hello,
i have two questions about theses roms here:
1. some roms have the 3d cube from the HTC touch enabled. is this cube loaded into the program memory (ram) all the time or is it only loaded from the rom during the first usage? i don't use it and i don't know if i waste some ram or not.
btw: is it possible to create some .cab files for touchflo and this 3d cube? with that no extra touch roms would be needed and everyone could install them on his neutral windows mobile 6 rom, which flashed on this device.
2. in the past we could unlock the extended rom and use it as a normal storage memory. is there any way in windows mobile 6 to use it like that?
LordDeath said:
hello,
i have two questions about theses roms here:
1. some roms have the 3d cube from the HTC touch enabled. is this cube loaded into the program memory (ram) all the time or is it only loaded from the rom during the first usage? i don't use it and i don't know if i waste some ram or not.
btw: is it possible to create some .cab files for touchflo and this 3d cube? with that no extra touch roms would be needed and everyone could install them on his neutral windows mobile 6 rom, which flashed on this device.
2. in the past we could unlock the extended rom and use it as a normal storage memory. is there any way in windows mobile 6 to use it like that?
Click to expand...
Click to collapse
Yes to all questions
1. The cube is loaded one into the memory and stays there
It's possible to make cab files but that will slow donw to os
2. yes you can open the extrom and use it as storrage
HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1]
"Bootphase"=dword:2
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash]
"Folder"="Flash Disk"
"MountAsROM"=dword:1
"MountHidden"=dword:0
"Name"="FLASH Disk Block Device"
"PartitionDriver"="mspart.dll"
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\MSFlash\FATFS]
"MountAsROM"=dword:0
"MountHidden"=dword:0
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1]
"MountHidden"=dword:0
that should open the ext rom
thank you gullum for your reply.
about the cab files: if these additions are loaded into the ram during the boot, whould it still slow down the device on normal running? afaik the rom is as fast as the normal storage memory.
LordDeath said:
thank you gullum for your reply.
about the cab files: if these additions are loaded into the ram during the boot, whould it still slow down the device on normal running? afaik the rom is as fast as the normal storage memory.
Click to expand...
Click to collapse
I'm not shure about that but when these extra apps cab around they were all cab files before we got them coock into the roms and our phones got slowed down to their knees
ok.
and about the extedend rom: it becomes visible, but i can't write anything on it
ok it's the official dutch t mobile rom but with a few things added :-
windows messenger 10.6
htc home plugin
htc audiomanager
htc album
htc x button v2
schaps 12 button comm manager
schaps advanced config tool
battery meter
total commander
kaiser 3g dialler
ftouchflo a4 - (this is not the cube just a version of touchflo)
and i left all the t mobile network settings in there too.
your phone needs to be super CID, and hard spl is also a good choice as nobody wants to be the proud owner of a brick, all the programs needed to do this can be found on this wonderful site, this will only flash your operating system not your boot splashes.
This is the first time i have attempted at cooking\customising a rom so it may be a bit unstable
had a bit of trouble configuring the ftouchflo so got it working by doing this -
soft reset
open the windows menu then go to - instellingen - systeem - scherm
then realign the screen
then got to your programs menu and start the ftouchflo and calibrate it, this should get it running
FIRSTLY a big thank you to all the people who run, moderate and all who have contributed to this web site, without their knowledge, insight and patience it would not have been possible to learn how create this rom..!
the download link is:-
http://rapidshare.com/files/67380306/cloggyrom1.exe.html
Based on helloworld1's Jade ROM (LINK) I made an ROM with more of the HTC Jade software.
Since the HTC Jade had an bigger ROM memory than the HP iPAQ RW68xx i have made CAB files of the software to install ftom the SD card automatically, it is software witch is useful but not so hard needed. So after a hard reset orso you can use the device but you need te reinstall the rest of the software.
When you had tried the ROM by helloworld1 before you can see that it is just an Minilla 2D ROM but i wanted to go a step further so here it is...
The difference between the RW6815 and RW6828 download are not more than that the RW6815 use the HP camera app and have no radio software in the ROM and the RW6828 has the O2 camera app and radio software.
How to install?
1. Download the right ZIP for your phone.
2. unpack all the content of the ZIP (the nb0 file and the 2577 folder) to the root of an FAT32 formatted MiniSD card.
