Hi guys,
I've been building my rom for the niki, but encountered problems when reverting back to stock t-mobile rom.
The case is:
flashing the t-mo rom worked well but when hes finished, the device restarts and stucks on the t-mobile splashscreen.
With other devices i knew how to recover by getting into bootloader but with the niki i cant get into bootloader anymore.
Has someone encountered the same problems?
gr. bram
Whoops solved, thread can be closed
gr. bram
How did you solve it? I'm trying to build my custom ROM (it's for a KAISER device, but i gues it doesn't matter so much at this time). I managed to build the NBH, the flashing process finishes without any error, but the device never passes the boot screen.
NOTE: I tried to build an OS only NBH and OS + Radio. When i flashed the OS+Radio ROM the boot screen displayed my radio version, so i'm guessing the flashing process is ok, but there is something wrong with my OS.
IMPORTANT: I did not include any OEM package (or any other package). For the sake of testing i just tried to rebuild an official WM 6.1 HTC ROM.
Thank you.
This are two different Problems!
You use the wrong XIP! The fastest way to fix, is to flash a Original NIKI OS with all items and possible you need MTTY and boot command!
At this moment i finally managed to rebuild the original HTC ROM (I used a KAISER designed ROM but i'm asking in this forum since this is the place i found some reference to the error i was getting).
I followed these steps:
1. NBHExtract RUU_signed.nbh
2. NBSplit -kaiser 03_OS.nb
3. ImgFSFromNB 03_OS.nb.payload imgfs-old.bin
3.1. ren 03_OS.nb.payload 03_OS-old.nb.payload
4. ImgFSToDump imgfs-old.bin
5. ImgFSFromDump imgfs-old.bin imgfs-new.bin
6. ImgFSToNB imfs-new.bin 03_OS-old.nb.payload 03_OS-new.nb.payload
7. NBMerge -kaiser 03_OS-new.nb
8. htcrt -> select 03_OS-new.nb -> Build
9. Rainbow screen (Power+Camera+Reset) on mobile device
10. KaiserCustomRUU
11. All done!
Now the real question is: how can i change a dll from dump directory, before step 5 (imgfsfromdump).
The problem is that there is an updated DLL i would like to include in the original ROM. I see the folder mylibrary.dll inside the dump directory. This folder contains the old dll along with imageinfo.bin imageinfo.txt and a couple of sXXX files (s000, s001, s002, s003, s004, s005). I suppose that replacing mylibrary.dll with mylibrary.dll (updated version) won't do the trick.
Any info will be highly appreciated!
Related
All I wanted to do was write to the write protected extended rom and that’s where my problems started!!!
I followed the procudure in the
http://forum.xda-developers.com/viewtopic.php?t=6470 forum
I down loaded a file from
http://www.c1au.com/iMatePDAROMS/ruu15283.zip
when unzipped it produced a file Ruu15283wwe_cdl which I ran.......(ok I know that it was a mistake.. yes I know I have made the classic newbie mistake)
It would appear to be an I-Mate updater and has updated my O2 Xda2 to an I-Mate. With the following
R 1.06.01
G 1337.16
D 1.52.00wwe
Now part of the reason I was able to install the new Radio Stack, New OS? and New Extended rom was because it was all in an .exe file which automatically did it.
What I would like to do now is return to the original O2 set up and forget trying to write to the extended rom.
I am a newbie and I have been silly, please can someone help me?
It seems that I can change the extended rom, which I have now back to my original Rom, which I made a back up of.
However the phone part doesn’t seem to be working....hum, I can install the down loaded (from this website) O2 version now and try that.
or I can role back to the imate software now as far as I knew the 2 parts of the phone were unconnected, so in theory what I have done should have effected the phone? Is this correct?
Sorted Yeah
!!!BE SURE THAT YOU DO SOMETHING AT YOUR OWN RISK!!!
!!!FOLLOW MY INSTRUCTION FOR STEP BY STEP!!!
I want to say that Im not a real programmer, I found some way to flash CID LOCKED device and wrote only shell (with userfrendly interface) and collected some useful tools.
Special thanx to itsme for his tools (if i dont mistake...)
WARNING!!! IF YOU WILL SEE CMD WINDOW DON’T CLOSE IT!!!
WARNING!!! DON’T TOUCH YOUR PC OR DEVICE WHILE FLASHING!!!
With this tool and my instruction you could:
1) Get info about ROM
2) Extract only OS from whole nk.nbf
3) Flash this OS to your G3/G4 CID LOCKED Device (even wm6 rom or latest aku 3.3 rom).
