Hey I got a mogul I was trying to convert it to a cricket one using dcd 3.0.1 rom for cricket. Phone had already had latest sprint rom so i unlocked it I thought and loaded up dcd's rom. Rom was acting funny kept rebooting so in my attempts to fix I went from phone rebooting to just getting stuck at htc screen with dreaded no radio. So i thought try to flash 3.27 radio after reset phone is just dead just a black screen. Bootloader mode wont work. Can connect phone to computer and will connect as htc pid interface but screen is black will not boot. All i can get is a red light when i first plug it up but then goes out after so long somebody help me. thank you. Not a rookie but made a rookie mistake.
http://forum.ppcgeeks.com/showthread.php?t=20882
Related
I posted this in the Titan forum by mistake. Sorry for the duplication
I need some help...I'm freaking out...
I cooked a ROM with dcd's version 1.6.9 for BELL a few days ago and it was wonderful and worked great.
Today, I tried to upgrade to version 1.6.10 and I f___ed something up.
It starts the htc boot up screen as usual, then the Bell screen comes up as usual, then a Sprint screen comes up briefly and then the Windows Mobile screen comes on and HANGS........
I have tried cold reboots, and nothing. I cant connect to it with USB.
I can kick myself for making an error because I was rushing......
Can anyone please help............................
Edit/Delete Message
koilmaker said:
I posted this in the Titan forum by mistake. Sorry for the duplication
I need some help...I'm freaking out...
I cooked a ROM with dcd's version 1.6.9 for BELL a few days ago and it was wonderful and worked great.
Today, I tried to upgrade to version 1.6.10 and I f___ed something up.
It starts the htc boot up screen as usual, then the Bell screen comes up as usual, then a Sprint screen comes up briefly and then the Windows Mobile screen comes on and HANGS........
I have tried cold reboots, and nothing. I cant connect to it with USB.
I can kick myself for making an error because I was rushing......
Can anyone please help............................
Edit/Delete Message
Click to expand...
Click to collapse
Try the hard reset.
If that doesn't work then try the bootloader mode and reflash it.
Hard reset
Hard reset did not help, it hangs on windows mobile screen.
Can u give me a bit more detail on how to get into the bootloader mode?
I figured it out. You have to but it into bootloader mode by pressing the POWER and CAMERA buttons at the same time and then reboot.
Then load ROM as usual'
Thankyou
You are the fing master. OMG mine was in the EXACT situation and i was freaking out. its currently reloading the ROM back on. Thank you soooooo much.
it probably happenned because modules overlapped, run g'reloc before building to avoid this.
First off, I've been flashing my phone for almost a year now. So I don't consider myself too big of a noob. I loaded scrosler's round 4 rom. Worked great! Until I did a soft reset. It put the phone in bootloader mode and I can't boot up at all.
Here's what I have:
Olipro SPL 2.40
Radio 3.42.50
Here's what I've tried to get it out of bootloader:
mtty1.42.exe
titan_exitbl.exe
No success. I'm able to install a ROM, but as soon as it reboots after 100%, it goes right back into bootloader.
Someone please tell me it's not bricked
Try reflashing your radio.
BTC
kill the active sync processes via the task manager, then put the phone back into the usb cradle, run the titan exit bootloader and it should work.
josh77b said:
First off, I've been flashing my phone for almost a year now. So I don't consider myself too big of a noob. I loaded scrosler's round 4 rom. Worked great! Until I did a soft reset. It put the phone in bootloader mode and I can't boot up at all.
Here's what I have:
Olipro SPL 2.40
Radio 3.42.50
Here's what I've tried to get it out of bootloader:
mtty1.42.exe
titan_exitbl.exe
No success. I'm able to install a ROM, but as soon as it reboots after 100%, it goes right back into bootloader.
Someone please tell me it's not bricked
Click to expand...
