Related
Hello,
I recently acquired an i-mate and before doing anything, decided to perform a ROM upgrade. It started with ROM version 1.66.00WWE and Radio version 1.10.00. I followed all the instructions on the clubimate website. The ROM upgrade (Step 1) went well, until I started the English Language customization (step 2). That program froze on my computer and left the i-mate in bootloader mode, even before starting the Extended ROM upgrade for the customizations. When trying to upgrade the main 1.72 ROM again, it gets stuck at the Radio Stack Upgrade (to version 1.14) at 14%, then either exits with no message (Win XP), or gives a Radio Stack Upgrade error message (Win 98 ME). The phone meanwhile says that it is perfuming the radio stack upgrade and to please wait. Waiting for an hour yielded no change. The following is the log file entries of the part for the Radio Stack upgrade:
03:06:42 Connection with USB
03:07:52 Begin Stage 4
03:08:22 Radio Erase retry 1
03:08:59 Radio Erase retry 2
03:09:15 Stage 4 Complete
03:09:15 Begin Stage 5
03:09:15 Write block1
03:09:26 Write block2
03:09:32 Write block3
03:10:08 Radio Update data retry 1
03:10:16 Write block4
03:10:24 Write block5
03:10:32 Write block6
03:10:40 Write block7
03:10:49 Write block8
03:11:25 Radio Update data retry 2
03:12:01 Radio Update data retry 3
I tried many times, but get the same result. I followed all advice on this forum and searched all over for solutions, from getting the device into bootloader mode (power button + action button + reset), making sure that my PC does not have any other USB device connected, that the only programs running are the upgrade utility and ActiveSync 3.7.1, etc.
I also notice it takes approx 1 hour from start of upgrade until the Radio Stack Upgrade, instead of the advertised 30 minutes. Someone mentioned that this Radio Stack Upgrade problem may be caused by a security feature on the Radio Stack ROM preventing the installation of older versions. However, I am installing the newest (ver 1.14), so this should not be a problem. With a hunch, I decided to try the English Language Customization (1.72.800) upgrade again, and the extended ROM upgrade worked, but still no Radio Stack. So now I ave everything upgraded, but a blank Radio Stack.
Now when performing a hard reset, I get the blue screen with "i-mate" written on it. In the bottom right only the version of the ROM "D 1.72.00 WWE" is shown, but it says "No GSM" right above it. It takes approx. 15 minutes to boot (with blue Bluetooth LED flashing), then goes through the screen alignment and intro procedure. After that, it installs customization and boots again. It takes another 15 minutes to boot and the phone functions only as a PDA. Even a soft reset takes 15 minutes (with Bluetooth LED flashing). I tried upgrading again after that, but no use. Going to "Device Information", I see the versions of ROM and Extended ROM, but the Radio and Protocol are blank.
I tried phased upgrading, where I would include the main ROM upgrade file into to the directory where the archive was extracted, then extended ROM, then radio stack. Everytime the radio stack upgrade failed (i.e. stuck at 14%), I would try to upgrade that part only, since all others upgraded successfully.
I am really out of options. Any help would be highly appreciated.
Thanks!
I asked Carrier Devices (clubimate) about this step 2 because on the official download page all I saw was the step 1, no step 2 and no link to download.
The answer I got was there is no english customization 800, only a beta. The customization or step2 would be presented for arabic or telstar etc based on your IMEI # not for english it is contained in the first .exe
So you MUST have got this 800 customization and maybe the main upgrade from on here because it was never on the offical download page. Only the BETA from the FTP which some hacked into on clubimate and posted on here.
Go to the official download page on clubimate (register if you havn't) and dowload the official .exe upgrade (one file) and see if it will run. Don't get it from here.
RUU172126WWE_imate.exe
Hard reset a couple times and that should be it. The upgrade does take a LONG time to do.
If that does not work, you might have to do a warranty repair, I would use the online chat support on clubimate, just watch for when they are online and ask. I don't think you can just flash the radio portion.
I find 1.72 VERY stable and fast. Good luck!
Hmm.. All files were downloaded from the official clubimate website (I had to register in order to download). Talking to customer support, they were aware of the Step 2 customization file on their site (they recommended it, too). I doubt I downloaded hacked ones.