In atachment there are:
1) ShellTool.doc - instruction. Read first and please, follow it step by step!!!
2) ShellTool.exe with some other files that it need
3) Cert_SPCS.cab/EnableRapi.cab - should be installed on your device
I tryed to flash diffrent rom to g4 CID LOCKED DEVICE and its were flashed on it and worked perfect. Have fun
_________________________________________________________________________________
If your device doen't boot after flash procedure with my shelltool you should
1) Hold "Camera" while short pressing the "reset" button. Your device will enter in bootloader mode. You will se 3 stripes.
2) You should connect your usb cable to your device and pc and run RUU and flash this rom. ftp://xda:[email protected]/Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar
3) read my instruction once more and repeat all step by step. its very important!!
_________________________________________________________________________________
ChangeLog:
1) Several bugs were fixed. Now you can flash OS from every rom you want
http://rapidshare.com/files/53678765/ShellTool_bugfixed.rar.html
Uploaded it to XDA developers:
ftp://xda:[email protected]/Uploads/WIZARD/Unlocking/img-27361-ShellTool.rar
Great job! gonna test it soon.. Does it also install extended ROM's on G4 devices?
Yeahhh it's workinggg, great job, now i've wm6 in my g4 locked device, hehehe you're the best... thanks
@neonkoala
Thanx
speedfight said:
Does it also install extended ROM's on G4 devices?
Click to expand...
Click to collapse
No, now it can install only OS. I think i include this (extrom writing) feature in next release
2all
found some problem with old rom (try to unpack molski 2.26 rom). My tools can't extract it correctly. So be careful. Ill fixed this bug tommorow...now need to sleep..)
Great job! Think you've made many people very happy!
working fine over here now runing wm6 pdaviet4 and loving it
Still can't believe that!
Couldn't flash G4 CID-locked with "Faria 3.3 v2". The utility just doesn't flash it.
Flashing now with Orwell's WM6... let's see what we get
Yep! Worked that perfectly to me! No need to CID-unlock the Wizard
Great job mun_rus!
Well done! Works great! Just installed Orwell's 1984 flawlessly. Just have to search around to figure out the MMS and Camera bugs. Thanks!!!
i tried installing wm6 pdaviet4...but now it is stopped at the screen with ipl spl
IPL 2.21.0001
SPL 2.21.0001
GSM 02.07.10
OS 10.1.0.011
no itsutils errors...nothing wrong while flashing...
EDIT: Now works. Entered in bootloader...flashed back old rom...e tried again.
Probably my error was a notification that poped up while flashing
I cant seem to flash any sort of rom. Ive tryed to flash aku 3.3 farias v2, doesnt work, molskis aku 3.2 doesnt work. I dont want to flash wm6 because i havent got a version that i want to flash it with. What am i doing wrong? I followed the instructions and when i go to flash the device, it goes pretty much instanly to
-------------------------------------Log Window-----------------------------------
Extracting OS...
Please wait...
Done!
********************
!!! Please make sure that: !!!
!!! You enabled the RAPI (setuped EnableRAPI.cab and rebooted)
!!! You connected your Wizard to the PC with USB ActiveSync connection
***Please, dont touch your device or PC while flashing***
***Because you may abort this operation!!! Dont do that!!!***
***You will get the message when your device will be flashed!!!***
********************
***Press OK to start***
********************
----!!!This process takes more tnan 15 minutes!!!----
[12:11:48.62] Write ROM 80040000-extension ro.nb Start
Do not disconnect the Wizard during the process
********************
[12:11:50.89] Write ROM 80040000-extension ro.nb End
********************
I would really like aku 3.3/3.2
Is there some where maybe i can get an untouched 3.3 rom that might help?
it does work... you saved me 30€
tnx mate
chriskaragiannis said:
I cant seem to flash any sort of rom. Ive tryed to flash aku 3.3 farias v2, doesnt work, molskis aku 3.2 doesnt work. I dont want to flash wm6 because i havent got a version that i want to flash it with. What am i doing wrong? I followed the instructions and when i go to flash the device, it goes pretty much instanly to
-------------------------------------Log Window-----------------------------------
....
I would really like aku 3.3/3.2
Is there some where maybe i can get an untouched 3.3 rom that might help?
Click to expand...
Click to collapse
try to use new version of my tool
mun_rus said:
try to use new version of my tool
Click to expand...
Click to collapse
I can't download
Upload it once more to xda
thabks
Thanks a lot Mun_rus for the tool! it work great
just upfrade to molski 's aku 3.rom
souvath
ps where can i download your aku 3.5
thank u
this program work perfectly and i think thats amazingly achievement and it made my day so happy!!!
