Related
no my phone wont reboot at atll it turns on goes to a screen that says htc smart mobilty test only not for sale and in red below that it says no radio and doesnt go any further!!!!
please help me like seriously its not even my phone i need to straighten it out for him asap!!!!! i will even pay if some one can help me
press the power + camera + reset, load in the rom and radio, no need to pay, we're here to help! What is ur bootloader anyway ? is it unlock, stock rom ???
is that it because its not working is there any other method of hard reset?
i tried the buttons its not getting to the boot loader like at all , its unlocked using the titan unlocker and its just not booting up to any thing just that screen and the rom was 2.17 orignally then i flashed it to dcd's newest rom 2.2.1... then i steped it down to dcd 2.20 then i tried to flash the sprint 3.16 recent rom update and it got stuck at boot loader which was the oli bootloader which i think its called and i had to use exit_hbl and now its stuck. it will reboot but i still get that screen i mentioned before
i got to boot loader its says
TITA100
SPL-1.20.olipro
no wonder, you didn't follow instruction carefully, when you press power + camera and press reset , it should take you to tricolor, at that you can reload your sprint stock rom. Your phone is not brick yet
i just PMed you with my paypal info. Ill make sure your phone makes it out ok
thanks but if anyone its astrqnusx hed get money first i flashed the rom again it worked and then i tried to flash the radio and it just restarts and doesnt load at all??? its stuck at the mobilty screen???
what radio and rom did you use? I assume that you have Titan(Mogul) not touch
and after the radio i tried to reload the rom and it acted as tho it would work and is now stuck at the mobilty and i used now dcds 1.6.8 rom and the 3.27 radio... and now its really stuck maybe i should try the stock rom for sprint?
you are too rush on thing, you can't use rom 1.6.8 with the new radio, reflash back with stock rom from your vendor to get working condition. There is specific instruction if you want to load the radio
After you get back to your vendor (sprint/verizon) follow this instruction to flash new rom, don't miss a step http://forum.ppcgeeks.com/showthread.php?t=17667. Again, I see you have the touch, touch and mogul are two different device you can't use DCD or any rom here. You have Titan Phone right?
-my touch is fine thats a custom flashed rom from swiftblade and it works amazing with a radio update ive done alot of different things even reg edits
but the titan is just new to me
Is your phone working yet?
yea i got it thanks!
I'm having the same issue, but I cannot get back to the tri color screen. Any advice? I thought I followed directions pretty well, but apparently not.
j3oomerang said:
i just PMed you with my paypal info. Ill make sure your phone makes it out ok
Click to expand...
Click to collapse
You must be a sad little man.
nismofun said:
I'm having the same issue, but I cannot get back to the tri color screen. Any advice? I thought I followed directions pretty well, but apparently not.
Click to expand...
Click to collapse
I had the same problem flashing my mogal, it's not difficult to fix. take a deep breath, it will take a little bit of work but you can do it. flash back to rom 2.17 relock, then flash sprint official rom 3.35. Then run hard spl 2.40 then flash new rom, take battery out, hard reset should fix your problem. the relocker,unlocker and everything else can be found by searching xda and ppcgeeks.com
I had the same issue, resolved:
http://forum.xda-developers.com/showthread.php?t=384298
Cheers,
Tom
I'm sorry but i really need help...I've searched a few forums including yahoo and google and i do find olipro 1.20 but always for other phones like hermes and trinity but not the titan...I previously had one of the gps roms but it didnt include mms and so i went back to my original custom rom but now im stuck with the 2.40 bootloader...I have tried to no avail to find it because i didn't want to bug anyone for help but now im in a corner...can someone please help me..thanks in advance
http://forum.xda-developers.com/showthread.php?t=332381
What is your carrier? I run Verizon and MMS is great and I see there is a fix put out for Sprint MMS by no2chem.
http://forum.ppcgeeks.com/showthread.php?t=19122
lllboredlll said:
If you want to go back to the original ROM you need Titanrelocker not Olipro
Click to expand...
Click to collapse
He says he wants to go back to a custom ROM, so Olipro 1.2 is what he needs.
Geckotek said:
He says he wants to go back to a custom ROM, so Olipro 1.2 is what he needs.
Click to expand...
Click to collapse
Ya I've done made an edit. I suffer from ignorance from time to time.
Geckotek said:
He says he wants to go back to a custom ROM, so Olipro 1.2 is what he needs.
Click to expand...
