I need help friends. I need a room that works, for G4 with "CID" locked. Another help,
the screen. put white go vanishes, which can be?.. please help i am cry
Be a bit more specific what were you trying to do when this happened ? were you trying to upgrade and flash a Rom,which Rom did you flashed ?
Cheers!
the screen put white. when running cualquier programa de la "Pocket". as vanishes slow the colors the screen
Related
Hello,
I've a working OS 6.0 and beeing using it for last few months. I've done reformat with the same rom 2-3 times in between. Never had a problem until last night. I resetted the device after upgrading the rom and the screen was stuck on boot screen for long time. So, I did a bootloader mode (Camera key + softreset ) , which didn't come up. Nothing comes up now , and it drains the battery. Thats all I see.
Please help me with this issue.
thanks.
does you phone still turn on?are you sure you didn't flash a g3 bootloader on a g4 chip?that could brick the phone
Yes, it does turn on & stucks back in bootscreen. I can recharge the battery and all, but can go no farther. I've used the same rom before and worked fine everytime. So, I find it quite strange not to work now.
try flashing another compatible rom..or the original rom and them flash your wanted rom again..be carefull NOT TO FLASH A G3 ON A G4
Woohoo!! Got it working by changing USB port and retrying the bootloader mode. Worked fine. I think it's actually the Key combination bootloader mode that takes a little getting used to
Thanks all for your reply.
your welcome....have a nice one and enjoy yourr functional wizard
Thanks !
Wizard
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
NO need to worry. Just go to your bootloader mode. For MDA Vario its Camera + softreset key.
Than reinstall with a working rom.
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Which version do you have? G3 or G4? Is it SIM\CID unlocked?
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Download and flash official Rom in bootloaders (3 colors) screen,it'll recover back to normal.
Any news about ur Mda?
help, i fall my pda jsut now. now my screen can touch but there is ntg appear in de screen. Please help me and is there any solution to solve this problem by myself??? ty~
Hello! I tried to flash my i9000 back to 2.1 efter a un successful 2.2 upgrade... When i boot my phone i see the boot animation but after that the screen is black.. if i pres any button the button glows. So i know it it alive but why is the screen black? Can some one please post a little tutorial for me ? By the way... I live in Sweden so i have the international version...
Cheers Jon
hi change pit try 803
hello my samsung galaxy does not start up wen i start him up it loopsback o the startup screen
does any wan have the same problem
A mi me pasa lo mismo
yo tengo un samsung galaxy tab 2 10.1 gt-p7500 y solo me aparece la pantalla de inicio que dice Samsung Galaxy Tab 10.1 y no avansa.. no prende.. qe hago?? : Confused:: Confused:: Confused:: Crying:
Did you try keeping your finger on the power button for at least 20sec if ive had this problem normally around 14-15sec itll fire up ?
uberrooter said:
hello my samsung galaxy does not start up wen i start him up it loopsback o the startup screen
does any wan have the same problem
Click to expand...
Click to collapse
Can you boot into download mode?
Thee_Brayann said:
yo tengo un samsung galaxy tab 2 10.1 gt-p7500 y solo me aparece la pantalla de inicio que dice Samsung Galaxy Tab 10.1 y no avansa.. no prende.. qe hago?? : Confused:: Confused:: Confused:: Crying:
Click to expand...
Click to collapse
Can you post in English.. I need to understand you to help you
Hi! This is happening to me too.
It bootloops in the first part of the startup, when "samsung galaxy tab 10.1" is shown and before the rom animation popups.
I've tried going into recovery mode and it works but when I try to do a full wipe or wiping dalvik cache it freezes (not with user cache wipe). I've tried to re-install the rom, which installs correctly but problem remains.
I'm using CM10.1/SGT7 for P4WIFI ROM (been using the same version with no problems for a couple of months), ICS bootloader and CWM recovery.
Any help? Thanks in advance
cyberchin said:
Hi! This is happening to me too.
It bootloops in the first part of the startup, when "samsung galaxy tab 10.1" is shown and before the rom animation popups.
I've tried going into recovery mode and it works but when I try to do a full wipe or wiping dalvik cache it freezes (not with user cache wipe). I've tried to re-install the rom, which installs correctly but problem remains.
I'm using CM10.1/SGT7 for P4WIFI ROM (been using the same version with no problems for a couple of months), ICS bootloader and CWM recovery.
Any help? Thanks in advance
Click to expand...
Click to collapse
Hello, first of all sorry for my English, it's not my language.
I have the same problem, and I've been using the same rom that you said. I used that rom for a several weeks, and I love it, but suddenly I can't start the tablet, there is a loop and I only can see for a seconds the logo of CWM and they restart again.
I've gone to recovery, and I put another time the rom after the wipes, but the problem is the same.
Finally I've try with Odin, and I've put a samsung official rom. The sequence with Odin was correct, but when it is restarting....it's stopped in the Samsung Logo, and I can not open the tablet, even I can not close it.
Someone have any idea what else I can do?
Thank you very much
ecastanyos said:
Hello, first of all sorry for my English, it's not my language.
I have the same problem, and I've been using the same rom that you said. I used that rom for a several weeks, and I love it, but suddenly I can't start the tablet, there is a loop and I only can see for a seconds the logo of CWM and they restart again.
I've gone to recovery, and I put another time the rom after the wipes, but the problem is the same.
Finally I've try with Odin, and I've put a samsung official rom. The sequence with Odin was correct, but when it is restarting....it's stopped in the Samsung Logo, and I can not open the tablet, even I can not close it.
Someone have any idea what else I can do?
Thank you very much
Click to expand...
Click to collapse
Finally I solved! I put by Odin the recovery and root again and it starts.
Thanks
Enviado desde mi GT-I9300 usando Tapatalk 2
Please i need help. I have a leagoo kiicaa mix and this week i had a message for an OA update wich i did.
Trhu the installation it broke down and showed me an error.. After that the phone didnt boot anymore. I searched and someone told me to flash the phone. I found the stock Rom, Flashtool everything, and complete the installation successfully..
But after i unplugged the phone from PC its dead now wont respond to anything,won't charge, won't go on, nothing just dead, and i don't know what to do, or what went wrong. Please help me, is there a chance to save my phone?
Please can anyone help?
Hi there, have you tried installing TWRP by SpFlashTool?
Maybe the PC recognizes it in the preloader. And after that you called flash a ROM. I recommend flashing the pixel 1.2 (which I'm running right now) and works properly.
If you are going to use pixel ROM disable Xposed, otherwise your phone will be considerably low
You will find all the files at
www(dot)needrom(dot)com/category/leagoo/kiicaa-mix/
Ciao ho problemi ho installato la twrp e ha funzionato, ho caricato la pixel 1.2 ma non parte lo smartphone si riavvia sempre in twrp. Mi aiuti?