Hello,
i have install the german WM6 from http://forum.xda-developers.com/showthread.php?t=337022 by softSPL.
My device is a G4 Wizard.
i have change inadvertently one or two dll files from OS. (i know: never touch a running system, but i has open some explorer windows on my PC. One was conectet to my Wizard \Windows. i was distracted, so that i say OK and not Cancel, as the confime-question comes.)
I have also install an other Software, thats i know it's running without problems. => softreset!
now after reset the Wizard freeze on boot by the welcome-screen.
if i reset and press the camera-button i can see the screen with the thre colors red/.../... and and bottom the white bar. if i plug the USB cable, it's shows the message USB
have i a chance to restore the os? how can i do it?
thanks for help!
greetings Frank
Wizard no longer freezed on boot
My inattention get's me a sleeples night. But in the morning i started an desperate attempt to rebuild the OS.
And? => My Wizard is not longer freezed on boot! (verry happy!)
What i has doing:
0. if i will run Setup with SoftSPL from the hanging up-point, comes the Message "no device detected"
1. put out the battery and reinstated,
2. Wizard connect to USB and waiting for what heppens => jellow and green carge-LED was signaled the charging function (yeah!)
3. again put out and reinstated the battery (by connection with USB)
4. Power- and camera-Button pressed for go into the multicolored bootloder-screen => USB was reportet in the bottom white bar
5. now i wanted install the VF-ship ROM by using softSPL => Error-Message!
6. new trial: start the original install of VF-ship Rom without softSPL => Error-Message: No connection to device
7. again the steppes 3 and 4
8. now i start the original install of this official german VF-Rom: RUU_Wizard_2210301_22103102_021911_VF-DE_Ship.exe => well, connection to deviece and it's runnig setup!
After the original ROM-install the Wizard is rescued! It work's fine and stable.
So i can reinstall the german WM6.
But now watch, and no new mistakes!
greetings Frank
Related
I need to upgrade the SPL on my SPV C550 now that I have unlocked it (trying to install WM6)
Do I have to buy a mini SD card reader or can I use tools to do this from my PC.
If so which tools please and briefly how.
Cheers
John
john72821 said:
I need to upgrade the SPL on my SPV C550 now that I have unlocked it (trying to install WM6)
Do I have to buy a mini SD card reader or can I use tools to do this from my PC.
If so which tools please and briefly how.
Cheers
John
Click to expand...
Click to collapse
Although a search would solve your problem here is a mini how to:
- you need to have ParchedRUU (this includes these files: EnterBootLoader.exe, Patched_RUU.exe, ROMUpdateUtility.exe, RUUGetInfo.exe and finaly your_bootloader_name.nbf) all in the same directory. The files are availabe on the net just google it.
- establish an activesync connection with USB, to do so have the phone in standby mode (no bootloader mode)
- when connected in activesync (green icon on taskbar) run the Patched_RUU.exe
- make sure you tick the boxes and the next button and that phone battery is greater than 50%
- in the final screen hit the update button, if the .nbf is in the same directory as the Patched_RUU it will load it automatically
- wait for 3 minutes, during this time you phone will enter bootloader mode, and a red bar will show the progress on the phone and the computer
you are all done
- mike
Cheers mate that did the job.
Next I guess I get into boot loader mode and then use mmty.exe?
Any clues please on how to get into boot loader mode.
john72821 said:
Cheers mate that did the job.
Next I guess I get into boot loader mode and then use mmty.exe?
Any clues please on how to get into boot loader mode.
Click to expand...
Click to collapse
again search m8!
anw here it goes:
- go to active sync -> settngs -> disable USB connections
- switch off your phone, and while holding the camera button connect it to the USB, on the screen it will appear "Need UI upgrade? (0)" or something like that.. bottom line is press 0
- then phone enters bootloader mode. if on the lower bar i think it is the green bar it says hurricane and on the right UI then it is all good, if it says something like XIP or something then you have to switch it off and do the proccess from the begining with the camera button REMEMBER TO PRESS THE 0
- fire up the mtty.exe, remember put mtty.exe AND the bin in the C:\ directory. The only thing you need to change in the startup screen of mtty is the connection port change from com1 or something to usb and press ok
- press enter so the Cmd> shows on the blank terminal
- write without quotes "l c:\name_of_your_rom.bin" and hit enter. l is a small L short for load
- hopefully it will do the update, wait for ~10 mins and it will say that it is all done... depending on your rom you may have to change language and so...
hope this helped
- mike
Sorry to carry on a bit but I get this when I do what you suggested.