Click to collapse
If no other suggestion works this will... But it sucks.... Flash a stock rom. I garuntee that will fix the problem. then just flash back. You don't have to flash a VZW ROM and I recommend against it. My new recommended ROM for unlocking and flashing is the Alltel ROM. Its got the latest radio in it (which you already have). Good luck and let us know how it turns out.
thanks for all the suggestions. i'm not sure what exactly went wrong, but i spent about a day and a half just to get it working again. it's somewhat stable now.
after flashing an older dcd rom, i was somehow able to get the OS to boot up, even after the auto soft reset. immediately i wanted to upgrade the bootloader to 2.47 since i've only found it in an exe(only can run from windows mobile) version. I then was able to flash the OEM MR1. Which automatically downgraded my radio. it was definitely the most stable thing i've flashed since the phone got all screwed up. i could soft reset as much as i wanted and didn't get the blue screen of death aka bootloader.
but of course, i couldn't be satisfied with no gps and no internet sharing. i use internet sharing more since i use it when i commute to work on BART (bay area's version of the subway) 50 min each way.
so now i'm on DCD's 3.2.6 ROM with 3.42.50 radio. so far it's somewhat stable. if i soft reset, i get the bootloader sometimes. but a couple solutions to the get the OS to boot back up is
1.) take the battery out for 20-30 seconds and power up
or
2.) take the battery out, plug in the computer usb or power usb with the battery still out. somehow resets the phone? i have no idea.
but i read somewhere that ROM's were causing people to have to take their battery out for 30 seconds to boot up. I doubt it was DCD's ROM's. But who knows, maybe i ran a bad radio file, ROM, or bootloader upgrade, that really caused the initial issues.
My only issue now other than getting the bootloader once in a while is that GPS isn't working. Not that big of a deal for now since I have the Pioneer AVIC F90BT in my car now. but would be nice to have it on my phone (tomtom & google maps) for that one time that might come up when i really need it and i'm not in my car.
again thanks for your help in trying to help a brotha out.
Verizon xv6800 bootloader and startup issues
My issues are, I cant get into the bootloader screen no matter what I try(power, camera and reset). Most times my phone will only go to the verizon screen and then just go white, other times, it may show the WM 6.5 startup screen and the freeze there. This all came from me trying to install WM 6,5 Beta 5 21159 rom from WM 6.1. On another not, my pc will not see my phone. So am I completely screwed? Is there any hope? Thanks in advance for any help.
So, overall, am I screwed?
Anybody have any suggestions?
Thanks
Can anyone help? my phone will not let me into bootloader mode or even startup past the verizon splash screen. I am desperately hoping that its not bricked. Also, the pc to phone usb connection will not see eachother.
My phone will charge via the usb cable to pc. When the wifi switch is turned on, the led on opposite side of the power led will do it green blinking.
Is there anyone that has time and is willing to work with me?
Thanks in advanced.
I have taken the phone apart so that I could push the internal buttons (power, camera and reset) to see if the outer shell buttons were the problem. They werent. I also still can't get past the verizon splash screen. Anyone have any ideas?
Thanks
I you cant get into bootloader you dont have any options.
Can someone please help me? I tried flashing a new rom to my phone and now nothing works. I installed the hard spl to unlock the phone. I then installed a rom update utility. When I flashed to the new rom I screwed up and did it while the phone was on the today screen. Now the phone just vibrates and says TOUCH pro then shuts off. It keeps repeating this. Now the active sink says it cannot connect with the phone. I don't know what I can do now, or if a completely screwed up my phone. It is brand new and never even been activated. please email me at [email protected] if you can help me.
Thank you,
Mike
sounds like you need to do some reading... flashing from the today screen isn't a problem, just gotta have an activesync connection.
put your phone into bootloader mode, and then flash a stock/shipped ROM that is meant for phone. since you've got a cdma pro i would suggest making sure you're flashing a cdma touchpro ROM.
ppcgeeks is a little more geared toward CDMA phones than here on xda
Hello, I have an unrooted Hero from Orange (Spain) that enters in a boot loop. I have tryed everything to restore it but with no success. In the hboot menu it says "touch panel-fail" and even if I flash again the original rom from the hboot, it still gets in a boot loop.
First of all I will explain my case.
