I don't know why, but LEFT softkey & UP button are died.
Now if i want run my PDA in boot mode (left softK + right softK + soft reset) i can't...
How can i resolve?
Is there an alternative method?
Via Software?
TIA.
Solved...
Just search in Windows resettobootloader.exe
Sorry for this thread.
I don't know why, but LEFT softkey & UP button are died.
can you see it good luck ( it hiden file yoou should total command for open it )
Related
Sorry if this has already been covered, but i couldn't find anything!
I recently updated my xda with a bad ROM and the phone would move past the spash screen.
Its possible to install a new ROM even when your phone wont start, and here's how!
Hold down the Vol Down key and press the Power button and you will see the tri-colour screen. Connect your phone via USB and check that USB is displayed on the screen, once it is you can load a new/backup rom in the normall way!
Hope this helps someone!
JKAA
do a search for ( the deffinative mtty thread ) all will be explained how to format your nand chip
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Lavundra21 said:
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Click to expand...
Click to collapse
No sir, you should be just fine, try to reflash back to stock using odin, pull the battery remove the sim and sd card, and then go into downloader mode, and try again.
stock FW here, good luck.
Lavundra21 said:
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Click to expand...
Click to collapse
Read the froyo thread you need to adb reboot
Sent from my SGH-T959 using XDA App
still cant get it to work... i dunno what im doing wrong. but it seems like all the files needed arent in the link from above.
Keep trying
Try enter "downloading mode" with the sd card in the phone(after many attempts it worked for me), there is a thread in this forum about how to enter "downloading mode" and flash the phone.
still cant get out of the android system recovery mode.. ive tried holding buttons down while turning the phone on and off and theres nothng happening. still cant use the power button as the ok.
i got the same problem i cant use any button as ok
is there a way to get the ok button, or what i can do to get over this problem
thanks in advance
Let me know if these steps help:
Here is a couple of methods to get into download mode. Once you get to
download mode, follow the directions in second part of my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up
on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on,
immediately release the power button but not the other two. Hopefully it
will boot into download mode and than you can use Odin to get back to stock.
Second Method
1) Another method that seems to work for some people is to pull the battery,
sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power
button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep
holding all 3 buttons until the vibrant disappears and reappears. Once it
reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB
REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download
How to get back to stock once in Download Mode:
Download the files in the linked thread and follow the directions there or
the ones in my post below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected.
If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that
once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two
options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
Seems to be the same issue
I just tried upgrading to 2.2 using Odin and this seems to be the same problem. It seems that every solution starts with, "Enter Into Download Mode..." but no method seems to work.
I wouldn't say the phone is "bricked" as when it is plugged into a computer it will install the drivers and Odin sees it, but I can't get it into anything but recovery mode.
The buttons seem to be strangely mapped, the up and down buttons are reversed and the power button doesn't seem to be working as the "Ok" button. The menu toggles the recovery screen and the <!> graphic with the Android. Anyone figured out how to solve this? In the meantime I will continue attempting to get into download moad.
Hi, I have the same exact problem. Stuck in system recovery. Volume buttons reversed. Power button does nothing. Cannot get into download mode. Please Help
what happened?
I just got the same issue :S
the volumes buttons are wrong and the power (OK) button is not working on system recovery mode...
any help?
same problem - samsung galaxy vibrant
brianking21 said:
Hi, I have the same exact problem. Stuck in system recovery. Volume buttons reversed. Power button does nothing. Cannot get into download mode. Please Help
Click to expand...
Click to collapse
can't mount /dev/block/mmcblk0p1
(invalid argument)
e:copya_dbdata_media:can't mount SDCARD:
your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed
Folks, any update regarding this problem. I got very same problem, and could not find a solution yet.
hints?
I have the same problem also. I got into the problem by following a thread down grading to 2e version from 3e version. I've tried lots of things including going back to stock--or what I think is stock. I now have the 3e version again but when I bring up recovery mode the up/down buttons are backwards and the ok (power) key doesn't work.
Suggestions? HELP?
We can get into root console and manually tweak files if that will help.
UPDATE----SOLUTION
I got this working by reloading the stock t-mobile kernel from http androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/. This link provided at that site is single file so just use the pda and pit boxes in odin. In desperation I selected re-partion and Phone bootloader update.
I was unable to get into the recovery console with hitting any keys but adb did the trick. Volumn-up and power gets into the flash download
Finally Fixed it
I finally was able to get the phone into download mode by holding down the volume up key, the search key and the power key.