Click to collapse
thanks guys i could'nt get it to work so im just stuck with the 2.40..the only problem is my phone going to sleep and me not being able to wake it with the power button. I just turned that setting off so it only dims which is fine and Geckotec did you look at my screename? lol...im a she ..hence the name im 1 bad az chick and i really appreciate you guys trying to help me because i normally search and search without asking for help but i did that and came up with with the unlocker from the first posting but couldnt get it to work and thought maybe i was trying the wrong thing...i'm no expert obviously so i'll just be content that everything else works perfectly minus that one little thing lol
im1badazchick said:
thanks guys i could'nt get it to work so im just stuck with the 2.40..the only problem is my phone going to sleep and me not being able to wake it with the power button. I just turned that setting off so it only dims which is fine and Geckotec did you look at my screename? lol...im a she ..hence the name im 1 bad az chick and i really appreciate you guys trying to help me because i normally search and search without asking for help but i did that and came up with with the unlocker from the first posting but couldnt get it to work and thought maybe i was trying the wrong thing...i'm no expert obviously so i'll just be content that everything else works perfectly minus that one little thing lol
Click to expand...
Click to collapse
What's funny is as I was typing "he" I thought to myself, this might be a she....but then I was too lazy to look back at your screen name.
Always nice to have a chick among the geeks. LOL
What happened when you tried to flash back to the original bootloader (relocker)?
Wait.. so if I have Olipro 2.4 and want to go back to 2.xx based roms I can run Olipro 1.2 to downgrade? OR: Do i first need to relock, then patch with 1.2, then reflash to 2.xx rom?
Geckotek said:
What's funny is as I was typing "he" I thought to myself, this might be a she....but then I was too lazy to look back at your screen name.
Always nice to have a chick among the geeks. LOL
What happened when you tried to flash back to the original bootloader (relocker)?
Click to expand...
Click to collapse
Geckotek said:
What's funny is as I was typing "he" I thought to myself, this might be a she....but then I was too lazy to look back at your screen name.
Always nice to have a chick among the geeks. LOL
What happened when you tried to flash back to the original bootloader (relocker)?
Click to expand...
Click to collapse
its ok Geckotek and yes i'm a chick lol...thanks...i also love to tinker with things...even when i don't know what im doing but you live and you learn lol....well when i tried to flash back to th eoriginal(i'm not as advanced as you guys so humor me lol) it didn't work...i downloaded the unlocker ...double clicked it but nothing happened and then i did ALOT of reading and saw a posting saying to make a folder (C:\temptnt) and put the unlocker there but again nothing...am i missing something besides the basic knowledge and im not even blonde(no offense blondes of the world) ...after getting frustrated and tired i ran the relocker(did that first and again after i could'nt get the unlocker to work) flashed it back to sprint and then unlocked it again with 2.40 and put my regular custom rom that i has previously back on with the 2.40 being the only thing out of place lol...everything works though...with as i've said before...the exception being the power button ot working to put it into stanby or bring it out of standy so i set it not to go into standby...oh and before i unlocked it with the 2.40 the power button worked WOW! i rambled please forgive me lol
im1badazchick said:
...
after getting frustrated and tired i ran the relocker(did that first and again after i could'nt get the unlocker to work) flashed it back to sprint and then unlocked it again with 2.40 and put my regular custom rom that i has previously back on with the 2.40 being the only thing out of place lol...everything works though...with as i've said before...the exception being the power button ot working to put it into stanby or bring it out of standy so i set it not to go into standby...oh and before i unlocked it with the 2.40 the power button worked WOW! i rambled please forgive me lol
Click to expand...
Click to collapse
Try running the relocker and then running the old unlocker (the 1.xx, not the 2.40) available in the thread pointed to in Geckotech's first post in this thread; it should work without the need to reflash the ROM. If you get stuck in the bootloader, run the exit-bl.exe.
Yesterday I got frustrated as well. I ran the re-locker and called VZW and worked out every issue until my phone worked perfectly.
THEN I flashed to the 2.4 bootloader, flashed the unauth'ed Sprint 3.16 Sprint ROM (and since I have Verizon I made sure it did not let it boot up and run the customizations), then I loaded my cooked DCD 2.3.2 ROM.
All is well and working great now. YEAH!!
bakntyme said:
Try running the relocker and then running the old unlocker (the 1.xx, not the 2.40) available in the thread pointed to in Geckotech's first post in this thread; it should work without the need to reflash the ROM. If you get stuck in the bootloader, run the exit-bl.exe.
Click to expand...
