Hello to all,
I have a Imate jamin G4 that does not start.
while i was downgrading it from wm6 to wm5 (novendor) the process hangs at 64%.After 3 hours i disconnected it from pc.Now i m getting a three+1 white color screen with written RUU on upper right corner but i m not able to perform any rom update on it. I hv tried diff. pc, and diff. os but always getting Connection errors. PLZzzzzzzzzzzzz Helllllllllllllllppppppp
Check the wiki
Related
Hi,
I had a WM6 Rom, pre-release, one of the Self Made available here ... I do not remember which one of the versions ...
I wanted to put the official WM6 rom, so this morning I downloaded and I tried to install it.
The installation started with my Tytn connected, the Tytn screen switched to HERM IPL-1.00 and the Red, Green, Blue, White Stripes ... and the installation continued.
Then I received a connection error from the Program ...
Now my Tytn is stuck on the "Stripes" Screen and even removing the battery and resetting ... the Stripes screen is always there ...
Any Clue ?
Thanks !
submaru said:
Hi,
I had a WM6 Rom, pre-release, one of the Self Made available here ... I do not remember which one of the versions ...
I wanted to put the official WM6 rom, so this morning I downloaded and I tried to install it.
The installation started with my Tytn connected, the Tytn screen switched to HERM IPL-1.00 and the Red, Green, Blue, White Stripes ... and the installation continued.
Then I received a connection error from the Program ...
Now my Tytn is stuck on the "Stripes" Screen and even removing the battery and resetting ... the Stripes screen is always there ...
Any Clue ?
Thanks !
Click to expand...
Click to collapse
Ok ... Classic noobing: do a search before posting ... I am looking at the "Help post for bricking" and trying the solutions, but I have to understand why bricked ...
I love this forum ...
Recovered my Tytn: I was in this case
SPL 1.01MFG
HTC_BOOT Any
Boot OS No
No GSM? No
KITL No
Diagnostic Solution: Stuck in bootloader after flash Mtty: "set 14 0" and "task 8" if doesn't help flash OS.nb again.
With those magic command, my Tytn restarted and booted !!!
Some more informations:
I have Rom WM 6.0 Custel 2.5 Version (ROM Date 04/17/07)
Radio Version 1.43.00.00
Protocol Version: 32.76.7020.19H
I tried to flash the Official HTC WM6 Italian, and you know the result ... What's worng ? Thanks
hi all, hope someone can help, been reading threads for days and this is about my fifth xda so i'm no newb.
it's an i-mate jamin i got for my father, ipl/spl 2.13.0001 (G4) bought second hand from ebay, seems to work fine running wm5 os 2.13 but won't send text messages, didn't think much of it since i was planning to upgrade to wm6.1, unfortunately NO KNOWN METHOD WORKS.
Here's what i've tried:
Two different windows xp computers, two different cables, re-install activesync, hard reset, multiple connection retries.
PDAViet temp step 1 from OS and Bootload, most common error is [264], tried NVID wm5, tried official IPL 2.20.0001 upgrade and official i-mate ROM, tried jump/soft/hard SPL, all go to white bootload screen but no further, sometimes the green LED will flash as a radio signal on this white screen but usually nothing.
It seems very much to me like the bootloader is not responding, can someone please tell me when you put the phone in the bootloader and plug the usb cable in, after it has said USB, if you then unplug the cable should the USB text dissapear? because on mine it remains..
when running hardspl.bat the only error on the script is;
cerun: program could not execute (0), after trying to run jumpspl, altho it DOES go into the white screen and just sit there, yes i've tried pressing the camera button.
I'm fresh out of ideas here! help please!
when i run Prophet_G4_IPL_v2.20.0001.exe after a hard reset (sticks on bootloader and give [264]) but before that it says upgrade from 1.2.0.0 to 2.20.
That first number doesn't seem right? is it possible the previous owner flashed a G4 ipl onto a G3 device? and how would I tell?
Hi,
i have a friends I-Mate JAMin (or HTC Prophet)
its a G4, now...it was running WM5, so i put HardSPL on it, went to flash a WM6.1 rom and now all it does is sit at the tri coloured screen, it seems like the HardSPL has done nothing, because the SPL is still the old numbers (the originals, it hasnt changed to 2.G4.4PDA, or whatever its suppose to show)....
I need help ASAP, i cant go back to my friend and tell him his phone is stuffed..