Still a loss on what to do, other than take it to a service center, that is (anybody do that? was it expensive? took too long?).
I tried a suggestion where I extracted the Radio Stack ROM upgrade file from version 1.66 and installing it separately. Still stops at 14%. I also tried a full reflash back to 1.66, but also same result. Took it to an i-mate service center nearby, was surprised that they didn't even know how to put the i-mate into bootloader mode (I had to show them)! All they could do was try reflashing using the same utilities we use (still no luck). They said that anything more elaborate would require sending it to Dubai. So much for "service" center. So, no luck there, either.
Also tried to reflash to the orginal 1.00 ROM with 1.05 Radio: The upgrade utilitiy that came with that version won't go past the small "please wait...." screen. Just sits there.
Really sad. I didn't even use this phone (figured that the best start is to perform a ROM upgrade). I'm not that impressed with how fragile ROM upgrading is (and I am careful with using only official releases). I thought after the Wallaby, things would be more robust. Maybe I shold dump this thing and get an HP h6300 series.
Note that I managed to successfully upgrade to 1.72 at least once. It was only when trying the 1.72.800 customization did things start to go south.
Also, does it matter whether the SIM card is in the phone or not while upgrading? Instructions are not clear, although they did mention that the phone will behave as if it is out of area.
Another question (desperate and a long shot, maybe stupid), Do SIM cards from say T-Mobile have an effect on i-mate phone Radio Stack ROM (i.e. lock it, etc.?)
ANY help would be appreciated!
i-mate and bootloader
I just got to see the problem as I am going through the same search for answer. How to get to the stage of bootloader? Somehow I feel that the device has crashed: While I was trying to install the upgrade RUU172126WWE_imate, my laptop, and for some odd reason, shut itself down, then auto restarted. The i-mate from that point on did not respond and in fact all lights on the device went blackout. I tried soft and hard resets but to no avail. I even removed the battery for several hours and when I re-installed it, all what it gave me was the word i-mate (but no backlight). Any advise on how I can get the device functional again.
Thank you.
Put your device in bootloader (press the Jog button and the Power button at same time and press the reset switch). Place it in the cradle and re-run the upgrade. That should work OK.
Jog
Thanks for the quick reply.
Power and reset button I know, but I am not familiar with the Jog button on the i-mate (Pocket PC PE). Appreicate your help.
Its the multi-directional button in the middle at the bottom. Press it straight down.
Right firstly dont shout at me if by spending the last two nights constantly looking at this website with little sleep to find a solution to my problem when the problem has already been recolved on this website.
i have a G4 o2 xda Mini s 2.24 rom.
I have been using the phone on T-mobile faultlessly (except answerphone)
I am now on orange but get the dreaded
"the phone is not ready. please wait 15 seconds and try again"
i have now been waiting 48 hours and it still dont want to have it. I have use of phone but not of txt or settings.
I think this problem has been solved by flashing the ROM and well that gets me in to all sorts of problems as mine is a G4 and the only way currently to unlock a G4 is using the iemi website which is very much mentioned on this site. I am prepaired to do this of you think it will work?
1. firstly is there another way?
2. secondly ive searched forum after forum trying to resolve these issues with people recomending files and software and all with different procedures to install a new rom. does anyone have a recomendation on which ROM to choose and what tool to use to do it? and where to get the downloads?
3. This is a great site and very helpfull would just like to throw my gratitude out there to you all.
In a nutshell
Like many others i have searched this site and still do not understand unlocking and ROM flashing. I did try to do a ROM flash to the k-jam 2.16 ROM update where i got an error [296] please upgrade NBP? i figured later that it would probably only work on a G3?
I am desperate to get this working and soooo lost!
Am currently downloading wizard_love ROM which apparently does not require an unlock. But then its only a Radio upgrade and may not solve my problem
wizard love is not a radio update it is a rom if you want a radio update try this one http://rapidshare.com/files/7927757/radio_2.47.11.exe.html
same as i am running on my phone i run the wizard love with the 2.47.11 radio rom and it is not CID unlocked
Will that radio update work on my locked G4?
Do you think it will cure the
"the phone is not ready. wait 15 seconds and try again"
or is this a sim lock issue?