Thanks!!!
Many thanks to mun_rus, the tool works perfect, upgraded ROM to Faria's AKU3.3.
This thread should be No1 in G4 !!!!!!!!!!!!!!!!!!!!
link is dead
hi guys ftp link is not working anymore.where can I download shelltools?thanks for help
It works well.
What I understand is this thing flash the system rom part while runing the OS instead of putting the device in a flash mode.
Btw, I was used to work with a virutal machine (emulated XP becaause of Vista) and I wasn't able to flash correctly.
Each time, it wouldn't go to the end of the process.
Ok, can anyone tell me what I did wrong?
I extracted a htc rom, put a new opera wwe and opera _409 folder from another rom in (in the oem folder)
and I did "follow the on screen instructions"
But at a number of times, it just ran a utility and told me nothing about what to do with it.
I then flashed it, and sh*t myself when i noticed during the flash that the rom was only 70MB.
Thank god for HardSPL.
What did i likely do that resulted in the bad rom?
I've looked for a tutorial, but cannot find one that covers the tools / windows in the raphael kitchen build process.
Any help would be appreciated.
Edit: I used the new buildOS+package tool, not the old BuildOS as that one had a problem with duplicate provxml files I think.
Nevermind, worked it out...
Thanks anyhoo
Hi everybody,
Well yesterday i figured out that i could update my rom.
I started to look the Arthemis thread to find out what's new.
I saw SSPL and the 3.14 rom.
I downloaded the 3.14 rom and i installed it.After that i took the SSPL and the Arthemis V42 Rom and tried to install it. No success.
After that i took the energy rom to install it and it works but i still have the 3.14 rom display instead of the energy rom.
So right now i'm a little bit stuck cause i don't know what to do
Here's my specs:
SPL-2.08.HSPL 8G XE
Systeme version : 5.2.21684 (21684.5.3.10)
Manila version : 2.5.20191914.0
Rom version: 09 November 2010 FRE
Radio Version: 2.12.50.02_2
Protocol Version : 15.40.50.07U
So i'm asking you guys a little help please to put energy or new arthemis back in my phone.
Thanks for your help
Ps: ( I need help on how to put my phone back to normal i'm a little confused about SSPL and the 3.14 rom :s )
run Task29
! Read Edit 2 down below first !
Well, you could try to run Task29. That will purge your ROM and leaves it nice and perfectly clean for another ROM without the risk of residua in the memory.
You can find it here:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
You will need to install a radio ROM after that, too. But having the memory wiped clean this way between installs is a good way to avoid trouble.
ThoroSOE
Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh. Copy that to your freshly formattet memory card and bring up your phone to the bootloader screen (power up with volume down pressed). It will then prompt to install the original ROM. This will overwrite HSPL and any ROM and Radio ROM you installed.
Edit 2: It could be that with ROM 3.14 the SPL is too new for HSPL! Mind that it just supports specific SPL versions! Check that! I think 3.14 has an 3.XX SPL version.
Before I could install HSPL properly I had to downgrade my ROM with an older original one to get the proper SPL (see Edit 1).
Thanks i try it now ill let you know.
Sir you don't need to look fare for your problem.
The problem is that stock ROM 3.14 isn't compatible with HSPL!!
And about Artemis ROM; I suggest you to take your time and read the "How to install?" At the Artemis ROM.
If you did it; you was ale to see you need to remove HSPL before install stock ROM 3.14!
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
OcmyHtc said:
thanks kurt-willems for answering me.
Can you tell me hat i need to do step by step please ?
I will really appreciate.
Thanks for help guys.
Click to expand...
Click to collapse
Sir I don't see how I can write a better step by step guide on how to do it.
I will suggest you to read these post's.
If you have a unbranded device:
http://forum.xda-developers.com/showpost.php?p=8776196&postcount=26465
Ore this in case you have a branded device:
http://forum.xda-developers.com/showpost.php?p=8945325&postcount=28077
PS; if you have random questions, follow the link at my signature "Q&A: How? Where? what? Ideas? [New Users?]"
And if your have other questions, just ask. but it is important to read and follow the institutions.
Thanks again kurt-willems for your answer.
So after reading the entire post on how to flash arthemis rom i did all the steps but i am stuck at the step 7
7. Run SSPL_RUU.exe with Artemis v40 RUU_Signed_0409.nbh in the same folder - YOU HAVE TO BE ON HOME SCREEN, NOT BOOTLOADER (this took me 3 tries until succeded - yes - nerve wrecking, but works). If it doesn't work (hangs on black screen for more than 2min or stays at 0%) remove the battery and try again. If still doesn't work - try solutions in NOTE below.
