phone, SMS and EMail separately
- SMS and EMail vibration set in lengths in different
- Alternate SMS interception
- In what will be Profiel Vibrates
- Choose a Vibrator
- Cab-File that install the Programm
How To...
- Install the CAB on the Device
- Run VIBROCFG.EXE
- Setup Pattern -> Vibrate,Break,Vibrate,Break in ms
- Setup Profile -> In what is to be vibrated Profile (You can see the active Profile in your Phone, under the Profilesettings)
- Setup Vibrator-Nr -> Which vibrator works vibrate. Mostly the highest number.
- Configure SMS,EMail
- Press Exit in the Menu and the Programm Save the INI and Start the VIBRO.EXE
- When you reset you device. Vibro.Exe is in the Startup, so it runs automticly.(After you have Phoneservice)
FAQ
- Pattern repeat x 1 -> The pattern that you have entered is repeated X times (e.g.:200,200,100,100 -> 200,200,100,100,200,200,100,100,200,200,100,100 ).
- You must check the Profile, you want to vibrate the pattern.
- If you want to Backup. Copy only the Vibro.ini...That's all.Vibro writes nothing to the Registry.
Vibro deactivates the vibration option in the Notification Settings. When you deinstall Vibro, you must set this option manually.Otherwise your phone does vibrate when a call or sms/email is incomming.
Known Bugs
-
This Programm is my First APP I programm on the PPC, so it's not perfect. Please give me feedback as it works for you.
Code:
V1.5
- Publish Sourcecode
- Some small changes
- New Dutch language (thx frank)
- New Bulgarian language (thx gregory69)
V1.4
- Some small changes
V1.3
- New Polish language (thx klekot)
- Fix: Notification ton problem with some devices
- Left/Right slide in VibroCFG remove... (Speed up/ Hope, the problem for Elena is repaired thereby)
V1.2a
- Remove: Debug-Mode (some Problems)
- New: Language select at First-Start for VibroCFG
V1.2
- Fix: EMail notificaton (Activesync/push/other)
- New english Language (thx saumaun)
- Remove: Fadeout time...
- New: Debug-Mode for Vibro.exe
V1.1
- Fix: If you change only the pattern, it is not saved.
- Fix: Textbox in the Pattern-Settings.
- Fix: Translation-File is in UTF-8
- Fix: Mute for SMS / E-Mail
- Another try for Phone-Vibration end.
- French (thx Albator V)
- Russian (thx technicien)
- Donate-Button in Menu -> About
V1.0
- Two separate Programms.One EXE for Configuration (VibroCFG) and one EXE for notification (Vibro).
- Configuration with new GUI. Better for qVGA,VGA,WVGA etc..
- SMS alternate interception.
- EMail sound fixed.
- smaller Memory usage.
- Seperate languagefile for each language.(You can edit it with a Text-Editor. When you translte it to an other language send it to me. Referece is german...I have translate the german with googletranslator to english)
V0.9a
- Alternate SMS-Interception with Standrad SMS-Tone from WinMo
- Bugfix tone-output for EMail.(i have forgot a dll)
V0.9
- Alternate SMS-Interception (for HTC-Massagesystem)
- Multilanguage (reference is German)
V0.8
- Integrate EMail notification
- Make a ReadMe (It is in the Cab. After install, you find it on "\Programm\Vibro\")
V0.6
- Only on EXE
- Some changes in the GUI
- Volume Down can Mute Vibration
- Some changes in some routines
V0.5
- Sound length removed
- another routine to determine the profile
- When receiving an SMS in the vibration mode, was the standard SMS-Vibration output pattern. As I make this stop, they now have changed Profiel briefly Silent to vibrate the pattern.
- Fix try 2: If second call is received, vibrate, no. (Can not test it myself)
V0.4
- CAB File Install a shortcut into Startup to start at boot.
- Separate pattern for PHONE and SMS
- New GUI for VIBROCFG
- Fix: VIBRO.EXE hide at Startup
- Fix try: If second call is received, vibrate, no. (Can not test it myself) -> Try dosen't fix it.
