Related
<<Please note this upgrade will make your softbank bootloader to 1.09>>
Release on 29/11/2006
Download at hTC Japan website
ftp://210.136.175.150/F1_RUU/RUU_X01HT_1.33.761.4_1.14.00.10.exe
http://babelfish.altavista.com/babe...//www.japan.htc.com/product_x01ht-down001.htm
cannot unlock?
I'm try to upgrade to Sotfbank new ROM and sucessfully. But it is sim locked.
Is it can sim unlock?
please help
julianfong said:
<<Please note this upgrade will make your softbank bootloader to 1.09>>
Release on 29/11/2006
Download at hTC Japan website
ftp://210.136.175.150/F1_RUU/RUU_X01HT_1.33.761.4_1.14.00.10.exe
http://babelfish.altavista.com/babe...//www.japan.htc.com/product_x01ht-down001.htm
Click to expand...
Click to collapse
Sorry, but this is already old news. This rom is recommended for installation by Softbank. The bootloader seems to be modified 1.09. SuperCID before installing this rom.
http://forum.xda-developers.com/showthread.php?t=284699&highlight=softbank
shchan68 said:
I'm try to upgrade to Sotfbank new ROM and sucessfully. But it is sim locked.
Is it can sim unlock?
please help
Click to expand...
Click to collapse
Did you SUPERCID the rom? This rom was discussed in the forum and it was recommended to unlock to SUPERCID the phone first.
Anyone try this yet? And advantages in flashing my 8525 with this?
MilanoRex said:
Anyone try this yet? And advantages in flashing my 8525 with this?
Click to expand...
Click to collapse
Dont flash it with this rom. You will be stuck with SPL 1.09.
This rom is recommended by softbank for installation because of some changes made in their network after APRIL 1st 2007.
So right now people here are looking into this matter...i will most likely install
it in a matter of weeks.
aquasesh said:
Dont flash it with this rom. You will be stuck with SPL 1.09.
This rom is recommended by softbank for installation because of some changes made in their network after APRIL 1st 2007.
So right now people here are looking into this matter...i will most likely install
it in a matter of weeks.
Click to expand...
Click to collapse
don't jump the gun. we still have more than 3 months before apr 1. someone may be able to crack the password for the new ap before that. let's keep our fingers and toes crossed...
downgrade bootloader need help
i have x10HT
my bootloader is 1.06
i already download the downgrade bootloader
but my active sync don't work
is there still have a new way to downgrade bootloader without activesync?
thanks
dannniel said:
i have x10HT
my bootloader is 1.06
i already download the downgrade bootloader
but my active sync don't work
is there still have a new way to downgrade bootloader without activesync?
thanks
Click to expand...
Click to collapse
Maybe you should try to fix your AS... whats wrong with it...?
@harry
Youre right, i should wait...im not so keen on reinstall anyway
x01ht 1.06 bootloader
julianfong said:
<<Please note this upgrade will make your softbank bootloader to 1.09>>
Release on 29/11/2006
Download at hTC Japan website
ftp://210.136.175.150/F1_RUU/RUU_X01HT_1.33.761.4_1.14.00.10.exe
http://babelfish.altavista.com/babe...//www.japan.htc.com/product_x01ht-down001.htm
Click to expand...
Click to collapse
Dear Julian
I would like to flash my x01ht back to 1.06 bootloader. (now with DoCo ROM)
Do you know where I can find it out?
If so, would you please tell me.
Thank you and Happy new year!
W.E.
Stupid question
Just a question about this ROM and superCID.
I have unlocked and superCIDed my device.
Does that mean the device stays superCIDed, and I can install this ROM, and if I don't like it, revert to another? (in my case the French Qtek one).
What advantages does this ROM hold over the DoCoMo one?
Thanks in advance.
