Related
Hi All,
I tried flash by wizard following http://forum.xda-developers.com/showthread.php?t=298967
Every thing went well but I was not able to HARD RESET. So instead I removed the battery and started it again. It starts up but got struck at screen which says
IPL 2.21.0001
SPL 2.21.0001
GSM 02.19.11
OS 2.18.00
Could some help me what to do now. I read some threads to go to Boot loader screen by pressing "Camera" + "Reset" button and got USB at bottom left and tried RUU with some thing available on forum but every thing failed saying "connection not established"
Please guide me to solve this problem.
if ur device is CID LOCKED "G4" u need to flash the official rom 1st then flash with any G4 safe rom available >>
USING :
ShellTool
http://forum.xda-developers.com/showthread.php?t=293480
or
SoftSPL
http://forum.xda-developers.com/showthread.php?t=329147
Thats the only way for G4 "CID LOCKED"
No...
If OS is not boot up correctly, both ways doesn't work because all of them requires to do in a working OS.
You should find your stock ROM or Wizard Love ROM, use the bundled RUU to flash it so you get the device working again, then use SoftSPL/flash HardSPL and use RUU to flash OS-only WM6 ROMs.
Yes starkwong you are right. I bought my device back working by flashing it with "wizard love" now its up and running. I would proceed with Soft SPL/Hard SPL and then try to flash it with WM6.
Hey guys I'm a newbie... I was playing around and trying to flash a new rom onto my wizard/8125. The program stopped responding on my PC so I had to restart it. Now my phone is stuck in the tricolor boot screen. It says USB is connected but activesync won't recognize it.
IPL. 2.21.0001
SPL 2.21.01ip
Please help me I just go the phone working yesterday..
The reason activesync won't recognize it is because the activesync program isn't installed on your device, provided the windows mobile can't start. At the boot screen, you can still flash the device. However, I wouldn't play around with flashing your 8125 unless you know what you're doing; there's a chance that you could turn your phone into a brick.
Try flashing it with the Wizard Love rom found here.
You might need the English Update Utility files found here.
Then, if your phone is CID locked, you can use the G4 SoftSPL from this post to flash it with the G4 safe rom of your choice. My 8125 would often freeze at 99% in the update process, but flashing first with Wizard Love would do the trick.
I got it. Thanks for you're help though. I just flashed it with a new ROM program and seemed to work just fine. Thanks again
I have exactly the same problem I am also stuck and I am also showing the IPL. 2.21.0001
SPL 2.21.01ip
How did you Supa solve your problem?
I reached this stage after sucessfully installing hardspl and CID_unlocking and then tried to upgade to WM6 and failed to do a hard reset instead remove battery ( I know very stupid )
MDA3 Blue Angel
MDA Artemis
MDA Touch
He All, I managed to resolve by reflashing using ROM 1.1 CID-locked edition by ppctuning.org by simply running it-
Thank you for allowing me to do a lot of reading fro this useful forum
stuck in tri color screen
im also having this tri color screen problem... and mine the screen says..
---------------------------------
| RUU |
|IPL 2.21.0001 |
| |
| |
|SPL 2.21.0001 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| USB |
---------------------------------
thats all.. every time when it reaches 99% it goes stuck for 2 minutes
and says
ERROR [302] : UPDATE ERROR
The ROM Update Utility has encountered communication errors during the update process. The program will guide you step-by-step to recover from the errors so you can continue the the update.
and done the recovery as the guided.
this has happend for 3 times...
help me ...
You have a G4, and its CID Locked. You'll need to flash the Wizard_Love rom - it will install sucessfully on G4 Cid Locked - and then cid unlock it, before trying to install any other ROM. You need to be carefull not to flash rom's with IPL/SPL information, that includes official ones from T-Mobile!
My ELF (Soft Black) is also stuck in the tri-color screen after trying to flash it.
IPL 1.15.0002
SPL 1.15.0000
Please HELP!!!!
