ok so im new at this soo please bare with me
ive been trying to upgrade my phone to wm6
so i found instructions on youtube and followed them good...
then i found out my phone was g4
so i tried to unlock it using this
http://forum.xda-developers.com/showthread.php?t=332320
I used both and still nothing, it will cancel... i used windows xp and i still havr trouble... soo if someone can help me i would really appreciate it
im trying to unlock it so i can update it with the t-mobile wizard
and i want the touchFlo
but i just cant unlock it to get it
let me get alittle more in dep
im using the hard_SPL-G4.exe and it says no device detected
and it is (im using windows xp)
but when i try it with vista it will detect it but wont go all the way through and will leave my 8125 in a white screen
and then the program will close due to problems
i used the soft one but then it wont go though in the end on windows xp
ok i cant get it
damn!
i just want wm6
and im really confused
Related
Okay I am a real newb. I got a phone off of Ebay and it was acting odd so I wanted to upgrade from Cingular 8525 to the new ATT rom but it kept saying it couldn't do it. So I decided to run RUU_HERM_Unlock_v3a, then the it started going and wouldn't go past 0% it now is stuck in the try color screen says herm100 IPL-1.01 and SPL-1.40.Olipro :-( Please help
U.S.M.C.
what you need to do is run HARDspl.. hit me up on AIM and I will walk you through unbricking ur phone
he already has Hard-SPL installed, albeit an old one.
he just needs to use the unlocker again.
Hmn.. Well, that makes sense... I have been talking to him on AIM and he is still stuck in the bootloader, I will tell him to run the unlocker again.
Thanks Olipro..
I dont understand why it would tell him he can't run the AT&T rom .. lol
So forgive me, as I'm mostly new. I have been searching for hour for a thread, not wanting to duplicate and I cannot find this issue.
Windows XP Pro Computer
Running WM5 on the BRAND NEW phone.
Just downloaded activesync 4.5
I bought an att8525 and want to upgrade it to wm6. I found the thread with the official rom's. I figured I'd do the official before I got tricky. My problem is this, when I run the program and the phone is connected, the phone kicks off into the tricolored screen (I believe is the bootloader?) I try to run the upgrade and before the upgrade begins one screen says be sure you have an activesync connection. Well, I can't get an activesync with the bootloader screen on. So I tried running the program with the phone in bootloader AND I tried getting the phone back to the OS before continuing the installation. Neither worked.
So both come back with an error trying to connect to the phone spitting back crap about be sure the phone is still connected".
In the bootloader?? screen it says 2 things.
herm100
ipl-1.03
herm100
spl-1.11
I have had no problems with this phone before... and I very much would like windows mobile 6, and I know it works, I've seen it, I just don't know whats going on. Please, any help would be appreciated.
____________________
~Dan Allen.
A+. Net+. MCP. CCNA.
I feel your pain and had the same problems.
Bag the conventional upgrade and use the memory card method. Refer to the instructions in the wiki. It works quite well.
I had the same problem. I used this and it worked:
http://forum.xda-developers.com/showthread.php?t=317952
Where do I put the .nbh??? first time to this. Thanks.
follow the instructions here...
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
GReddySetGO said:
I had the same problem. I used this and it worked:
http://forum.xda-developers.com/showthread.php?t=317952
Click to expand...
Click to collapse
I just tried this method and got another wrong vendor error. Thanks though
~~Dan
Put HardSPL v 7 first (or SUPERCID will also do it)
wpbear said:
Put HardSPL v 7 first (or SUPERCID will also do it)
Click to expand...
Click to collapse
Awesome. I tried some things to SuperCID, but nothing worked as well as pof's any bootloader version 3 supercid program. Amazing.
Then loaded up the ROM, works great, thanks all.
It want do anything anymore. When i turn the mda vario on the bootloader shows up all the time (the rbg colored screen). I just can't do anything with it.
I tried wizard_love rom but i don't know how i can do it, cause in boatloader my phone wont connect with sync.
Can someone please help me cause i am a bit hopeless.
Thank you very much I appreciate it a lot.
G4 mda vario
I had the same problem with my O2 XDA Mini-S.
While the device is sitting with the RGB screen install the latest WM5 ROM from T-Mobile for your device.
I just loaded my O2 WM5 ROM back in and it came back.
If it won't let you install even the T-Mobile ROM then the device may be goosed.
Be careful
elataster said:
It want do anything anymore. When i turn the mda vario on the bootloader shows up all the time (the rbg colored screen). I just can't do anything with it.
I tried wizard_love rom but i don't know how i can do it, cause in boatloader my phone wont connect with sync.
Can someone please help me cause i am a bit hopeless.
Thank you very much I appreciate it a lot.
G4 mda vario
Click to expand...
Click to collapse
Read "Possible Reviving Techniques in the Wiki"
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard
Good luck!
close wcescomm.exe in taskmanager
Try running the ruu again.
Dont Use Vista.
Its easy. If you wizard is on bootloader mode just do the following.
Use a computer using Windows XP, perhaps your problem is that you are using Windows Vista. So try using a pc using XP. Then remove the sd card if you have one. Run the updater of wizard love, take a cup of coffee return 10 minutes later and there you go.
Do a Hard Reset after flashing and you now have a revived wizard.
http://forum.xda-developers.com/showthread.php?p=3909674#post3909674
HERMES (htc tytn) UPGRADE FAILURE
REPORT
Hi all of you!
I have a Hermes (HTC Tytn/ Orange SPV M3100) and i succesfully tried a lot of ROM’s until these days..
But, this happened:
During upgrade of a ROM, i made the mistake to disconect the device from the PC..
And, now the problem is that i can’t boot ANY OTHER ROM!
