Hi all:
Has anyone successfully upgraded their Mogul directly from the stock 2.09 ROM? I was waiting to see whether there were problems with the 2.17 ROM (seeing the fiasco with the prior update) and never got around to it.
I have been searching the forums on this and other websites, but have not found an answer.
Thanks!
I actually upgraded from a nib mogul with the stock 2.09 with zero issues...
Great, thanks!
BTW, did you flash it from a microSD card or through ActiveSync?
right from the ruu had no problems at all...no need for card no hickups...i even have mms working properly
Related
Titan Radio ROM 3.27.00
NOTE 6/19/08:
There is absolutely no reason for anyone to be using this radio anymore. If you are looking to upgrade from 1.x radios, please use 3.35 or later.
DOWNGRADING TO THIS RADIO FROM 3.35 OR ABOVE WILL BRICK YOUR DEVICE.
This radio enables GPS and EvDO rev A.
DOWNLOAD:
REMOVED
how do we get bootloader 2? or even know that i have it? hopefully this will fix how when ever i hand up i loose singal for a few seconds and it seems i go in and out a lot when i should have good signal.
That's 2.04
thanks...ill try and wait...oh i hate waiting
can anyone post a link that is non rapidshare to the loader we need? thanks alot.
friguy33 said:
whats 2.04?
Click to expand...
Click to collapse
the bootloader. its what comes with the newest rom.
the rom is not released so unless you snaged it from here tonight you wont have it.
I was reading instructions by IMCOKEMAN - does anyone know if we can keep the 1.20 Olipro and do these instructions?
EDIT by ImCoKeMaN:
I have found that if you have issues where your device seems to be bricked and stuck in bootloader before completion of the update you can fix it by flashing via SD card.
To do this there are 3 steps:
First take the .exe file and open it with winrar. There will be a file 3.16.....nbh extract that and rename it to TITAIMG.nbh
Next format a microSD card with FAT 32 (required most are fat16 default) and copy the file TITAIMG.nbh to the root of the sd card with a card reader.
Finally place sdcard in device and reset into bootloader mode. The flash will proceed from the SD card and it should work fine. Enjoy!
Works on Telus. Had to recover from SD Card. GPS WORKS!!!!!!!!!
Telus P4000 Running Boot Load 2.40 Olipro, Radio Rom 3.27 and OS 3.16 SPRINT.
Can't wait for the Kitchen!!!!
Aximus, where did you get 2.40 olipro?
aXiMus said:
Works on Telus. Had to recover from SD Card. GPS WORKS!!!!!!!!!
Telus P4000 Running Boot Load 2.40 Olipro, Radio Rom 3.27 and OS 3.16 SPRINT.
Can't wait for the Kitchen!!!!
Click to expand...
Click to collapse
http://forum.ppcgeeks.com/showthread.php?p=168746#post168746
Here is the link your looking for.
having trouble installing the titan radio 3.27.00
when i run the file and my phone starts to update it malfunctions.......my usb port seems to disconnect on its own but physically its still connected.... can u help me??
it might just be me, but it seems that this radio doesnt work correctly with vzw text messages or mms. i am able to recieve sms but cant send, and can send mms but not recieve.
elgreek84 said:
Aximus, where did you get 2.40 olipro?
Click to expand...
Click to collapse
I got from a file called 3.16_GPS_rom__and_patched_2.05spl. I think it was ppc geeks, I am running the sprint rom on my Telus phone. Going to go back to 2.17 and Radio 2.06 seems to work better. Besides don't need GPS on my phone at this time, as I have in dash GPS.
anyone able to get MMS working on verizon? or just data in general to work on verizon?
friguy33 said:
anyone able to get MMS working on verizon? or just data in general to work on verizon?
Click to expand...
Click to collapse
Data works fine. I'll get back to you on the MMS in about 5 minutes.
MMS works fine.
DO we have to RELOCK?
I read many many posts yesterday about having to RElock the phone.
Do We need to do this before running the new Bootloader, then radio, then rom?
sudermatt said:
I read many many posts yesterday about having to RElock the phone.
Do We need to do this before running the new Bootloader, then radio, then rom?
Click to expand...
Click to collapse
I didn't. I flashed the new unlocker straight from the 1.4, then radio and then the new ROM.
so will this pretty much allow you to have gps and rev a with any rom of your choice? or do you still need to use the new roms?
hay112 said:
so will this pretty much allow you to have gps and rev a with any rom of your choice? or do you still need to use the new roms?
Click to expand...
Click to collapse
I also am curious of this as i miss having my cooked dcd rom kitchen, either way im sure a new kitchen will be released anyways, and gps is pretty neat
Hello all, i have Qwest service
i recently attempted a Rom upgrade to dcd 3.0.1.