Yannick
julianfong said:
<<Please note this upgrade will make your softbank bootloader to 1.09>>
Release on 29/11/2006
Download at hTC Japan website
ftp://210.136.175.150/F1_RUU/RUU_X01HT_1.33.761.4_1.14.00.10.exe
http://babelfish.altavista.com/babe...//www.japan.htc.com/product_x01ht-down001.htm
Click to expand...
Click to collapse
Is this ROM the latets available for Softbank phones ?
I need to flash my phone back to its original ROM... So I'd like to be sure I am not doing a mistake with this one...
Alcibiade said:
Is this ROM the latets available for Softbank phones ?
I need to flash my phone back to its original ROM... So I'd like to be sure I am not doing a mistake with this one...
Click to expand...
Click to collapse
Seems like the right one, with the right radio version. Anyway, why are you flashing it back to original? Selling your phone? Sending in to repair? *curious*
auyongtc said:
Seems like the right one, with the right radio version. Anyway, why are you flashing it back to original? Selling your phone? Sending in to repair? *curious*
Click to expand...
Click to collapse
Some problems with it (Half bricked)
Not even sure Ill be able to fash it back but if I do I ll try to get it fixed...
http://forum.xda-developers.com/showthread.php?t=302629
I've tried many times flashing this rom but when I get to the bootloader screen which shows:
HERM200
IPL-1.03
HERM200
SPL-1.40.Olipro
The ROM program in PC stop for a long time and then shows the error msg:
Cannot connect to your PDA Phone, check your USB connection... Then when I soft reset the phone, the previous ROM still works.
But the USB connection is OK and I've flashed many other roms successfully.
Could anyone help me because I badly need to flash the original X01HT ROM.
P/S: My phone is CID, not Super CID. I use the SSPL to have the ability of flashing rom into it.
Extract the NBH from this rom and use CustomRUU, force SSPL if you want to overwrite the bootloader too, otherwise flash it directly with HardSPL.
Thank you for your advice. I have flashed many roms into my X01HT and now just want to make it original so that I can claim warranty at Softbank. Do you think it's OK?
By the way I don't know how to extract the NBH file from this ROM. The ROM is only a EXE file. Could you please tell me more detail.
Thank you
@LongmanVN: use winrar to extract the contents from the exe.
Thank you, it works now!
extract the NBH?
And then??? If I duoble click NBH my pc does not recognize it as a program.
I unzipped everything in a folder and now???
What is the next step?
Someone can help?
Hi @ll..
i have an XDA neo, and would like to upgrade to PDAVIET 4.0.0.6 touch.. but i think, i have to unlock the CID first??
At first i would save the actually rom first (is a G4 Model, WM5) with the "rd2sd all" command, but it would not work
Theres an error, who says that i don´t have the permission to get the rom..
so i think it´s CID Locked..
But i found this--> click here
would this eventually work to unlock CID??
thanxx 2 @ll
you dont need to cid unlock!
next ... free cid unlock work only with prophet g3 versions ... if you have g4 ... no way to unlock without payment!!!
please read wiki for ... what is G3 or G4 and how to flash wm6 without cid unlock!!
the roms have firmware uploader they work with cid locked device
You just need to use NO VENDOR ID locked ROM's. If it got NVID in it's name then you can safely use it. No problem at all.
OK.. thanxx..
bytheway.. what about the PDA Viet 4.0.0.6 touch??
can i use it without CID unlocked??
what happens, if i try to flash a rom, that need to be CID unlocked?
And how can i save my rom now?? because if something "**** happens", i can back it up..
but i don´t get the rom of XDA neo WM5 with
ipl 2.15.0001
spl 2.15.0001
gsm 02.19.21
os 2.15.4.29
or can i get it from here?? someone have this rom?
I also have a XDA Neo and after you flash 4.0000000.6 and so on you can still flash the official o2 ROM from de.o2.com without any problem. Just follow the PDAViet steps and you´ll be safe.
WOW COOL
thanxx...
i will try it at weekend ;-)
thanxx
NetrunnerAT said:
the roms have firmware uploader they work with cid locked device
Click to expand...