PLZ HELP, ANYONE....PLZ
hi,
did u try this
http://forum.xda-developers.com/showthread.php?t=353547
yep, tried that.
i actually cannot boot into a OS on the phone,
when it turns on it goes straight to the Tri-Coloured screen, i need some desperate help with this,
i have put HardSPL on there but the SPL version on the tri-coloured screen numbers have not updated to a new version,
i installed an update to the IPL version, so that has gone up to 2.20 or something like that.
the SPL number is currently 2.13.0001
i cannot get past the tri-coloured screen.
PLZ PLZ PLZ PLZ PLZ help, is the phone stuffed?
how do i fix it?
Dont Worry
If your scree show RUU and you see USB in the left corner when connecting USB - then dont worry.
Just fksh it with a NVID wm5 Prophet ROM that is available in this forum and tou will have your device back.. you can then try to upgrade it to WM6 etc
hi ,green screen with horizontal lines came up with missing gsm line on my prophet while flashing with wm6.5 21234 ,then i tried to put gsm file and it stopped at boot screen tricolor one so i returned back to nvid wm5 which flashed it till 95% and gave an error at 100% and rebooted to tricolor again where i clicked on ruug4 file in update hardspl folder and after this it made reboot to wm5 (but wifi didn't work) so i gave it hardspl in updatehardspl folder and later flashed it with wm6.5 but wifi doesn't work and 1st splash screen is ok but second splash screen never shows up (instead green horizontal lines with ipl spl gsm and os come up and later 3rd splash screen comes up) wifi is not working in wm5 or wm6.5 with comm manager or quickmenu either.
has wifi hardware got spoilt ?(is there anyway to test it or correct it)
i have flashed to wm5 to wm6.5 twice to make sure i wasn't doing anything wrong.
also i tried alot of splash screen files but second splash screen remains those horizontal green lines only.
green lines liook like this http://www.dragoncub.net/htc/mda/boot.jpg
wifi is important to work.(green lines are acceptable unless they are interlinked with wifi)
kamalneet said:
hi ,green screen with horizontal lines came up with missing gsm line on my prophet while flashing with wm6.5 21234 ,then i tried to put gsm file and it stopped at boot screen tricolor one so i returned back to nvid wm5 which flashed it till 95% and gave an error at 100% and rebooted to tricolor again where i clicked on ruug4 file in update hardspl folder and after this it made reboot to wm5 (but wifi didn't work) so i gave it hardspl in updatehardspl folder and later flashed it with wm6.5 but wifi doesn't work and 1st splash screen is ok but second splash screen never shows up (instead green horizontal lines with ipl spl gsm and os come up and later 3rd splash screen comes up) wifi is not working in wm5 or wm6.5 with comm manager or quickmenu either.
has wifi hardware got spoilt ?(is there anyway to test it or correct it)
i have flashed to wm5 to wm6.5 twice to make sure i wasn't doing anything wrong.
also i tried alot of splash screen files but second splash screen remains those horizontal green lines only.
green lines liook like this http://www.dragoncub.net/htc/mda/boot.jpg
wifi is important to work.(green lines are acceptable unless they are interlinked with wifi)
Click to expand...
Click to collapse
1. It sounds like the disk partition was being disturbed with a fault address,
2. you are lucky that your Prophet is still alive,
3. try this official rom upgrade from dopod (uploaded ) (WM5, may be useful... , it won't brick you device for at least )
dioxda2 said:
1. It sounds like the disk partition was being disturbed with a fault address,
2. you are lucky that your Prophet is still alive,
3. try this official rom upgrade from dopod (uploaded ) (WM5, may be useful... , it won't brick you device for at least )
Click to expand...
Click to collapse
thanx mine is imate jamin G4 so would it be right to put in this dopod rom and is it G4 ,i also have original imate jamin rom which usually doesn't run because i made all these wm6.5 changes.
also battery is being used very fast now unlike before.
Edit:yours gave error when i put jamin original it stuck up at 100 % i rebooted to tricolor and the clicked on ruug4 in hardspl folder and then again rebooted to wm5 for 3rd time this time. and no wifi ...then wm6.5 and no wifi .
i guess wifi hard ware and second splashscreen area got spoilt .
Edit battery is ok but wifi is not .
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
mahi58 said:
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
Click to expand...
Click to collapse
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Thanks
bikertibi said:
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Click to expand...
Click to collapse
Thank you very much, my problem solved using the WM5 flashing process.
I thought it's impossible to get the phone connected to PC because activesync wasn't establishing a connection to the phone, but obviously I was wrong.
After flashing WM5, I performed a HSPL on the phone, and then used the file again, and the phone was upgraded to WM 6.5 with no problem.
I previously had downloaded your 6.5 ROM from a crappy forum, which was only including a download link and some useless info, and since I was a newbie myself D), I didn't even know that I should have performed a HSPL before upgrading the OS.