I did all as it is explained in the thread my SSPL is good etc but when i launch SSPL + arthemis nbh, i got into the bootloader.
I tried like 5 times and i start to be angry.
So if you can help me it would be great.
Thanks
Ok i dont have nerves to do it again, can you guys just simply explain me how to uninstall SPL 3.03 and just install HSPL 2 and put a simple rom cause right now my phone don't work because of that.
Thanks you guys for reading me.
If you will install Artemis ROM I suggest you to use v42.0!
I/we know that flashing over SSPL isn't alway's easy (it will not start alway's)
but some important things to know is to deactivate your Anti-Virus; and creating a file with only the rom.nbh and SSPL_RUU in it nothing els!
(PS; Artemis ROM v42.0 starts better than previous v41.0 (own experience))
But if you will return to previous settings;
Reinstall a previous stock ROM ex 1.66 ore 1.47 (depending of you're aria)
Reinstall HSPL use HSPL3_RUN.exe fore this.
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
OcmyHtc said:
Thank you kurt willems for your time.
So after reading a lot of things , i did everything but im still stuck at the installation of the arthemis rom.
I got a message in the phone saying: This program is trying to acces to your phone etccc... Bootloader.exe. And if i say YES then the program launch bootloader and the installation fails. If i say NO then the program stops.
I'm downloading right now the version 42 of arthemis and i will give it a try.
If its doesnt working then i'll rollback to my previous rom.
Thanks again for your time.
Click to expand...
Click to collapse
I know this event sir, I have guide lot of users in this part. When you are on the bootlouder screen and at the bottom there is no mention of "usb" the installation will fail.
Its very important to be sure that your device is connect (control it in Active sync), Anti-Virus is turn off, the folder have only the rom.nbh and the SSPL_RUN (nothing more) in it, changing from USB port if you can.
And don't double click on SSPL_RUU fore run, but left click on it and select run ass administrator.
Lately I guide a other user on this and it have takes him 5 tray's
Ow, to be sure you have a good SSPL_RUU version takes mine: Download
Thanks but right now i just want one thing.. My phone to work.
I downloaded V42 and still the same problem.
I downloaded stock rom V1.93 from orange and i can't install it , don't ask me why.
So right now basically my phone is on the stock 3.14 rom and i don't know what to do to put an old rom and to flash to a energy rom with HSPL 3.
Seriously this all thing start to piss me off , no offence guys you making good stuff but sometimes its just to risky to flash.
I followed all the steps one by one and right now i got a useless phone in my hands.
I'm searching a way to get an old rom to be installed and desinstall SSPL.
If you can help me it would be great , im still searching.
You can flash a older stock ROM over SD.
Read my first post. There you can read how to reset to stock (Edit 1). Use an older stock ROM for a proper SPL that works with HSPL.
Install HSPL as instructed in the "how to flash everything" thread.
Run Task29 (see my first post)
Install Radio ROM with x.50.x in it from desktop via Active Sync (you need a Custom_RUU.nbh and the desired Radio ROM).
Install the main ROM you like, f.e. Energy ROM (that's what I use) normally from destop via Active Sync (Energy is one package that works like an official update).
Never had any problems with this way, never needed more than one try.
Hey ThoroSOE i rode Edit 1 and Edit 2.
I hope its not that much to ask but, could you give me a WWE rom like you said in Edit 1 to put it in the SD card ?
It would be really appreciated.
I'm downloading right now a official orange rom (1.66) but i tried installing the 1.43 and it didnt worked, thats why i'm asking you the question for a WWE rom to accomplish what u told me on Edit 1.
Thanks you guys for helping me.
Ok i'm trying this right now Edit 1: To reset your phone to normal (SPL, too) just download an original ROM and unpack the file with something like 7zip. Take the largest file (easy to spot) and rename it to LEOIMG.nbh
With the 1.66 official rom.
I will let you know.
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly? It must be FAT 32, 4092K - and better not be done with quick formatting.
OcmyHtc said:
Ok so i tried to do what u told me on edit 1.
I enter in bootloader and what i get is a nice :
Loading ...
Then
00028002
Not Allow
Can someone can tell me how to uninstall SSPL >?
Cause i really start to go crazy
Click to expand...
Click to collapse
kurt-willems said:
SSPL isn't install on your device! so there is no need to remove it.
Did you tray to install stock ROM over SD!?
Witch are your errors you get?
Click to expand...
Click to collapse
As you can see in my post i already tried to install threw SD card.
