O2 ATOM can't going to system,and any keyboard not working,Power + Camera + Reset same not working,please help,thanks!
i think bootload problem,but how to repair this,thanks!
Can you explain more? What did you do ..?? etc..
Related
hi
i updated my atom rom version to 3.3.3 three days ago.It installed completed i used this rom 3-4 hours then i was freeze and i try to reset it. it didnt respond so i decided to hard reset to my atom.I tried to hard reset now it says "device clean boot....." it stuck this screen then i try to reset the device then it stuck o2 screen it didnt pass to align screen. i cant use my atom for three days
Please help me......
remove the battery for a while.. then try hard reset / reflash
i try this method but it is same it doesnt work
did u try the instructions posted in aku 3.3.3.??..
"
For those of you who have downloaded and flashed using SD Card method who ended up in a brick! ITEX recovers his Atom by following procedure:
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button
4. replace battery while still holding the buttons
This will bring you back to bootloader mode. Just flash the above DSUU.
"
Does it have a chance to use wm6?
joolawan said:
Does it have a chance to use wm6?
Click to expand...
Click to collapse
it can barely use WM5 and anyway these chinese splash their advertising for WM6 all over the place in hope ppl will buy their rom, until I see it running in my device or get confirmation from someone reliable (such as Jiggs) I dont believe a word of it and besides the 3.3.3 rom is very fast and ten times better than any actual official release
yes i tried to that method too. it is same it still stuck on o2 screen. it doesnt pass to align screen..please help me
my problem didnt solve pls help me i cant use my atom..........
plsssssssss help meeee...........
plsssssssss help meeee...........
R U able to go to bootloader mode ?...
ironeagle said:
R U able to go to bootloader mode ?...
Click to expand...
Click to collapse
try to be on the bootloader and reflashed the ROM. try to search same cases in the forum. I think they solved the problem alike.
yes same to problem. i dont re enter bootloader again :S
did DSUU Recognize your ATOM ?..
Connect your ATOM to PC (using USB)
Run DSUU
Try to flash it..
i can enter bootloader mode and i can update rom but after this proccess it says "device clean boot......" and it freeze . it doesnt pass to align screen
plssss help meeeeeeee.
Which ROM you flashed?..
i flashed orginal atom rom i downloaded from seeo2.com
pls helpppp meeeee my atom is dead
are u using o2 atom exec or just atom?
cuyz i've got o2 atom exec..maybe i could flash it with o2 atom (yeah i cant flash anything with dsuu)
mine is o2 atom
did u amend any thing from the original ROM from seeo2? I mean you flash your atom with the original ROM...0426? without replacing the extended ROM...etc?
Hi All
I tried to Downgrad my WM6 Touchy to Orginal WM5 rom, Then I cheng my Eboot from Bootloader with SD card & Now I cant get my divice in bootloader mod & when I try to Upgrad it in normal way my divice get restart, How can I fix this problem? pleas help me.
Why on earth would you do that!
Remove battery and press SR and Camera together, dont release!
Now insert the battery and then release SR and Camera.
if that doesnt work you need JTag method in Wiki and if that doesnt work send it to repair and if that doesnt work buy a new one.
My divice can turn on & normaly get in to the last wm I upgrated in to, but it cant get in bootloader mod & when I whant to upgrade it in loaded wm it sudenly get restart
Check the Wiki, need reinstall your bootloader
Hi there,
I have problem with my o2 atom exec, ive recently changed my battery into the new one, and do nothing except changing the battery. After changing the battery my atom exec start to blinking, just the same as this user post in youtube
Youtube Video
Ive tried every possible way to enter bootload mode, but nothing works. Ive followed the instruction on the wiki in how to enter bootloader mode when you have semi brick atom, but that just not work.
Not give up yet, ive tried the forcing bootloader mode in wizard as they mention it here. But again nothing happened.
Anybody has any idea how to solve this issue, because the wiki said that i have to enter the bootloader mode first before i restore the rom into the original one. Any help will be very appreciated. Thanks all.
anybody here ?
U have to be very carefull while pressing and releasing the buttons otherwise it will not work.
OR
Hard reset ur Atom Exec.
Try it.
HELLO
i am a new member and sorry for my bad english
my problem that i ve upgrade my hermes and unloked sid ,but i killed my Hermes by trying to fix a "NoGSM error"
now my hermes don t start i can 'thave the boot screen ,only if take the power botton +to access boot screen i traid all solutions but no success
i ve not access to ktl mode;for this resons i supluy your help,i have connet herms and launch device monitoring and officiel rom ,result is attached down,
herm200
IPL 1.04
SPL 2.03
THINKS
Hello STAMBITA, try with mtty for fix problem.
If your OS don't start you try JTAG mode because your Hermes is not super cid (SPL 2.03) for fix problem.
See the post http://forum.xda-developers.com/showthread.php?t=391047&page=17.
Regards
nico
STAMBITA do you have access to a rom provided by your telco? If so try to flash that rom while you're in the bootloader. Since your device isn't supercid it's either that, or JTAG or send it to a repair centre. I'm sorry.
I ve not access to room .with mtty nothing happen nothing .the last solution is to try jtag but is complicate to do.to send for repair centre it cost the price of new one?
my dopod 818 pro(htc prophet g4) can't power on.
i need help to find the way to repair it.
i've looking in many pda forum, they talk about rewrite/reprogram the bootloader(i can't enter into bootloader mode).
they use something about jtag programmer, could anybody tell me how to use that thing(i'm newbi).
or is there anyway else to fix my problem???
I have the same problem with my Qtek S200 G4
this Jtag Pinout for HTC prohpet G4 ~ http://img.majidonline.com/show/183593/wizardjtagpinsis8.jpg
ROM Upgradation Failed
Dear All,
I was trying to upgrade my dopod 818 pro ROM version, but unfortunatly my connect breaked in the mid of process, due to that lost everything, even my previos OS too. and now i am unable to restart my mobile.whenever i am trying to on it, its showing only DOPOD on the disply may u plzz help me to recover my old settings?? i had already done the hard resett, but Result is NILL...
aadi1 said:
Dear All,
I was trying to upgrade my dopod 818 pro ROM version, but unfortunatly my connect breaked in the mid of process, due to that lost everything, even my previos OS too. and now i am unable to restart my mobile.whenever i am trying to on it, its showing only DOPOD on the disply may u plzz help me to recover my old settings?? i had already done the hard resett, but Result is NILL...
Click to expand...
Click to collapse
try reflash with the official rom