First of all, thanks to all the uber-smart people in the forum that make new toys for my Wizard!
Rabbid, if yours is a Wizard G4, install the Wizard Love ROM as dferreira suggested. If you don't know, check sticky posts on how to ID your phone.
I had the same problem, stuck at the loader screen, because I forgot to soft-unlock my phone.
That's the last time I reflash my phone at 2 AM, after being up since 6AM the previous day
Wizard Love was useful for me!
I had the same problem (tricolor screen), but I flashed my Qtek A9100 and it came again! (I´m so happy)
the rom that I used was Wizard_Love_2.26.10.2.
I hope it be useful for all you, guys!
I have a question. If I was wrong flashed G4 Hard-SPL unlocked device, can I fix the problem using RUU? Usually, I used soft-SPL.
Thanks for the responses on this thread! lol
I used the Wizard love and I do have a g4 phone I checked a million times.
I used the process to Hardspl my T-mobile Wizard and when I turn the phone completely off and on it is the Love Wizard. I got the steps from the XDA Developers Wiki Site.
I wanted to use the Slim Edition of WM6.1 and I have downloaded the zip( or rar) but what do I need to do next. I thought I knew about the flash process because I had experience flashing with GBA and SP but apparently I know nothing.
What I originally did was run the hard-spl G4 program but when the screen popped up to install a ruu ( or the os i gussed) I closed out of it and instead opened the boot loader program that was located in the Slim Edition Folder. I lost connection to my g4 at the white screen...naturally panicked for 30 mins and then realized the soft reset button and did the manual boot loader screen. I then read this forum about the love wizard so just installed it out of fear to try the slim version again.
Also, the XDA Developer process says that the HardSPl process unlocks both SIM and CID is that incorrect? And do I need to be concerned with downloading Radios for my g4 model? Any help or flame would be appreciated at this point. Thanks.
All I want to do is use the T-mobile Wizard (g4) with WM6 or MW6.1 and for it to be unlocked.
Again, Thanks for your time
wafrea said:
Thanks for the responses on this thread! lol
I used the Wizard love and I do have a g4 phone I checked a million times.
I used the process to Hardspl my T-mobile Wizard and when I turn the phone completely off and on it is the Love Wizard. I got the steps from the XDA Developers Wiki Site.
I wanted to use the Slim Edition of WM6.1 and I have downloaded the zip( or rar) but what do I need to do next. I thought I knew about the flash process because I had experience flashing with GBA and SP but apparently I know nothing.
What I originally did was run the hard-spl G4 program but when the screen popped up to install a ruu ( or the os i gussed) I closed out of it and instead opened the boot loader program that was located in the Slim Edition Folder. I lost connection to my g4 at the white screen...naturally panicked for 30 mins and then realized the soft reset button and did the manual boot loader screen. I then read this forum about the love wizard so just installed it out of fear to try the slim version again.
Also, the XDA Developer process says that the HardSPl process unlocks both SIM and CID is that incorrect? And do I need to be concerned with downloading Radios for my g4 model? Any help or flame would be appreciated at this point. Thanks.
All I want to do is use the T-mobile Wizard (g4) with WM6 or MW6.1 and for it to be unlocked.
Again, Thanks for your time
Click to expand...
Click to collapse
Well,as you mentioned,its a G4 phone,it cannot be CID unlocked completely like a G3 device,however,it can be upgraded to wm6 with 'SoftSPL' or 'HardSPL',if you apply "hardSPL' it'll semi CID unlock the phone by flashing a patched IPL/SPL to the phone to trick it to think its CID unlocked temporarily,but it'll stay CID unlocked and "HardSPL' as long as you intentionally don't remove it and you can flash any wm6 or wm6.1 Rom on it. But always be warned that don't ever flash any Rom which have IPL/SPL included in it,it'll 'Brick' the phone.
Did you apply 'HardSPL' successfully ? what IPL/SPL... ? it displays at present.
