ok i was putting a wm6 rom on there and it has been sitting at 2 percent for 25 minutes what do i do? unplug it? let it go? did i brick it?
Related
I Waz Updating Back Up 2 Wizard Love Witch I Have Done B4 And This Tyme It Went 2 6 Percent On My Comp And Is Now Stopped There While In My Phone It Is On 5 Percent And Stopped There...what Do I Do? Is It Bricked?
Please write in a bit more readable english, I can't fully 'decode' your post right now.
Eelco
killacam13 said:
I Waz Updating Back Up 2 Wizard Love Witch I Have Done B4 And This Tyme It Went 2 6 Percent On My Comp And Is Now Stopped There While In My Phone It Is On 5 Percent And Stopped There...what Do I Do? Is It Bricked?
Click to expand...
Click to collapse
To get out of bootloader mode, press soft-reset button+power button. Then restart the upgrade on the PC
And Oops..great english !!
I have been trying to resurrect a dead Hermes. However I am afraid the battery maybe close to dead now. Is it possible to charge it even though all it boots up to is the bootloader? Your prompt reply would be most appreciated.
I dont see why not. As long as the charge light goes orange when you plug it in it should be charging it... when it goes green its 100% charged. USb charging seems to take longer than mains charging though.
Thanks. It goes into the BL even when I plug it into the wall charger, but the battery does get warm so I'm assuming it's charging. But now I have across another problem; the ROM update halts at 12%, and for some reason it jumps from 10% to 12% before freezing up. Tried to push just the SPL but that just got stuck at 0% and threw an error 286 at me, which is not documented. It did how ever upgrade the IPL from 1.01 to 1.04. The current SPL is 1.04.Olipro. Is this a HardSPL? Can anyone tell me what exactly is preventing me from completing the flash, and what, if anything, I can do to rectify this? Thank you
pasan said:
Thanks. It goes into the BL even when I plug it into the wall charger, but the battery does get warm so I'm assuming it's charging. But now I have across another problem; the ROM update halts at 12%, and for some reason it jumps from 10% to 12% before freezing up. Tried to push just the SPL but that just got stuck at 0% and threw an error 286 at me, which is not documented. It did how ever upgrade the IPL from 1.01 to 1.04. The current SPL is 1.04.Olipro. Is this a HardSPL? Can anyone tell me what exactly is preventing me from completing the flash, and what, if anything, I can do to rectify this? Thank you
Click to expand...
Click to collapse
Pardon? 1.04.Olipro? it actually says .Olipro at the end? because I'm pretty ****ing sure I never made a version 1.04
Oh typo there, I'm sorry. It's 1.40.Olipro I hope the Olipro suffix is still valid though.
So far two other people have reported that their units gets stuck at 12% wile flashing. This has to be more than a coincidence. Does anyone have any thoughts?
pasan said:
So far two other people have reported that their units gets stuck at 12% wile flashing. This has to be more than a coincidence. Does anyone have any thoughts?
Click to expand...
Click to collapse
i have the same problem too.and i've described it here:
http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548
but nobody answers.
Had you downloaded the wm6 Rom from htc site??
I downloaded it from the rapidshare link, on another thread in this forum. Can you try to upgrade through the memory card and tell what result you get? I don't have a memory card yet to test it on.
pasan said:
I downloaded it from the rapidshare link, on another thread in this forum. Can you try to upgrade through the memory card and tell what result you get? I don't have a memory card yet to test it on.
Click to expand...
Click to collapse
i tried it.on my screen i had this:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why??
Dear All,
I have O2 Neo G4 which went dead after I upgraded Jesterz rom.
I am starting this thread to find out a solution of how to get G4 back to life using all the tricks and helping the sufferring mankind using HTC Prophet.
How dead? Does it do anything if you plug in a charger? Can it enter bootloader?
try to remove the batteri for 24 hour and plug it inthe usb of ur computer until the charger lead appear.
then modify ur rom
thanks for the reply....
thanks for the suggesstion
tried and removed the battery for 2 days and then put on for charging the charging lit came alive for a second then went dead again still hoping it will come alive i persisted the usb charging for next 24 hrs but to no avail.
also the phone is not responding to anything i did try the wire trick the hard reset trick no result.
it is not able to enter the bootloader also
l3v5y said:
How dead? Does it do anything if you plug in a charger? Can it enter bootloader?
Click to expand...
Click to collapse
it is not able to enter the bootloader also
I have no solution that has worked for me then...
its was working at the 1st time...it freeze when i enter image...lol
then i restart it..
and try again, and its not working..
stuck at acr=1250 battery RAAC=8 temp 287
any idea?
how long have you left it to do?
Most builds take a good 15 20 minutes to start from scratch building data.img etc
looks like i over wait now lol. i left it until morning haha... from 12am until 9am? is it possible?...its not stuck its just keep on running on that battery lol...
*Sigh*
What radio and WM ROM are you running?
radio 2.14
rom 1.48
Before 1 month start all the problems.
My hd2 didn't load the system...
I make some tests and i have make an update everything to the last leo,hspl.
The phone after the update was ok but after a week stop working at all.
Black screen.
I have buy new battery htc official but still nothing.
It doesnt start....
Please help...
Are there any way to start the phone?
Sorry for my bad english...
anyone?
What ROM/RADIO?SPL versions did you flash?
Is it a TMOUS HD2?
Is there a red light when you connect the phone to the charger?
hspl 2.08
Radio Leo 2.15.50.14
Energy.Leo.21916.Sense2.5.Cookie.2.0.Jan.06
no doesnt light the led when i put it on charger.
I try with htc and they say 350 euro for changing the main board...
But after some hours i put it to another charger and the phone start in boot loader
mode.
i tryed to change radio bur crash and again the same stop working.
Any tip?
I thing i am not the one this have happent again...
And one another thing.
Today my hd2 start to the bootloader and with HSPL2_RUN i have downgrade hspl 2.08 to 1.66.
On the screen inform me success and again doesnt start up....
Probably the phone is ok but everything start with the soft...
but it still didnt start again.
Yesterday start 4 times to the tricolor mode
At first i have put the nbh file as the post to the sd and after downgrare the radio to Leo RADIO 2.07.50.27_2 from Radio_2_12_50_02_2.
The hspl became spl 2.08
After this again the same nothing and again didnt start..
I dont unterstand
i will try task 29 and after this i will flash oriinal rom if it starts...
All these say to me that it is not a hardware problem but only software...
Please help...
If hspl.exe says success, but doesn't change when you go back into bootloader, this is often connected to a stuck radio.
The only thing I can suggest is flashing your phones correct stock rom from SD,and pay attention to the blue writing,see if any part fails.
Any tip to wake
Any tip to wake up the phone?
It doesnt start again....
It drive me cazy....
Please any tip?
Anyone....?
By "wake up," do you mean turning it on?
If you're having problems turning the phone on, I usually have to pull the battery out for a good 5 minutes before putting it back in and rebooting.
My HD2 has the same problems as you man Hope there's a solution, and I really hope it's not a hardware problem. Best of luck to you!
Yes
By wake up i mean to start working, turning on....
I cant unterstant why the phone didnt start.