Click to collapse
ok Bakntyme thanks for replying so if i run the relocker to lock it back to the factory spl(easy part)....and download the version that Geckotech linked to(still easy)...it puts a lock icon on my desktop....i double click that but get an error message....is there something that i'm supposed to do that i'm missing?...should i be using it with something else because the only thing that downloads is the lock icon(exe) and the rom that i had on originally isnt one of the gps roms(i have a tom tom already so i didnt need it but i thought that it was cool so i tried it but i wanted to go back to the other one after the first week)..can you dumb it up for me lol
im1badazchick said:
ok Bakntyme thanks for replying so if i run the relocker to lock it back to the factory spl(easy part)....and download the version that Geckotech linked to(still easy)...it puts a lock icon on my desktop....i double click that but get an error message....is there something that i'm supposed to do that i'm missing?...should i be using it with something else because the only thing that downloads is the lock icon(exe) and the rom that i had on originally isnt one of the gps roms(i have a tom tom already so i didnt need it but i thought that it was cool so i tried it but i wanted to go back to the other one after the first week)..can you dumb it up for me lol
Click to expand...
Click to collapse
The unlocker that Geckotek's post pointed to is in a zip file. You need to use an unzipper to extract the .exe file, then you can run it.
If you do not have an unzipper, look for pkZip, Winzip, IZArc, or 7-Zip. There are others, but these names came to mind.
edit: When you originally installed your first custom ROM, how did you unlock the phone? That unlocker, if it is still on your computer, should work again after you relock.
bakntyme said:
The unlocker that Geckotek's post pointed to is in a zip file. You need to use an unzipper to extract the .exe file, then you can run it.
If you do not have an unzipper, look for pkZip, Winzip, IZArc, or 7-Zip. There are others, but these names came to mind.
edit: When you originally installed your first custom ROM, how did you unlock the phone? That unlocker, if it is still on your computer, should work again after you relock.
Click to expand...
Click to collapse
thanks i understood all of that and i really appreciate you guys trying to help but i actually figured out what was going on...i updated my pc with the newest .net version 3.5 and as soon as it finished i double clicked the titan unlocker and it ran perfectly...guess my computer needed to be updated...i hadnt done that in awhile since i got the phone as a christmas gift and have been sooooo entranced with it that i neglected my pc lol... everything went smoothly and it's all working like it should now...power button included...hope you guys have a great week...well one more day and its the weekend
bakntyme said:
Try running the relocker and then running the old unlocker (the 1.xx, not the 2.40) available in the thread pointed to in Geckotech's first post in this thread; it should work without the need to reflash the ROM. If you get stuck in the bootloader, run the exit-bl.exe.
Click to expand...
Click to collapse
I tried it,it worked,thank you.
that link to the prior forum topic only lets me have 1.10 from the download. or is 1.2 buried a little further in? Thanks!
whoa, you got your power button to start working again? How did you do that exactly? Was it just the .Net 3.5 update? I find it so annoying that my power button doesn't work. I have to have S2U2 come up when i hit the power button just so the phone will wake up when i hit it again.
Hello,
i just want to ask if maybe one of the admins could contact the developers of HSPL, because there are many who bricked their devices because of SPL 3.03. Or maybe one of the developers themselves will read this. HSPL is the last way out in most cases (or finding somebody with a ORT JTAG Tool).
I know that you better should not update a device without collecting information before it. Indeed!
My last phone was a iPhone, so I know what I´m talking ´bout, but sometimes it just happens that you might have skipped any important information or hint.
So please help :/
You bricked your device? wow!
May be you are just stick on the boot screen where it says SPL 3.03, because you tryed to flash a ROM from the SD card that is not for your operator?
Well, if this is the case just flash an older official ROM for your operator, again from the SD card. Than you can use the actual HSPL and flash a custom ROM. That fixed it for me.
idimdim said:
You bricked your device? wow!
May be you are just stick on the boot screen where it says SPL 3.03, because you tryed to flash a ROM from the SD card that is not for your operator?
Well, if this is the case just flash an older official ROM for your operator, again from the SD card. Than you can use the actual HSPL and flash a custom ROM. That fixed it for me.
Click to expand...
Click to collapse
of course i already tried that, does not work.
You are not clear.
Can you get your device to boot loader?
If yes, then you can try Gold card method from there.
yes that still works, but i tried goldcard method today (1 time with the rom which bricked my device und with a custom rom and the original orange rom [my hd2 has a orange branding]) and it was not the solution for my problem :/
edit: oh and if it´s of interest: when trying to flash with goldcard method the rom which bricked it, i get the white screen with "Loading..." in the middle and then it says "Not allow" also on a white screen and "0028002" written in red, then gets back to bootscreen.
well since u can get to ur bootloader consider urself lucky it aint bricked..