Secondly,if you didn't have any signal quality or call missing problem with your present Radio Rom installed,then there's no need to upgrade.Some custom build wm6 or 6.1 Roms,do already include updated Radio Roms,which get flashed durinf Rom (OS) upgrade.
Thanks so much for responding.
I don't know what all happened to be honest. When I was using the Hardlsp G4 program after I got the white screen I thought I would cancel the rom that it wanted to install and install the Slim Edition. I was thinking that it was installing an OS and I wanted to substitute it for WM6.1 Slim edition I didn't know that I was cancelling out of the WM6 rom softspl . So to be honest I though I just Hardslp it but I didn't use the softslp which comes with the temporary CID unlock? Maybe that sounds right lol.
Regardless, Now I'm tring to figure out what to do obviously this phone works with T-mobile only and so I thought I could CID Unlock it and SIM unlock it with that program and now I'm thinking i'm screwed lol.
If I followed the HARDSLP directions again to the letter would I get the phone temerporarly CID & SIM unlocked so I can use it or have I messed it up to much? Oh, and the phone seems to be getting a signal although I can't call anyone but the bars are showing beside the indicator.
I did get an issue were when my phone went white it dissconected from activesync and so I had to manual get to the bootloader screen anyway.
Thanks zabardast_1
IPL/SLP 2.25.0001
GSM 2.25.11
OS 2.26.10.2
wafrea said:
Thanks so much for responding.
I don't know what all happened to be honest. When I was using the Hardlsp G4 program after I got the white screen I thought I would cancel the rom that it wanted to install and install the Slim Edition. I was thinking that it was installing an OS and I wanted to substitute it for WM6.1 Slim edition I didn't know that I was cancelling out of the WM6 rom softspl . So to be honest I though I just Hardslp it but I didn't use the softslp which comes with the temporary CID unlock? Maybe that sounds right lol.
Regardless, Now I'm tring to figure out what to do obviously this phone works with T-mobile only and so I thought I could CID Unlock it and SIM unlock it with that program and now I'm thinking i'm screwed lol.
If I followed the HARDSLP directions again to the letter would I get the phone temerporarly CID & SIM unlocked so I can use it or have I messed it up to much? Oh, and the phone seems to be getting a signal although I can't call anyone but the bars are showing beside the indicator.
I did get an issue were when my phone went white it dissconected from activesync and so I had to manual get to the bootloader screen anyway.
Thanks zabardast_1
IPL/SLP 2.25.0001
GSM 2.25.11
OS 2.26.10.2
Click to expand...
Click to collapse
Well, with your present IPL/SPL 2.25.0001,its not HardSPL,as you say it didn't complete and you closed it,therefore,its still with its original official bootloaders (IPL/SPL),no harm is done yet.
Now,if you wish to upgrade the phone to wm6,either you can do it with SoftSPL, which'll just temporarily trick the phone into CID unlock and flash the rom,but it'll revert back to CID locked status after the reboot of the phone and if you wish to replace the rom,you'll again have to apply SoftSPL again.Every time you want to change roms,you'll have to apply SoftSPL,but if you apply HardSPL once,it'll remain HardSPL and temporarily tricked into CID unlocked status till you don't remove it.You don't have to apply HardSPL again and again to flash roms,its possible to flash roms easily.but never flash a rom which contains IPL/SPL in it even the official Rom in HardSPL status.If ever you wish to revert back to official rom,first remove the HardSPL and flash the official Bootloaders (IPL/SPL) and then flash the official Rom.
Ahh Thanks a Million.
Zabardast_1. I know it sucks explaining that stuff a million times but it really helped me.
So, If I was wanting to get the Slim Edition WM6.1 I could just
Run HardSLP Program and complete the stepes provided
Then hook the phone up to the computer while its in windows os and then click the bootloader app for Slim Edition? Thus Installing Slim Edition
Then use the the lolwoz03 program to unlock my sim?
Or would the last step not be needed because of hardslp?
I do have Love Wizard on here so when I start the phone up those isp/lsp is what i got.
