i lost my windows folder on my wizard, when i try to update my rom, it starts but looses connection at bootloader mode.what shuld i do?? help me .. waiting..
Fully charge your battery and try again (You can switch off the Wizard in bootloader by press and hold power key).
Related
Dear Pro!
please help me! My XDAII uprom finish ! it alway Hardreset .I uprom again It error and now bootloader not run anymore .i'don't know why .Please help me!
Thanks !
ok, don't lose it just yet.
first thing to try is the "vulcan death grip" on the pda; simultaneously press the power button, soft-reset button, and middle button on the scroller on the front of the PDA to enter bootloader mode, if you do it right, then the version number will appear at the bottom of the screen (i.e v1.06) and you will thus be in bootloader mode.
failing that, remove the battery from the PDA, and leave it like that for about an hour so the backup battery can die, then put the battery back in and pray it enters bootloader mode.
I need to upgrade the SPL on my SPV C550 now that I have unlocked it (trying to install WM6)
Do I have to buy a mini SD card reader or can I use tools to do this from my PC.
If so which tools please and briefly how.
Cheers
John
john72821 said:
I need to upgrade the SPL on my SPV C550 now that I have unlocked it (trying to install WM6)
Do I have to buy a mini SD card reader or can I use tools to do this from my PC.
If so which tools please and briefly how.
Cheers
John
Click to expand...
Click to collapse
Although a search would solve your problem here is a mini how to:
- you need to have ParchedRUU (this includes these files: EnterBootLoader.exe, Patched_RUU.exe, ROMUpdateUtility.exe, RUUGetInfo.exe and finaly your_bootloader_name.nbf) all in the same directory. The files are availabe on the net just google it.
- establish an activesync connection with USB, to do so have the phone in standby mode (no bootloader mode)
- when connected in activesync (green icon on taskbar) run the Patched_RUU.exe
- make sure you tick the boxes and the next button and that phone battery is greater than 50%
- in the final screen hit the update button, if the .nbf is in the same directory as the Patched_RUU it will load it automatically
- wait for 3 minutes, during this time you phone will enter bootloader mode, and a red bar will show the progress on the phone and the computer
you are all done
- mike
Cheers mate that did the job.
Next I guess I get into boot loader mode and then use mmty.exe?
Any clues please on how to get into boot loader mode.
john72821 said:
Cheers mate that did the job.
Next I guess I get into boot loader mode and then use mmty.exe?
Any clues please on how to get into boot loader mode.
Click to expand...
Click to collapse
again search m8!
anw here it goes:
- go to active sync -> settngs -> disable USB connections
- switch off your phone, and while holding the camera button connect it to the USB, on the screen it will appear "Need UI upgrade? (0)" or something like that.. bottom line is press 0
- then phone enters bootloader mode. if on the lower bar i think it is the green bar it says hurricane and on the right UI then it is all good, if it says something like XIP or something then you have to switch it off and do the proccess from the begining with the camera button REMEMBER TO PRESS THE 0
- fire up the mtty.exe, remember put mtty.exe AND the bin in the C:\ directory. The only thing you need to change in the startup screen of mtty is the connection port change from com1 or something to usb and press ok
- press enter so the Cmd> shows on the blank terminal
- write without quotes "l c:\name_of_your_rom.bin" and hit enter. l is a small L short for load
- hopefully it will do the update, wait for ~10 mins and it will say that it is all done... depending on your rom you may have to change language and so...
hope this helped
- mike
Sorry to carry on a bit but I get this when I do what you suggested.
Cmd>l C:\wm6.bin
clean up the image temp buffer at 0x8C080000 Length 0x01C40000
MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Ive Googled this and im sure ive unlocked my phone - but is that the same as unlocking the super CID?
i dont remember man, are we allowed to post links to other sites? anw follow this guy's tutorial it is allmost the same
http://karhoe.byethost33.com/content/view/35/1/
- mike
help..
need to flash phone from boot loader mode..no standby mode..how do i do that???
HELP!!!!!!!!!!!
Just follow my guide in the signature, but use huricane ROM instead, you need to get into the bootloader and enable AS USB mode, then run the RUU
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
when i press the power button the fone gives the white disply and nothing else happens.
i cannot even get into bootloader.
the charging function works when the fone is turned off.
when i turn on the fone it dos nothing not even chaging.
is there any way to get my old fone back...
help plz
i shall be very thankfull to you.