Click to collapse
But he (just like me) was looking for a way to backup his current rom, which was not possible because of a security message.
but i thinks this not a problem.. NOW..
because i know now, that is can flash is back with the originial firmware from o2.. thanxx
StevenK said:
But he (just like me) was looking for a way to backup his current rom, which was not possible because of a security message.
Click to expand...
Click to collapse
www.imei-check.co.uk if you have a G4
only g3 is free to unlock in the moment!
NiteSpeed said:
You just need to use NO VENDOR ID locked ROM's. If it got NVID in it's name then you can safely use it. No problem at all.
Click to expand...
Click to collapse
So if I upgrade to PDAVIET's 4.0.0.6 and I want to downgrade again, I follow the steps outlined in the wiki page under "WM6>WM5"
http://forum.xda-developers.com/showpost.php?p=1296235&postcount=1
If I cant find the original rom that my phone comes with (2.15.13.27 WWE), can I use this one from the wiki??
Location RUU_Prophet_220734_2207114_024721_?QtekWWE_Ship) http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html
the above rom does not say NVID. Would installing this EXE package screw up my phone if it is NOT CID unlocked??
TIA
Made NBF & flash any rom to Prophet.
http://rapidshare.com/files/72360239/jumpspl.rar
Prislav said:
Made NBF & flash any rom to Prophet.
http://rapidshare.com/files/72360239/jumpspl.rar
Click to expand...
Click to collapse
please give more info and some instructions
unzip G3 or G4 files into device root. Run SPL.lnk & press camera button. Whitescreen - bootloader. Flash your favorite rom )))
progressbar on device not show, whitescreen it's norm
PS: no more step 1, no more pdocwrite.exe.
Prislav said:
Made NBF & flash any rom to Prophet.
http://rapidshare.com/files/72360239/jumpspl.rar
Click to expand...
Click to collapse
Do you mean we can flash the prophet without using NVID ROM (STEP 1 for upgrading ) ??
SO we can directly flash Our prophet to WM6 without first step ?
Please advise
Thanks
YES!!! It's patched SPL 2.20
Very good!
Anyone tried this?
I'll save up some time if it works.
but we'll lost our original bootloader.. don't we?
no, it's soft not hard spl
I used this method last week to flash a Wizard and I must say that is quite easy and indeed you do not have to flash back to WM5 before upgrading.
See also: http://forum.xda-developers.com/showthread.php?t=329147
I have IPL/SPL 3.08 is it possible to downgrade forever to 2.20 without the risk of bricking the device?
This SSPL use jumpspl - http://forum.xda-developers.com/showthread.php?t=334667&highlight=jumpspl
Prislav said:
This SSPL use jumpspl.
Click to expand...
Click to collapse
thanx, but i dont want to loose/change my spl from 2.15.0001
can u patch spl 2.15.0001 for the same job?
So it flashes our prophet, and changes the spl... OKay
Is it possible to go back just in case??
I guess then i will have to flash doing the normal procedure right? I didn't understand what was that thing about spl.ink and cammera button, did you mean to do it to get bootloader? sorry 4too many questions
this is the biggest revolution since wm6 THANKS DUDE!
Prislav said:
This SSPL use jumpspl - http://forum.xda-developers.com/showthread.php?t=334667&highlight=jumpspl
Click to expand...
Click to collapse
im sorry but is this the answer to my question in particular?
Hello all
This is Soft SPL, then u use it, they not writes to DOC.
JumpSPL just copy spl.nb into RAM and switch to entry point in RAM of this SPL. U don't overrite your curent SPL. This gives your abillity for flashing free without CID checks.
pls help
Hy ewerybody could someboy help me? I have a g4 cid lock xda neo, the original rom was with 2.15 spl and i updated with an other one to 2.20 an i cant back my orignal rom, with this aplikation can i back the original rom and my original bootloader without changing the spl?
