I got an atom with WM6.1, and it doesn't charge when it is turned on. When it is absolutely turned off (after disconnection of a battery) it charges. Need help or any possible solutions. I have Vista, so I can't replace the firmware.
dna556 said:
I got an atom with WM6.1, and it doesn't charge when it is turned on. When it is absolutely turned off (after disconnection of a battery) it charges. Need help or any possible solutions. I have Vista, so I can't replace the firmware.
Click to expand...
Click to collapse
Do a HARD RESET and try..
pls got >1A power adapter
Related
I have upgraded my Himalaya to 1.50g and yesterday forgot to charge it and now it won’t turn on even I’ve put it in the cradle for 2 hours now. How can I fix it and prevent it from happening again? It didn’t happen to me before upgrading to WM0.5
tried reset both the normal reset and the special 2005 hardreset ?
Yes, I’ve try both. But no sign came. Only the red light gets on when I put it in cradle
Put the battery off and place it on the battery slot behind the cradle..
if still the same.. reply ASAP!
I’ve charged the battery since got your advice but it did not help also
I can not see any sign that my Himalaya is alive but the red light when connected with the power supply. With the power I’ve tried to come to bootloader mode but without success. It didn’t respond any more
I’ve just managed to wake it up one time. It comes as from hardreset. The battery indicator showed backup battery 100%, main battery 34%, but it last only about 5 minutes then come off again and the red light come back
sounds like a hardware issue with the battery
or a very very naugthy unstd sim card
Now it’s working again!
Thanks lot! I have cleaned it from inside out let the battery full charged for 1 night, managed to hardreset it, reinstalled the rom and now it’s working again
Hi,
I have an O2 XDA 1. This morning I noticed the battery was empty so I tried plugging it in to charge. The orange light does not come on and the battery does not charge no matter how long I leave it on. I have tried it both in the cradle and with an adaptor but still nothing happens. I even changed the internal battery but it is still the same.
Any ideas as to what i can do?
Dale.
i have the same problem. can anyone help me with this problem.
thanks b4.
best regard
Charge problems
Hi! i don't know will it halp you or knop. I am not a profi with pda...
but i had the same problems before.
I used car charger. next day battery was almost dead. u put usual charger. not results. u put it through cradle, the same not result.I scared. then i tryed to put car charger,then wall charger,then car charger and wall charger again and it started !!!
i guess the problem is in pda power logic <program didn't switch different power from charger and stop receive a charger in general >
may be u have this problems bc in the wall power were shortly powered down <may be shortly it jump from 220 to 200 voltage>
u can also try to put it to 220 and 120 voltage wall power.
sorry if my english is awful. hope it will help u
Hello Guys..
I've same problem with you guys..
The last day i charge my Wallaby was 2 days ago, and this morning i try to re-charge it with USB but cannot recharge, i try the cradle but it doesn't recharge too.
I think the battery was good because my O2 was powered on and running normal, just cannot re-charge.
I try to remember what i have done before... then.. i remember..
Before i try to recharge, my friend was try to connect his Universal USB Cable for his HP IPAQ (I forget the series) to my Wallaby and his PC detect and try to Synch my Wallaby but the charging indicator doesn't lite.
I Think, Maybe.. something wrong with the electricity, amphere, voltage, or whatever that comes out from his Universal USB Cable.
I have been hard reset and go to boot loader to see the Battery test, but doesn;t help..
Any body can help us??
alitkeren said:
Before i try to recharge, my friend was try to connect his Universal USB Cable for his HP IPAQ (I forget the series) to my Wallaby and his PC detect and try to Synch my Wallaby but the charging indicator doesn't lite.
Click to expand...
Click to collapse
That´s the problem. Ipaq has other Pin layout, so you have damaged something in your device. I´m giessing, that the fuse is blowen away...
Stefan
Oh my..
My Wallaby was physically broken because the shortcircuit, right?
I affraid the money i must to spend to repair will be the same like i buy it (second hand)..
Nothing i can do but go to repair shop, right?
You can try fixing it yourself. You can check if the fuse is not working any more and you can replace it, if you´re kind in soldering....
Stefan
Hello LumpiStefan,
It was a long time no see.
Still use the wallaby with ROM cooked by your ROM Cooker until now.
I just wan to give my credit to you LumpiStefan.
Cheers.
same problem here....