Really glad you chose to help me
WOW
Yay its fixed.
thanx for your help everybody on this site.
for those of you finding this with the same problem here is a STEP BY STEP guide!
1: go to ftp://ftp.xda-developers.com/
2: Click on "Wizard"
3: Click on "ROMS"
4: Click On "Other_unknown"
5: Click on "Wizard_Love_2.26.10.2_WWE_Novii+CF2.rar"
6: be patient it will eventually download this site does not have a great upload speed it may also fail a few times.
7: once downloaded use Winrar or winzip to extract the file to your root directory.
8: Charge your phone fully overnight (IMPORTANT)
9: connect data cable and backup (this rom update will wipe your device clean)
10: remove device from active sync and set as guest when reconnected.
11: Double click the file you have extracted and follow the Italian instructions (dont worry this will give an english menu once loaded)
12: avanti means next and all the blurb is highlighting some important stuff to do before proceeding (translate at bablefish if you want)
13: the device will restart and go to a grey screen with a percentage bar.
14 BE VERY VERY PAITENT it is imperitive that you do not interupt this process in anyway! it will stop in places especially at %96 but leav it to run.
(I WOULD ALSO RECOMEND STOPING ALL UN-NESSARSAY PROGRAMS IN THE TASK BAR BY RIGHT CLICKING AND EXIT)
Once complete you will have a clean install with all word apps without the o2 junk AND you want get that stupid "the phone is not ready. wait 15 seconds and try again"
This is only a know fix for me on a o2 XDA Mini s version G4 Locked please do not attempt this unless you are completely confident and that you are in the same situation
It feels good to put something back to this excelant website!
if i use this g4 rom i will loose my default language?
probably i wont find again pt-br wm5, or someone know where i can find it?
another question, there some way to make a backup of my rom?
Yes there are ways to make backups of your roms but not sure how realiable they are no experience.
What is your default language? if its anything other then English then probably
what have you lost?
Strange
I have one 9100 G4 with this problem (phone can't register network) "the phone is not ready. wait 15 seconds and try again" and I flash with some custom firmwares but phone can't register sim network. Phone all the time newer ask for net sim lock code and work like unlocked phone. When I flash with this Love flash, phone for first time ask for sim net lock code I unlock with Lokiwiz03 and phone work normaly with full network
Thanks for this great info
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
hamed_ppc said:
Hi,
i have one bricked Hermes,and I've tried all the methods that i read ever and i explained completely here:http://forum.xda-developers.com/showpost.php?p=1571302&postcount=1548 but no result.
yesterday i tried SD method with wm6 ROM that i downloaded from htc sit ,but i had this on my screen:
HERMIMG.nbh-
IPL - OK
BOOTLOADER - OK
SPLASH1 - OK
SPLASH2 - OK
EXTROM - OK
GSM -
OS -
Update In Progress...
it freezes at GSM!!i waited 45min,but nothing changed,then i take out the battery.
do you know why?and what can i do?
sorry for my bad English.
Click to expand...
Click to collapse
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
eraserbabyboy said:
Hi I have the same problem, radio refuse to flash, something wrong with my radio chip, I have a OS but no gsm. "Welcome to the club" But, I don't know how to solve that problem.
Click to expand...
Click to collapse
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
hamed_ppc said:
ok,we can continue this thread to find the solution,is there anybody knows how we can fix this problem??
is it a hardware problem??i wish it isn't.
Click to expand...
Click to collapse
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
eraserbabyboy said:
I think that is hardware problem. I flash only OS, without radio and now my hermes work only as PDA, wi-fi and BT also work, but still no gsm.
Click to expand...
Click to collapse
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
hamed_ppc said:
ok,but how we can fix it?Should we replace something in our pda??
i want to know is it fixable or not??
Click to expand...
Click to collapse
I don't know. In my country I have a htc services and they say to me that my motherboard must be replaced because is to hard to change only radio chip and they only change all motherboard. For 350 Eur(+some Eur) I can by new Tytn. Now I use my pda in my home (in toalet) via wireles to look internet. Work's fine, but sometimes freeze OS and I must do soft reset.
ok guys , i might found a temp solution or maybe it will work permenantely with some one , but i need some one who have spare time and steel nerves coz i'm sick and tired of trying many files and roms and radios .
so any one is willing to start this experiment with his hermes and his spare-time lets begin .
first of all i want to declare that this method revived my radio and i used my device for one day just fine receiving and making calls . then the next day i decided to make a hard reset to see if the radio will stay working , and the result was the radio was dead .
here we go .