Works
I was try the tool and works in my lock G4.
only two questions, please.
have you plans to make a harspl?
and, what's version of spl? is 2.20?
Thanks a lot.
Sorry for my bad english
spl
thanx an answer, i want jut my old o2 bootloader back, i'm friendly with spl 2.20
(i need the bootloader because i have to bring my xda neo back to the service)
so will work this?
krobi227 said:
thanx an answer, i want jut my old o2 bootloader back, i'm friendly with spl 2.20
(i need the bootloader because i have to bring my xda neo back to the service)
so will work this?
Click to expand...
Click to collapse
but i think it doesn't help.. They are going to charge you anyway..But a try is worthfull..
I wanted to send back my Touch Pro to htc.
I flashed original German ROM from here: http://forum.xda-developers.com/showthread.php?t=427507 (HTC GER 1.90.407.4)
Than I flashed original HTC radio rom
and than original SPL from here: http://forum.xda-developers.com/showthread.php?t=410150
And now I have a BIG problem: My TP hangig on TOUCH Pro screen, in the right coner is:
R 1.02.25.19
G 52.33.25.17U
D 1.90.00.00
I can't flash nothing!!! HardSpl don't work NOTHING
PLEASE HELP ME!
Pls try this
-Remove ur battery, then put it back after ~3 secs > turn on ur device.
-If ur device can boot normally, then it is Ok. > proceed as usual.
-If it doesnt, press vol down + reset to enter bootloader.
-Flash stock ROM.
-After finish, sync ur device, run SSPL on ur device
-Flash stock SPL.
I can't flash nothing! I tried allready everything
nothing helps
I allready flashed original rom and stock SPL. And now I can not flash hardspl back, so I can't flash any ROMs
If u hv successfully restored original SPL, then flashing original stock ROM should be OK. Dont use the reconstructed one.
go to bootloader, see if you have the hardspl or the stock spl
if you have the stock spl, just send it back htc as "malfunctioned unit"
theclueless said:
go to bootloader, see if you have the hardspl or the stock spl
if you have the stock spl, just send it back htc as "malfunctioned unit"
Click to expand...
Click to collapse
under bootloader is SPL 1.90.0000 I guess its stock SPL? so I can now send it back?
another question, why I can't flash HardSPL 1.90.Olinex back?
hang.tuah said:
If u hv successfully restored original SPL, then flashing original stock ROM should be OK. Dont use the reconstructed one.
Click to expand...
Click to collapse
do you have original Htc german rom?
P.S. Big thank to all here who helps!!!
yaqxsw said:
under bootloader is SPL 1.90.0000 I guess its stock SPL? so I can now send it back?
another question, why I can't flash HardSPL 1.90.Olinex back?
Click to expand...
Click to collapse
yep, thats the original SPL
HardSPL needs to run jump.exe from the OS, just running it from bootloader wont work
theclueless said:
yep, thats the original SPL
HardSPL needs to run jump.exe from the OS, just running it from bootloader wont work
Click to expand...
Click to collapse
so their is no way more to flash HardSPL?
Than I will send it back tomorrow.
I hope I get another one
you can flash the original ROM, see if it boots up
Can someone upload original HTC german rom?
please!!!
Did you check this http://forum.xda-developers.com/showthread.php?t=428384 thread?
The OP says it's the original German Touch Pro rom.
karloe said:
Did you check this http://forum.xda-developers.com/showthread.php?t=428384 thread?
The OP says it's the original German Touch Pro rom.
Click to expand...
Click to collapse
no it's no the original
yaqxsw said:
no it's no the original
Click to expand...
Click to collapse
Hv u checked the German ROM in wiki mate? It has *stock* on its name
hang.tuah said:
Hv u checked the German ROM in wiki mate? It has *stock* on its name
Click to expand...
