Can I downgrade rx6828 from WM6 to WM5?
How to do it?
noi_kog said:
Can I downgrade rx6828 from WM6 to WM5?
How to do it?
Click to expand...
Click to collapse
Install SdkCerts.cab (4,59 Kb), pda-hack.net_hp_rw6815_camera_patch_wwe.rar (594 Kb, english interface) from http://pda-hack.net/forum/index.php?showtopic=50, copy attached files into \windows directory on your device and replace hpRUU.exe from official wm5 to pda-hack.net_hpRUU_patched_from_language_and_model.rar (93,3 Kb) from http://pda-hack.net/forum/index.php?showtopic=53.
Could you please help me on this topic
"replace hpRUU.exe from official wm5 to pda-hack.net_hpRUU_patched_from_language_and_model.rar (93,3 Kb) from http://pda-hack.net/forum/index.php?showtopic=53."
What is hpRUU.exe? I followed the link and double click at this patch but it is not a file (it just showed text). So how can I achieve this process?
Thanks
I think my Bootloader is 1.0.5 so that i can't downgrade my device to WM5 by hpRUU.
How can't I downgrade my device to WM5 ???
Related
For all of you that want to upgrade a QTEK 2020 to WM2003SE, I've cooked a Rom from mamiach files and included intellipad and intellidialer, and QTEK's splash screen
This is intended for QTEK 2020 WWE machines.
Problems detected: BT problem after instaling pocketmoney 2005. If you have to use pocketmoney don't upgrade.
INSTRUCTIONS:
Unzip files to a folder
Run HimaUpgradeUt.exe
Follow screen instructions
I'm going to give it a try later on... Then i put here the veredict. :wink:
I've cooked a Rom from mamiach files and included intellipad and intellidialer, and QTEK's splash screen
Click to expand...
Click to collapse
hi,
what do you mean by "cooked" and which files did you take?
what version is your ROM?
2.02 or 2.06 or 2.20 or?
thanx
buzz
motowiz said:
For all of you that want to upgrade a QTEK 2020 to WM2003SE, I've cooked a Rom from mamiach files and included intellipad and intellidialer, and QTEK's splash screen
This is intended for QTEK 2020 WWE machines.
Problems detected: BT problem after instaling pocketmoney 2005. If you have to use pocketmoney don't upgrade.
INSTRUCTIONS:
Unzip files to a folder
Run HimaUpgradeUt.exe
Follow screen instructions
Click to expand...
Click to collapse
Hi,
do you see any problem for installation into an ITA device ?
hi,
what do you mean by "cooked" and which files did you take?
what version is your ROM?
2.02 or 2.06 or 2.20 or?
thanx
buzz
Click to expand...
Click to collapse
I haven't take any files is the same as the mamaich (you can find it in this http://forum.xda-developers.com/viewtopic.php?t=13588 post). Rom ver 2.06, but I inserted intelidialer and intelipad and also QTEK's splash screen.
Hi,
do you see any problem for installation into an ITA device ?
Click to expand...
Click to collapse
Don't know only tried in QTEK 2020...
Sorry
I there
And where is the link to download the files?
Best regards
Anonymous said:
I there
And where is the link to download the files?
Best regards
Click to expand...
Click to collapse
You must be logged in to download...
it keep given me error msg
error country code
what can i do
i have 1.
1.72
sorry
it says
device ID error
my rom is designed for i-mate and my ppc is qtek 2020
is this is the problem
hi. i need help to install this upgrada
i have qtek 2020
1.72.00 wwe
1.72.82 extrom
this upgrade is for i-mate
when i try install this upgrade it keep gives me error 100 country error
or
error 120 device id error
Hi,
I have flash my hermes to wm6.0 using the hard spl menthod.
But now i try to use the dopod 838 pro original wm5.0 rom to downgrade but it won't allow.
so how do i downgrade my 838 pro from wm6.0 with hard spl to wm5 ?
for your info i flash the 838 pro according to Mr. MrVanx's LVSW Upgrade Guide.
thanks for the help.
regards.
Extract the NBH and use CustomRUU to flash it.
If you want a brick-safe downgrade, take only OS, ExtROM & Splashes from your dopod838 rom and create a NBH only with this, then flash it with CustomRUU.
FYI
Just as an FYI this didn't work for me as I had upgraded my bootloader too.
If you are in the same boat do a search for 1.10 OLI boot loader, install that (very quick), then grab your original ROM (from the wiki page)
Good luck,
where to download wm5 custom ruu Os only?
Zaps said:
where to download wm5 custom ruu Os only?
Click to expand...
Click to collapse
read here WM5 Downgrade guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=22&Itemid=27
abenk said:
read here WM5 Downgrade guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=22&Itemid=27
Click to expand...
Click to collapse
link to RUUWrapper.exe (CustomRUU by olipro) not working, any other link to download?
This touches on a question that I have seen bounced around a good bit but never fully answered. If we upgrade our device to HardSPL and then to WM6, is it possible to take our device back to stock conditions including the stock SPL as well as the Stock WM5? Ie, is it possible to get the device back to a state where we can simply download the .exe file from HTC's website and run it in order to re-flash the phone?