When i enter in bootloader (vol down + boot the phone)
I have:
PB81100 HX BC
SPL- 3.03.0000 XE
So i have SSPL in my device.
ThoroSOE said:
Hmmm. Installing an official ROM from SD card shouldn't be a problem. If you have a branded device you should install an official ROM that matches your provider and area. For later purposes like installing HSPL it doesn't matter how old it is - as long as it is not too NEW ;-)
I have the orange operator in france.I took the version 1.66 put it into the sd card like you said.
When i pressed Vol down + boot to go into bootloader i get the error message:
00028002
Not Allow
That way of installing a ROM (via SD card) ist kind of the brute way. As long as you use a ROM matching your provider and/or area it should overwrite ANYTHING in your phone memory...
When I unsintalled HSPL for the first time that way my HD2 aborted the update in midprocess but restarted updating automatically. After that it went through without problems; I didn't have to do anything.
I used the official 1.66 ROM from the HTC support page (unlocked device).
IMPORTANT: Did you name the ROM file for the SD card LEOIMG.nbh - YES
in all capital letters? As I understand it, the bootloader is case sensitive. So it must be LEOIMG and not leoimg. Also did you format your SD card properly?
I format my SD card by the format option on the HTC leo.So i don't know if it's the good way to do it ?
It must be FAT 32, 4092K - and better not be done with quick formatting.
Click to expand...
Click to collapse
Please guys help me out i really don't know what do to anymore..
Hi all,
I tried to flash my HTC HD2. During flashing we ha a power surge. No the screen looks like in the attached picture.
What can I do?
Thanks for help.
highchain
Did you try and flash again.....??
If your still getting bootloader then you should be ok.
Hi,
I tried flashing via SDCard which doesn't work. Flashing with a stock rom or custom rom doesn't work. I always get the message:
ERROR [266]: The update utility cannot get the response from your PDA Phone.....
ROMs tried: Artemis v550 with SSPL_RUU
TMO stock rom: HTC HD2_RUU_Leo_HTC_GER_1.66.407.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship and ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship
Cheers highchain
highchain said:
Hi,
I tried flashing via SDCard which doesn't work. Flashing with a stock rom or custom rom doesn't work. I always get the message:
ERROR [266]: The update utility cannot get the response from your PDA Phone.....
ROMs tried: Artemis v550 with SSPL_RUU
TMO stock rom: HTC HD2_RUU_Leo_HTC_GER_1.66.407.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship and ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship
Cheers highchain
Click to expand...
Click to collapse
I don't see HSPL on that bootloader screen. Try extracting the .nbh file from the shipped ROM and putting THAT on your sdcard. When you execute the .exe you download, it puts a copy of all the files (including the .nbh) in the same directory; these will be deleted later, but you can simply copy it to another location while the updater is working.
Hi,
any idea what I could do/try?
Thanks,
highchain
So I take one off the nbh put them on the SDcard and boot?
I will give it a try
highchain
Hi,
I tried the 1.66 rom. It says after reboot loading than grey 00028002 on top and not allowed below. That I goes into tri color screen
Any suggestions?
highcain
highchain said:
Hi,
I tried the 1.66 rom. It says after reboot loading than grey 00028002 on top and not allowed below. That I goes into tri color screen
Any suggestions?
highcain
Click to expand...
Click to collapse
Can you put HSPL4 on the device?
Found on another thread
http://forum.xda-developers.com/showthread.php?t=927000
This person had that error message, but it was caused by his using the wrong "stock" ROM.
I tried the one which was on there. It was the latest dutty. Grey screen loading, but nothing happens.
I put only the nbh on the SD renamed to LEOIMG.nbh
Any more hints?
Cheers,
highchain
Are you sure you tried to flash the original, "native" stock ROM via SD card?
The picture you attached to the first posting clearly showed SPL 1.42.0000, means, you could not flash any custom or non-"native"-ROM to your device. Even if, flashing an "official" factory ROM via SD card deletes HSPL.
Maybe you try again from scratch?
Download HSPL4.exe, install SPL version 2.08.HSPL (not 2.08.0000) on your device, try again to flash Dutty´s ROM.
Hy
I have the same problem, but the HSPL/2/3/4 doesn't work, in writes connection error, but the bootloader writes USB - in the white part of the screen.
Hi,
problem fixed!
I used "ruu_leo_s_tmo_de_3.14.111.1_radio_15.42.50.11u_2.15.50.14_leo_s_ship", extracted this with winrar, put the nbh on my sdcard, renamed it to LEOIMG.nbh and rebooted. Started right away and is workin gperfect again.
thanks for all your patience and advises,
highchain