Do one thing, get the newest stock rom from htc (same spl 3.03) and make sure its the right one for your device(when you enter your serial no. it should accept and give u a download link).
then try flashing that rom..
It should get you up and running.
After that you can start worrying about getting back to the old spl and/or hardspl
New HSPL
I am stuck with the same thing.
If i could only geat a new HSPL for spl 3.03.0000
[email protected] said:
I am stuck with the same thing.
If i could only geat a new HSPL for spl 3.03.0000
Click to expand...
Click to collapse
Try flashing an older stock Rom one that is covered by hspl via SD card method. Then whenever you like to install that latest 3. 14 Rom do it via usb method.
jjblaster3 said:
Do one thing, get the newest stock rom from htc (same spl 3.03) and make sure its the right one for your device(when you enter your serial no. it should accept and give u a download link).
then try flashing that rom..
Click to expand...
Click to collapse
that´s exactly where my problem is...
my HD2 has a orange branding and is from france. i downloaded a rom from a link somewhere in xda threads, but it´s a really old rom version. the idiots of orange support posted me a link to the touch hd rom^^, so i even don´t know if there is a rom out there.
dunno if it would help posting my serial here...
i tried to decrypt it for finding information about my model, but the only information i can get is the day of production by the first few numbers and letters :/
OlDirty89 said:
that´s exactly where my problem is...
my HD2 has a orange branding and is from france. i downloaded a rom from a link somewhere in xda threads, but it´s a really old rom version. the idiots of orange support posted me a link to the touch hd rom^^, so i even don´t know if there is a rom out there.
dunno if it would help posting my serial here...
i tried to decrypt it for finding information about my model, but the only information i can get is the day of production by the first few numbers and letters :/
Click to expand...
Click to collapse
You might want to look into the download.. if it's an MFG SPL you're stuck with it
Can you provide the link please?
So from what I understand, OlDirty89 failed to read the fine print and is now in possession of an un-usable phone.
I remember when XDA was actually a community where users like this could actually get help when faced with a situation like this...
EX> I was a noob once. My first PPC was a WM5 HTC Wizard/aka/T-Mobile MDA. I actually stumbled across this forum by accident looking for cool new apps for my phone since lets face it.. WM5 is very bland. I saw what I thought was the coolest thing I'd ever seen - a complete OS replacement loaded with new features I'd never seen on a phone before and sure enough, without reading, I downloaded and attempted to flash the ROM. Naturally, it failed and I panicked. I had paid just over $300 for the phone after all.. I came back to this site, opened a new thread titled "PLEASE HELP ME!!" and within an hour, the more seasoned users on this site helped me restore my phone to the factory state and guided me in the right direction, teaching me everything I could have ever wanted to know about WM and how to customize it. I did eventually get that cool custom ROM on my Wizard and became an established member of the community.
^^^^ This is why I absolutely CANNOT STAND flamers... Flaming a user for being less knowledgeable than you is just plain pathetic... Shows what you're like on the other end of the keyboard too... You know it was really funny because I stumbled across a statistic once that stated that 60% of users who join these forums and flame other users are overweight virgins living with their parents... Just thought that was a funny statistic worth mentioning...
Now with all of that being said.. Let's help this guy. He clearly needs it else he wouldn't have posted this thread asking for it. I'm not saying that someone should write a step-by-step tutorial right here in this thread telling him exactly how to undo what he's done, just guide him in the right direction...
This speech really reminds me of a movie I saw not too long ago...
"Pay it forward..."
Just my 2 cents...
dharvey4651 said:
So from what I understand, OlDirty89 failed to read the fine print and is now in possession of an un-usable phone.
I remember when XDA was actually a community where users like this could actually get help when faced with a situation like this...
EX> I was a noob once. My first PPC was a WM5 HTC Wizard/aka/T-Mobile MDA. I actually stumbled across this forum by accident looking for cool new apps for my phone since lets face it.. WM5 is very bland. I saw what I thought was the coolest thing I'd ever seen - a complete OS replacement loaded with new features I'd never seen on a phone before and sure enough, without reading, I downloaded and attempted to flash the ROM. Naturally, it failed and I panicked. I had paid just over $300 for the phone after all.. I came back to this site, opened a new thread titled "PLEASE HELP ME!!" and within an hour, the more seasoned users on this site helped me restore my phone to the factory state and guided me in the right direction, teaching me everything I could have ever wanted to know about WM and how to customize it. I did eventually get that cool custom ROM on my Wizard and became an established member of the community.