Zaps said:
link to RUUWrapper.exe (CustomRUU by olipro) not working, any other link to download?
Click to expand...
Click to collapse
read here
http://forum.xda-developers.com/showthread.php?t=298737
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
skunknet said:
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
Click to expand...
Click to collapse
JumpSPL only works once, you have to run it prior to every Rom uopgrade you want to do.
The "New WM6 Upgrade Guide" is based on an other method, namely HardSPL instead of JumpSPL. The advantage is that HardSPL stays resident (until you flash another SPL) so you don't have to bother again with the SPL issue every time you want to flash.
So, if you are aquainted en comfortable with the way you did your first upgrade: Run JumpSPL first and the RUU afterwards, do it again with your new upgrade attempt. The result is the same, it's only one step more to execute.
Try~~
skunknet;1806937 said:
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
Click to expand...
Click to collapse
HERE:
http://forum.xda -developers.com /showthread.php?t=353547
enjoy ~~~
Thanx for answer ...
Rondol1 but i have G4 device ... are you sure that i can upgrade to WM6 ? ... I have IPL 2.20.0001 and SPL 2.13.0001. Do i have to upgrade IPL to the last version, run Jumpspl on device and launch RUU utility with my favorite ROM ??
Thanx again in advance ...
skunknet said:
Thanx for answer ...
Rondol1 but i have G4 device ... are you sure that i can upgrade to WM6 ? ... I have IPL 2.20.0001 and SPL 2.13.0001. Do i have to upgrade IPL to the last version, run Jumpspl on device and launch RUU utility with my favorite ROM ??
Thanx again in advance ...
Click to expand...
Click to collapse
I have a G4 myself and I have flashed allmost every single ROM that has come out here. Old and New style alike.
You IPL is fine, don't change it. Just run JumpSPL (your Prophet has a white screen) connect it to your PC and launch the RUU. If you want to try more ROM's after each other, you could install HardSPL to save time the next try.
Sorry...
rondol1 said:
I have a G4 myself and I have flashed allmost every single ROM that has come out here. Old and New style alike.
You IPL is fine, don't change it. Just run JumpSPL (your Prophet has a white screen) connect it to your PC and launch the RUU. If you want to try more ROM's after each other, you could install HardSPL to save time the next try.
Click to expand...
Click to collapse
Sorry for the broken link in the previous post
Please have a look here:-...
http://forum.xda-developers.com/showthread.php?t=353547
hope it helps~~ ^_^
Many thanx guys ...
i've upgrade successfully my G4 device to WM6 ....
I've upgrade to Prophet Touch VIII using jumpspl ....
Many thanx at all for information ....
i have xda o2 mini s and it was Dutch lang. so i flashed to engish rom tnt 6
from the explain for mr its right , so now i want to flash arabic version
from i mate clup k-jam and thats the link ...
ftp://ftp.clubimate.com/K-JAM_Arabic_2160901_21609102_20710_ship.zip
BUT i mean i flash it with the way for G4 with that tool > START-sSPL.exe
and the other files < and i just add the nk.nbf to the other files than i have
arabic rom , so its work or not coz iam not sure , thx for the answer .
NO, don't do that!
With either SoftSPL or HardSPL, you can only flash ROMs that doesn't have IPL and SPL. The original factory ROM must have IPL and SPL inside. You must extract and reassembly nk.nbf with only OS.nb, otherwise your device will brick if you continue flashing.
1st thanks so much starkwong ...
2nd with which programe i can extract and reassembly nk.nbf with only OS.nb thx again your brother magdi .
Well,it depends which method you adopted first to flash wm6 TNT rom on your phone.If you applied HardSPL,then first you'll have to remove HardSPL,flash back to official Bootloaders (IPL/SPL), only after that you can revert back to the official k-jam rom.Coz HardSPL flashes patched Bootloaders(IPL/SPL),But if you did it with SoftSPL,there's no need to do anything as it reverses itself after the flash and reboot of the phone,the original Bootloaders(IPL/SPL) are back in originality.So just download the official rom and flash.
What IPL/SPL are displayed at the present in your phone ?
1st thx mr/mrs zabardast_1
2nd i still have the orginal IPL/SPL with g4 and iam sure from it coz i didnt change them coz i was use SoftSPL..
but basicly i have room from k jam club orginal arabic ( conating extened room , ipl , spl , radio ect .. ) so i wanted to make extract and reassembly nk.nbf with only OS.nb for the OS only with nk.nbf to use it with SoftSPL patch with that file > START-sSPL.exe < and the orginal is wm5 not 6 or tnt ...thx again your brother magdi
Hello
I would like to try some custom ROMs, but since my Touch Pro already had some problems with the stylus sensor, I don't want to lose the warranty. I dumped the ROM and splash screen, but I have some older SPL version -1.69.0000. Is there a way to extract SPL? I can't find it anywhere
Thanks in advance.
m2c said:
Hello
I would like to try some custom ROMs, but since my Touch Pro already had some problems with the stylus sensor, I don't want to lose the warranty. I dumped the ROM and splash screen, but I have some older SPL version -1.69.0000. Is there a way to extract SPL? I can't find it anywhere
Thanks in advance.