3. put the SD card in you RW68xx
4. press the two softkey buttons (the keys with the "-" symbol) and the reset buton, don't unpress before you see a white screen with the HP logo in the center
5. wait for 12 minutes.
6. now your phone is resetting to factory defaults and you can now do the things you will allways do with a Windows mobile phone like calibrate the screen...
7. the HTC autostart software will start and install some program shortcuts and other stuff and afterward it will reset the device. let the phone do its thing...
8. The last step is to start the autorun from the SD card to install the last pieces of software. It will start and install automatically and afterwards (about 4 minutes or so) you will be asked to reset the device, choose yes. You can underwhile reset your device and work with it. It will install in the backgroud (it is possible you think that the system feelf not so stable, the best is just to leave it)
9. Now you can use your device and use the advantage of the HTC software.
if you want to pre install some software of you own choice to the device add them to the INSTALL folder... See the subfoldernames and the items in that folders to see how it works (hint: the folders with the prefix "my" are installed silently)
Download
Version 02
HP RW6815 - 15M2D02 - [email protected]
HP RW6828 - 28M2D02 - [email protected]
Version 01
HP RW6815 - 15M2D01 - [email protected]
HP RW6828 - 28M2D01 - [email protected]
Just in case: My MediaFire directory
If you find any bugs or you have some ideas post them please.
ToDo list for next releases:
Code:
Make speakerphone button to work while calling
Remake the HP animated splash screen
Make camera and video link work in TouchFlo Photos and Videos tab
Change HTC opera splash screens to HP
Remove HP Photosmart (image viewer) (RW6815)
fix the file extensions for images and photos to HTC Album
a none realistic branwave (I think), make HTC camera app work for RW68xx
Bugs found:
Code:
for RW6815: zooming with camera causing strange screen.
playing video with the HTC Album software is not OK (press hang-up key to go back to the main screen)
Video rotation in HTC Album is wrong
Cannot chage backlight with the HTC Power program, use old Backlight software witch is present
Clear Storage (HTC software) doesn't work
Greetings,
Michel
P.S. You can donate me for the effort i put in this ROM via THIS link. If you donate you support me in making it a better ROM.
placeholder...
placeholder number 2...
Version 2 is almost uploaded (RW6815 is finnished, RW6828 is uploading and you can find him later on in my MediaFire folder or tomorrow with an direct link in the start post).
changes:
changed some of the HTC logo's for HP logo's (the splash screen is a new old style HP animated logo)
added some extra OEM packages of the HTC JADE
removed the HTC keyboard from the ROM and repacked it in a CAB
did a remake of the autorun for the CAB and REG files. You can now reset your device while the software is installing, it will go further where it was ended.
Some small cosmetic things (Youtube shortcut was not working on the programs tab on TouchFlo)
thanks alot i started to use.seems everything ok.looking very good mate good job
when got any notification touch flo is disabled.it auto launchs or says tap here to launch.
devilunix said:
when got any notification touch flo is disabled.it auto launchs or says tap here to launch.
Click to expand...
Click to collapse
The RW68xx is sometimes a bit low at RAM so the HTC software stops Manilla so u can use other software without problem. I don't think there is any solution for
thanks anyway ill try also version 1
Thanks for this rom, downloading now. been trying some other roms but i've got camera problem hope this will work.
thanksssssssssssssssssssssssssssssssssssssssssssss sssssssssss
thankssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Is there a way to root this rom without using miniSD card??
Rom OK but WiFi not working
I have flashed thi rom on my HP 6815, and looks great, but WiFi does not work.
launching HP asset manager The Wireless LAN section reports:
Driver REV: N/A
Firmware Ver: N/A
Hardware Rev: 1.0
IP Address: N/A
Mac Address: N/A
Radio present. Yes
I belive there is something wrong in the wifi radio firmware (different hardware revision?)
Please help me
Thank you
I copy all the files to root of my SD card... But when i reset my rw6815 to that hp logo in the middle, it passes about 5-6 minutes then my HP just resets it self but no ROM rooted to it just that ougly WM5.0
kemoba said:
I copy all the files to root of my SD card... But when i reset my rw6815 to that hp logo in the middle, it passes about 5-6 minutes then my HP just resets it self but no ROM rooted to it just that ougly WM5.0
Click to expand...