It seems the key mapping was just messed up.
After it entered download mode I followed the guide on androidspin /2010/08/09/ how-to-restore-or-recover-your-samsung-vibrant (add the .com to androidspin, forum won't let me post links yet)
Hi How did you hold the search key. It does not light up till the vibrant shows on screen. Can you please explain how to managed to hold vol up, power and search together? thanks
Sivaavis its only a 3-button combo, not 4. Why u holding down search? Its up,down volume and power and then when the vibrant logo shows u let go of power.
Sent from my SGH-T959 using XDA Premium App
If you are in recovery mode just go into adb and type in:
adb reboot download
You should be in download mode
NEED niki100 Original vodafone Rom SPA or (ESP)
I can't find nothing
The phone is CID locked and no ROM
Tried sd update and nothing
"NIKI100"
SPL-1.16.0000
CPLD-4
marius_fl20 said:
NEED niki100 Original vodafone Rom SPA or (ESP)
I can't find nothing
The phone is CID locked and no ROM
Tried sd update and nothing
"NIKI100"
SPL-1.16.0000
CPLD-4
Click to expand...
Click to collapse
I only have a dumped version of RUU_Nike_Vodafone_ESN_1.31.164.09_Ship.exe , I'm not sure it will help you but at least you can give it a try, you can download the rom HERE
Goodluck
nop... is not working is stuck in 0%
But thanks anyway for being so fast
I was already afraid of that, can you tell me how you lost your rom ?
Greetz,
well i got it from someone (a friend )
hi said: "I wiped out something from windows folder"
after that the phone start only with vodaphone logo and stuck there.
so i tried with MTTY commands and format all "TASK 2A"(this is after 4-5 days of searching ROM's and other stuf for NIKI100) I manage to save the radio version .etc.
R 1.58.16.27
G 25.61.30.03W
D 1.31
m 04
b 04
If you know something about MTTY commands i am happy to know.
Besides this http://forum.xda-developers.com/wiki/index.php?title=Trinity_BootLoader#HTC_Trinity_BootLoader
thanks again..(sory about my english i am from Romania)
marius_fl20 said:
well i got it from someone (a friend )
hi said: "I wiped out something from windows folder"
after that the phone start only with vodaphone logo and stuck there.
so i tried with MTTY commands and format all "TASK 2A"(this is after 4-5 days of searching ROM's and other stuf for NIKI100) I manage to save the radio version .etc.
R 1.58.16.27
G 25.61.30.03W
D 1.31
m 04
b 04
If you know something about MTTY commands i am happy to know.
Besides this http://forum.xda-developers.com/wiki/index.php?title=Trinity_BootLoader#HTC_Trinity_BootLoader
thanks again..(sory about my english i am from Romania)
Click to expand...
Click to collapse
You better started HERE instead of using MTTY, it's harder to recover than to brick, most of the time people brick their device by using the command task 2a.
For now there are 2 options.
1. Perform a hardreset :
To perform a hard reset on a device that is not responding to input or not booting to Windows, first remove the back cover of the device. Hold the "call" and "end call" keys on the front of the device and reset the device by sticking the stylus into the small hole to the left side of the USB port. The device will ask for confirmation. To confirm, press the "Enter" key on the keypad. On some devices you need to press the "Action" key instead of "Enter".
The device will reboot and be reset to factory settings.
2. Try Frankenkaiser, see this post.
Succes buddy
since I got your post i am working.
The problem is the commands are only for kaiser bootloader
and i am trying to get my phone in "dload" mode like here http://forum.xda-developers.com/archive/index.php/t-394584.html
but in MTTY doesn't accep command "setboot 1"
to write the security unlock commands
it my bee a chance with this "FrankenKaiser"
ouhhh !!!!
the command are not the same for niki100(or spl 1.16.0000)(at least not all of them)
this is why i formatted my device
i was trying commands and ...opppss....ther goes my ROM
and it didn't work HARD RESET in the fist place
marius_fl20 said:
since I got your post i am working.
The problem is the commands are only for kaiser bootloader
and i am trying to get my phone in "dload" mode like here http://forum.xda-developers.com/archive/index.php/t-394584.html
but in MTTY doesn't accep command "setboot 1"
to write the security unlock commands
it my bee a chance with this "FrankenKaiser"
ouhhh !!!!
the command are not the same for niki100(or spl 1.16.0000)(at least not all of them)
this is why i formatted my device
i was trying commands and ...opppss....ther goes my ROM
Click to expand...