I think thats the last of my questions and then i'll leave you all alone lol
wafrea said:
Ahh Thanks a Million.
Zabardast_1. I know it sucks explaining that stuff a million times but it really helped me.
So, If I was wanting to get the Slim Edition WM6.1 I could just
Run HardSLP Program and complete the stepes provided
Then hook the phone up to the computer while its in windows os and then click the bootloader app for Slim Edition? Thus Installing Slim Edition
Then use the the lolwoz03 program to unlock my sim?
Or would the last step not be needed because of hardslp?
I think thats the last of my questions and then i'll leave you all alone lol
Click to expand...
Click to collapse
Yup! First apply 'HardSPL' correctly,read the HardSPL thread carefully understand the method and do it correctly and let it complete,the screen will certainly go white,don't be afraid,its the essential part, it'll only take a minute or so,if it doesn't go white,then consider something is not correct ,after successful application of HardSPL,the phone will reboot and IPL will be 2.21.0001 and the SPL is 2.21.olip,it confirms the successful application of HardSPL.Now its ready to flash any wm6 or 6.1 rom,just hook up the phone and run the RUU in the rom,it'll start to upgrade
Well,regarding SIM unlock with lokiwiz03,you shud do it before HardSPL its much recommended.HardSPL will only flash the patched IPL/SPL which let your device think it has SuperCID (aka CID unlocked) but doesn't SIM unlock,for SIM unlock you have to use lokiwiz03 and generate a SIM unlocking code which you'll insert when using another SIM.
Well, Thanks again
All I know is when I run Lokiwiz it says it can't copy files and it might be inuse. So if there is a better way of unlocking or a way of unlocking the sim after i do the hardslp i'm up for it haha whatever works the best. I think it says it can't find the C:/windows/itsutils.dll and then it says it can't save a certian bat file because it doesn't exsit.
Okay I fixed it by copying the files Cert_SPCS and EnableRapi to folder Lokiwiz03 was in on my computer.
Well, I ran the SlimEditon romupdate utility and it took my phone to tri color screen then activesync discconected and it says it can't connect to my phone now. So did I click on the wrong program?
Thanks a million + Zar
I read something like If I take the .nbf file and transfer it into the muns ruu folder and run muns ruu that it should fix it but it says something about an aku and far when i start the program so I'm hesitent. Also I'm stuck in the Bootloader screen? Should I use the wizard love rom again and then when it finishes use the slimedition with muns ruu?
Well I did that from the bootloader screen (tricolor Screen) and slimedition works the only thing that sucks is that it still shows the wizard love pic when displaying my ipl slp and gsm info...
wafrea said:
Well, Thanks again
All I know is when I run Lokiwiz it says it can't copy files and it might be inuse. So if there is a better way of unlocking or a way of unlocking the sim after i do the hardslp i'm up for it haha whatever works the best. I think it says it can't find the C:/windows/itsutils.dll and then it says it can't save a certian bat file because it doesn't exsit.
Okay I fixed it by copying the files Cert_SPCS and EnableRapi to folder Lokiwiz03 was in on my computer.
Well, I ran the SlimEditon romupdate utility and it took my phone to tri color screen then activesync discconected and it says it can't connect to my phone now. So did I click on the wrong program?
Thanks a million + Zar
I read something like If I take the .nbf file and transfer it into the muns ruu folder and run muns ruu that it should fix it but it says something about an aku and far when i start the program so I'm hesitent. Also I'm stuck in the Bootloader screen? Should I use the wizard love rom again and then when it finishes use the slimedition with muns ruu?
Well I did that from the bootloader screen (tricolor Screen) and slimedition works the only thing that sucks is that it still shows the wizard love pic when displaying my ipl slp and gsm info...
Click to expand...
Click to collapse
Your phone is still running wizard_love_rom,it didn't upgrade to slimEdition,perhaps its still not correctly with HardSPL patched IPL/SPL,did you get it HardSPL ?