1.flash you device with GM360 gold edition http://forum.xda-developers.com/showthread.php?t=329282 don't ask why just try it .
2.after the phone is flashed with gm360 and working ok with no radio or "no gsm" messege now you should flash your phone with your device manufacturer WM5 ROM .
3. to flash WM5 rom you need to follow mr.vanx guide for safe WM5 downgrade . http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=27&Itemid=26 here it is .
4. now after you've flashed WM5 successfully and your device is also working fine with it but still no radio or "no gsm" . you need to flash only radio to your device . no OS only the radio .
5. download this radio . http://forum.xda-developers.com/showthread.php?t=334697 and unrar it on some folder . and don't flash it yet to your device .
6 download Olipro RUUwraper 5.2 http://forum.xda-developers.com/showthread.php?t=298737 there u go.
7. now the files from step "5" which they are the radio 1.54 put the file ruuwrapper from step "6" in the same folder with them to start the radio upgrade using "RUUWrapper.exe" not "ROMUpgradeUt.exe" . when u run it you will have multiple choices , choose "Force Unsafe SSPL (not recommended)" . .
now the radio upgrade should go smoothly as it went for me the first time . after the radio upgrade is done u should be able to use ur radio fine .
now can some one take half the effort of me writing this long method and try it ? thanx for the feedback also .
good luck for all .
feedback
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
a-h-t1,
thx for your discription,I'll try your method as soon as i can(because ADSL isn't much available!!)
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???
eraserbabyboy,
can you tell me when did this problem happen to you(i mean loosing GSM)??did it happen when you was flashing WM6 ROM??
I really want to know why this problem happen to me while i didn't have it before flashing??is flashing cause to a hardware problem???[/QUOTE]
Hamed I dont know what's happened with my hermes, because I get him with the no gsm error. I have a bootloader 1.09 with enable kitl mode. In PB I lose many, many night to boot os but without sucess. And post many question here, but without answer, a-h-t1 is the first men who try to help and meny 10x for that.
So, before 2 week I send my hermes to Imei-check and before few days I get it back with bootloader 1.01 mfg and instruction from imei teamroblem_Description: The radio chip is faulty 100%. Now the handset is usable as PDA only (wifi + bluetooth working too), but not as a phone (the GSM module refuse to answer/flash).
DO NOT attempt to upgrade the firmware in the phone with a firmware which has RADIO upgrade, as it will put the handset back to the brick mode!!!
Model is SVP3100.[/COLOR][/COLOR]
After that I put the SPL 2.30 Olipro to prevent any future damage, and continuing to "play" and experiment, because I don't have more than, to loose. I have P3300 who work's very nice....
It's possible to boot any OS without radio. (I use nbh tool 1.01 to extract nbh file to nb and after make Ruu_signed but without radio).Also try metod via SD card and same to you, stop when try to flash radio. Also it's happened on 12-13%(independed of the rom version) when start full RUU upgrade. And when try to flashing only radio they stop on 0%. On 12-13% ruu upgrade try to flash radio in this moment, and this is the end. I am not sure is this hardware problems, but imei (I dont belived too much) said YES. In win OS I don't have a imei identification (in device info/identity) and of course radio version is blank. Sometimes happened that os blocked(freeze) or device just totaly go to power off mode and I must to do soft reset. Is any way to totaly disabled phone function in registry? I mean that freeze when phone try to find network or sim, but I am not shure. Last night I open my devices, and get out motherboard, just to see this famously radio chip. It's not possible in "home made" to change yourself this chip. Only if I have a more lucky and found some broken hermes with ok motherboard for 100-150 eur...
I hope that my info just little help to you to know "mystery" about our problems.
And one more time 10x to a-h-t1!
eraserbabyboy said:
Just now I finished all, by your instruction, step by step. When do the last step, flashing radio rom it's stuck on 0%. Many thank's for help, but it does not work for me.