Click to collapse
i am truing manu rooms , but result is always the same
Phone is off , on settings have mesage : ¨wireless radio must be attached to use the phone ¨
Please help !
Thanks in advance
Brief Introduction
Code:
As what I've promised before, it's right here. Please report for any existed
bugs.
For guys who think that the automatically running ActiveSync is a bug, you can
use the "patch" attached - but I myself don't think that it is.
ROM Information
MWG Atom Life WM6.1 ROM WWE_080410_B2_DS
OS Core: CE OS 5.2.21057 (Build 21057.1.6.10)
Pagepool Size: 6 MB
OEM Softwares Removed
Aplix Jblend
Quanta Image Editor
Quanta Media Album
Quanta Setup Wizard
Visual On Streaming Media Player
Westtek ClearVue PDF Viewer
OEM Softwares Implantated
All the MWG OEM softwares (Except those listed above)
Adobe Flash Lite 3.1 (IEActiveX version: 9.1.122.270)
Adobe Reader LE 2.5.1.0.404840.06
Arcsoft MMS Version 5.2.2.66
Cyberon Voice Speed Dial Version 1.2 Build 100303
Esmertec Jbed 20090506.2.1
HTC Boot Launcher Version 1.0.1915.2530.2
LockStream Version 1.2.20100721
Microsoft .NET Compact Framework Version 3.5.9198.0
Microsoft Internet Explorer Mobile Version 7.11
Microsoft Office Mobile Version 6.1
Microsoft SQL Server Compact 3.5.5692.0
Microsoft Windows Live for Windows Mobile Version 10.7.0059.0600.1000
Microsoft Windows Media Player 10 Mobile for Pocket PC Version 10.3 Build 21057
Visual On Streaming Source Filter Version 2.7.2014.1626.00
Downloads
MWG Atom Life WM6.1 ROM WWE_080410_B2_DS (52.54 MB)
Try it first..........
Could U give a screenshot ? And how many Free RAM with this ROM ?
( The 1st tester Lol......... )
Abhy-Boy said:
Could U give a screenshot ? And how many Free RAM with this ROM ?
( The 1st tester Lol......... )
Click to expand...
Click to collapse
Sorry, I can't. I've applied a lot of changes in settings and installed a couple of softwares into my device already...
But it is MWG-like. It can be regarded as an official update from MWG.
You're really the first one!
About the free RAM at startup... I can get over than 24,000 KB at the moment(I had installed a lot softwares). I didn't apply any changes to the cache of file system, which means the cache size is still 2 MB as default.
It's as much as you can get in the latest official WM6 ROM, right?
aa125690 said:
About the free RAM at startup... I can get over than 24,000 KB at the moment(I had installed a lot softwares). I didn't apply any changes to the cache of file system, which means the cache size is still 2 MB as default.
It's as much as you can get in the latest official WM6 ROM, right?
Click to expand...
Click to collapse
I hope Your new ROM can give more Free RAM. Your Build 21056 only give me about 13Mb Free RAM after install all application that I need. So hard download from Mediafire Lol..................
Have finished download, and now I'm using your ROM and add all Apllication ( and games too ) that I need. About 14,55 Mb Free of RAM and only have 651,71 Mb Free of Storage. Cool..............
Downloaded!!!!
how to install this .DIO file
Shoaib.Khan said:
Downloaded!!!!
how to install this .DIO file
Click to expand...
Click to collapse
Like Bajok! says :
HOW TO FLASH THE ROM:
1. You must have at least 70% battery.
2. Use mini-SD card and format it to FAT16 (use only 2GB capacity and below, don't use SDHC card!)
3. Copy AL1.DIO to card.
4. Insert card to memory slot of your device. Press and hold record button (beside the camera button) then push reset button with your stylus. Wait until BOOTLOADER mode appears saying "SD CARD DETECTED", release the record button.
5. Wait 'til it finishes until the O2 logo and splash screen appear. Follow the on screen steps. HAPPY FLASHING!!!
Thanks your ROM is very light, fast and battery usage is very good with this..
I surprised!! solved my problem for years on battery usage problems.