^^^^ This is why I absolutely CANNOT STAND flamers... Flaming a user for being less knowledgeable than you is just plain pathetic... Shows what you're like on the other end of the keyboard too... You know it was really funny because I stumbled across a statistic once that stated that 60% of users who join these forums and flame other users are overweight virgins living with their parents... Just thought that was a funny statistic worth mentioning...
Now with all of that being said.. Let's help this guy. He clearly needs it else he wouldn't have posted this thread asking for it. I'm not saying that someone should write a step-by-step tutorial right here in this thread telling him exactly how to undo what he's done, just guide him in the right direction...
This speech really reminds me of a movie I saw not too long ago...
"Pay it forward..."
Just my 2 cents...
Click to expand...
Click to collapse
Great post
But I hate to say, unless we can get some powerful brainstorming goin on and figure out how to drop an engineering SPL (MFG) with mtty I don't think we can help..
I started a thread a little while back -- Stuck with SPL 2.02.0000 - Test ROM? that you might wanna read through to understand your situation a little better.
And just fyi, you can play/flash between 2.02 and 2.03 without problems, just DON'T try flashing 2.01 from those two.. left me with a lovely little brick.
(this is only if you flashed the 2.03 from this thread)
OlDirty89 said:
that´s exactly where my problem is...
my HD2 has a orange branding and is from france. i downloaded a rom from a link somewhere in xda threads, but it´s a really old rom version. the idiots of orange support posted me a link to the touch hd rom^^, so i even don´t know if there is a rom out there.
dunno if it would help posting my serial here...
i tried to decrypt it for finding information about my model, but the only information i can get is the day of production by the first few numbers and letters :/
Click to expand...
Click to collapse
Use SSPL and it will install your Custom or Stock ROM without any problem.
Download from here http://forum.xda-developers.com/attachment.php?attachmentid=260802&d=1261873816
OlDirty89 said:
of course i already tried that, does not work.
Click to expand...
Click to collapse
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Scabes24 said:
You might want to look into the download.. if it's an MFG SPL you're stuck with it
Can you provide the link please?
Click to expand...
Click to collapse
http://www.megaupload.com/?d=BC4FGYH4
it´s 1.43
dharvey4651 said:
So from what I understand, OlDirty89 failed to read the fine print and is now in possession of an un-usable phone.
I remember when XDA was actually a community where users like this could actually get help when faced with a situation like this...
EX> I was a noob once. My first PPC was a WM5 HTC Wizard/aka/T-Mobile MDA. I actually stumbled across this forum by accident looking for cool new apps for my phone since lets face it.. WM5 is very bland. I saw what I thought was the coolest thing I'd ever seen - a complete OS replacement loaded with new features I'd never seen on a phone before and sure enough, without reading, I downloaded and attempted to flash the ROM. Naturally, it failed and I panicked. I had paid just over $300 for the phone after all.. I came back to this site, opened a new thread titled "PLEASE HELP ME!!" and within an hour, the more seasoned users on this site helped me restore my phone to the factory state and guided me in the right direction, teaching me everything I could have ever wanted to know about WM and how to customize it. I did eventually get that cool custom ROM on my Wizard and became an established member of the community.
^^^^ This is why I absolutely CANNOT STAND flamers... Flaming a user for being less knowledgeable than you is just plain pathetic... Shows what you're like on the other end of the keyboard too... You know it was really funny because I stumbled across a statistic once that stated that 60% of users who join these forums and flame other users are overweight virgins living with their parents... Just thought that was a funny statistic worth mentioning...
Now with all of that being said.. Let's help this guy. He clearly needs it else he wouldn't have posted this thread asking for it. I'm not saying that someone should write a step-by-step tutorial right here in this thread telling him exactly how to undo what he's done, just guide him in the right direction...
This speech really reminds me of a movie I saw not too long ago...
"Pay it forward..."
Just my 2 cents...
Click to expand...
Click to collapse
thanks for that. we could not be a specialist in everything
netvpn7 said:
Use SSPL and it will install your Custom or Stock ROM without any problem.
Download from here http://forum.xda-developers.com/attachment.php?attachmentid=260802&d=1261873816
Click to expand...
Click to collapse
SSPL does not work on my device at the moment.
idimdim said:
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Click to expand...
Click to collapse
i´m trying that right now (download is active)
idimdim said:
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Click to expand...
Click to collapse
Downloading ...
looks like I am also stuck on bootloader with SPl 3.03,nothing I did helped so far,I had HSPL3,my stock Rom was 166.707.
any help is greatly appreciated.
OlDirty89 said:
Hello,
i just want to ask if maybe one of the admins could contact the developers of HSPL, because there are many who bricked their devices because of SPL 3.03. Or maybe one of the developers themselves will read this. HSPL is the last way out in most cases (or finding somebody with a ORT JTAG Tool).