Cmd>l C:\wm6.bin
clean up the image temp buffer at 0x8C080000 Length 0x01C40000
MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Ive Googled this and im sure ive unlocked my phone - but is that the same as unlocking the super CID?
i dont remember man, are we allowed to post links to other sites? anw follow this guy's tutorial it is allmost the same
http://karhoe.byethost33.com/content/view/35/1/
- mike
help..
need to flash phone from boot loader mode..no standby mode..how do i do that???
HELP!!!!!!!!!!!
Just follow my guide in the signature, but use huricane ROM instead, you need to get into the bootloader and enable AS USB mode, then run the RUU
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
when i press the power button the fone gives the white disply and nothing else happens.
i cannot even get into bootloader.
the charging function works when the fone is turned off.
when i turn on the fone it dos nothing not even chaging.
is there any way to get my old fone back...
help plz
i shall be very thankfull to you.
DEAD SPV
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
when i press the power button the fone gives the white disply and nothing else happens.
i cannot even get into bootloader.
the charging function works when the fone is turned off.
when i turn on the fone it dos nothing not even chaging.
is there any way to get my old fone back...
help plz
i shall be very thankfull to you.
Where I can find the latest SPL for C550?
i installed a new rings rom. it worked fine, then my phone froze up, now it won load pass the opening page. it just says analyzing device component..... and its frozen there. please help, i run my company thru my phone and its very important...
what type of phone do you have? if its a G1 as i have then its easy to un-brick or un-lock...just plug your phone to your PC and format your sdcard again which will erase all of its data then ya good to go or you can remove the battery place it back then hold down your home plus power button at the same time till youir phone boots to the next screen then press alt+L then altW then reboot your phone and sign back in...
if this is a post about the g1 take it to the other forum because this is about the hermes
its a herm 100. htc 8525
have you tried to do a hard reset? If not give that a try.
I hope you installed Hard SPL V3 on it first... to check - hold power, OK button above the flywheel and reset with stylus, hold in until the tri-colour screen appears. Will show IPL - 1.04 and SPL - 2.10oli (if you've installed hard SPL V7).
If so, and you tried to Hard Reset 1st with no success, try the sd card method. If thats not working, on the pc, if using XP, go to activesync's connection settings and untick "Allow USB Connections". Connect your Hermes to the pc with usb after going to bootloader. Run the RUU_Wrapper.exe file again. This should re-install the rom.
You're gonna have a heap of trouble if you haven't Hard SPLed your Hermes.
Good Luck....
I dont have hard spl v3 on my phone. when i try to load another rom or anything i get error 270 the image file is corrupted. please check your update utility. what does that mean? and how can i work thru that?
Hi,
My Star Trek (cingular 3125), every now and then displays "Searching for SD card" message then goes to the tricolor boot loader mode. This happens randomly when,
1. Restart the phone (press the power button)
2. After complete boot, it would automatically reboot and will stay in the tricolor mode. I am sure the "Searching for SD card" message would have preceded this screen.
3. Typically occurs when I use the phone normally.
Neither the USB cable is plugged in nor a bluetooth connection is active when this happens.
Currently my device runs on Pampooh's Windows Mobile® 6.1 Standard CE OS 5.2.20282 Build 20282.1.3.6 (English Only) v1.05b ROM.
I had the same issue even when I was running earlier version of WM6.1 ROM by Erofich.
Not sure what triggered this issue. I dropped the phone lately, there is a little crack on the LCD, but the phone works just fine.
Has any one seen this before? Any idea what could be causing this?
Thank you for your comments.
JSenthil
what I'm getting when try Raphael_CDMA_HSPL_037/or relocker is "error 262 communication error" after it hangs at 0%. I'm using vista 64 and i am using the same cable and port that was used to unlock the phone flash it a second time successfully but not the third so i dont think it's the cable. If i try to load from sd card just hangs at 0%. I have tried the following:
Bell Stock ROM TP
Bell_Elite_RC1_RC1_21234_20090624
task29 Sprint v1.12.34F
Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship
Raphael_CDMA_Relocker
Raphael_CDMA_HSPL_037
They load alright get to the page where it shows my current image version, and it is blank. I pick the version to update it starts, phone and comp switch to loading screen and it stay's at 0%. After a while it now comes up with an error that say's ERROR (294) : INVALID VENDOR ID. Near the exit button just above the exit button is a code
B a3-RBRK<567-SQEVc568-RBRK<5670 if that can help in any way.