I unlocked with olipro 2.40
then i ran the sprint 3.35 rom upgrade
and lastly tried to load dcd's Rom
all went fine (thanks to the tireless efforts of xda and ppc geeks contributors) until i tried to load dcd's rom.
my download of dcd 3.0.1 was corrupt ( i have since figured out that if you improperly input the download letters, your download will be corrupted without letting you know- always verify the file size when complete)
Because of this i ended up letting the sprint customizations run.
I have since made the change from the sprint rom 3.25 to dcd's rom but apparently, the sprint customizations, that i let run have hosed my data ability.
searching leads me to believe the best/easiest way to fix my data problem- (no data at all) is to relock my phone and load the original radio and rom
thanks to Bunvilla at PPCGeeks, i have the rom (2.13) but no one seems to have the radio (1.39)
any assistance would be appreciated- all of us Qwest subscribers (which piggy backs on Sprints network) are having a very difficult time finding any help for our phones
Does anyone have a copy of the radio or know where to find one?
Does anyone know how to make a copy of the radio and/or rom from a non-upgraded phone?
Does anyone have any other ideas how to get my data working again?
I have searched and read nearly every post on both xda and ppc site, so thanks in advance to anyone who can assist me/us
chirodj5 said:
Hello all, i have Qwest service
i recently attempted a Rom upgrade to dcd 3.0.1.
I unlocked with olipro 2.40
then i ran the sprint 3.35 rom upgrade
and lastly tried to load dcd's Rom
all went fine (thanks to the tireless efforts of xda and ppc geeks contributors) until i tried to load dcd's rom.
my download of dcd 3.0.1 was corrupt ( i have since figured out that if you improperly input the download letters, your download will be corrupted without letting you know- always verify the file size when complete)
Because of this i ended up letting the sprint customizations run.
I have since made the change from the sprint rom 3.25 to dcd's rom but apparently, the sprint customizations, that i let run have hosed my data ability.
searching leads me to believe the best/easiest way to fix my data problem- (no data at all) is to relock my phone and load the original radio and rom
thanks to Bunvilla at PPCGeeks, i have the rom (2.13) but no one seems to have the radio (1.39)
any assistance would be appreciated- all of us Qwest subscribers (which piggy backs on Sprints network) are having a very difficult time finding any help for our phones
Does anyone have a copy of the radio or know where to find one?
Does anyone know how to make a copy of the radio and/or rom from a non-upgraded phone?
Does anyone have any other ideas how to get my data working again?
I have searched and read nearly every post on both xda and ppc site, so thanks in advance to anyone who can assist me/us
Click to expand...
Click to collapse
so you know this is an issue it seems with all new roms with the new sprint radio. i don't have any Data connection on mine as of this point and even after re locking and unlocking again (5 times) i still don't have data. i game from 2.40 oli , Nexvison 2.3.1.02. VZW and 3.27 Radio. i get authentication problems when trying to access the National Data Network. "user name and password incorrect.
you do need to go back to a stock rom and compatible radio to get your data working before attempting the upgrade again.
however, this doesnt have to be radio 1.39.
either relock or change to olipro-1.20, flash your original stock rom, and flash radio 2.17. then you should be able to get your data working, although it may take a call to qwest.
i saw iota mentioned in the topic but not the post... qwest does not include IOTA in their ROM. sprint IOTA will only work for sprint.
Thanks for the reply DCD- and thanks again for all your hard work.
You mentioned to downgrade to my original ROM and load the compatible RADIO from 2.17.
-Does this mean the complete sprint RADIO and ROM 2.17 or just the RADIO portion?
- if it's just the radio portion, where would i find that ( i have searched endlessly, hence the delay in posting a reply) ?
-if it is the complete radio and ROM, am i supposed to flash my oem ROM 1st or flash it after the 2.17 radio and ROM (like we do to upgrade thru 3.35 to DCD 3.0.1) ?
