Related
I would like to add the fonix voicedial application to my XDA2. I noted on the "my-xda.com" website that this application is supposed to be on the companion CD that comes with a XDA2.
Not mine!, purchased just 2 weeks ago.
My CD version is V1.0 sept 2003
Can anybody tell me if there is a later release that has it on please.
Can't see anywhere on the O2 websites where to download it.
Any suggestions would be greatly appreciated.
Regards
Chris
You can dowmload AppsuiteXdaII.zip from here.
You can dowmload AppsuiteXdaII.zip from here
Click to expand...
Click to collapse
Thanks I updated rom and installed the applications, works a treat.
Just got to re-install tomtom.
Thanks again
Chris
Two questions :
- Is it free ?
- Does it work on Qtec and T-Mobile MDA too ? (the app_suite_.exe i mean )
Yes its free,
I would assume it would work providing you are running the updated Rom.
I had to update to 1.72.00 WWE, before I could install the appsuite.
Good luck
Chris
That's weird, I'm running on 1.72.00WWE and it does not let me install...
Any ideas?
Rayan, did you try installing to a bare configuration, ie before restore?
It is not the OS version that counts (although it probably would have to be 1.72.00WWE) , but the extrom version (1.72.181 / 1.72.187). but i don't know which registry entries are important for this validation.
Doing a restore after upgrade does overwrite the registry (like cruisin implied).
Can anyone post the individual cabs inside this application suite?
I can have a look to make it more "ExtROM version independent"
(ie that it will also work with my 1.72.902 ROM)
I tried to create the myself from the appsuite.
Fonix cab seems to be faulty. Any experience with this?
Couldn't it be possible to just install the Fonix Voicedial on just any rom available?
That shouldn't be a problem is it?
edsub said:
Can anyone post the individual cabs inside this application suite?
I can have a look to make it more "ExtROM version independent"
(ie that it will also work with my 1.72.902 ROM)
I tried to create the myself from the appsuite.
Fonix cab seems to be faulty. Any experience with this?
Click to expand...
Click to collapse
I am not able to install any of this software.... Please Edsub maybe you can do something...
I am more than happy to sort this out, BUT: I need to get hold of a correct Fonix cab file. The one in the posted app. suite is faulty and cannot be used.
ah, logging on helps.
Thanks superperry.
i will have a look at the cabs.
bollocks!
The Fonix cab you posted is faulty too.
The cab identifies as a ZIP cabinet, instead of a WinCE Cabinet.
Also WinCE Cab manager is not able to open it, just crashes. Same as with my copy of the Fonix cab.
The other two cabs are fine.
Just by looking at the TrueFax cab I bet the version checking is doen via a new setup.dll. This should be do-able. Plz have a little patience as I do have a real job to do too . . .
edsub said:
bollocks!
The Fonix cab you posted is faulty too.
The cab identifies as a ZIP cabinet, instead of a WinCE Cabinet.
Also WinCE Cab manager is not able to open it, just crashes. Same as with my copy of the Fonix cab.
The other two cabs are fine.
Just by looking at the TrueFax cab I bet the version checking is doen via a new setup.dll. This should be do-able. Plz have a little patience as I do have a real job to do too . . .
Click to expand...
Click to collapse
:twisted: I guess they gave us faulty file, huh! :!:
Don't worry edsub, we can wait. :wink:
This is the file downloaded directly from O2.
Thanks dcs, the file you posted is exactly the same as the one I extracted the cabs from . . .
Did ANYONE try to get the Fonix Voicedial to run on their Himalaya??
What happened?
Did the install on the Himalaya run?
Did the app itself run?
Any error messages?
This Fonix cab is something different from all the other cabs I know of.
BTW: dcs, did you get Fonix installed (you seem to have a new 1.72.187 rom version on O2)??
edsub said:
BTW: dcs, did you get Fonix installed (you seem to have a new 1.72.187 rom version on O2)??
Click to expand...
Click to collapse
Yes I did. It runs, but haven't done much with it yet.
mmm, I guess we have to conclude that O2 (or Fonix) have found themselves a new method of installing software on the Himalaya . . .