Well, everything else works fine. I think I soft flashed my phone back when I messed up and so it reset the loader screen with the ipl spl info and then when I hard Slp over top of it the hardslp just didn't remove the screen. It says all the information that it should it just has that love picture on it that is kinda emberresing but I'll live with it to have a working phone and not a shinny brick.
Thanks for everything again and again Zar, Unless you can tell me how to show the battery life correctly on the main screen in Slim Edition I finally don't have anymore questions for you . lol
Thanks
hi everyone, can someone please tell me what i did wrong.
I have flashed a few roms before and this time every time i start the 8125 it gets stuck cingular raising the bar screen.
The phone will still do hard reset.
Ipl 2.25.0001
Spl 2.2.5.001
Gsm 02.25.11
OS 11.0.1.1
I tried to do upgrade it to the the TNT 19199 professional wizard v.2. I used the shell tool and dropped the nk.nbf file into the shell folder like i have always done before and this time its stuck at the same screen. I can't connect it to active sync or even the computer to put back the stock cingular rom back in. Can someone please tell me what im doing wrong, from what i understand the phone is not bricked yet because i can still do a hard reset but still sends me back to the main startup screen. Help please.
Stock ROM can be flashed from Bootloader mode, just put your Wizard into bootloader mode (Camera+reset), then run the stock ROM RUU.
thanks helped out perfectly
Same Problem
New to this...Could someone Please give me a walkthrough on how to do this.I can still hard reset.I reset using camera + reset...Brings up r/b/g screen.I don't know how to flash from there.Any help is greatly appreciated.
IPL 2.25.0001
SPL 2.25.001
OS is 10.0.0.10
I took it back to WM5.Seems to be OK.Gonna try using Wizard Service Tool instead of ShellTool.See what happens
You should HardSPL, then use RUU on ROMs without IPL directly.
My first attempt to upgrade to AP4 did not succeed unfortunately (SPL to 3.50 upgrade went OK though), my power light stayed green and the display wouldn't come on.
So I took the Athena into bootloader and re-flashed back to AP3.
All seemed fine, the "Tap the screen to set up your device" screen appeared, I set it up and let the customization program run.
Unfortunately after the automatic reset at the end of the customization program, the device returned to the "Tap the screen to set up your device" and the customization program started again...
I tried interrupting the customization by soft resetting before it started executing itself, soft resetted during customization, let customization finish again (and again), but the device seems to be in an endless loop....
Any suggestions/help?
Thanks a lot in advance!
this happen because the spl and the kernel, AKA nk.exe, do not match. not sure what to do except try the new ap3 the cmonex posted **not sure if you tried that**
try the 3.0 cmonex posted and enjoy.
solved!
Thanks irus & Pawel062 (and cmonex!), that did the trick!
Probably not a bad idea to advise anybody who needs downgrading from AP4 to AP3 to use that rom. Download it from http://htc-hackers.com/uploads/ap3newspl.zip
See cmonex' thread at http://forum.xda-developers.com/showthread.php?t=386604
***great Information!***
HEY ALL,
I WAS ALSO HAVING SOME ISSUES VERY SIMILAR TO THESE WHILE TRYING TO "DOWNGRADE" TO ANY ROM FROM AP 4.0. THIS IS GREAT INFO AS I BUILD MY OWN ROMS CONSTANTLY, SO I WAS A BIT WORRIED WHEN I COULDNT SWITCH AFTER TRYING AP 4.O, BUT THANKS TO CMONEX, IRUS, & PAWEL062, WE CAN DOWNGRADE A BIT EASIER!
THANKS AGAIN!
M E G
I downloaded the http://htc-hackers.com/uploads/ap3newspl.zip
can anyone tell me the steps
note i'm stuck into the bootloader
mgozamy said:
I downloaded the http://htc-hackers.com/uploads/ap3newspl.zip
can anyone tell me the steps
note i'm stuck into the bootloader
Click to expand...
Click to collapse
just flash it with normal RUU
I have this problem of the "looping" with the customizations. My problem is that I can't get the device to a state where it is "talking" to activesync and from what I see, I need that to push this ap3spl new file.