- good to know qwest doesn't use IOTA, although i am curious what IOTA actually is
Obviously, anyone's help here is appreciated
well i might be able to come to your rescue again. I believe if u can load a ROM that lets u have access to the extrom, (read and write to it) i have the original content that came in the extrom for qwest. the sprint upgrade rewrites over the qwest stuff and puts in the sprint stuff. i know i have the contents of the extrom for qwest but im gonna look here in my computer because i just might have the iota for qwest. otherwise i dont know why im hanging on to this 1 IOTA in my "qwest phone folder"
ill post the contents in a second post have to upload to rapidshare
ok i hope these work for u;
http://rapidshare.com/files/104457472/QWEST_2.13_extrom.rar
http://rapidshare.com/files/104457828/qwest_IOTA.rar
u can use 1.47 radio instead of 1.39, it doesnt matter which radio u use between the 2, 1.47 is better anyways.
u just have to load a rom that allows u to unhide and write to the extrom/ dcd 3.01 and his other version can be done but u have to know how to manipulate it, otherwise DCD roms have the extrom hidden and he removed some reg entries
and stuff so u probably want to use no2chem rom or something/ then dump the qwest2.13 extrom into the extrom and see what happens/ but this is what was in my qwest rom extrom before i cleared it.
good luck
Well , i'm not exactly sure what to do with this information you have given me, but i will root around these forums so more and see if i can't make sense of it.
unless someone else decides to chime in
thanks again, Bunvilla
i came home for lunch and my buddy just bought a qwest mogul/ i loaded the unlocker 240 / next and it is where i think u went wrong is that u need to load the radio 3.35 FIRST then the rom/ cause i next loaded radio 3.35 and then a DCD custom 3.01 Rom with a whoppin 29mbs of memory free after installation/
i was done in 30min/ I did however have to get the SPC code to get into the NAM settings because it changed his MIN to something else/ it took 5min to get spc code and then a few min to correctly add his MIN and the right security format for the data connection/ everything went smooth and i made back to work with almost 10 min left on my lunch hour/
by the way i would get a message saying that" the account was not authorized to call that number" and then quote off some code/ but when i changed the NAM settings back it was good to go
Ok, I am going to get flamed I am sure... but I was trying to update to the 3.39 radio on my Tytan earlier today. I previously had the 3.35 radio and DCD's 3.12 ROM on there (using olipro2.40). I followed the directions on the forums best I could, and reflashed from 2.40 to 1.20 in the olipro. Now it is just stuck there. I cant reflash it to 2.4 or anything? Also everyone keeps talking about the RUU for the radio to flash it, but I have searched for two hours and cannot find a simple post about where I am supposed to find this program. Just a billion mentions of the RUU folder... which doesnt help me at all.
I just went ahead and reloaded the dcd 3.12 rom using olipro 1.20 and it looks to be booting, but this still doesnt help me with the radio issue... ( the SD card option will not work for me either.) Thanks for any help
Gaigebacca said:
Ok, I am going to get flamed I am sure... but I was trying to update to the 3.39 radio on my Tytan earlier today. I previously had the 3.35 radio and DCD's 3.12 ROM on there (using olipro2.40). I followed the directions on the forums best I could, and reflashed from 2.40 to 1.20 in the olipro. Now it is just stuck there. I cant reflash it to 2.4 or anything? Also everyone keeps talking about the RUU for the radio to flash it, but I have searched for two hours and cannot find a simple post about where I am supposed to find this program. Just a billion mentions of the RUU folder... which doesnt help me at all.
I just went ahead and reloaded the dcd 3.12 rom using olipro 1.20 and it looks to be booting, but this still doesnt help me with the radio issue... ( the SD card option will not work for me either.) Thanks for any help
Click to expand...
Click to collapse
RUU stands for Rom Update Utility. I have heard that flashing a radio ROM using a RUU with Olipro 2.4 is problematic. The SD card method is much better and easier. Can you get into bootloader? (power/camera/reset)
...
I have been able to get back to everything the way I had it before (as far as ROM and olipro version) and I can get into bootloader, but I dont have a compatible sd card.
Gaigebacca said:
I have been able to get back to everything the way I had it before (as far as ROM and olipro version) and I can get into bootloader, but I dont have a compatible sd card.
Click to expand...
Click to collapse
If its up and running as before I would buy/borrow a SD card and update your radio that way. Why can't you use the SD card method?
Ooops...just saw that you don't have a compatible card. The microSD card in your phone will work fine if its not SDHC.
I dont have a card reader or access to one in order to format the card and put the file in the root.
Gaigebacca said:
I dont have a card reader or access to one in order to format the card and put the file in the root.
Click to expand...
Click to collapse
Sorry I don't have another idea...I wouldn't attempt any further radio mods until you can get a SD card with the radio ROM on it. Too risky you might muck up your phone and at least now its working. If I remember correctly its the newest 3.x radios that were causing problems when being flashed with a RUU on Olipro 2.4. Perhaps one of the senior members has an idea.
I'd like to upgrade my VZW XV6800 to DCD's Titan 3.1.2 with radio 3.39.10, but have some questions. I've read the Wiki and FAQ several times through, but am having a hard time understanding the correct order of upgrading the radio and ROM.