Click to expand...
Click to collapse
You will have to get the shipped ROM by your carrier and dump the SPL from there. You can't dump your SPL from the Image on your device.
Thanks
Dave
If you will find some solution, please post it here
I have the same problem. Thanks
It would be helpfull if you mentioned your carrier and whether its a TP or fuze. Its easy to get the spl if you know which rom came on the device.
its mda vario iv (branded htc by t-mobile).
i've found something:
Code:
SPL dump for raphael:
pmemdump 0x88000000 0x80000 spl.bin
Will be this useful? Or is there any other way?
dewil9 said:
its mda vario iv (branded htc by t-mobile).
i've found something:
Code:
SPL dump for raphael:
pmemdump 0x88000000 0x80000 spl.bin
Will be this useful? Or is there any other way?
Click to expand...
Click to collapse
jcespi2005 said:
The reconstruction process can be done only for the OS part...
You can't extract the radio or SPL from the device, you need a shipped ROM to get this two parts.
Cheers.
Click to expand...
Click to collapse
You can only get spl if there is a shipped version of that rom.
Open about in settings and tell me what it says. Then hold down volume and reset. It will bring up the tricolor screen. Post what both of them say.
aruppenthal said:
There should be a way if there is a shipped version of that rom.
Open about in settings and tell me what it says. Then hold down volume and reset. It will bring up the tricolor screen. Post what both of them say. I need to be sure to get the right one.
Click to expand...
Click to collapse
EDIT:
@dewil9
Actually, what SPL are you after?
Ta
Dave
Open about in settings and tell me what it says. Then hold down volume and reset. It will bring up the tricolor screen. Post what both of them say.
Click to expand...
Click to collapse
about:
CE OS 5.2.19965 (Build 19965.1.2.3)
tricolor screen:
RAPH300
SPL-1.69.0000
MicroP-Herm (LED) v 13
MicroP-Herm (KEY) v5
PSOC-Herm STAGE_CVT v0x35
dewil9 said:
about:
CE OS 5.2.19965 (Build 19965.1.2.3)
tricolor screen:
RAPH300
SPL-1.69.0000
MicroP-Herm (LED) v 13
MicroP-Herm (KEY) v5
PSOC-Herm STAGE_CVT v0x35
Click to expand...
Click to collapse
There is a German T-Mobile ROM on the Wiki with 1.69 as the version. Download it and use NBHExtract to Dump the SPL from it.
Ta
Dave
I am from Slovakia, and language of whole OS is english.
Is it ok?
dewil9 said:
I am from Slovakia, and language of whole OS is english.
Is it ok?
Click to expand...
Click to collapse
No, it doesn't matter Raphael SPL 1.69 is the same from any country.
Ta
Dave
Thank you very much
DaveShaw said:
There is a German T-Mobile ROM on the Wiki with 1.69 as the version. Download it and use NBHExtract to Dump the SPL from it.
Ta
Dave
Click to expand...
Click to collapse
It appears the one in the wiki is a reconstruction and does not contain spl
You should be able to use HaRET to dump SPL from RAM at runtime. SPL is at physical address 0.
With RAM protection implemented in Diamond/Raphael/Kovsky/Blackstone it is quite unlikely that SPL in RAM will be different from SPL in NAND, however still possible. Since there's no SPL 1.69 in circulation, you can't verify how accurate the RAM dump is. Someone could dump a known SPL version this way and then confirm the files are identical when extracted from .nbh and dumped from RAM.
One more question... probably stupid one...
I downloaded this german rom, but I don't know howto extract spl from it.
I know with nbhextract, but how exactly?
Can somebody help me? Thank you
dewil9 said:
One more question... probably stupid one...
I downloaded this german rom, but I don't know howto extract spl from it.
I know with nbhextract, but how exactly?
Can somebody help me? Thank you
Click to expand...
Click to collapse
Is the one you extracted an official rom or the rebuild from the wiki?
The one in the wiki does not have the spl in it.
Ah I thought tha roms on wiki are shipped one...
So still no 1.69 spl??
Stock SPL 1.69.0000
For all guys looking for stock SPL 1.69.0000, here is one i have already extracted from czech T-Mobile ROM. So we have done one thing Another things to do is to make one single NBH file with stock SPL and one NBH file with OS, Splashes and stock Radio without SPL. That is what i have not understand yet very well, but i got kitchen and i want to flash new ROM early
Thanks for the SPL - same as on my UK T-Mobile Vario IV.
Now i can restore to factory settings - time to play!
Stock SPL not changing version numbers
I've tried searching the whole net already but I couldn't find it.
Something screwed in my screen and I want to turn it in for warrenty.
Now I restored my ROM/Radio already but when I try to restore Stock SPL (doing it when in USB mode) and it goes to 100% in a few secs it still says 1.90 Olinex.
Anyone got a solution for that?
Kind regards,
Kenny