V0.3
- Vibration for SMS(no MMS,EMAIL) (The length of the sound file specifies the length of vibration)
- SMS vibrate: Set Vibration in the Start->Settings->Notification->New SMS->Vibrate=On
- SMS vibrate at the same Profile as the incoming call(Set in VIBROCFG.EXE)
V0.2
- New Config-GUI
- In English
V0.1
- First Version
Click here if u want to get me a cup of coffee (PayPal)
P.S.:I'm German and I have to use the Google translator ..
first reply
Great,
Been looking for something like this
Will test it and report back later.
edit:
First off: it's a complete german program (hope to see it change).
If i understand it right you can set the Vibration pattern with the config tool:
Like: 100,50,200,150
This means 100MS vibration,50MS pause,200MS vibration,150MS pause.
Still playing with it, trying to add a longer rule (like: 100,50,100,50,200,100,200,100)
It seems possible but not sure about it.
CORRECT Me when i'm wrong, i don't understand German, but it looks it works like this.
Not played with the different profiles yet (don't have a clue how that works).
The process (VIBRO.exe) takes about 607 KB memory when running on my Touch Pro 2 (custom WM 6.5)
The config tool (VIBROCFG.EXE) uses 2 MB memory (doesn't need to run all the time).
I would love to help you out translating or reviewing it more (screenshots needed)?
Enough for today...
witzig, weiter so und danke
schön wäre natürlich, wenn mans direkt im System ändern könnte.
hab schon so viele Programme im Hintergrund
bigchrizzieboy said:
Great,
Been looking for something like this
Will test it and report back later.
edit:
First off: it's a complete german program (hope to see it change).
If i understand it right you can set the Vibration pattern with the config tool:
Like: 100,50,200,150
This means 100MS vibration,50MS pause,200MS vibration,150MS pause.
Still playing with it, trying to add a longer rule (like: 100,50,100,50,200,100,200,100)
It seems possible but not sure about it.
CORRECT Me when i'm wrong, i don't understand German, but it looks it works like this.
Not played with the different profiles yet (don't have a clue how that works).
The process (VIBRO.exe) takes about 607 KB memory when running on my Touch Pro 2 (custom WM 6.5)
The config tool (VIBROCFG.EXE) uses 2 MB memory (doesn't need to run all the time).
I would love to help you out translating or reviewing it more (screenshots needed)?
Enough for today...
Click to expand...
Click to collapse
I have updated my Post... Thanks for the info, what should I explain it.
nice work brother
works ok, till now, on my HD. I use this pattern:
Code:
100,100,100,100,100,300,250,200,250,600,100,100,100,100,100,1000,100,100,100,100,100,300,250,200,250,600,100,100,100,100,100,2000
(it's the old nokia script for valert, that instead doesn't work)
Thank you for the app! My Touch HD has a heart now
13,250,5,625
Any chances for customizing patterns for sms/mms/mail?
Gotta try that app on my Diamond - V-Alert was great but simply didn't work in the end. As far as I can see, you guys report this one works.
lwiczek: I would also like to see a version capable of handling the SMS/MMS vibration! (Lwiczek - "little lion" - good nick !)
earthjumper: Es würde sicher gut sein, wenn die App die SMS und MMS Vibration ändern konnte! Jedoch - eine gute Arbeit von dir!
Can I disable vibrations all together without a Sprint Tech figuring anything out??? Its an easy way to get a phone replaced
lwiczek said:
Any chances for customizing patterns for sms/mms/mail?
Click to expand...
Click to collapse
Yep, same here. Sent you a PM earthjumper on this.
This would be AWESOME. Literally amazing to do this as my TP2 sounds like it is possessed when an SMS comes in.
I even think doing say a vibrate and tone would be great. That way we know if it's an e-mail, sms, or mms coming in.
Best thing ever used on the Treo was Butler, and now with WM, i've been looking for something to replace it with alerts, and nothing so far that is even close.
Thanks earthjumper
TMartin03 said:
Can I disable vibrations all together without a Sprint Tech figuring anything out??? Its an easy way to get a phone replaced
Click to expand...