@dcs: Do you remember whether the install ran as silent as other (normal) installs on the Himalaya? Did you see the zip-manager get used for installing (I ask this because the Fonix cab shows up like a zip-type of cab, instead of like a WinCE cab)
New Voice Dialer++ (MS Voice Command 1.5 Is out)
1.5 is free to download for users of 1.0 & 1.1
go get it now :twisted:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
iggy said:
darren_the said:
Here is the link
so that no one will PM me to ask for it
http://www.microsoft.com/windowsmobile/downloads/voicecommand/updateversion.mspx
Click to expand...
Click to collapse
Weird, just installed the update without having MSVC installed and it works.
Click to expand...
Click to collapse
I've been trying all day and cant get the darn thing to download I keep getting
Service Unavailable
The server is temporarily unable to service your request. Please try again later.
Any chance of sending me the file ?
Just tried it and it again and it worked. I would be happy to send it if needed, do you have an email that can handle 5.5mb attachments?
Yes please please mail it to [email protected]
Many Many thanks
I tried this on my XDA II with the 2.06 2003SE ROM and found a problem - could someone else let me know if they have the same problem...
After installing I reset my device. After the reset, I found that I couldn't select any of my other input panels other than the default Block/Letter recognisers or the built in keyboard. IntelliPad (Phone Pad) and MessageEase were in the list but when I selected them it just switched to the default keyboard.
Can anyone help?
I've found the same problem with Intellidialler but finally managed to get Calligrapher working and never drew the connection with voice command. On top of that, there was an error the first time I tried the 1.5 upgrade setup and now if I try setting up 1.5 again it states that "No previous version of Microsoft Voice COmmand US PPC 1.50 was not found on this machine. The setup cannot continue" (yes you read the double negative right it's not a typo) I've tried uninstalling 1.0 and 1.5 and reinstalling to no avail. If anyone has an idea about either of these problems please share...
Hey pole_vaulter1,
I had exactly the same problem (No previous version etc).
It can be solved by copying the .cab file in c:\program files\microsoft voice command\ onto your xda\imate\mda and running the cab file from there.
Hope this helps.
Craig.
Craig,
Thanks a bunch - worked perfectly. I really should have thought of that myself but I suppose that's what a forum is for. Now if I could only get my Tengo and Intellipad to show up instead of the keyboard it would be perfect (until the next upgrade,tweak, software, etc.)
THANKS,
Travis
Craig,
in my case the installer does not create the \program files\microsoft voice command\ directory. Can I extract the cab file from the msi?
G'day Eddy,
I'm assuming you have 1.0 or 1.1 installed on your ppc.
Do you install files to another location? The file that went into the directory I mentioned is ... "Microsoft Voice Command.PPC420_StrongARM.CAB". You might be able to search your pc for that file?
As for extracting the cab from the msi - no idea sorry
Hope you find it.
Craig.
Craig,
no, I did not have version 1.0 nor 1.1. I got the impression that you installed without a previous version.
G'day Eddy,
No, I had the exact same problem as Travis a couple of posts up where I installed the upgrade, it gave me an error at the end of the setup on my ppc saying I already had voice command already installed (even though you had to have it installed for the upgrade to work) so I uninstalled it on my ppc - soft booted it to make sure it wasn't still resident, tried to re-install it and it gave another error saying that I didn't have the necessary software installed (version 1).
I'm not sure if you can buy version 1 of the software anywhere anymore but from other posts, apparantly handango will only let you buy it if you are a US or Canada resident.
Sorry for the bad news for you.
Craig.
Cab file MSVC 1.50
I found the cab file. Just copy it to you're device. :lol:
Dutchie,
could you mail this cab file to me or did you extract from the msi file?
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
No Wifi or Wordlogic after MSVC :-(
SH..... no WIFI or Wordlogic after I installed 1.5. I uninstalled it, and they work again. Anyone having the same problem with Voice command??? :?:
Does 1.0 the same??
I had quite a few problems after installing Voice Command 1.5. MS Reader would not run (out of memory error) and Calligrapher would not work either (still apeared in the bottom right) but only keyboard would load when Calligrapher chosen.
If I disabled Voice Command 1.5 (as opposed to removing it) everything was fin again.
From another forum I found that the problems I was experienceing was related to plugins in the Today screen (I had the Sprite monitor programming running). When this was removed, Calligrapher kicked back into life and Voice Command 1.5 worked fine.
MS Reader still gave the same out of memory error, but I found that if I added a shortcut in the Startup directory for MS Reader and made sure it loaded first then it would work fine after that.