Wallaby charging problem
Hi guys,
I have a charging problem too. I have a wallaby. when i put it onto cradle led turns to amber and then immediately to green. Settings > Power section says the battery full of 100%. But when put off it from cradle, 1 minute later, it goes off. I changed the battery with a new one. still same problem. I also checked two fuses located on both side of the main board. They are OK. No fuses blowned.
So, don't know what to do. it actually works very well but charging problem. I don't want to throw it away. any other external charging device is OK for me.
I need your helps. Thanks.
LumpiStefan said:
You can try fixing it yourself. You can check if the fuse is not working any more and you can replace it, if you´re kind in soldering....
Stefan
Click to expand...
Click to collapse
Hello all. This is my first post.
I've used my Wallaby for many years. Yesterday it doesn't start anymore and if I put it into the cradle no light is displayed.
Last change I did was to replace my GSM SIM card with a UMTS one; since that moment it doesn't work anymore.
You were talking about fuses... Where are they located exactly ? What kind of fuse are they ? How can I check if they're blowned ?
Moreover.. I've a backup of my Wallaby... eventually is there any emulator where I can resume/restore all my contacts ?
Thanks,
Marco
Looking for replacement Wallaby
If anybody is interested, I have a few Wallabys for sale.
May be cheaper than trying to replace broken screens or paying for repairs.
Wallabys for sale
friends,
i have pdaviet 4.0.0.0.3a on my o2 neo n the weird thing is with wm6 it doesnt charge with the same charger i used to use when my o2 was using wm5?! can anyone please explain me this problem? i plug in the charger, the orange led lights up showing that it is charging, even the battery status icon changes to charging mode, but there is no charging happening or well battery status shows that the battery is dieing more than charging.. why? what to do? please please help.. do i need something else or what?
thanks a lott..
1. Did you follow the ROM flashing procedure Step 1 and Step 2 faithfully?
2. Is this charger the original charger came with the phone?
Try that one first and see. You will find not all chargers alike, especially where there are USB 1.0 and 2.0 specifications.
Or, you have taken some shorcuts to install your 4.0.0.0.3.
yesss i have.. not once but several times.. in the attempt to get my charger workingg.. but its not.. i dunno what to do.. pls help..
downgrade to wm5 and test the charger,it is simple
I have the same problem (i use PDAVIET 4.0.0.4)
I has tried with an adaptator and with connection pda->pc, but not work!
have you tried xda-dev batfix
see bottom of post
http://forum.xda-developers.com/showpost.php?p=1166781&postcount=1
seemed to help mine with the charging issue. On the other hand, maybe it wasn't that. Your mileage may vary.
There seems to be a problem with charging in WM6 with others than the original wall-charger.
When i charge at a different PC or generic USB-charger setting the device off (pressing power-button for severeal seconds) will allow charging in off-mode.
my charger used to work with wm5 properly.. with wm6 on my device, i have to rely on my laptop to charge my phone and that can be a pain in the butt sometimes.. one weird thing i noticed is if i want my wall charger to work, i first plug my o2 into laptop for few mins and then plug my wall charger into my o2 n it starts charging.. but what if i go somewhere where i dont have laptop access.. then what?! the wall charger was an idea that did not require me to rely on the laptop but in my case there is no function of wall charger without laptop..
as for the recommendations, i will try xda-battfix thingg.. thank you very very very much for all your support..
the.genuine.scholar said:
my charger used to work with wm5 properly.. with wm6 on my device, i have to rely on my laptop to charge my phone and that can be a pain in the butt sometimes.. one weird thing i noticed is if i want my wall charger to work, i first plug my o2 into laptop for few mins and then plug my wall charger into my o2 n it starts charging.. but what if i go somewhere where i dont have laptop access.. then what?! the wall charger was an idea that did not require me to rely on the laptop but in my case there is no function of wall charger without laptop..
as for the recommendations, i will try xda-battfix thingg.. thank you very very very much for all your support..
Click to expand...
Click to collapse
I have same problem with the latest PDAVIET 4.0.0.0.5 .... I tried xda-batfix but did not solve the problem.... any solution?
Jarel
i was stuck up like this too and was't able to charge even going back to wm5 nvid rom so i found this solution:
step 1 .) format with wm5 nvid rom on wm5towm6 upgrade page
step 2.) download http://rapidshare.com/files/47536071/PV_4.0.0.0.5b_Cross.zip ,or refer to http://forum.xda-developers.com/showthread.php?t=321832 topic > ROM WM6 for Prophet
PDAViet 4.0.0.0.5b Cross (simple upgrade)
step 3.) stick to this rom for sometime like me untill i would find something new else continue experimenting and help me too but i think for now this is perfect for me i dont want cube but i have cross with touch flo and stable battery charging (its enough for me.)