I know that you better should not update a device without collecting information before it. Indeed!
My last phone was a iPhone, so I know what I´m talking ´bout, but sometimes it just happens that you might have skipped any important information or hint.
So please help :/
Click to expand...
Click to collapse
I experienced same things after return my phone for screen problem. Orange france gave me a new one and then my problem began. I made all the needed steps to flash a new radio and Artemis ROM and my phone became crazy. Radio failed at 99%, random soft reset etc... By chance there is a new version (1.72) on the website of orange. With HSPL2 i managed to downgrade the SPL to 1.66 version and flash with the last official orange ROM.
Frequently, my phone continue to soft reset itself and became crazy. Can't use it on a whole day, without soft reset 10 times. I decided to return it to Orange (SPL, ROM and Radio where the good ones). Received a new one, immediatly flash my phone with artemis V36 and radio 2.10.50_28 and all is ok with this last phone.
Probably problems come from the phone and not the way you try to revert back...
idimdim said:
IT WORKS! I am also with Orange France and had no issue in reverting back by flashing the latest Orange FR original rom from the SD card.
You can get it here:
http://www.megaupload.com/?d=B9HDHTMW
Then open with winrar or other archiver and extract the ruu_signed.nbh. Rename it to LEOIMG.nbh, and flash it from the SD card.
Click to expand...
Click to collapse
omg....great. it worked! i love u guys
i knew i will get help here
jovanoti
Hi, I've got the same problem with my Orange HD2.
I can not find any original older ROM to flash with HSPL.
No any chance to install any different rom than my "French language" ROM which is my exact problem I wanna WWE.
I had Magloader and WP7 in it. As time went by I upgraded to HD7 and never looked back. It's been a while since I have touched XDA and WM6.5.
My assumption is that even with Magloader, you only have to flash your stock ROM and it'll revert back to WM.
Mine won't go on and I suspect that I flashed a Non-Tmobile compatible ROM. Can someone confirm that this is the case? Here's the ROM string: RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.0 7U_2.04.50_22_2_Ship.exe
I understand completely that if I messed it up then it's messed up. I just wanna make sure there might be other solutions or something I am missing out.
-Thanks in advance!
----------------------------------
Is this a final answer? I need to know if it's bricked and nothing else can be done.
Anyone thinks a shop may be able to recover it back? It won't go on at all..
tictac0566 said:
Sometimes, it´s easier than you think.
You´ve got 2 options to get rid of HSPL. One of those options would be simply described in the original thread of HSPL.exe software. If you would have checked this program a little bit, you would have noticed the very fact that you can select what SPL or HSPL you want to install.
Second, you can flash your stock ROM via SD card method, this will replace HSLP and everything else - this does not work using RUU.exe via USB.
Click to expand...
Click to collapse
By the looks of the radio installed (2.04.50_22_2), I would say that you did brick your T-mobile phone. Take a look at the following thread for a possible solution to unbrick your phone:
http://forum.xda-developers.com/showthread.php?t=668347
Hi thanks for the response Lavell. Would MTTY be able to do anything?
The phone doesn't turn on at all, or it seems.
I've never bricked one before so Idk if this is the way it happens.
its gone. dead. it will need JTAGging or a new mainboard.
that thread wont help, the phone wont power on, and that thread requires you can get into bootloader.
that's a really early rom you used, the tmous didnt even exist when that rom shipped.
If you want to get rid of it let me know please!!!
Hey guys, don't mean to hijack the thread but I got the same problem here.
Had WP7 but could not use 2g so I went back to MAGLDR113 and installed the file below:
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
It went all the way to 100% but now the phone is dead. Computer makes a sound when I plug in usb but I have tried changing batteries and all but it doesn't work.
Does anyone know in Dallas or areas around how to do that JTAG thing?
There is no proper documentation on how to go back to stock 6.5 Windows or at least I could not find one
S2K_MoZo said:
There is no proper documentation on how to go back to stock 6.5 Windows or at least I could not find one
Click to expand...
Click to collapse
At its most basic, its the same for ALL hd2's, ,
1 get the correct stock rom for your region&vendor
2 flash it
thats it.
Sadly lots of times this is shortened to
1 get stock rom
2 flash it
and people just assume they can use any stock rom, and since they usually already have HSPL installed, it allows the flash to start, and tmous phones die.
Yeh think the HSPL installer should of had a TMOUS version either blocking known bricking radio & ROMs or just an on screen message warrning & advising on checking before comencing with flash.
