Hey all... I just upgraded my mogul to the 2.4 bootloader, and updated my rom to one of the GPS's (not DCD's, but a modified version of it)...
Now, my SPL is locked, and I have no access to diag (##3424) to change it in QPST... My PRL also switched to a sprint PRL because I loaded a stock sprint rom after relocking the phone, and I can't use OTASP to correct it.
Anyone got some help for me? Do I need to switch roms to fix this?
Related
Hello all
i need some help. just finished upgrading my mogul and it keeps on rebooting after a few seconds after it reaches the today screen. i have tried dcd 2.2.4 and 2.2.6 with same results.
i believe if i keep it plugged into the computer it will stay on. any help please!??!
thanks
I just had the exact same problem. Did you load any other software after flashing the radio and rom?
Unfortunately i couldnt find a solution that involved DCD's roms. I flashed to 2.4 2.6, 1.6 new radios but nothing worked. I had to use no2chems nuerom 2.0 buld 5044 which works great, but doesnt have the verizon specifics. GPS is good and its fast. If anyone else comes up with something please let us know as i would like to have some of that software back.
this has been posted many times.
most likely you do not have the new bootloader installed.
http://forum.ppcgeeks.com/showthread.php?t=9093
go here get the 2.40 bootloader and start over
thanks for the quick responses!!
first time doing all this, but nothing to hard i think in my opinion. you just have to get over the learning curve.
i used this guide: http://forum.ppcgeeks.com/showthread.php?t=17667
which bootloader should i use if that guide led me to the wrong one?
also where can i find the other rom?
thanks for the bootloader. i will give it a shot now
2. If you are using 3.16+ code then you need either:
>>>a. The reLocker if upgrading to the unofficial carrier released rom
>>>b. the unLocker (new) 2.40 if running custom built roms
you'll learn the terms eventually....
just an FYI
do a search on here and on google FIRST if you run into problems because most likely you'll not be the first to have the issue.
but if you can't find any answers most people here will be willing to help
just verified, i am already using 2.40
also im not new to forums... i am well aware of google and search tools. these forum websites are getting annoying with spam protection that half the time when i tried doing a search, it would not complete it.
i knew i was running a stock 3.16
did you have an old custom bootloader? you need to relock it if so then run the 2.40
if its like mine then when you relock it you will lock up on the bootloader and have to do exit bootloader to get back to the splash screen where it will lock again. I even flashed back to the stock rom and it relaoded. I think it may be an glitch in the s.27 radio personally.
i went from the latest stock to custom using the guide above. is there a need to relock it or do you leave it unlocked?
if you go from stock to custom bootloader and upgrading the radio 3.27 and a DCD rom you don't need to relock it.
you only need to relock for the leaked sprint rom
did you upgrade the radio too?
yes i used titan_radio_3.27.00
when i go into boot mood i get this:
TITA100
SPL-1.20.0lipra
Click to expand...
Click to collapse
is this how it should be?
please and thank you everyone for your help!!!
that should say olipro 2.40
who is your carrier? sprint, verizon.......
my carrier is sprint
http://forum.ppcgeeks.com/showthread.php?t=9093
run the 2.40 spl and start over
okay so you want me to run the hard spl again and then dcd??? or should i do the titan radio 3.27.00 before dcd
Hello all, i have Qwest service
i recently attempted a Rom upgrade to dcd 3.0.1.
I unlocked with olipro 2.40
then i ran the sprint 3.35 rom upgrade
and lastly tried to load dcd's Rom
all went fine (thanks to the tireless efforts of xda and ppc geeks contributors) until i tried to load dcd's rom.
my download of dcd 3.0.1 was corrupt ( i have since figured out that if you improperly input the download letters, your download will be corrupted without letting you know- always verify the file size when complete)
Because of this i ended up letting the sprint customizations run.
I have since made the change from the sprint rom 3.25 to dcd's rom but apparently, the sprint customizations, that i let run have hosed my data ability.
searching leads me to believe the best/easiest way to fix my data problem- (no data at all) is to relock my phone and load the original radio and rom
thanks to Bunvilla at PPCGeeks, i have the rom (2.13) but no one seems to have the radio (1.39)
any assistance would be appreciated- all of us Qwest subscribers (which piggy backs on Sprints network) are having a very difficult time finding any help for our phones
Does anyone have a copy of the radio or know where to find one?