DEAD SPV
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
when i press the power button the fone gives the white disply and nothing else happens.
i cannot even get into bootloader.
the charging function works when the fone is turned off.
when i turn on the fone it dos nothing not even chaging.
is there any way to get my old fone back...
help plz
i shall be very thankfull to you.
Where I can find the latest SPL for C550?
Dear All:
I bricked my device unfortunately. I am trying to go to bootloader mode but it's not working. I pressed down simultaneously the botton right below the volume down botton and the opposite botton. While both bottons pressed, I powered on the device.
However unfortunatley, it's not working. Please advise the propoer bootloader sequence for HTC Startrek / imate smartflip.
Note I can not use jumpSPL simply because the device is brick and not booting
Samer.
samery said:
Dear All:
I bricked my device unfortunately. I am trying to go to bootloader mode but it's not working. I pressed down simultaneously the botton right below the volume down botton and the opposite botton. While both bottons pressed, I powered on the device.
However unfortunatley, it's not working. Please advise the propoer bootloader sequence for HTC Startrek / imate smartflip.
Note I can not use jumpSPL simply because the device is brick and not booting
Samer.
Click to expand...
Click to collapse
Don't power it on, while pressing both buttons, hold it, and connect your device to your pc. It will turn itself on in bootloader mode. After that install an official rom...
Pampooh said:
Don't power it on, while pressing both buttons, hold it, and connect your device to your pc. It will turn itself on in bootloader mode. After that install an official rom...
Click to expand...
Click to collapse
Thank you, it worked like a charm, however unfortunatley there is no luck.
Let me start by saying that I am trying to install your ROM, so I am delighted that you have personally answered me.
It went to bootloader mode, then after checking the image it returned saying Invalid Certificate.
Then I launched RomUpdateUtility from my laptop to try to install the ROM, it starts writing the ROM, then at 4%, the mobile restarts, and the upgrade utility displays Image Corrupted.
I tried to bring a different (WM6.1 SLIM found somewhere here in this forum) and copied the file to the memory, but received the same "invalid certificate" error.
May I ask you to please suggest a resolution for this problem? thanking you.
Sincerely yours.
Samer.
Hamdullilah it works.
I figured that if the rom is having a certificate error with the device then I should be able to return to the original rom.
so I went to ftp.clubimate.com and downloaded the original rom and install it, so it did successfully.
then I restarted the upgrade process only this time I did NOT do the same mistake again (not restarting after SDA Unlock) and i got my mobile running now like a sharm on Pampooh rom.
Thanks Pampooh, you are a saver.
Have a great day.
Samer.
Congratulations. Although I would suggest that you use the ROSE release since it uses less memory and is a bit faster than the NEO release. If you do decide to use the ROSE rom, try out PointUI Home2, it looks great. I have the download link in my 1.05b ROSE thread. Good day to you too.
true, but I used a WM6.1 slim version for a long time so it's time to change. The Neo interface is amazing and i dont really care about size, If needed, I could always use the external micro SD for storage.
I think NEO rom is fabulous, you should try it
ı want to load WM 6.1 V2 Pro to my smartflip. but when it is %52 the error occurred. than the phone is closed. when ı was open it the htc picture comes and the phone dosnt open . ı cant load it again because the phone dosnt connect to pc whit usb. please help me what ı must do?
which keys ı must press for bootlooder? please help me.
lanu42 said:
ı want to load WM 6.1 V2 Pro to my smartflip. but when it is %52 the error occurred. than the phone is closed. when ı was open it the htc picture comes and the phone dosnt open . ı cant load it again because the phone dosnt connect to pc whit usb. please help me what ı must do?
which keys ı must press for bootlooder? please help me.
Click to expand...
Click to collapse
volume down botton and the opposite botton. Hold it, and connect your device to your pc. It will turn itself on in bootloader mode. After that install an official rom...
Dear All
I have upgrade the atom with the atom rom WM6.5 21500. The rom was successfully upgraded but i don't like it. And when i tried to downgrade it to WM6.1, it didn't work. I have tried to enter bootloader but i can't, when the atom restart, they will not boot and restarting again and again. .
Please help in this matter..
thanks.
Qiky said:
Dear All
I have upgrade the atom with the atom rom WM6.5 21500. The rom was successfully upgraded but i don't like it. And when i tried to downgrade it to WM6.1, it didn't work. I have tried to enter bootloader but i can't, when the atom restart, they will not boot and restarting again and again. .