Hope this helps
Mike
NinjaDonkey said:
@Dutchie - do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
NinjaDonkey said:
...do you have any problems with any of your SIP's?
The second I install it from the CAB file I'm unable to select either IntelliPad or MessageEase for my input methods.
If yours is working then I'm wondering what I've done wrong!
Click to expand...
Click to collapse
Interestingly, I have a similar problem, but I haven't touched MS Voice Command. I've had to make Intellipad my default input method, even though I use Fitaly more often. Once I change from Intellipad to anything else, I can't go back to Intellipad, or anything else, for that matter...
Hi,
I really want to install the Alltel ROM on my Sprint Mogul. I've searched around and didn't come up with anything, so can someone more knowledgeable on the subject tell me if this is a good idea, or if it's begging to have my phone bricked:
I downloaded the Alltel ROM and extracted its NBH contents using nbhextract. The CID is set to ALLTE001.
I also downloaded the newest Sprint ROM and extracted its NBH contents. That one's CID is set to SPCS_001.
Can I use nbhgen to change the CID of the Alltel ROM to Sprint's?
*edit: Nevermind. Gave this a shot and just got an error from RUU.
Um, yeah you will get an error. And, why are you trying this in the first place?
I use Cricket for my service. I've gotten everything except incoming MMS to work, and the problem is with how Sprint's Data Provisioning is nested in the Mogul's Sprint ROM. There are IOTA settings in the registry, but I really have no idea about how to modify them since Cricket doesn't require any data provisioning.
On my 6700, ArcSoft would automatically dial the connection I had specified in the settings when an MMS arrived. Now, it attempts to connect to Power Vision, and I get an IOTA error about how the device failed to connect to Power and I should contact Sprint. I know that the Alltel ROM would not have these problems.
Another idea that I had was to completely replace my current registry with Alltel's (I have a complete dump), but I'm not too sure how to go about doing that, either. When I restore the file with PHM, the Sprint and Alltel settings just coexist with eachother.
If you have any ideas or suggestions here, they'd be appreciated.
my understanding of crickets data services was that they use simple ip and a proxy for http. have you changed the mogul to use simple ip? i think all you really need is a way of stopping an IOTA aka "vision profile update"
Exactly, but I'm not sure how to go about stopping that. My latest venture is to get someone with an Alltel PPC6800 to take a full SPB backup of the registry, so that their settings will overwrite all of Sprint's.
Do you know of a way to disable IOTA?
to0 said:
Exactly, but I'm not sure how to go about stopping that. My latest venture is to get someone with an Alltel PPC6800 to take a full SPB backup of the registry, so that their settings will overwrite all of Sprint's.
Do you know of a way to disable IOTA?
Click to expand...
Click to collapse
delete the guardian file in Windows startup - then delete the IOTA folder - in program files.. this is what I did to make the mogul work on Alltel before they launched the 6800. I also went through the registry and deleted a couple of IOTA registry keys.. I can't remember where they were though.. Finally, I deleted the error 67 notification in the registry and everything worked perfectly..
Now that the Hard SPL for the device is out you can install the alltel rom directly from the exe after the hard spl is installed.
Yeah I got this going a few days ago. MMS is working perfectly now!
I ran Olipro's unlocker and popped the Alltel ROM WITH the ExtROM and everything works WITHOUT any special consideration. You could say that it "worked straight out the box".
Now the qyestions are 1) now that I've unpacked the RUU_signed.nbh, how do I repack it, and 2) where is the extended rom in the unpacked nbh? I guess these are the big questions for getting Mogul kitchens together and cooking ROMs.
Yeah the Alltel ROM is running pretty well. Definitely an improvement over the stock sprint ROM. Not a huge difference, but it's definitely worth the upgrade until we get some ROM Kitchens/Heavily Modified/Improved ROMs.
don't u guys miss java support?
I can't run opera mini anymore once I switched to Alltel...
Install Esmertec Cloudyfa Java it's better than the builtin on Sprint. Saving space if anything
so how do i get the alltel rom on my sprint mogel? if i am with sprint
eakrish said:
so how do i get the alltel rom on my sprint mogel? if i am with sprint
Click to expand...
Click to collapse
go to ppc geeks and check out the 6800 forum.
instructions are at the top.
Is there a memory difference at all between the 2? If so, what is best to go with? What is the advantage to the Alltel one over the Sprint?...Sorry...kinda a n00b...but not really...lol
hate not having mms - flashin alltel now thanks guys!