Does anyone know how to make a copy of the radio and/or rom from a non-upgraded phone?
Does anyone have any other ideas how to get my data working again?
I have searched and read nearly every post on both xda and ppc site, so thanks in advance to anyone who can assist me/us
chirodj5 said:
Hello all, i have Qwest service
i recently attempted a Rom upgrade to dcd 3.0.1.
I unlocked with olipro 2.40
then i ran the sprint 3.35 rom upgrade
and lastly tried to load dcd's Rom
all went fine (thanks to the tireless efforts of xda and ppc geeks contributors) until i tried to load dcd's rom.
my download of dcd 3.0.1 was corrupt ( i have since figured out that if you improperly input the download letters, your download will be corrupted without letting you know- always verify the file size when complete)
Because of this i ended up letting the sprint customizations run.
I have since made the change from the sprint rom 3.25 to dcd's rom but apparently, the sprint customizations, that i let run have hosed my data ability.
searching leads me to believe the best/easiest way to fix my data problem- (no data at all) is to relock my phone and load the original radio and rom
thanks to Bunvilla at PPCGeeks, i have the rom (2.13) but no one seems to have the radio (1.39)
any assistance would be appreciated- all of us Qwest subscribers (which piggy backs on Sprints network) are having a very difficult time finding any help for our phones
Does anyone have a copy of the radio or know where to find one?
Does anyone know how to make a copy of the radio and/or rom from a non-upgraded phone?
Does anyone have any other ideas how to get my data working again?
I have searched and read nearly every post on both xda and ppc site, so thanks in advance to anyone who can assist me/us
Click to expand...
Click to collapse
so you know this is an issue it seems with all new roms with the new sprint radio. i don't have any Data connection on mine as of this point and even after re locking and unlocking again (5 times) i still don't have data. i game from 2.40 oli , Nexvison 2.3.1.02. VZW and 3.27 Radio. i get authentication problems when trying to access the National Data Network. "user name and password incorrect.
you do need to go back to a stock rom and compatible radio to get your data working before attempting the upgrade again.
however, this doesnt have to be radio 1.39.
either relock or change to olipro-1.20, flash your original stock rom, and flash radio 2.17. then you should be able to get your data working, although it may take a call to qwest.
i saw iota mentioned in the topic but not the post... qwest does not include IOTA in their ROM. sprint IOTA will only work for sprint.
Thanks for the reply DCD- and thanks again for all your hard work.
You mentioned to downgrade to my original ROM and load the compatible RADIO from 2.17.
-Does this mean the complete sprint RADIO and ROM 2.17 or just the RADIO portion?
- if it's just the radio portion, where would i find that ( i have searched endlessly, hence the delay in posting a reply) ?
-if it is the complete radio and ROM, am i supposed to flash my oem ROM 1st or flash it after the 2.17 radio and ROM (like we do to upgrade thru 3.35 to DCD 3.0.1) ?
- good to know qwest doesn't use IOTA, although i am curious what IOTA actually is
Obviously, anyone's help here is appreciated
well i might be able to come to your rescue again. I believe if u can load a ROM that lets u have access to the extrom, (read and write to it) i have the original content that came in the extrom for qwest. the sprint upgrade rewrites over the qwest stuff and puts in the sprint stuff. i know i have the contents of the extrom for qwest but im gonna look here in my computer because i just might have the iota for qwest. otherwise i dont know why im hanging on to this 1 IOTA in my "qwest phone folder"
ill post the contents in a second post have to upload to rapidshare
ok i hope these work for u;
http://rapidshare.com/files/104457472/QWEST_2.13_extrom.rar
http://rapidshare.com/files/104457828/qwest_IOTA.rar
u can use 1.47 radio instead of 1.39, it doesnt matter which radio u use between the 2, 1.47 is better anyways.
u just have to load a rom that allows u to unhide and write to the extrom/ dcd 3.01 and his other version can be done but u have to know how to manipulate it, otherwise DCD roms have the extrom hidden and he removed some reg entries
and stuff so u probably want to use no2chem rom or something/ then dump the qwest2.13 extrom into the extrom and see what happens/ but this is what was in my qwest rom extrom before i cleared it.