Only Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship gets to 1% before it goes into the reboot startup loop where all i see the the touch pro screen then reboots, all the others just stay at 0% with the error above .
These are just a few i have tried MightyROM4_06.20.09_Herman, task29 and others but it just wont sync up. Although it say's usb on phone and they do seem to start to sync when i first plug in the phone using the usb my mobile sync center does not recognize the phone nor can i access any of the files because it's not on my list under comp. So this is what a brick looks like.
Any ideas would be greatly appreciated
accurato said:
what I'm getting when try Raphael_CDMA_HSPL_037/or relocker is "error 262 communication error" after it hangs at 0%. I'm using vista 64 and i am using the same cable and port that was used to unlock the phone flash it a second time successfully but not the third so i dont think it's the cable. If i try to load from sd card just hangs at 0%. I have tried the following:
Bell Stock ROM TP
Bell_Elite_RC1_RC1_21234_20090624
task29 Sprint v1.12.34F
Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship
Raphael_CDMA_Relocker
Raphael_CDMA_HSPL_037
They load alright get to the page where it shows my current image version, and it is blank. I pick the version to update it starts, phone and comp switch to loading screen and it stay's at 0%. After a while it now comes up with an error that say's ERROR (294) : INVALID VENDOR ID. Near the exit button just above the exit button is a code
B a3-RBRK<567-SQEVc568-RBRK<5670 if that can help in any way.
Only Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship gets to 1% before it goes into the reboot startup loop where all i see the the touch pro screen then reboots, all the others just stay at 0% with the error above .
These are just a few i have tried MightyROM4_06.20.09_Herman, task29 and others but it just wont sync up. Although it say's usb on phone and they do seem to start to sync when i first plug in the phone using the usb my mobile sync center does not recognize the phone nor can i access any of the files because it's not on my list under comp. So this is what a brick looks like.
Any ideas would be greatly appreciated
Click to expand...
Click to collapse
You may need to reset your device. Reset (or normal) software on your device deletes all active program memory and close all active programs. This can be useful when your device is running slower than normal, or programs that are not performing well. Soft reset is required after installation of some programs. If a soft reset when the program is running, unsaved work
will be lost.
To perform a soft reset
1. Pull out the stylus.
2. Use the stylus tip to press the RESET button located at the bottom of the device. Your device restarts and go to the boot loader and reflash with an official ROM for your device !! if the problem continues try to hard reset A hardreset should only be performed if a normal reset does not solve the system
problem. After a hard reset, the device is returned to the default settings-
that way when you first bought and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile ® software and other pre-installed programs will remain.
Warning! Your device will be set back to factory default settings. Ensure that all additional installed programs and / or user data have been supported before you do a hard reset.jika problem continues try to hard reset A hard
reset should only be performed if a normal reset does not solve the system
problem. After a hard reset, the device is returned to the default settings-
that way when you first bought and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile ® software and other pre-installed programs will remain.
Important! Your device will be set back to factory default settings. Ensure that all additional installed programs and / or user data have been supported before you do a hard reset. To perform a hard reset
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen:
4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Clear Storage
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes. and try to re-Flash again !!!! I hope you succeed
I have tried the hard reset also but with no luck. I think the op system is corrupt. Even from the SD card it just hangs at 0% they all do. I am using the same comp. and cable that was used to flash it the first time with positive results. The hard reset works it loads then goes into touchpro loop on startup.
I flashed my tg01 with wp7 a long long time ago,been good until i decide to return back to wm .5 and pressed the soft reset button under my back cover.Then i turned it on and all it shows now it shows the wp7 connect to the computer sign
After that i connect the phone to the computer but heres the problem! it detects the phone (sometime it fails to install the usb driver) zune came up with a error code saying no restoration point unable to restore this device.When i open download mode(blue LED light) nothing appears on the screen.Am i screwed?do i have a chance?Help please!
No it is all OK. If you have blue LED you can go back, just leave it on usb or charger for few hours to be shure for battery then do the downgrade to wm 6.5 by Mirlog. You have link to totorial in his signature. Enjoy