RESOLVED:
if you are unable to use phone codes (like I was) then you are probably an idiot, just like I am. Go back to DCD's original post and make sure to install a Carrier ROM (linked to very clearly in his first post).
Many thanks to Santehnik for providing a workaround and to GC14 for providing the actual solution.
###################################################################
I just flashed to the new 3.1.6 and am unable to access the phone codes (e.g. ##775#).
I tried entering it into the dialer (as well as ##DIAG#, ##DEBUG#, etc...) numerous times. Resetting my device and trying again. No love.
I also tried running \windows\EPST.lnk and \windows\EPST.exe. What appears to happen is that the program appears to load for 1/2 second and then disappear (presumably it is crashing, though I dont know for sure).
I re-downloaded the ROM on a different machine and reflashed my Titan, but it made no difference.
I also tried installing the Phone Codes .cab which adds phone codes to your Programs Menu, but those links do the exact same thing as the EPST.lnk (something flashes for 1/2 second and then is gone).
I have the Sprint Carrier Cab (3.39.10) installed and i'm on PRI Version 2.03_003 and I can make phone calls.
Has anyone else had this problem? Any suggestions?
Here are what the codes link to:
##778 = ..\Windows\EPST.exe ##778
#33284 = ..\Windows\FieldTrial.exe
#3424 = ..\Windows\DMRouter.exe /DIAG
#38278 = ..\Windows\Fuart.exe Fuart
~~~~~~~~~
Note to self, add that info to the Wiki plus a link to an archive of WM links to execute those functions.
bob, what dialer do you have installed?
First of all use ##778CALL (instead #)
And put files from zip into windows folder.
For me this works
p.s can you send Phone Codes.cab to santehnik.ua""gmail.com
I can't find it
For all of those I need 2 # key presses for them to work. I'm using DCD 3.16 w/ radio 3.39 if it makes a difference.
Also what the heck is fast uart mode? (##38278)
Here are what the codes link to:
* ##778 = ..\Windows\EPST.exe ##778
* #33284 = ..\Windows\FieldTrial.exe
* #3424 = ..\Windows\DMRouter.exe /DIAG
* #38278 = ..\Windows\Fuart.exe Fuart
Click to expand...
Click to collapse
Key two things:
1. FieldTrial, DMRouter, and Fuart are ##33284, ##3424, and ##38278 respectfully.
2. You should point out that for Sprint, there's an extra # at the end instead of pressing Send. (ex. ##778#)
gc14 said:
bob, what dialer do you have installed?
Click to expand...
Click to collapse
I have the default dialer installed. I am using the "stock" DCD 3.1.6 ROM. I havent installed ANYTHING since i reflashed. I dont even have my SD card popped in. It's as clean as you could ask for.
I tried using ##775[CALL] and it does exactly what clicking on EPST.lnk does - it flashes for 1/2 second and then disappears.
I have the Sprint Carrier Cab (3.39.10) installed and i'm on PRI Version 2.03_003 and I can make phone calls.
Click to expand...
Click to collapse
Ok are you sure you installed the sprint carrier cab? 3.39.10 is the radio NOT the carrier cab.
Also on Sprint you have to add a # to the end of the codes. ##775# with NO send. ##775 send is for other carriers.
I hate to break it to you, but those files that "resolved" your problem are IN the sprint carrier cab.
gc14 said:
Ok are you sure you installed the sprint carrier cab? 3.39.10 is the radio NOT the carrier cab.
Also on Sprint you have to add a # to the end of the codes. ##775# with NO send. ##775 send is for other carriers.
I hate to break it to you, but those files that "resolved" your problem are IN the sprint carrier cab.
Click to expand...
Click to collapse
You are correct that I incorrectly identified the radio cab as the carrier cab. However, I did an install of the Sprint Carrier Cab (that's how I got the radio). It was the one from the wiki that says it includes radio 3.39.10. You can find it here: http://forum.ppcgeeks.com/showthread.php?t=26119.
Also, I have to press ##775[CALL] in order to get to the PRL screen (as was suggested). Hitting ##775# does nothing. I followed all the instructions. It used to work for me on my previous build (DCD 3.0.4 and Radio 3.35) as ##775# but not since the upgrade.
Either way, copying those 2 files (which did not get installed by the sprint carrier cab) and using ##775[CALL] seems to work just fine.
