hi does anyone have hardware diagnostic tool for Hermes???
I suspect a hardware malfunction on my brick
It can't load any Radio ROM, when works only in OS (like PDA only) it hangs and goes off randomly, but not more after 15 min
Anyone
Can the problem be with coruppted battery?
when it is carged to 100% it works 15 min, hangs, hardreset, works, hangs and after 1-2 hours the battery is totaly loss 0%. can't start,reset ect.
Hi...
the way you are talking seems like a ****ed up battery, what rom are you using? Radio? try to use one of ur friends batt. if anyone around you have one, if the same problem is there change your Radio and Rom, i recommend TNT.SE, the Radio 1.54.30 is great, both are working fine with me, hope i helped.
I think it isn't battery because last time it hangs even on an external USB power supply
Current situation:
OS: some AT&T ROM (OS only- if I try any ROM with radio in it, all updates stop at 11%)
RADIO: none
still looking for Diag tool if any
if you were trying to flash on usb it wont work properly as it stops charging as it flashes. cheers...
Related
My WiFi is not working when I turn it on. When I turn it on, it just do nothing. I tried to run WLAN Module Test to check the problem using Self Diagnostics, sometimes it can detect the MAC address, means OK, but sometimes it shows error saying "GetAdapterInfo() return FALSE....".
For your info, I already reflash the updated ROM (0426), but it seems not working. Now, I'm using ATOM EXEC ROM (0721).
Can someone please help me before I send my ATOM to repair center?
You sure this isn't after an ActiveSync session? My device often needs a soft reset after a session.
Yeahhh... I'm very very very sure about this! Eventhough I didn't use Activesync, the same problem still happened.
I tried to downgrade the ROM, the WiFi still not working!
I have the same problem as idzilhafis.
Tried to run Self Diagnostic and got the same two answers, sometimes the module is correctly detected and somtimes not.
When the module is detected during the test, also the Access Point name is detected (I have a wifi AP at home), but the connection doesn't work.
When I use Wireless Manager, the module is not alwais detected and sometimes also the wifi button disappears.
Of course I flashed and re-flashed the firmware, using the original manufacturer's latest ROM and the "not for sale" version. Nothing changes.
May be an hardware failure?
I think, I can answer myself.
Yesterday in the evening I did put the Atom in the fridge for a while, because i noticed that using the pda and then increasing its temperature, the module was never recognized.
Using the pda after an hour of fridge (I did put it in a little bag), the wifi module works like a charm. It is ok until it's temperature raise again, then the module hangs.
Such a behaviour is typical of an hardware fault.
I think that this kind of problem is surely not due to a wrong use, and should be covered by warranty. But I don't know where to send it for service (I'm in Italy).
Any idea?
I had tremendous problems with my O2 Atom WIFI which would not connect to my laptop WIFI LAN Network. I asked O2 Technical People & Lot of people on this and other forum but got no perfect response.
Practically trying many options I by chance put back the old ROM upgrade of O2 2006123-45 and tried switching on the WIFI and lo and behold it worked fine.
Then I reload the new ROM 20060426 again and it works fine.
This proves that if you reload the NEW Upgrade ROM more than once it locks the WIFI.
No, it proves that any ROM upgrade can result in strange things, and reflashing either the same ROM or another ROM can fix it. It's well known with stuff like battery use (some users have had their standby time doubled by just reflashing the same ROM).
I sent to o2 expert and he don't know what to do. Tried to change registry, still not working. Tried to reflash, stillnot working. I think hardware problem. Don't worry, I still got warranty!
Hi All, I'm a newbie.
Pls shows me where can I download this oldrom O2 Atom 2006123 (-45)?
Or Who can give it to me through email: [email protected] ?
Help me pls, tks a lot
Hello,
yesterday i was flashing a new rom to my prophet and for some reason i got a bluescreen while doing it. and the process stopped at 60%
after flashing again without problems i face some poblems.
sometimes it takes 1 or more softresets for the cell to find my network.
wlan ist not working at all. i can find a present network but when i try to log in i allways get the message network unaviable.
i tried to install the original o2 rom that came with my device but i have the same problems
just that it finds the wlan network and as soon as i enter the password the complete call hangs.
so now i have the shadow "my edition" 2 rom on my phone but i cant get it running it goes till "tap the screen to set up your Windows..." and then nothing happens anymore
i can not even get to the bootloader the phone just does not boot when i hold any button during boot. only thing working it hardreset but that does not change anything
before i tried to flash a new rom i was using the "my edition" 2 rom and everything was working fine but now after the crash it does not work anymore
i managed one time to get it running compleatly but wlan did show the same problems as under othe roms
could it really be that i damaged the hardware durning my abortet flash?
can anyone offer some help how to fix this?
IT seems unlikely that you have damaged the hardware, but it is possible.
Can you enter bootloader? If so, disable connect through USB in activesync, connect the device, and run a NVID AKU 2.2 WM5 ROM. See if the problems persist with this.
Bought a T mobile HD2 (unlocked) second hand with energy rom installed.
Got it home & I find that the wifi & bluetooth are not working.
It picks up the network signal fine & the data connection is working fine.
But the wifi turns on & will not pick up anything.
The bluetooth it seems does not discover & is not discoverable.
I suspected it may be somthing to do with the rom so I loaded up a stock T mobile rom with the same results.
I have updated the radio with the same results.