Click to collapse
Sorry, maybe I am blind, but I can't find in Wiki any German stock htc roms! there is only an O2 ROM and T-mobile
Can you please post here the link.
sorry, i thought u r looking for German (O2) stock rom. so in this case, ur device is unbranded HTC right?
hang.tuah said:
sorry, i thought u r looking for German (O2) stock rom. so in this case, ur device is unbranded HTC right?
Click to expand...
Click to collapse
Yes it's unbrandet HTC
P.S. Thanks a lot for your help
Hello,
i have same problem like yaqxsw :-(
1. I have flashed the Hard-SPL
2. I have flashed the HTC GER 1.90.407.4 from this thread (But the device doesn't start :-()
3. I have flashed the Stock SPL from here
(Because I read in a thread which i didn't find yet, that it could be a problem to use some ROM's with the Hard-SPL. Now I know: I never have flashed the Stock SPL if the device doesn't start.)
Now i can NOT start the device. I only can start (press volume down) the bootloader but can not flash the shiped O2 ROM from the wiki.
Is there any possibility to flash the Hard-SPL?
If i understand it correctly there is no way to start the SSPLManual.exe because it is a binary for the device (which doesn't start).
Someone knows which shipped ROM i have to flash with Stock SPL (see point 3.). When I find the correct shipped ROM I hope I can flash this ROM and start the device again.
I want to use Artemis fully and note that it requires spl 3.03 which comes with stock rom 3.14.
Problem is that that has not been released for my phone (T-Mob UK).
I can use HSPL to load 3.14 and then remove HSPL - but I got back to SPL 1.66 and not 3.03.
Does anyone have any suggestions?
Thanks
Tony
goldcard goldcard or goldcard.
samsamuel said:
goldcard goldcard or goldcard.
Click to expand...
Click to collapse
I know I am walking right into some abuse ;-) but I have to ask where there are instructions for doing "goldcard". so far I have only flashed with HSPL, SPL, CustomRUU etc
Thanks
http://forum.xda-developers.com/showthread.php?t=825397
<insert derogatory and/or sarcastic remarks regarding searching and google etc. of your choice here>
The instructions for installing are within the discussion on Artemis ROM, I followed the exact same method today, now have SPL 3.03 and fully functioning Artemis. All I will say is read, read and read before doing any of it, once it makes sense in your head it actually isn't that difficult
mb76 said:
The instructions for installing are within the discussion on Artemis ROM, I followed the exact same method today, now have SPL 3.03 and fully functioning Artemis. All I will say is read, read and read before doing any of it, once it makes sense in your head it actually isn't that difficult
Click to expand...
Click to collapse
I believe I did everything required in Artemis. My problem I believe is that there is no "official" 3.14 rom for my phone (T-Mobile UK) hence why I can't get Spl 3.03 on there.
I may ask some kind person to generate me a gold image for my phone...
But if you know how to get 3.14 on with spl 3.03 that would be great.
Thanks
Tony
TonyOCL said:
I believe I did everything required in Artemis. My problem I believe is that there is no "official" 3.14 rom for my phone (T-Mobile UK) hence why I can't get Spl 3.03 on there.
I may ask some kind person to generate me a gold image for my phone...
But if you know how to get 3.14 on with spl 3.03 that would be great.
Thanks
Tony
Click to expand...
Click to collapse
This info can/will help you.
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
kurt-willems said:
This info can/will help you.
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
Click to expand...
Click to collapse
I followed the process and indeed have a
9E000000400000000000020002000000
SD card,
But the zip file in the link is corrupt :-(
Could someone generate a new image file for me
pretty please ;-)
Thanks in advance
Tony
TonyOCL said:
I followed the process and indeed have a
9E000000400000000000020002000000
SD card,
But the zip file in the link is corrupt :-(
Could someone generate a new image file for me
pretty please ;-)
Thanks in advance
Tony
Click to expand...
Click to collapse
Like mentioned at the post I send you lastly; there you can see/reed that you can contact oliverweidel if you need some new image file.