IPL 2.10
SPL 2.20.0001
The IPL version seems a bit short after reading a bit in the forums..
Has the IPL been broken? is this beyond repair?
have you checked the wiki? ipl is supposed to be like that, only ipl has more numbers. nothing wrong there mate!!!
This is what I was worried about, IPL has only these numbers, it's shorter than the SPL version, I was thinking that this was the reason I cannot bring it passed BootLoader..
All the ROM's (NVID) that I flash with complete and the Phone resets, to a full green screen and then back to BootLoader
noonas said:
This is what I was worried about, IPL has only these numbers, it's shorter than the SPL version, I was thinking that this was the reason I cannot bring it passed BootLoader..
All the ROM's (NVID) that I flash with complete and the Phone resets, to a full green screen and then back to BootLoader
Click to expand...
Click to collapse
Flash HardSPL man~~~ or forever 3 colors~~~
Related
my gfs hermes speaker is busted so im sending it back in for a warranty return. i talked to att and they said that upgrading with the official htc rom wont void the warranty and yada yada. the phone at this point is
ipl 1.04
spl 2.10olipro
herm 100
i have the official official htc wm6 rom for the hermes. my question is how do i undo the ipl and spl? originally it shipped from at&t with
ipl 1.03
spl 1.11
herm 100
caztronics said:
my gfs hermes speaker is busted so im sending it back in for a warranty return. i talked to att and they said that upgrading with the official htc rom wont void the warranty and yada yada. the phone at this point is
ipl 1.04
spl 2.10olipro
herm 100
i have the official official htc wm6 rom for the hermes. my question is how do i undo the ipl and spl? originally it shipped from at&t with
ipl 1.03
spl 1.11
herm 100
Click to expand...
Click to collapse
I've never downgraded IPL or SPL but other than that I've gone back to original config with my UK Vodafone branded Hermes.
There is a section in Mrvanx's guide on SPL downgrading here http://forum.xda-developers.com/showthread.php?t=299462 but you may need to search a bit further for the IPL downgrade.
Good Luck.
so at this point my goal is to follow mrvanx guide and downgrade the ipl and spl and then i was planning to reinstall the officially released wm6 upgrade in the hopes that it would put its own version of its ipl/spl on the phone. the problem im encountering is when i run the downgrader the phone asks me will i allow bl.exe to run and i click yes
it goes into the red/green/blue/white screen and says its
herm100
ipl-sspl by des
herm100
spl-1.09.ds
wtf is that? it wont let me go past this point, ie i get an error when it tries to verify information from the phone. i can restart the phone and it goes back to windows and olipro2.10 --- im not sure what direction to go? should i try to put an original wm5 rom on the phone then try to downgrade again or what?
hard spl is the way to go i think
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
i have hard spl 2.10.... im trying to get rid of it and return the phone to factory like conditions, well not really factory cus im going for the official wm6 but essentially i cant send my phone in for the warranty with olipro on it so im trying to ditch it, but the posted methods arent working for me
Searching returned almost 30 different threads. Have you looked here
http://forum.xda-developers.com/showthread.php?t=314107
Are you following the MrVanx guide carefully? I have never had an issue following the steps carefully. The info you are getting is because it is using the force SSPL option, which it should. I would suggest you try again, following the directions very carefully. Good luck. It really should work.
when it gets to the screen where i see spl-1.09.ds the ruuwrapper provided from mrvanxs guide says "Verifying the information on your Hermes... Please wait..."
this is where i get an error 260 and its asking that i check the usb cable and what not which i know isnt the issue. im gonna try this on the other comp in my house which is xp. i have been trying this on a vista machine
so it worked on my windows xp rig. once i downgraded the spl, i reinstalled the official wm6 and it upgraded the ipl to 1.04 and the spl to 2.03 which im happy with and have already placed my order for the warranty exchange.
thanks for the help to those who helpful
Does anyone have a stock-standard JasJam with Telstra in Australia, which has never been upgraded with HardSPL or a cooked version of WM6?
Or if you have upgraded, can you recall what the stock standard settings should look like ?
When I enter into bootloader mode (if that's the correct terminology) by holding down the OK and Power buttons, and pressing the reset button at the bottom of the unit with the stylus, what should I see ??
I am currently seeing -
HERM100
IPL-1.00
and
HERM100
SPL-1.06
Is this the way it should look if it has never been upgraded with HardSPL or a cooked ROM ?
Thanks in advance.
Why do you need to know this?
If it is for warranty, dont worry - I sent mine back with a cooked ROM and HardSPL and they fixed it no worries at all. They did however flash it with the latest Telstra firmware, which I promptly replaced when I got home.
Cheers!
I'm looking at my very green eBay purchase of an untouched Telstra JasJam.
IPL Ver 1.01
SPL Ver 1.06
(lets see how long it takes me to brick it)
oblongit said:
I'm looking at my very green eBay purchase of an untouched Telstra JasJam.
IPL Ver 1.01
SPL Ver 1.06
(lets see how long it takes me to brick it)
Click to expand...
Click to collapse
NO lets not.