The phone has Hspl loaded & I am wondering if I could do a complete cleanout of everything including Hspl & reload a completly vanilla stock Rom would that help.
I have fiddled with all the settings for both wifi & bluetooth & still no results.
At this point I need help!!!!
Run a task 29 then the stock rom of your choice, check the radio installed is compatable with the rom, hard reboot after completing the rom flash (its a good idea to do that first as well in case you don't need to run a 29 or flash)
johnerz said:
Run a task 29 then the stock rom of your choice, check the radio installed is compatable with the rom, hard reboot after completing the rom flash (its a good idea to do that first as well in case you don't need to run a 29 or flash)
Click to expand...
Click to collapse
I've the same problem ...I suppose.
I used a Touch Pro in the last two years and Energy ROMs since September 2009. I never had problems with Wi-Fi an Bluetooth.
Recently I bought a HD2 and tried Bloutooth and Wi-Fi only after 1 week.
So, both the Touch Pro and the HD2 got the same ROM (Energy ROM) flashed , each by its own version, but two days ago I discovered WiFi not working (DISCOVERED, because I never tried it before)
The problem seems an extremely poor signal seen on the on screen meter, only if I'm close to the router (1-2 meters!) I couldn't establish a real connection, because the HD2 loss the signal every 30-40 seconds.
Bothered about this I tried with Touch Pro: the result is the same!
So I concluded: "It's the ROM!". Strange (never had problems with Energy ROMs) but possible. I flashed the stock ROM on the HD2: the issue remains. So I thought about the RADIO, and I flashed the RADIO 2.12.50.02 (compatible with ROM). The issue is still here.
I used Task 29 before another flash, then I tried an Artemis ROM with RADIO 2.12.50.02... nothing changed. (note that I tried almost every different settings about Wi-Fi,from BsB tostandard enhance settings)
Last (related?) issue: when I try a hard reset, the progress bar starts to "move" but after 3-4 seconds (about a third of the bar) the bar disappears and I got the "Press VolUp button" message. Then the phone has the first boot... but I wonder if the HR is complete, because it seems yes.
Finally I came to this thread and... another doubt: what about BT?
I tried both the Touch Pro and the HD2 Bluetooths but they can't connect or recognize each other (every "Find" and "Visible" options activated)
I didn't try yet with Touch Pro (flash etc.) but I am very bothered and dubious about it.
Cooked ROM Energy Leo 1 Aug
OS version 5.2.23673
Radio 2.12.50.02
Operatore: H3G ITA
For every other info needed to give help... ask!
THANKS FOR HELP or TIPS
WIFI & Bluetooth
Thus far I have run task 29
Reinstalled a stock T-mobile rom
But no luck wifi & bluetooth still not working properly.
Decided to go right back to the very beginning & uninstalled HSPL by loading the stock Rom from the SD card
Stock rom would not upload & i am getting the SPL 1.42.0000 Screen plus "Upgrade Rom code error please try again"
The question I have now is which is the proper stock Rom for this T mobile HD2 & how do I find that out?
flinx said:
Thus far I have run task 29
Reinstalled a stock T-mobile rom
But no luck wifi & bluetooth still not working properly.
Decided to go right back to the very beginning & uninstalled HSPL by loading the stock Rom from the SD card
Stock rom would not upload & i am getting the SPL 1.42.0000 Screen plus "Upgrade Rom code error please try again"
The question I have now is which is the proper stock Rom for this T mobile HD2 & how do I find that out?
Click to expand...
Click to collapse
Sorry I can't help about this.
We are alone in this thread!
wifi & bluetooth
I think your right.
Ah well, at least I have a very expensive doorstop!
You are not alone. I am experiencing the exact same problem and have yet to find an answer.
Task 29 didn't help and reflashing the radio the traditional way (even with the stock rom) doesn't seem to overwrite whatever is causing this problem.
Would uninstalling the hspl do anything? I am running out of ideas.
Hi there. I have an Ipaq hx2110. Yes it's a very old machine
1 year ago I updated WM2003 to WM5. Worked, but sometimes freezed, and shutted down. Some days ago I couldn't turn ON. OS loading freezes at ~20%, PS FORMATTING at ~60% (fading out screen, and no react for reset or any button, only react for battery remove)
I tought maybe the OS corrupted, and tried to reflash. After done, same problem..
(hp software couldn't identify the version of current OS).
Tried to revert to original WM2003... WM2003 no reacts for any reset or anything.. Black screen.
Tried WM6.5... WM6.5 reached loading percentage 100% (very slowly), but freezed after. HARD RESET same problem in WM6.5 like WM5... freezing.
only PRE-BL mode working well
I think this problem maybe connected to internal battery, but I dont know how to charge or test it, because charging don't start on Pre-BL.
My girlfriend bring PDA to her work.. tried to switch on and format, and said: OS loaded ONCE succesfully, just unfortunately battery falled out from pda when she picked up to configure OS, because no back was on PDA.... I don't know how she did....
All ideas will welcome, and thanks for help
I have searched but can not find anything with a similar problem, so sorry if it has been covered. My HD2 will not reboot first time ever. if anything requires a reboot i have to remove the battery and wait at least 15-20 mins before rebooting otherwise it will hang, not always at the same place. I am running the stock 1.44 rom. tried to update to new 3.14 rom, using activsync method but phone hangs and i get a 264 communication error... Any thoughts