Click to collapse
dream on ... the first thing any tech normally does is hard reset (that alone would be enough to reset the vibration) and overwrite the rom to the latest official version...
Earthjumper, thanks for application, it's very nice. Only sad thing is a conflict with Phonex. Phonex doesn't start after first SR. Warning message says something like "Phonex is not valid WM application". It's definitely Vibra issue. Before trying it, I found same report on one Russian forum. So before installing Vibra I made backup - just in case, installed Vibra, and unfortunately got same issue. After recovering system Phonex is fine again. Seems like I have to wait for this problem solution before I can try your program again. Any ideas how to fix it?
lwiczek said:
Any chances for customizing patterns for sms/mms/mail?
Click to expand...
Click to collapse
Hallo,
Yes, I work on it. SMS functions already.
Have some more patience…
azza1001 said:
Earthjumper, thanks for application, it's very nice. Only sad thing is a conflict with Phonex. Phonex doesn't start after first SR. Warning message says something like "Phonex is not valid WM application". It's definitely Vibra issue. Before trying it, I found same report on one Russian forum. So before installing Vibra I made backup - just in case, installed Vibra, and unfortunately got same issue. After recovering system Phonex is fine again. Seems like I have to wait for this problem solution before I can try your program again. Any ideas how to fix it?
Click to expand...
Click to collapse
Ok,
I do not know Phonex, my program make no Registry-entries, or install psomething.
After the start of VIBRO.EXE is read in the INI file and the program puts into the background. Windows Events are supervised, which cause then a vibrating. If VIBRO.EXE does not run, there might be also no conflicts.
Is Net 2.0 or higher installed ?
Thanks for testing...
earthjumper said:
Hallo,
Yes, I work on it. SMS functions already.
Have some more patience…
Click to expand...
Click to collapse
So you are working on SMS functions correct?
I'm trying to figure out if you meant you are working on it, or it already functions.
Either way, i'm sure you will have something for us on SMS/MMS/Mail
CAN'T WAIT
earthjumper said:
Hallo,
Yes, I work on it. SMS functions already.
Have some more patience…
Click to expand...
Click to collapse
I'm patient -- no worries or pressure !
And I'm super excited about working sms vibration pattern chaning! (for the moment when phone is on the table I sometimes think it might break it )
Thanks for the great app!
lwiczek said:
I'm patient -- no worries or pressure !
And I'm super excited about working sms vibration pattern chaning! (for the moment when phone is on the table I sometimes think it might break it )
Thanks for the great app!
Click to expand...
Click to collapse
Me too. I was so fed up with the long 3.5sec or so vibrate on SMS with 2 people, I turned the phone to SILENT. This way I didn't have to throw it
I'm patient too
earthjumper said:
Ok,
I do not know Phonex, my program make no Registry-entries, or install psomething.
After the start of VIBRO.EXE is read in the INI file and the program puts into the background. Windows Events are supervised, which cause then a vibrating. If VIBRO.EXE does not run, there might be also no conflicts.
Is Net 2.0 or higher installed ?
Thanks for testing...
Click to expand...
Click to collapse
Yeah, I have .NET CF 3.5 installed.
cocomic said:
dream on ... the first thing any tech normally does is hard reset (that alone would be enough to reset the vibration) and overwrite the rom to the latest official version...
Click to expand...
Click to collapse
If I built it into a new stock rom, it would get deleted with a hard reset.
Hello
I have upgrade my HD2 from 1.66 to 3.14 - stock european rom (danish). No extra's except Cookies hometab.
I have searched, and searched and found answers, but sadly they do not work here.
Issue: SMS Notification: SMS Sent successfully (translated)
I do not want it. And i cannot seem to turn it off.
I have looked into SMS -> Settings .... and there is no mark in the SMS Delivery Report (again my translation). Tried some registry changes found using google, and still the I get the notification.
So the question is: how to turn it off ? Is it possible ?
tia
mvh / best regards
I had the same issue, and I could disable it.
