Can someone post the correct steps for flashing the ROM and Radio, with everything from unlocking? I looked here and PPC fourms and the directions are different on both.
Thanks!
**reply deleted** wrong version
Related
Can someone please provide the HOW-TO restore back to the original Radio Version, original Locker or unlocker and original software available at HTC. (The files would be enough and a brief walkthrough) - I was able to change to 2.2.61 and it works fine but I am going to sell to someone and want them to have the original ROM so no issues will arise. Thanks for all your help!!
No Takers?
No suggestions?
a little more info please
Need to know what carrier your unit is for. If Sprint then it is pretty easy, but Verizon will require a little care as the files are not on the utstar page and the ones I have for it are untested as I have not tried the rollback.
so if we go to custom rom/radio with an unlocker all we have to do is reflash the sprint rom if we are on sprint?
maskedlion said:
so if we go to custom rom/radio with an unlocker all we have to do is reflash the sprint rom if we are on sprint?
Click to expand...
Click to collapse
Yes.. the Sprint ROM's available are complete ROM's with IPL, SPL, Radio, OS, ExtRom, etc. The Verizon ROM's are not available anywhere! Someone over at PPCGeeks claimed to be a Verizon Tech and said even they didn't have the software (which contradicts a user report where they say they walked into Verizon and walked out with a newly flashed XV6800). The available Verizon ROM's namely VZW_2.09_RUU_Signed.NBH is an OS only ROM. It's even got a CID of SPCS_100 which is wrong. IIRC Verizon has a CID of VZW__001.
Anyway, I bricked a XV6800 the other day because I didn't downgrade the radio before running TitanRelocker. The bootloader would not accept any NBH's except the Sprint ship ROM which of course would not load because the Vendor ID didn't match. If you have an XV6800 you should be a little more careful with updating the ROM's since we do not have an easy rollback method like Sprint users do!
Sprint!
Figured it out! Thanks it was a Sprint - Now I feel more comfortable trying different rom's out there...
could someone please point me to a thread that explains how to upgrade the stock 6800 for verizon to one that support rev a and internal gps that is reliable...i know i need dcd something probably and the sprint newer radio but am unsure of correct procedure and order thanks....just want to do it once...
hey
i believe i follow the thread below but am not sure of which order...thanks
http://forum.ppcgeeks.com/showthread.php?t=17667
thanks and info
thanks...i had to follow a slightly diff procedure for verizon...had to run 2.40 unlocker first...then sprint upgrade to latest official without customization...then latest dcd...then call verizon to activate...then turn on gps in phone settings...but works great...thanks...
Hello, I just flashed my Fuze with natf rom (which worked excellent), and now I need to return the phone back to att by mail (touch wheel doesn't work, keyboard freezes). I understand I first flash stock att rom to the phone and then put the stock spl back on it, is this correct? These are the roms I found: http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
My questions are: The stock att roms on wiki all look like they are for the UK, and I purchased mine in the United States, are these the correct versions I should load? Also, which one do I need to load onto my phone (there's four). And where do i find the spl I need?
Any help would be greatly appreciated!
(I scoured the forums, though I'm not all that sure I knew exactly what I was looking for... I'm certain this has been asked before, though I could not find a step by step guide with my specific questions answered, I sincerely apologize for asking again, but I'm at a loss...)
Hyett1 said:
Hello, I just flashed my Fuze with natf rom (which worked excellent), and now I need to return the phone back to att by mail (touch wheel doesn't work, keyboard freezes). I understand I first flash stock att rom to the phone and then put the stock spl back on it, is this correct? These are the roms I found: http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
My questions are: The stock att roms on wiki all look like they are for the UK, and I purchased mine in the United States, are these the correct versions I should load? Also, which one do I need to load onto my phone (there's four). And where do i find the spl I need?
Any help would be greatly appreciated!
(I scoured the forums, though I'm not all that sure I knew exactly what I was looking for... I'm certain this has been asked before, though I could not find a step by step guide with my specific questions answered, I sincerely apologize for asking again, but I'm at a loss...)
Click to expand...
Click to collapse
Visit blownfuze.org and scroll down to reverting back to AT&T for warranty. He has everything you need to download and instructions right there. Make sure to say thanks
I've never returned a phone to stock OS before returning. Do you think AT&T has the time or the know-how to actually check each phone for custom builds?
I just tell them the phone's display freaks out like there is a cable loose inside or something... or a key on the keyboard doesn't work.
As long as you tell them there is a hardware error, they have no choice but to return it.
hi im new to HTC HD2, i have the australian version which im guessing is the europe version, i was wondering when i try and install a rom wheather i have to change the name of the ruu_signed.nbh file, ive watched all the youtube videos i could and on some of them i have seen the named changed to LEO.... so im sort of stuck, any help would be appreciated cheers frank
only need to change name when using sd card to flash.
By 'australian version' do you mean telstra version? which isn't the euro version, but roms work the same.
1 - run hspl3
2 - choose 2.08.hspl (not 2.08.0000)
Once you have applied hspl, you dont need to do it again.
3 - flash your rom.
thanx champ, not sure if its a telstra version, ive bought an unlocked 1 from ebay, just doing all the research i can before it gets here, ive flashed fones before i had an LG Veiwty use to flash the **** out of it, ive downloaded about 6 roms im gunna go with the kumar rom 1st i think, ive got all the stuff i need HSPL ect, just wasnt sure about the rom name
Also what radio should i go with if it is a telstra version i know theres alot of choices any help appreciated cheers
Just do HSPL first. Then follow the instructions on the threads of the roms that you want to try. You'll never get lost mate. Goodluck to your flashing!
radios are hardware independant, doesnt matter which you flash UNLESS you happen to get a tmous (t mobile usa) hd2. You can tell if it is a tmous, because it says t mobile beneath the earpiece. If it DOES say t mobile there, then you need to be careful what radio you flash.
thanks guys for the respones and the encouragement, this forum is way better than some of the forums ive been on
Hi All,
I recently dug my HD2 out and flashed an Android NAND ROM, and I would like to return it to Windows Mobile for a short while.
The problem is that I can't find any working links for the standard ROM.
If I'm correct, it was 1.66 which was flashed with RUU?
Any help that anyone can give would be much appreciated.
Regards,
Chris.
There are a couple of working links in the wiki http://forum.xda-developers.com/wiki/HTC_HD2#Official_ROMs_.26_Radios
Be absolutely sure to flash the correct rom for your device ie tmobile US or EU model. Else you may brick your device.
Robbie P said:
There are a couple of working links in the wiki http://forum.xda-developers.com/wiki/HTC_HD2#Official_ROMs_.26_Radios
Be absolutely sure to flash the correct rom for your device ie tmobile US or EU model. Else you may brick your device.
Click to expand...
Click to collapse
The problem seems to have been a rubbish USB cable.
Many thanks for your advice and the link - all working now.
Chris