Click to expand...
Click to collapse
I just tried it and same result like you
but many thx for a-h-t1 and eraserbabyboy's help.now I want to try fix it in hardware way!!
but if anyone has idea about our problem please say here.i think it's going to be common problem,because i see many people in xda who has the same problem.
Read this, to see how I solve my problem. But I still have a hope, that it's not hardware problem and in the future I hope that someone will found software key to solve our corrupted radio.
http://forum.xda-developers.com/showthread.php?t=338413
ok,i think it was almost three months ago that i had posted my last post!!
you know my problem and i feel it has became a common problem for poeple who have hermes,unfortunately.
last week,i found a service man who believed that my phone's problem is fixable.
so i gave my pda to him,and because he lives in another city,i returned to mine and waited for him.
yesterday i phoned him,and this is what he said to me:
"first,I tried software methods,but the result was nothing!then I disassembled the device and changed the piece of RF of your ppc.it hung first,but now it loads the windows and find the antenna too!!but immediatly after finding,it hangs."
he has used the Dopod's RF in my htc TyTN and thinks that this problem(hanging after finding the antenna) is because of not matched radiorom.
I have good feel about his say,and i'm trying to help him find the correct radio rom,because he is so busy and cant search the internet to find the radiorom.so I've mailed him the link of wiki's radio rom for hermes and I hope someday this tragedy will finish but i'm not sure.
if anyone have comment about this case please help us,specialy about the RF,because I don't know anything about the Radio Frequency.
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
1a
Its called a 1a brick. Look in the sticky brick section. like 170+ pages of this issue. I believe I have the same device. No GSM/ no imei no radio. Can flash rom's all day long, as long as rom doesnt include GSM. Try to flash ANY GSM does nothing, let it sit 10hrs... Nice free PDA, till i can figure out the wiki & there must be hope for me. Till then my wiz100 keeps rocking. Like the 8525, but wanted it more as a phone then just pda.
nicknowsky said:
I HAD the EXACT same problem I Hermes would get stuck at 11% EVERYtime I tried to flash the OS rom with WM6!! The upgrade process would start and then [email protected]! 11% and I would get ERROR 262 (loss of communication) No FIX anywhere, even with site full of "supposed Hermes Fanboys" Nothing NOBODY knows nothing bout this issue. BUT I think I have found a fix (I have recovered twice gonna do it 1 more time to confirm METHOD)
Click to expand...
Click to collapse
I hope you will fix your device,but when I read about your solution,I felt that guy who brought back to life your device,has just used a ROM whitout GSM,the way that we have been using since months ago.if I'm in mistake so tell us more.
The end of the Tragedy
o0o0k!!
as I've said in my post,the service man that I love! replaced the RF of my pda,but new problem was hanging after finding the antena!!
as he told me yesterday,he tried another used RF,but this time the TyTN's one and it worked) and there is no problem.so after 4 months nearly I can use my pda.
as soon as I can,I will go to get my device and test it myself.
be wait for my smooth experience!!
What is this???
replaced the RF of my pda
Andrey_ORIN said:
What is this???
replaced the RF of my pda
Click to expand...
Click to collapse
its full name is RFSP=Radio Frequency Signal Processor.it's one of ICs on your Hermes mainboard.it needs a professional to replace.I'll explain more early.
but if you have same problem and have tried all of the the wiki methods then you can test my solution.
Hi,
I have a MWG AtomLife running windows mobile v6 i have been trying to install version 6.1 using DSUU.
I get 1 of 2 problems using 2 different version of 6.1 the first problem is
Everything starts off fine, phone softresets but it boots into windows and the DSUU says it failed to connect. No damage to phone.
the seconed problem is it says the country region (or somthing along thoses lines) is wrong and its not compatible with my phone.
I would just like to point out this is MWG not a 02 i got this phone from Portix (the uk disti for MWG) 2 days ago.
Any advice is muchly appricated as i said i have read the wiki, every post i can find on it all the how-tos in the various version but to no avail.
Thanks
FL1X (not fl1c i typod while creating my username how annoyingly rookie of me)
PS> this is the version of 6.1 i was trying to install (using the inbuilt installer and also "pcinstaller1.zip" from another thread) http://forum.xda-developers.com/showthread.php?t=413950 I know it says Exec so i tried this one http://forum.xda-developers.com/showthread.php?t=360664 again to no avail.