At end of the day it is the users fault for not researching or using a TMOUS rom to be 100% safer !
http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo
Hello, and sorry for filling up the forums here in the Q&A. I really need some help, It is quite urgent. I am losing work, and all this stuff. I am running Amon Ra, and CleanROM 4.1
My phones keeps rebooting, randomly. Even if I remove the back cover, sim card, and SD card. I can't touch the dialer, If I do. BOOM, reboot. I will get 2 minutes to mess around, them reboot. Sometimes 2 seconds. This is very annoying. Should I flash a different Rom? GO back to complete stock? Flash this? Flash that? I need a professional answer here guys :/
Is this the first Rom you flashed? Did the problem present immediately? The more details the more we can narrow down your problem.
I have flashed countless amount of roms, this starting happening when I flashed this: http://forum.xda-developers.com/showthread.php?t=1556183 Ever since, everytime I power up my phone, I get like 30 seconds of usage then bam, reboot. I tried different roms and everything, It could be a problem, I've also tried Rez Rom, Or just ICS. I have tried a battery from my T bolt and got farther, but still got rebooted on. My SD card, both external and internal are wiped, everything, I mean everything I have wiped individually in amon ra recovery. Could it be my SIM Card? It says SIM CARD IS NOT AVAILABLE, After 10 seconds I get a weak signal, then when I go to dialer, it reboots.
Did the SIM card go bad? The rom could be the culprit, but how? I have flashed 3 different roms since. (Senseless clean rom 4.0, Clean Rom 4.1, Rez Rom 3.2) What could have changed? I haven't used my phone in 6 hours or so. Should I go into verizon to get a new SIM? Should I fear that they wont service me due to my unlocked rezound? I have tried everything. My next step is to flash an old rom, to see what happens.
T Greezy said:
I have flashed countless amount of roms, this starting happening when I flashed this: http://forum.xda-developers.com/showthread.php?t=1556183 Ever since, everytime I power up my phone, I get like 30 seconds of usage then bam, reboot. I tried different roms and everything, It could be a problem, I've also tried Rez Rom, Or just ICS. I have tried a battery from my T bolt and got farther, but still got rebooted on. My SD card, both external and internal are wiped, everything, I mean everything I have wiped individually in amon ra recovery. Could it be my SIM Card? It says SIM CARD IS NOT AVAILABLE, After 10 seconds I get a weak signal, then when I go to dialer, it reboots.
Did the SIM card go bad? The rom could be the culprit, but how? I have flashed 3 different roms since. (Senseless clean rom 4.0, Clean Rom 4.1, Rez Rom 3.2) What could have changed? I haven't used my phone in 6 hours or so. Should I go into verizon to get a new SIM? Should I fear that they wont service me due to my unlocked rezound? I have tried everything. My next step is to flash an old rom, to see what happens.
Click to expand...
Click to collapse
Holy hell, it's crazy in here tonight. There are three people with a similar issue running around right now.
You did install the new RUU right before installing this ROM? If not, your solution is right here.
If so, do it again.
If you've done it again already, give some more details as to when it started and what you did right before.
---------- Post added at 08:28 PM ---------- Previous post was at 08:25 PM ----------
a-jive said:
Holy hell, it's crazy in here tonight. There are three people with a similar issue running around right now.
Click to expand...
Click to collapse
Ha, never mind. You just have two threads on the same topic. Bad form, sir! No flaming from me, but that sort of thing gets some folks around here PISSED.
I am very sorry. How do I check the RUU Version? I don't remember flashing one before flashing that ROM. I don't really know, but does the PRL have something to do with this? I think I have accidentally messed with that by NOT being on that new RUU leak before I flashed the rom, so with that being said, the other new roms, I have to be on that new RUU ( 3.11.605.22 ) to have the rom stable, and not rebooting? Correct? Thank you for your guys help!
T Greezy said:
I am very sorry. How do I check the RUU Version? I don't remember flashing one before flashing that ROM. I don't really know, but does the PRL have something to do with this? I think I have accidentally messed with that by NOT being on that new RUU leak before I flashed the rom, so with that being said, the other new roms, I have to be on that new RUU ( 3.11.605.22 ) to have the rom stable, and not rebooting? Correct? Thank you for your guys help!
Click to expand...
Click to collapse
No prob here. Just warning you! Some of the old hands around here get tired of us noobs (I was a green horn not too long ago myself).
Boot into your bootloader, the newest HBOOT should be listed as 2.21.0000 and the date is Mar 11, 2012. If those are off, check out that link I posted. If you don't remember doing it (it's a PITA) you probably didn't do it.