When you say "just flash it with normal RUU" can you tell me what that means please? (sorry, noob here...) I've spent hours on the forums, wiki etc and I'm a bit lost.
I'm "trying" to get AP4 w/WM6.1 onto the device.
Purchased unlocked (new) and used on AT&T for 6 months.
Went to update the radio to 1.57 and used the unlocker first. (took out SIM/SD first of course).
Got past step one and then got a black screen on reboot...
I got AP3 to load but now I get this fun looping.. Setup device, load customizations, reboot, and start over.
Sounds like this file in this thread is my fix to at least get AP3 working but not sure how to apply. Can I do it from the bootloader?
thanks in advance for putting up with me
Oh yeah:
My current state:
ATHE100
IPL - v2.02
ATHE100 MFG
SPL -v3.50 OliNex
Eureka!
Ok, I'm not a COMPLETE noob.. (close). I'm up and running. AP3 (new spl) loaded, then loaded AP4. Woo Hoo!
No GPS
Well, I guess I'm "Almost" back up and running.
Since step three never got kicked off, it looks like my GPS rom/radio never was rewritten back to the device.
Any help on how to get just the GPS portion back?
Endless loop after flashing AP4
I have a similar problem. My Dopod U1000 was running WM6 and I upgraded to
radio version 1.58.00 no problem. After flashing AP4 I am in a cycle where my initial boot screen has black and white lines at the top and black at the bottom
Then get the Windows Mobile 6.1 screen and after automatic customizing the
PDA resets itself. I have tried to flash the AP3newspl file but it cant communicate successfully with the synced PDA. Any help?
Johnatara said:
I have a similar problem. My Dopod U1000 was running WM6 and I upgraded to
radio version 1.58.00 no problem. After flashing AP4 I am in a cycle where my initial boot screen has black and white lines at the top and black at the bottom
Then get the Windows Mobile 6.1 screen and after automatic customizing the
PDA resets itself. I have tried to flash the AP3newspl file but it cant communicate successfully with the synced PDA. Any help?
Click to expand...
Click to collapse
get into bootloader by pressing camera+reset and check your spl
you can flash a rom from here
also read this
http://forum.xda-developers.com/showthread.php?t=429013
Thanks lakeman. I reinstalled WM6 ROM from the boot loader.
My IPL v1.00 and SPL v1.20. Olipro and Radio 1.58
I have transferred enblerapi.cab to PDA and run it each time but when I flash
AP4 ROM or AP3newspl ROM I get an endless loop and my SPL stays v1.20
I cant seem to get a flash of SPL3.5 which I suspect is the problem.
Am I missing something?
Il download non funziona.
hey, im new but have read many of the pages here. i have burnt roms to my first wiz (G3) unlocked it and everything went well. i came about a wiz (G4) last week wm5 bland rom locked and want to get wm6 on it so after my research i went to the IMEI unlock site and purchased the unlock for the g4
the unlock seemed to go well the first time but, it won't come out of boot loader mode
i ran hornet o.10 for g4 it runs and completed to 100 % and then on reboot it comes up with the boot screen again
IPL 2.21.0001
SPL 2.21
i ran the tnt 1933 rom this morning and it completed 100% but still i have a boot screen
i know im missing something the battery power is fine .
i downloaded the stock rom for cingular but it won't load it has error "(294) INVALID VENDOR"
any suggestions ...
thanks in advance for your input
Airborne_Pathogen said:
hey, im new but have read many of the pages here. i have burnt roms to my first wiz (G3) unlocked it and everything went well. i came about a wiz (G4) last week wm5 bland rom locked and want to get wm6 on it so after my research i went to the IMEI unlock site and purchased the unlock for the g4
the unlock seemed to go well the first time but, it won't come out of boot loader mode
i ran hornet o.10 for g4 it runs and completed to 100 % and then on reboot it comes up with the boot screen again
IPL 2.21.0001
SPL 2.21
i ran the tnt 1933 rom this morning and it completed 100% but still i have a boot screen
i know im missing something the battery power is fine .
i downloaded the stock rom for cingular but it won't load it has error "wrong update utility"
any suggestions ...
thanks in advance for your input
Click to expand...