When you're in the settings tab, use the Menu soft key and click the Plus menu item (it should be the only one), to access the Windows Mobile (i.e. not Sense's) control panel.
From there, you should be able to navigate to (roughly translated, I use the French ROM) sounds and notifications(sounds and alerts ?), then navigate to the second tab. There is a drop down list where you can select the "SMS sent" notification, and then, uncheck all the boxes to stop notifications.
When this is done, just press OK at the top left corner of the screen to save the changes, and return to the manila (sense) UI.
I hope this solves your problem.
IcePanther said:
I had the same issue, and I could disable it.
When you're in the settings tab, use the Menu soft key and click the Plus menu item (it should be the only one), to access the Windows Mobile (i.e. not Sense's) control panel.
From there, you should be able to navigate to (roughly translated, I use the French ROM) sounds and notifications(sounds and alerts ?), then navigate to the second tab. There is a drop down list where you can select the "SMS sent" notification, and then, uncheck all the boxes to stop notifications.
When this is done, just press OK at the top left corner of the screen to save the changes, and return to the manila (sense) UI.
I hope this solves your problem.
Click to expand...
Click to collapse
Hi and thank you.
I tried it, but no effect.
It is not a big issue - just a small annoying one
so I can live with it.
skafsgaard said:
Hi and thank you.
I tried it, but no effect.
It is not a big issue - just a small annoying one
so I can live with it.
Click to expand...
Click to collapse
Guys from HTC will probably never make SMS working perfectly on HD2. Fixing one thing, break another. These annoying notifications happen because of a missing registry entry. Just add it manually:
[HKEY_LOCAL_MACHINE\Software\Jataayu\Messaging]
"DisableSMSSuccess"=dword:00000001
Worked for me.
vzinoviev said:
Guys from HTC will probably never make SMS working perfectly on HD2. Fixing one thing, break another. These annoying notifications happen because of a missing registry entry. Just add it manually:
[HKEY_LOCAL_MACHINE\Software\Jataayu\Messaging]
"DisableSMSSuccess"=dword:00000001
Worked for me.
Click to expand...
Click to collapse
And for me as well. Thank you.
Perhaps something for Tips & Tricks ?
If you don´t want to mess with the registry there is a cab file that does it for you.
http://www.4shared.com/file/9eCnZJR4/SMS_zend_popup_uitschakelen.html
It´s in dutch but it works with any language.
I installed the cab to disable the "message sent" notification, but since then the sms conversation mode has stopped working. When I receive a message I can see it on the messages screen but when I tap it the screen opens with the top half of the screen blank, where the sender's message should be displayed. The bottom half of the screen shows the reply section with "Tap to add text".
Uninstalled the cab and soft reset but cannot get back the conversation mode. I seem to remember someone posting about a similiar issue with an earlier rom, but despite searching I can't find it.
Thanks in advance if anyone can help.
Edit: deleted all my messages and now conversation mode seems to be working again
Fix worked
This has really been bugging me since upgrading too..reg fix suggested works a treat with no ill side effects, thanks!
i created the registry key and it worked.
Thanks a lot!
cant find the path on HKLM!i get to "messaging" but then there is no "disable....."
fuorigioco1981 said:
cant find the path on HKLM!i get to "messaging" but then there is no "disable....."
Click to expand...
Click to collapse
Create it then.
johncmolyneux said:
Create it then.
Click to expand...
Click to collapse
sorry to ask you again
can you write me what do i add?
i dont want to use the cab
i added as you said the dword value but it didnt work.maybe the DisableSMSSucess should be DisableSMSSuccess?
change ur rom...
i added the string manually and all ok
In some cases you need to set following value, too:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings]
"SMSNoSentMSG"=dword:00000001
Hi. Its a common problem. I called HTC Support and they said that is an error in this ROM upgrade. They still dont know if an upgrade will come to fix the proglem. It probably will. I had the same problem so I "Downgraded" the ROM to 1.66
Regards
Stefan
zyclop said:
In some cases you need to set following value, too:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings]
"SMSNoSentMSG"=dword:00000001
Click to expand...
Click to collapse
ok that was 1
but all ok now!