No matter what though, if you can't get the phone to stop rebooting on you, you should RUU back to stock before trying anything.
When you unlock, make sure you flash the newest version of Amon Ra, because 3.14 has some issues with the new firmware.
Go slow and it'll be fine. For the record, in the instruction I sent he mentions that it may hang on the HTC screen for a couple minutes the first reboot.... it hung for almost 20 min when I did it. So don't get impatient!
Good luck.
Not trying to scold anyone here but next time read ALL the threads about it before trying to update to an RUU and 99% of these problems will just go away
werdna87 said:
Not trying to scold anyone here but next time read ALL the threads about it before trying to update to an RUU and 99% of these problems will just go away
Click to expand...
Click to collapse
No doubt, dude. Personally, I study my ass off before I do something that could kill my $500+ pocket computer. But I don't mind helping out those who skip the important parts.... some days anyway!
Running the new RUU is a nerve wracking ordeal, no doubt! You have to be patient and run everything twice. Patience is the name of the game!
OLDsJUNKIE said:
Running the new RUU is a nerve wracking ordeal, no doubt! You have to be patient and run everything twice. Patience is the name of the game!
Click to expand...
Click to collapse
bad logic to go by, some things brick if you run twice, AKA Froyo radio on the Inc
Hey guys! Just updated to the new version of Amon Ra. I am currently waiting for the new RUU to download. In the meantime, can someone give me a link or tut on how to update HBOOT? I'm currently on 2.11.0000 OCT 6, 2011 and cannot seem to find the new version. Thank you so much for putting up with me guys, means a lot! Sorry for the people I offended with my lack of knowledge! Forums are new to me, looks like I got some brushing up to do!
werdna87 said:
bad logic to go by, some things brick if you run twice, AKA Froyo radio on the Inc
Click to expand...
Click to collapse
Umm, if you check, the new leaked firmware usually needs to run twice. Once for the bootloader and once for basically everything else. If you are running things twice and getting bricks, you are doing something wrong.
---------- Post added at 12:14 AM ---------- Previous post was at 12:12 AM ----------
T Greezy said:
Hey guys! Just updated to the new version of Amon Ra. I am currently waiting for the new RUU to download. In the meantime, can someone give me a link or tut on how to update HBOOT? I'm currently on 2.11.0000 OCT 6, 2011 and cannot seem to find the new version. Thank you so much for putting up with me guys, means a lot! Sorry for the people I offended with my lack of knowledge! Forums are new to me, looks like I got some brushing up to do!
Click to expand...
Click to collapse
When you run the RUU, it will update your hboot to 2.21 in the process.
Ok, I'll keep you guys updated! I'll give it a go!
T Greezy said:
Hey guys! Just updated to the new version of Amon Ra. I am currently waiting for the new RUU to download. In the meantime, can someone give me a link or tut on how to update HBOOT? I'm currently on 2.11.0000 OCT 6, 2011 and cannot seem to find the new version. Thank you so much for putting up with me guys, means a lot! Sorry for the people I offended with my lack of knowledge! Forums are new to me, looks like I got some brushing up to do!
Click to expand...
Click to collapse
Just want to make sure you have the process down before.you start...
Once the RUU is downloaded, you will lock the boot loader, put the renamed ruu on your SD, run the RUU from the boot loader (don't try to flash it like a rom). You will then have to unlock and reflash that new among ra.
Then rock out. Just follow that step.by step closely for the RUU. Its kind of a weird process.
a-jive said:
Just want to make sure you have the process down before.you start...
Once the RUU is downloaded, you will lock the boot loader, put the renamed ruu on your SD, run the RUU from the boot loader (don't try to flash it like a rom). You will then have to unlock and reflash that new among ra.
Then rock out. Just follow that step.by step closely for the RUU. Its kind of a weird process.
Click to expand...
Click to collapse
Ok, so go back to HTC Dev.com and just re-lock? Or is there a tool I should use.
Besides that, I got a great feeling this is going to work!
Blah, it seems I have ran into a problem. The file for the new RUU I downloaded was corrupt. Anybody got a download link to the 3.11.605.22? Thanks.
I need a link to the new RUU. All the others are corrupt
T Greezy said:
I need a link to the new RUU. All the others are corrupt
Click to expand...
Click to collapse
Are you still stuck today?
Nope! Got my phone working as new! Updated and everything!
YOU GUYS ROCK, THANK YOU.
I had the exact same problem with my phone two days ago. You have to upgrade to the stock ICS first to update the RUU and junk, then re-flash Amon Ra, then install Cleanrom 4.0 or the dev version.