good luck
Well , i'm not exactly sure what to do with this information you have given me, but i will root around these forums so more and see if i can't make sense of it.
unless someone else decides to chime in
thanks again, Bunvilla
i came home for lunch and my buddy just bought a qwest mogul/ i loaded the unlocker 240 / next and it is where i think u went wrong is that u need to load the radio 3.35 FIRST then the rom/ cause i next loaded radio 3.35 and then a DCD custom 3.01 Rom with a whoppin 29mbs of memory free after installation/
i was done in 30min/ I did however have to get the SPC code to get into the NAM settings because it changed his MIN to something else/ it took 5min to get spc code and then a few min to correctly add his MIN and the right security format for the data connection/ everything went smooth and i made back to work with almost 10 min left on my lunch hour/
by the way i would get a message saying that" the account was not authorized to call that number" and then quote off some code/ but when i changed the NAM settings back it was good to go
**Posted at PPCG also.....
Hey guys just wanted to see if you can shed some light on my situation. I have flashed other TItan's before with no issues and then came this little butterfly.
I flashed it to Metropcs from stock Sprint ROM. Then I unlocked it using 2.47 SPL. This is where its a bit different for me. I have always used 2.4 to unlock, not sure if that made a difference this time.
Then I tried running the RELOADED ROM with no luck. Then I tried Ryans Cricket ROM with no luck. It starts with HTC and then when it goes to the next splash screen it gets stuck there for hours.
I even tried to put a basic kitchen together from PPCKitchen, but that didn't even work either...
I am all out of ideas.
I would give you specs, but I cant get into phone. I can at least get it into bootloader mode to load different ROMS.
Here is what I see when I soft reset:
Home splash screen
D 3.2.6
R 1.32.00
2.4 SPL????? **Tried this already and that didn't do anything. In bootloader stills hows 2.47...
Did you update your radio to 3.42...the ROMS you are trying to use need to have a radio of 3.35+
To get the radio....easiest way to do that, instead of messing with it alone...do the following
unlocker 2.40olipro/nuesp2.47--->stock ROM--> then custom ROM
you need to upgrade radio
You rom and spl are fine. Just upgrade your radio to something like 3.42.40 or 3.42.50
I need a little help with this phone. I have a AT&T Tilt that I've unlocked and flashed at least a dozen ROMs and it's no trouble at all to use it on my T-Mobile account. My co-worker here has a Sprint Mogul that he wants to use on his Verizon account and I'm having trouble doing it.
I have installed Hard-SPL 2.40-olipro, Radio 3.42.50, and DCD 3.2.6. I also have a guy Verizon that will enter my ESN in their system. My question is How do I get to the provisioning menu and what are the Verizon settings?
I think it best to relock the phone by the following instructions. This should install a Verizon PRI and PRL. http://forum.ppcgeeks.com/showthread.php?t=21161
After you have the stock rom on and working flash the custom rom and the dcd carrier cab. Then add the esn or even add the esn while using the stock rom. Also update using *228.
After relocking the Sprint Mogul it woun't allow a Verizon ROM to be flashed.
Did you follow the instructions in my link I provided?
Ok I have SPL 1.20 loaded the verizon rom but I have no radio. I need 1.30.60. Looking for it now
The link I provided has the rom and radio included together. No searching needed.
splash screen says no radio.
reflash then because it is included.
I currently run BAMF 1.09 rom with the radio that goes along with it. I sold my phone and installed the original HTC Factory Rom but i forgot to install the radio to go along with it. the HTC Rom is about 6-7 months old so my question is what radio do i need for this? Also, i assume all i need to do is install the radio through bootloader and it should have a connection. Currently the verizon told the person i sold the phone to the radio was broken. thanks for your help in advance. I forgot to check but believe the ROM is FROYO.
Did you just restore from a nandroid or did you install a stock file? Your easiest bet is to install a stock file from the bootloader (JUST like a radio) to restore completely to stock.
http://forum.xda-developers.com/showthread.php?t=1310014
Just be careful.