Click to collapse
marius_fl20 said:
and it didn't work HARD RESET in the fist place
Click to expand...
Click to collapse
I think the biggest problem is that your device wasn't unlocked before you bricked it, can you tell me what your device is doing now are is it complete dead.
Regards,
1.normal start - it vibrate and then white screen and stop here.
2.boot loader mode - pressing camera button + pwr button, no problem here.
3.hard reset - pressing send(green) button + end(red) button + pwr button
(no problem)it enter ok (this operation will delete.....)
butt after i press action key (not enter) "restore complete press
SEND to restart"
After i press send it vibrate and then white screen
marius_fl20 said:
1.normal start - it vibrate and then white screen and stop here.
2.boot loader mode - pressing camera button + pwr button, no problem here.
3.hard reset - pressing send(green) button + end(red) button + pwr button
(no problem)it enter ok (this operation will delete.....)
butt after i press action key (not enter) "restore complete press
SEND to restart"
After i press send it vibrate and then white screen
Click to expand...
Click to collapse
Ok, your phone is doing more than mine, I also had a white screen and try to flash the original rom, that didn't work so I tried the wwe 2.16 version and it started flashing but stops at 69%, now I have an Upgrade ROM code error in my bootloader, the biggest problem with your phone is that you don't have an hardspl, now I'm reading this post.
I'll keep you informed when I found something.
Regards,
I don't understand the commands from "FrankenKaiser"
For example what shoukd i type in instead of "/dev/com1"
What is my pot No (usb)
What should i see in CMD window
And what is it with "Replug USB cable now!"
Thanks for not leaving alone!
It looks like they have it (the rom)
But i can not register.
Can you give it a try .
http://www.htcspain.com/roms-touch-dual-60/roms-oficiales-5085/
please!!!!
marius_fl20 said:
It looks like they have it (the rom)
But i can not register.
Can you give it a try .
http://www.htcspain.com/roms-touch-dual-60/roms-oficiales-5085/
please!!!!
Click to expand...
Click to collapse
Ok I'll gonna give it a try and keep you informed.
Hi,
my Pipo M6 per wifi hangs itself while starting, i.e. he gets stuck with the loading picture. Indeed, with the Reset he restarts, however, gets stuck also again. After he gets stuck, he can be also switched off no more, except by Reset.
And I also do not come to the Recovery mode, I thought, maybe helps a new firmware. However, sometimes he registers if I hold the keys while starting low-spirited, that Android little manes with open belly and warning sign. see below.
If I hang him by USB on my Win7 pc, a wrong driver's file is installed constantly, either Samsung or HTC, so that the Flashtools register that no suitable device is connected. With the USB driver of Pipo the pc says that that is no suitable driver's file.
What can I do?
And over again for stupid ones: I come to the Recovery fashion, nevertheless, dur volume press ESC and power at the same time, or?
Please, can anybody help me?
Nobody can help?
Is the tablet an fall for garantie?
Anybody any idea?
Please help.
Try one of the 2 methodes
gnom68 said:
Is the tablet an fall for garantie?
Anybody any idea?
Please help.
Click to expand...
Click to collapse
A This is the easiest way: Do a HARDRESET
Recovery Mode (for Factory Reset):
-----------------------------------------------------------
1. [Reset] (on the backside)
2. [Power] + [Vol-]
3. green Android shows up
4. press [Vol-] + [Vol+] + [ESC] together till Menu shows up (if it's not showing up try to press it a few once more)
OR
B For advanced users: Flash the original Firmware (download from here it is a very slow download )
and use the howto which is delivered within the downoad.
Maybe you can find some usefull information here
Hope i could help u. For me it was working fine.....
Hello, I registered here in XDA to only ask a question.
I have a phone (Hyundai e501) that's bugged in the no command screen.
My aunt gave me the phone with the description of 'just fix it'. My guess is that the ROM is corrupted so I tried to flash a new one (if that's how it's called).
I saw a YouTube tutorial and got pretty far until it said that the phone has no space.
So my question is: how can I factory reset / format the phone without starting it? I tried to use the recovery menu but it automatically says 'No command', even when I'm not trying to get to the recovery menu.
I tried the combination of buttons that said to get to the 'No command' screen with the power and vol up button pressed and then click and unclick vol up button and it didn't work.
Is there a program that could help me? If there's not it could be a hardware issue? Thanks!