I've successfully upgraded bootloader to 2.40 using Hard-SPL-MFG.exe
Do I next upgrade the radio? Or do I load DCD's 3.1.2 and then upgrade the radio? (After writing that out I think I would upgrade the radio...looking for confirmation.)
Radio or you will be screwed. I speak from experience. Get a SD card and use that method.
good advice on both accounts.
did the radio first, but was then unable to get past the bootloader and unable to connect w/ ActiveSync. followed the SD directions and now i'm running everything i wanted!
I Flashed ROM Then Radio
Tonight I just finished successfully flashing my phone for the first time. I updated the boot loader using titan_SPL_2.40-olipro.exe, then I attempted to update the radio but actually did not due to a mistake on my part, then I successfully updated the ROM to dcd_titan_3.1.2.exe. Upon a restart, I realized the radio was not updated based upon the Verizon splash screen so I re-entered the bootloader and eventually flashed the radio. Once I finished flashing the radio I restarted and was presented with WM 6.1 and a usable phone.
Easy Way
The easiest way i found was after the new bootloader to go and use the Alltel Stock ROM with the 3.39 radio. This will upgrade your radio without you having to call Verizon. Then load DCD's ROM. Again you should not have to call Verizon or mess with SD cards or anything.
The easiest way i found was after the new bootloader to go and use the Alltel Stock ROM with the 3.39 radio. This will upgrade your radio without you having to call Verizon. Then load DCD's ROM. Again you should not have to call Verizon or mess with SD cards or anything.
Click to expand...
Click to collapse
The Alltel rom has Radio 3.37.20, not 3.39.10.
schwillyd530 said:
The easiest way i found was after the new bootloader to go and use the Alltel Stock ROM with the 3.39 radio. This will upgrade your radio without you having to call Verizon. Then load DCD's ROM. Again you should not have to call Verizon or mess with SD cards or anything.
Click to expand...
Click to collapse
Also not everyone has to call Verizon. I have flashed once to stock, DCD 3.0.4 and DCD 3.1.20 and have yet to call or reenter anything.
Hello guys, I have a little bit of a problem, and I am hoping that you guys can help me out. About 10 months ago I upgraded from my stock ROM to dcd's 2.3.2. rom and 3.27.00 radio. Every thing went fine, loaded up 2.40 olipro and the installation went perfect. Now last month I saw that dcd came out with 3.2.6 and wanted to upgrade my rom and radio, but this is were i'm running into problems. I was able to flash the 3.2.6. rom, but I am unable to flash the radio. I have searched up and down these forums and checked out the wiki's and havn't been able to find a solution. So now all i'm left with is a phone that can't make a phone call but is still able to send sms messages. If anyone has any helpful tips or even a solution to my problem it would be much appricated.
I thought the 3.27 radio works with 3.2.6. What is happening when you try to flash the radio? and what method are you using to flash it (SD card or pc)? Also when you bootup the phone does it say 3.27 radio still? I believe all the newer DCD roms need a carrier cab have you installed the cab? I'm pretty sure the phone won't be able to make calls without the cab installed. 1 more Q what service do you have?
shield001 said:
I thought the 3.27 radio works with 3.2.6. What is happening when you try to flash the radio? and what method are you using to flash it (SD card or pc)? Also when you bootup the phone does it say 3.27 radio still? I believe all the newer DCD roms need a carrier cab have you installed the cab? I'm pretty sure the phone won't be able to make calls without the cab installed. 1 more Q what service do you have?
Click to expand...
Click to collapse
When I flash the radio it goes to 8% flashes a red light and then resets. I have also tried both methods of flashing but none works. When I bootup the phone it does still say 3.27 as the radio. I have also tried to install a carrier cab but have had no luck.
Try updating to Hard SPL 2.47
The 3.27 Radio is NOT compatible with ANY DCD version 3.X and higher..... Have you read the Wiki? Can you flash the radio using the SD card method? All of your questions have answers in the Wiki.....
You should flash back to 2.3.2. Go into the bootloader(tri-color screen) and then flash 2.3.2 to the phone..... reboot it.... it should load up ok.... If this works for you to this point, you have several options to upgrade the radio ..... Read the Wiki....
azclown said:
The 3.27 Radio is NOT compatible with ANY DCD version 3.X and higher..... Have you read the Wiki? Can you flash the radio using the SD card method? All of your questions have answers in the Wiki.....
You should flash back to 2.3.2. Go into the bootloader(tri-color screen) and then flash 2.3.2 to the phone..... reboot it.... it should load up ok.... If this works for you to this point, you have several options to upgrade the radio ..... Read the Wiki....
Click to expand...
Click to collapse
I looked over the wiki again and was able to re-flash to 2.3.2. Thanks for your help guys.