Flash HardSPL BEFORE DOING ANYTHING.
bricking jasjam
I agree with MRVANX, I highly recomend not to brick the jasjam, I accidently bricked mine only response I got from it was the red pwr led, totally stuffed and a waste of A$1300
my Jasjam was
IPL : 1.01
SPL : 1.11
This was a stock jasjam from telstra as of Oct. 06. Not that anymore.
Hi guys
before, my htc tytn had a problem, it not recognize the gsm sim and no IMEI showed on informations of the PDA.
I supposed that it was a problem of radio rom, and I followed the instructions given on (http://forum.xda-developers.com/showthread.php?t=293665) to unlock and update my radio rom, unfortunately, after the operation began the spl1.60 was downgraded to 1.40.Olipro but can't progress in flashing, the htc hermes SIM CID Unlocker 3.12.3.7 has encountered an 262 (update error), a recovery operation was guided but no result, from this error my htc still showing the three colours screen like below:
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
please help me to restore my phone, there is indispensable for my job to get e-mails
thanks
If you're using XP then update .net framework to 3.5.
Go to activesync settings on pc and untick "Allow USB connection".
Reconnect Hermes to PC, go to bootloader (you need to reset to bootloader, true bootloader, not bricked bootloader). Run RUU_Wrapper.exe again. Should get you out of tricolour screen.
When you finish unlocking the Hermes install Hard SPL V7, go to post 1160, page 116 of this thread for sd card method - http://forum.xda-developers.com/showthread.php?t=296722
Cheers...
???
Thank you for your response but what do you mean by (you need to reset to bootloader, true bootloader, not bricked bootloader).
At the moment you can read the IPL and SPL on your screen, 3 coloured bands running down the screen. This is NOT true bootloader. You need to hold power, ok button above flywheel and reset with the stylus to go to real bootloader. Looks the same but is real and not a cocked up version.
Cheers...
Yes, but when I am doing this, the same screen become to me, with :
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
I suppose that the real bootloader was replaced by the second one from Olipro.
regards.
No, the info you give is right, you upgraded the SPL to 1.40. However, just doing a reset with stylus may bring you to that screen but there may be a fundamental difference in how it flashes the SPL again. You need to do the bootloader reset to make sure that there will be no problems upgrading or you may end up with an unrecoverable brick. It may be fine to use the "bootloader" screen you get with a reset, but its your Hermes you will loose if something goes kaka.... And withot Hard SPL V7, you may not be able to recover it...
Cheers...
IPL 1.04
SPL 1.40OLI
NO GSM
NO O/S
someone who can help me
Has been seen, many times. Search "No GSM error"...
See my IPL AND SPL i dont find any solution for this can same one help me
Now I have
IPL 1.01
SPL 1.40oli
NO GSM
and can´t flash any RADIO
please help-me
eclipsept said:
Now I have
IPL 1.01
SPL 1.40oli
NO GSM
and can´t flash any RADIO
please help-me
Click to expand...
Click to collapse
have you SuperCID your phone as of yet? Sounds like it is not unlocked.
Try that, and let me know if that makes a difference.
Cheers
It sounds like the radio rom is corrupted... If you can try to flash the ORIGINAL SHIPPED STOCK ROM on to your hermes... It MIGHT fix the "No GSM" error...
If this doesn't work then you won't be able to use the Hermes as a phone again but you can load other OS's on and use as a PDA....
mikendawn, Super CID WON'T work to repair the radio rom. You seem to think its the be all and end all solution... Unfortunately this isn't the case...
Loading Hard SPL V7 on is as good as Super CIDing your Hermes as all it does is allow you to put other carrier/cooked roms onto your Hermes and allow you to use them.
No, not quite that, I thought his phone wasn't SuperCID. I didn't think it was the end all solution. Just thought it sounded like his phone was CID Locked.
Cheers
here can find a original rom for my phone
hello, I'm Lucia is the 3nd post one of my friends told me that I see the solution to my problem here.
I have a big problem, my qtek 9100 turn with the three (3) color (bootloader).
IPL 2.21.0001
SPL 2.21
I just flashed but nothing good and even the hard reset
please help me
ewoenam said:
hello, I'm Lucia is the 3nd post one of my friends told me that I see the solution to my problem here.
I have a big problem, my qtek 9100 turn with the three (3) color (bootloader).
IPL 2.21.0001
SPL 2.21
I just flashed but nothing good and even the hard reset
please help me
Click to expand...
Click to collapse
to succeed in doing Flash, you should follow the guidelines given by vippie
check out his thread >>> http://forum.xda-developers.com/showthread.php?t=298613&highlight=button+rom
ewoenam said:
hello, I'm Lucia is the 3nd post one of my friends told me that I see the solution to my problem here.
I have a big problem, my qtek 9100 turn with the three (3) color (bootloader).
IPL 2.21.0001
SPL 2.21
I just flashed but nothing good and even the hard reset
please help me
Click to expand...
Click to collapse
Sorry to say but you’ve bricked your phone
This is what you have
IPL 2.21.0001 = G4 Device
SPL 2.21 = G3 Device
You would need to put a G4 SPL back in the phone
To my knowledge nobody has been able to fix this