I have the same/similar problem with my charmer with WM6...
For the reason and a kind of solution/workaround see my post here:
http://forum.xda-developers.com/showpost.php?p=1548598&postcount=237
I can not believe this topic is up again !!try Crystal or Touch v7 or even transformer 1.1 they don't have any problem with charger! because they use the right drivers.
Hope it helped.
hma4 said:
I can not believe this topic is up again !!try Crystal or Touch v7 or even transformer 1.1 they don't have any problem with charger! because they use the right drivers.
Hope it helped.
Click to expand...
Click to collapse
U are wrong I have same problem with transformer 1.1 and I wrote it in that topic but nobody answered to me, and the problem persists. I am seriously thinking of coming back to WM5.
hi all,
i have problems with my ipaq rw 6828.
it only charge when i turned off the device. but when i turned on the device it will stop charging and can't connet to ActiveSync either.
i have done anything (soft reset, hard reset, repair bootloader, change the rom ) but still can't get out from this problem.
can anyone help me please or at least show me the thread similar like this if there's any...
big thanks,
IPAQ dosn't charge
Most probably you have damaged your usb connector. This model dosn't charge without signal. For a permanent comfortable solution, you should get the bottom connector changed from a good repair shop. You can charge for now by connecting charger first, clicking on charging icon on top, then click on usb charging, click slow charge and click ok. then repeat the steps and click on fast charge and click ok. (looks tedious but is quick) . I have been charging my mobile like this for a year now. You know going to service center is a time consuming process. Also I will have to do for a day without my mobile which is nearly impossible. I backup my contacts on memory card for backup purpose and activesync wont work, but thats ok.
Hello all,
since today my phone doesn;t start up
it doesn't charge
I know that battery works
I hope someone has a positive answer for me ( I don't wan't to ready "you have to send it to htc" 'cause on this hd2 i installed hslp so no garanty
Karish1989 said:
'cause on this hd2 i installed hslp so no garanty
Click to expand...
Click to collapse
just remove hspl, guarantee restored.
when you say "doesn't start" do you mean there's nothing at all, or it stops during loading?
what model phone?
what's the last thing you flashed?
have you been using android?
samsamuel said:
just remove hspl, guarantee restored.
when you say "doesn't start" do you mean there's nothing at all, or it stops during loading?
what model phone?
what's the last thing you flashed?
have you been using android?
Click to expand...
Click to collapse
Hey Samuel,
Doesn't start means noting at all
I don't know the model but I live in holland so it's a 512 mb one
Last thing that I flashed was artemis rom v30 i gues
No android sir
Btw how can I delete HSPL it if i can't start it
check for bent battery connectors
samsamuel said:
check for bent battery connectors
Click to expand...
Click to collapse
Connectors are fine not one is bent
Other tips
remove battery leave out for a few hours, connect phone to usb and wall charger, and only then insert battery. (That stops it trying to turn on the phone when you plug the charger in) leave to charge for a few hours, see what happens. It could be that the battery has become fully discharged because linux isn't handling the battery charge protection properly (maybe, heh)
Other than that, how do you know the battery is fine?
samsamuel said:
remove battery leave out for a few hours, connect phone to usb and wall charger, and only then insert battery. (That stops it trying to turn on the phone when you plug the charger in) leave to charge for a few hours, see what happens. It could be that the battery has become fully discharged because linux isn't handling the battery charge protection properly (maybe, heh)
Other than that, how do you know the battery is fine?
Click to expand...
Click to collapse
'cause i tested it on another hd2
Thanks so much!
samsamuel said:
remove battery leave out for a few hours, connect phone to usb and wall charger, and only then insert battery. (That stops it trying to turn on the phone when you plug the charger in) leave to charge for a few hours, see what happens. It could be that the battery has become fully discharged because linux isn't handling the battery charge protection properly (maybe, heh)
Other than that, how do you know the battery is fine?
Click to expand...
Click to collapse
Can I just say THANK YOU!!!! I just flashed the new leaked update from football and my phone wouldn't boot after soft reset. But you're trick worked like a charm. THANKS AGAIN, I was in a serious panic!
no problem.