Update: just tried http://forum.xda-developers.com/showpost.php?p=2433912&postcount=112 again same problem of the phone softresetting and booting back up loseing connection failing to install.
Hi, if you want to upgrade to WinMo 6.1then you cannot upgrade via DSUU. It is not possible till a DSUU is developed.
For upgrading you would need to use the SD card. Procedure is given in the last link you had visited.
P.S. Do not use ATOM Exec and HP update utilities on Atom Life. You might brick it.
Thanks Maniac, i will look into doing it that way over the weekend, in the event i brick it how can i return it back to the original version of wm6?
'brick it' means ur phone is dead. the term is kind of a metaphor. u can use ur phone as a brick
Hi folks! Please help me! I killed tons of nerves because of this phone!
So here is my sad story. 1 Year ago i bought second hand HTC HD2. Seller told me that phone is locked to T-mobile(Not US one!! UK one!! Transaction was held in UK). After I got phone I rushed home to install Android and I was successful at this point. Then I bought a unlock code from ebay, so I Finally could make phone calls. Then I realized that the only way I can insert code is putting back WM 6.5. And here the worst part starts. I read hundreds of manuals but still was unsuccessful. I downloaded many official WM 6.5 ROM installers but they didn't flash my phone. They just got stuck at 0% and error pops up. I was trying it for a week and then I just raged and put phone to the shelf and was waiting til I get will power to start over again.
I hear that every phone needs its own ROM installer for particular region and operator but I couldn't find UK T-mobile ROM so used many others and it didn't help.
I also heard that by IMEI it is possible to find to what operator the phone is locked(just to check if seller didn't lie me) but again I didn't manage to do so.
Here is my IMEI 354120035834066
Please experts help me, little nooby, with this horrible situation.
thank you
Many people report that you can in fact put the code in under android after all,,,, perhaps its only earlier versions that couldn't. That being said you probably want to put a new one on since it (and magldr) will be old versions.
Anyway, all that hanging at 0% is because there is no hspl installed.
Plenty of places to get tmo stock rom,, go put
3.14 ruu Leo tmo uk
.....into Google. When I just did it the real htc site came up second.
Its not necessary, tho,,
Phone into bootloader,
connect USB
Use hspl4 to set 3.03.hspl
Return to bootloader
Flash any 3.14 rom USING USB,NOT SD CARD
Done.
samsamuel said:
Many people report that you can in fact put the code in under android after all,,,, perhaps its only earlier versions that couldn't. That being said you probably want to put a new one on since it (and magldr) will be old versions.
Anyway, all that hanging at 0% is because there is no hspl installed.
Plenty of places to get tmo stock rom,, go put
3.14 ruu Leo tmo uk
.....into Google. When I just did it the real htc site came up second.
Its not necessary, tho,,
Phone into bootloader,
connect USB
Use hspl4 to set 3.03.hspl
Return to bootloader
Flash any 3.14 rom USING USB,NOT SD CARD
Done.
Click to expand...
Click to collapse
Thank you, but always when I am trying yo install HSPL4 critical error comes up. I think it comes up because I have spl 2.1000000 which should be 2.08 I found information that in order to downgrade to 2.08 I need to flash official ROM. But when I am trying to do so it is always stuck on 0%...
I am so $%^& up ...
any ideas?.... thx
Does HSPL4 not allow you to install 3.03 to your device ?
T-Mobile UK ROM is available direct from HTC site:
http://www.htc.com/uk/help/htc-hd2/#download
Mister B said:
Does HSPL4 not allow you to install 3.03 to your device ?
T-Mobile UK ROM is available direct from HTC site:
http://www.htc.com/uk/help/htc-hd2/#download
Click to expand...
Click to collapse
Hi. Thanks for ROM, but still.. got stuck on 0% and doesn't go further..
When I try to install HSPL4 it always gives me critical error...
Fixed my problem. Now everything works fine!! Thank you very much guys!!
how ??
rom4eg said:
Fixed my problem. Now everything works fine!! Thank you very much guys!!
Click to expand...
Click to collapse
explain