Click to collapse
Are you sure SPL is 2.21 and not 2.21.0001 as IPL 2.21.0001 ?
Well,if its 2.21 only,the phone's got mixed Bootloaders (IPL/SPL),IPL 2.21.0001 are G4 and SPL 2.21 is G3,I don't know how you got it,but your phone is 'Bricked'
mmm it figures
so it appears there could be a problem with the imei program,
as i said it never came out of boot mode after the unlock
and no errors were shown ...
i could get another and replaced the main board, this one is in new condition
except for the custom bricked rom . in the future i will not play with a g4
thanks for the diagnosis, no way to flash a new spl / ipl ... i did read that if
it booted you could get it back in some chance cases .. i am curious as to how this happened (others not doing this for a hobby could brick there only phone)
step 1 - ran imei unlock
never came out of boot mode after
2- flashing the to above roms said to be G4 safe
i never look to see what the ipl / spl were before
i looked with the wizard tool but didn't save it
well you live and learn, it's good for parts now off to ebay for another crack at it ...
thanks everyone ... the best thing about this phone is everything you can do to it
with help from those who know ...
I recommend trying to flash back to original service provider ROM, then unlock again and try another. As long as you can get to bootloader (tri-color screen), there's still hope for your phone. When it's in this mode, and you plug in the USB, does it say USB at the bottom of the phone screen? If so, you are not dead yet.
Custom build wm6 roms like TNT etc... never Brick a G4 phone as no IPL/SPL is included in them,they are completely safe for G4 devices.What I can gather,it must be the wrong imei unlock code perhaps.
Well,like Myrddin Wyllt said,there's no harm in trying,so if it gets into Bootloaders,try to flash the official rom and if there's an error "wrong update utility" ,replace the RUU in the rom with this RUU and run this RUU,hope it might work.
Myrddin Wyllt said:
I recommend trying to flash back to original service provider ROM, then unlock again and try another. As long as you can get to bootloader (tri-color screen), there's still hope for your phone. When it's in this mode, and you plug in the USB, does it say USB at the bottom of the phone screen? If so, you are not dead yet.
Click to expand...
Click to collapse
yes sir i can talk to the phone from xp pro ..
USB does come up
so i can swap the RRU with the nbf file i need ...
no file name change required on the xxx.nbf file
thanks alot for the(schooling) advise ... i was going to need to brick another to make some book ends... this could save me that
stuck
Airborne_Pathogen said:
yes sir i can talk to the phone from xp pro ..
USB does come up
so i can swap the RRU with the nbf file i need ...
no file name change required on the xxx.nbf file
thanks alot for the(schooling) advise ... i was going to need to brick another to make some book ends... this could save me that
Click to expand...
Click to collapse
ok, i swapped out every RUU i could find i get errors from
read file
invalid vendor id
wrong update utility
im too new to figure this out ..can you extract a ipl / spl from an
official rom and then flash that to get the boot loader's back in sync
i found the att 8125 ipl /spl nbf when i flash, it runs to 100% reboots but no changes
anyone have a link to flashing just the ipl / spl on the g4
i am most thankful for any advise ..
try running the hardspl on phone, it might just work to revert it back to a G4 spl.
Link to HardSPL : http://forum.xda-developers.com/showthread.php?t=332320
and G4 ipl and spl here : http://forum.xda-developers.com/showthread.php?t=342744
Also I paid to the IMEI Check and I had to change the plate because the PDA died as yours. E had not returned to the money of the IMEI Check only reply to me was that it had to change of plate ..... It had the unblocked CID?
bastards
yes they won't return my money ... somehow they bricked my phone
i would use the hard /spl and not the imei those guys are assholes