I had the Hero rooted, with custom roms etc, but when I bought a Nexus One, I gave my Hero to my brother. In September he told me that the official 2.1 had arrived to the Hero, so he wanted it instead of a custom rom, so I just proceeded to do so. I created a GoldCard, installed the 1.5 RUU of WWE, made the two OTAs and all OK. The last week (I think) he received a new small OTA, he updated successfully. My brother went to sleep with the Hero almost charged, but when he woke up, the Hero was off. Then, when he turned it on, and after a while (15mins or so) the Hero finally boot up, but the touchscreen wasn`t working and using it with the trackball the Hero was always prompting FC of android.process.acore (every 2 seconds more or less).
After watching that, I installed the official 1.5 of Orange hoping that it will fix it, but no way. Now it gets stuck in a loop while booting after the Orange bootscreen.
I tryed again to flash the WWE version, but with my old GoldCard doesn't seem to work (incorrect cid) and not being able to boot it up, I cannot create a new GoldCard or even root it.
I have tryed a lot of fastboot comands but I can do just little things because for the most useful things I need root.
Other thing that might be good to know is that when I plug the power to the Hero nothing happens, the led is not turning on, and I don't know how much battery I still have. Thank goodness that the battery was full before I moved the Hero to this infernal boot loop.
Please I will be so thankful if anyone can help me or just giving me any clue about how can I fix this.
I had the same problem on a refurbished hero I had. It had touchpanel fail in hboot and was in a constant loop.
I managed to get it to boot into android once by installing the ruu while in fastboot mode, however the touchscreen did not work and when I rebooted the phone it went back to the loop.
I sent the phone back for a replacement. If u check my previous threads ull see the thread icreated. In it I said that it had worked as that was when it finally booted but before I realised the sgreen didn't work
Sent from my HTC Hero using XDA App
Thank you for your reply, I will check your posts when I arrive home this evening.
hi.
I had the same problem and solve it by flashing this rom (goldcard needed)
http://shipped-roms.com/shipped/Her...io_63.18.55.06P_6.35.15.11_release_signed.exe
Hi guys,
I successfully flashed Android to my HD2 a few months back. I used what I believe is Cotulla's rom(?). However the other day my phone sorta died and whenever I plugged it into the charger it would vibrate go through the boot screen and reset at the "1234 go go go" stage. I read some reading on the forum and flashed it back to "RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship" from the HTC website, using the SD card. Windows mobile restored the phone and I started using it again.
I tried to put android back on it and I think I unsuccessfully tried to update the radio after which the phone sorta died again. So I thought ok, no problem, lets get back to windows again. So I installed the HTC rom again through the SD card, which the screen told me was successful. But now I can't get the phone to boot or go into bootloader or anything. When I plug the charger in, I get a vibrate and HTC bootscreen, with the red writing at the bottom left and then dead to only do this again and again. If i pull out the charger, the phone just dies. Battery charge was about 50% when it died.
Any ideas or help on how to resurrect my beloved HD2 would be greatly appreciated!
*quick update*
I stuck the phone in the fridge for a while and managed to get it into the bootloader just once and flashed the official winmo rom again, which was successful but still dead phone!
What made you decide to stick the phone in the fridge??
What is your SPL version??
mentalityx said:
What made you decide to stick the phone in the fridge??
Click to expand...
Click to collapse
Probably the dozens of threads that talk about successfully flashing only when the phone has been cooled.
@op it doesn't look good. Usually the fridge trick working implies hardware overheating issues.
Just confirm please, its not a tmous right?
Samsamuel is right, i just read about it and thought hey, why not! plus it got a priceless look from the mrs! lol
It's definitely not TMOUS, its UK Virgin and the SPL was 3.03.0000 if I recall correctly.
When I cool it, I can get it into bootloader, but only once.
well, i still suspect its hardware and unfixable, but there have been cases where for whatever reason a rom suddenly seems to fix it. Try all the versions of the correct stock Rom.
Try the 1.43 the 1,66 and again the 3.14, wwe ones, chilling the phone well before each flash, a good 20 mins.