You can "hate to break it to me" till you're blue in the face that it shouldnt be that way, but that doesnt change the fact that it is. I have no incentive to lie.
You are correct that I incorrectly identified the radio cab as the carrier cab. However, I did an install of the Sprint Carrier Cab (that's how I got the radio). I believe that it was 3.54 (though I dont remember for sure). It was the one from the wiki that says it includes radio 3.39.10.
Also, I have to press ##775[CALL] in order to get to the PRL screen (as was suggested). Hitting ##775# does nothing. I followed all the instructions. It used to work for me on my previous build (DCD 3.0.4 and Radio 3.35) as ##775# but not since the upgrade.
Either way, copying those 2 files (which did not get installed by the sprint carrier cab) and using ##775[CALL] seems to work just fine.
You can "hate to break it to me" till you're blue in the face that it shouldnt be that way, but that doesnt change the fact that it is. I have no incentive to lie.
Click to expand...
Click to collapse
Ok, first of all, I only say this stuff because if I had a dime for every person who doesn't read dcd's first post in his kitchen thread, I'd be a millionaire.
You did NOT install the Sprint Carrier Cab. You installed the Sprint Update Rom to get the radio. Again, that is not the Sprint Carrier Cab that is required for 3.1.6.
The reason you have to use ##775 send and not ##775# like all other Sprint customers, is because you did not install your carrier cab. Without the cab, it defaults to ##775 send.
It worked on 3.0.4 because a carrier cab was not required, instead you picked your carrier in the kitchen.
Lastly, copying those files might have "fixed" your ability to get to EPST or DMRouter, but not the correct way. Also, there are other very important files other than those that you are missing.
Click on dcd's 3.1.6 kitchen thread and read the ENTIRE first post.
Thank you GC. I have installed the Carrier Cab and updated the original post.
bobjase said:
I also tried installing the Phone Codes .cab which adds phone codes to your Programs Menu, but those links do the exact same thing as the EPST.lnk (something flashes for 1/2 second and then is gone).
Click to expand...
Click to collapse
bobjase, can you send me that .cab also. I've been looking all over for it. [email protected] - Thanks!
Can someone please upload Alltel PRI 1.28. The reason I need it is that it will get rid of my roaming triangle (have a sprint TP converted to Alltel). I found one over at ppcgeeks, but for some reason don't have permission to download it (even though I'm already registered there). And thanks in advance.
mickeyx323 said:
Can someone please upload Alltel PRI 1.28. The reason I need it is that it will get rid of my roaming triangle (have a sprint TP converted to Alltel). I found one over at ppcgeeks, but for some reason don't have permission to download it (even though I'm already registered there). And thanks in advance.
Click to expand...
Click to collapse
Here: http://forum.ppcgeeks.com/showthread.php?p=888469 Follow the instructions by ksg CLOSELY.
Yeah I saw that, but for some reason I can not download the file. It says that I don't "have permission to access this page." So, I was hoping that someont could upload the file here at xda. But. thank you for you help anyway.
mickeyx323 said:
Yeah I saw that, but for some reason I can not download the file. It says that I don't "have permission to access this page." So, I was hoping that someont could upload the file here at xda. But. thank you for you help anyway.
Click to expand...
Click to collapse
Here you go.. again, follow the instructions CLOSELY from: http://forum.ppcgeeks.com/showthread.php?p=888469
"Instructions to install:
1. Download PPST_080714_VictorC_Alltel_1.28_delta.sa.zip and unzip.
2. Connect your phone with ActiveSync and transfer PPST_080714_VictorC_Alltel_1.28_delta.sa.cab to your phone.
3. Run PPST_080714_VictorC_Alltel_1.28_delta.sa.cab from your phone
4. Using File Explorer (or total commander, or whatever you have...) go to \windows and launch PPST.exe
5. Answer yes at the prompts. Your phone will now reboot.
6. Go to start -> Settings -> Device Information and check to make sure your PRI version is now 1.28_011
7. Dial *228 and then select 1 to program your phone OTA. This should download the latest PRL for you and get your phone back out roaming, etc."
This will upgrade/migrate the PRI on any CDMA Touch Pro or Diamond to the Alltel PRI 1.28. DO NOT RUN THIS IF YOU DON'T WANT TO BE ON AN ALLTEL PRI. Good luck!
Hey thanks for all your help. I really appreciate it.