Just had to say thanks, sadly last week my old faithful HTC TYTN died, and i almost cried, and i had to get another PDA.
The one i got was an 02 Atom Life, however the stock rom wouldnt run some of the apps i use and depend apon, and couldnt do some basic stuff like send the USSD to get credit info (*100#), so i tried the official 6.1 update which still didnt run my app, or allow me access to my info, then i tried this Rom.
Everything goes again, (including USSD) ive tried your 6.5's but frankly I prefer this one alot much more, I just wanted you to know I appreciate your effort to the community.
The problem i have it they layout for the 6.5, do you have a 6.5 with the 6.1 Setup? If so i would gladly test it for you.
Regards
Andrew (New Zealand)
sastyh said:
Just had to say thanks, sadly last week my old faithful HTC TYTN died, and i almost cried, and i had to get another PDA.
The one i got was an 02 Atom Life, however the stock rom wouldnt run some of the apps i use and depend apon, and couldnt do some basic stuff like send the USSD to get credit info (*100#), so i tried the official 6.1 update which still didnt run my app, or allow me access to my info, then i tried this Rom.
Everything goes again, (including USSD) ive tried your 6.5's but frankly I prefer this one alot much more, I just wanted you to know I appreciate your effort to the community.
The problem i have it they layout for the 6.5, do you have a 6.5 with the 6.1 Setup? If so i would gladly test it for you.
Regards
Andrew (New Zealand)
Click to expand...
Click to collapse
I'm sorry, but I couldn't understand your last question... I beg your pardon?
Sorry, ill phrase it better,
with your WM6.5 roms i noticed they didnt have the standard start menu, like the WM5.0 / WM6.1, it instead your WM 6.5 has the touchflo type menu.
Is it possible to make a 6.5 rom without the touchflo ?
or can the touchflo be turned off so the old start menu works?
sastyh said:
Sorry, ill phrase it better,
with your WM6.5 roms i noticed they didnt have the standard start menu, like the WM5.0 / WM6.1, it instead your WM 6.5 has the touchflo type menu.
Is it possible to make a 6.5 rom without the touchflo ?
or can the touchflo be turned off so the old start menu works?
Click to expand...
Click to collapse
Yes... There're two ways that you could be able to use WM6.1-styled Start Menu, but both are not perfect neither:
1. Use the QuickMenu instead.
2. Recook a WM6.5 with a hexed shell32.exe file(by Sun_Dream in DFT) and other WM6.1 DPI and Lang *.dll files. I have just cooked one and that was under tweaked, but unfortunately my device broke again in the day before yesterday... So I'm afraid that you may have to cook it yourself.
My device is fixed now. I've got the thing you meant done, but themes of WM6.5 or later are not applicable for this ROM. The WM6.5 lockscreen and Titanium are not present as well...
So does anyone want to try that?
hi aa125690, been almost a year but this rom is fine!
I have a problem here =
1. when i flash the rom back to MWG original rom (.exe) through dsuu I can't find "wireless tab" under setting-connection-wifi.
2. same thing happen using original O2 wm5 or wm6 rom. no wireless tab inside.
I thought this was DSUU problem so I did =
3. using modified flash.dio as al1.dio from both original O2 rom (miniSD mode) resulting the same.
4. using modified flash.dio as al1.dio from original mwg rom (miniSD mode) resulting the same.
many hard-resets but they solve nothing. strange thing is = all rom from this xda-developer site (from you, bajok!, chrisch, etc, which are all minisd mode) are free from this problem. do you have any idea?
I just wanted to feel the "old feeling" when the atomlife was still on wm5 just like old time.
I'm really, really sorry if i posted this in the wrong section or what else.
I'm having problems using the Gen.Y dualboot system on my kaiser, I installed the CAB for the HTC Kaiser.
It works... but only when opening the bootmanager when Windows Mobile 6.1 is already booted, there is no way to first load the bootmenu from Gen.Y and then choose to boot Windows Mobile or Android.
The Android is installed correctly and the registry is set well to boot from the Andboot map on my SD card so there's no problem booting android.
It's just that the bootmanager doesn't startup when turning on the phone.
(I'm running Eclair 2.1g Polymod Light-Themed)
I hope someone can be of help and i really appreciate whoever even thinks of answering a possible solution.
Syntax1993