Please help in this matter..
thanks.
Click to expand...
Click to collapse
1. If your atom can goes into windows u can downgrade to 6.1 or 6.5 from my signature by using RUU from PDA viet.
2. If your atom can't goes into windows as well as boot loader, First you have to take out the battery for one or two minutes then put it back then try to enter boot loader again, if still not try the Second step by taking out the battery again then press and hold Reset + Camera button for one or two minutes then put battery back (keep pressing that button till u can see boot loader).
just want to add dolphin post
ur device is bricked, if and only if, ur device won't start normally... even if u press soft-reset, hard-reset, or even bootloader mode buttons. Before panicking, do da following:
Brick Test:
1. Make sure ur device has ample battery charge. If u're not sure plug it in with da wall charger for at least 10min
2. Remove ur battery for at least 1 minute
3. Replace ur battery while observing da LED lights
4. If da LED blinks once upon battery insertion, u might have hope yet
Da only way to upgrade on a semi-brick device, is to upgrade through bootloader mode. No bootloader mode, No upgrade possible - period.
Entering Bootloader Mode on Semi-Brick Atom:
1. Remove battery for for at least 1 minute
2. Press CAMERA+RESET(stylus) simultaneously
3. Insert battery while still holding da buttons
4. Release da buttons at da same time(u should see bootloader screen)
Note: Failure to hold the buttons at da same time during battery insertion will cause it not to work.
GOOD LUCK
dolphinxda said:
1. If your atom can goes into windows u can downgrade to 6.1 or 6.5 from my signature by using RUU from PDA viet.
2. If your atom can't goes into windows as well as boot loader, First you have to take out the battery for one or two minutes then put it back then try to enter boot loader again, if still not try the Second step by taking out the battery again then press and hold Reset + Camera button for one or two minutes then put battery back (keep pressing that button till u can see boot loader).
Click to expand...
Click to collapse
i follow all your step by step sugestion but it seems not working and i still cannot run into bootloader or switch to another O.S.
is there any other solutions you can give??
your help is very apprecciated.
knoxbrotherhood said:
ur device is bricked, if and only if, ur device won't start normally... even if u press soft-reset, hard-reset, or even bootloader mode buttons. Before panicking, do da following:
Brick Test:
1. Make sure ur device has ample battery charge. If u're not sure plug it in with da wall charger for at least 10min
2. Remove ur battery for at least 1 minute
3. Replace ur battery while observing da LED lights
4. If da LED blinks once upon battery insertion, u might have hope yet
Da only way to upgrade on a semi-brick device, is to upgrade through bootloader mode. No bootloader mode, No upgrade possible - period.
Entering Bootloader Mode on Semi-Brick Atom:
1. Remove battery for for at least 1 minute
2. Press CAMERA+RESET(stylus) simultaneously
3. Insert battery while still holding da buttons
4. Release da buttons at da same time(u should see bootloader screen)
Note: Failure to hold the buttons at da same time during battery insertion will cause it not to work.
GOOD LUCK
Click to expand...
Click to collapse
i follow all your step by step sugestion but it seems not working and i still cannot run into bootloader or switch to another O.S.
is there any other solutions you can give??
your help is very apprecciated.
dolphinxda said:
1. If your atom can goes into windows u can downgrade to 6.1 or 6.5 from my signature by using RUU from PDA viet.
2. If your atom can't goes into windows as well as boot loader, First you have to take out the battery for one or two minutes then put it back then try to enter boot loader again, if still not try the Second step by taking out the battery again then press and hold Reset + Camera button for one or two minutes then put battery back (keep pressing that button till u can see boot loader).
Click to expand...
Click to collapse
i follow all your step by step sugestion but it seems not working and i still cannot run into bootloader or switch to another O.S.
is there any other solutions you can give??
your help is very apprecciated.
while i was updating my t-mobile hd2 i unplugged the usb cable and now the phone is dead and it shows me just update crash. if someone can help me please do that. thanks
try to turn off ur device and turn it on with holding vol down to enter bootloader withr three colours then connect ur device and start flashing ur rom
i did that but it doesent want to start updating it stayes on 0%
Why in the heck did you unplug? Did you do that in the middle of the flash?
yes unfortunately did that