I can enter to BootLoader , where i see
HERM100
I PL – 1.04
HERM100
SPL – 2.03
ALSO, i CAN connect to PC (it displays „usb” & i see it on Device manager)
(PC run Vista Ultimate 64 bit).
But, when i try to upgrade ANY ROM , the process starts, BUT STOPS at 0% ? .
I searched & read 4 days for a SOLUTION to make my phone alive again..
Can anyone tell me what to do?
Is a REAL solution for this issue?
Please reply.
Thanks!
i GUESS YOUR BATT IS ALMOST DEAD!
Hi dude... does your batt is higher than 50%? the process will not continue if yuour device is under 50% maybe it is beacause you cant charge it in Bootloader. keep it higher than that... if not the case... i guess you will ned to clean it with mtty....
Just search something like that... im for sure there is a way to make it... use the stripped att rom
AND TRY WITH IT ALWAYS!!!
never but never! when you got a problem in upgrade NEVER do a hardreset.... just softreset... keep it on mind... try an XP machine get it wherever you need to get it!
thanks
..a lot for the reply!
i tried on a XP-PC, because mtty don't work in Vista (Ultimate x64)
i followed ALL the instructions..BUT..
..the problem persists!(
thanks for the idea of battery i will try again, with full of..
also, i will try some ROM's without radio's..hope that help..
BTW:
in mtty shows that the device is CID locked with:
"ORANG008"
i downloaded the last ROM for Orange 008, and tried of install...BUT..nothing!(
any other sugestion, please?
thanks again!
Hello Everybody,
My mobile at&t 8525 alias HTC 8525 is stuck in windows operator logo.It would not boot further. It happened while I tried to upgrade it from Windows 5.0 to Windows 6.0.First I got a tri-colour screen,but in a hurry I tried to backgrade to windows 5.0 again.
Other problem the mobile cannot be synced. I have installed Microsoft Active sync 4.5. Even then it could not be synced.
I tried to read all the posts ,but could not understand anything.
So please help me in getting my mobile repaired
Don't worie.
I had somewhat the same issue with a bad ROM flash.
Just disconnect the USB and boot to the bootloader screen (the tricolour screen) and you should be able to reflash the phone again.
Problem in syncing the mobile
I am not able to sync the mobile to the laptop.I have installed Microsoft Active sync 4.5. Even then it is not syncing.So how could I run the hermes upgrade if the mobile is not helping.
Please help
In Activesync on PC - Untick "Allow USB Connections".
Put the Hermes into bootloader (tri-colour screen) and connect by usb. Run the RUU_Wrapper.exe file you want. Follow onscreen instructions.
You need to have installed Hard SPL V7 for this to work...
did not work
Hello Boss
I tried to follow the procedure you suggested me. but it did not work. I tried with Hard SPl 7.0.
Please give me some suggestion
you dont need an active sync connection to flash it. Enter bootloader(tri colour screen) as you were told in the previous posts and Just click on the boxes that you do have a connection(even though you dont) and then flash the rom.
@ultramag69 i hve never had to untick allow usb connections and i have cocked up loads of rom flashes, saying that i have never had a problem flashing in vista either so maybe i am lucky
If you still cant flash doing it this way, then maybe you should try flashing from sd card instead, just make sure the battery is fully charged. Full instructions of how to do this are found in the hermes wiki, which i advise you to read anyway.
Oh and good luck anyway, you should be able to recover the phone from this ,so i wouldnt fret too much
Guess he isnt hardspl'ed... then his batt is death... must to flash a shipped rom.
correct me if im wrong.
Problem with upgrade At&T 8525 mobile
Hi!
I'm having problems with my Cingular 8525, after I made the upgrade to WM6.1 (FARIA-R32-XDA2_WM6.1.rar) for WM 6.5 (FCWs_stock_like_6.5_v3.rar), and slowed my device does not work anymore. He died.
I need help please. How resurrect it?
Excuse my English.
english is not the problem here cause we need more info... device info SPL IPL hardSPL? you go from 6.5 to 6.1?
Do you try to flash first the Stripped?
Does your batt has charge enough to boot?
There are many many things to say so... start to tell us all your history!
Hi
I tried to Hard spl with Hard Splv7. But I got a error. I even tried the Sd Card method.Its says loading and I get the tricolour mode. If I press the Power button its not showing the status of upgradation.
Where can I get a shipped rom. Actually my Spl is 1.11.
Hi
I tried to Hard spl with Hard Splv7. But I got a error. I even tried the Sd Card method.Its says loading and I get the tricolour mode. If I press the Power button its not showing the status of upgradation.
Where can I get a shipped rom. Actually my Spl is 1.11.
check the wiki pages for your device in the upper bar of this web forums
there are many official roms.
I also am currently using an 8525 (Herm100). It was received from an Ebay deal with WM5. I flashed it with the ATT OEM WM6pro (aka shipped wm6). Once it hit the three color boot screen, it sat on that for a couple of minutes then started cooking. Once it showed a progress bar, it took about 3 minutes to cook the WM6 over the WM5. It also showed a popup that stated going back to WM5 was not an option.
I would suggest running the installer again and going down to 7-11 for a refreshment. You may not have let it percolate long enough to set itself up for the actual ROM overwriting.
gorkalraghavendra said:
Hello Everybody,
My mobile at&t 8525 alias HTC 8525 is stuck in windows operator logo.It would not boot further. It happened while I tried to upgrade it from Windows 5.0 to Windows 6.0.First I got a tri-colour screen,but in a hurry I tried to backgrade to windows 5.0 again.
Other problem the mobile cannot be synced. I have installed Microsoft Active sync 4.5. Even then it could not be synced.
I tried to read all the posts ,but could not understand anything.
So please help me in getting my mobile repaired
Click to expand...
Click to collapse