Hi.
is my friend k-jam brick?
It s kind of g4.
But he is upgrading her pda with g3 rom.:
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
And after install new rom widows boot up then its restart after customize.
The pda after restart not power on and not go to bootloader screen
Please help us.
please help!!
saeed31861 said:
Hi.
is my friend k-jam brick?
It s kind of g4.
But he is upgrading her pda with g3 rom.:
CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
And after install new rom widows boot up then its restart after customize.
The pda after restart not power on and not go to bootloader screen
Please help us.
Click to expand...
Click to collapse
Sry ! its a "BRICK"
Flashing a G3 rom with IPL/SPL (Bootloaders) will certainly Brick a G4 device.
any body can repair this problem without board replace.?
no, it at least requires replacing the DoC chip.
Related
My Wizard Flash the G3 IPL/SPL, How to wakeup it?
gzDragon said:
My Wizard Flash the G3 IPL/SPL, How to wakeup it?
Click to expand...
Click to collapse
You need to be clearer.
1.) Is your device a G3 or a G4 chipset?
2.) If you flashed a ROM with the IPL/SPL information for the wrong chipset, you may have bricked it.
3.) Is it CID unlocked? If so, flashing a ROM on your device may have bricked it.
Please give us more detail about what it's doing.
If you have truly bricked it (made it totally unusable), your only option may be to send it in for repair/replacement. If not, there may still be some hope.
It appears that English may not be your primary language. If this is the case, I HIGHLY recommend getting some personal assistance in understanding the information provided by the person who provided the ROM.
DON'T EVER FLASH A ROM IF YOU DON'T UNDERSTAND THE INSTRUCTIONS 100%!!!!!!
If you think you just have a feel for it, go back and re-read it until you understand!
That having been said, WELCOME TO THE COMMUNITY!
We all help as we can.
I confirm it is cingular 8125(Wizard 100) is G4 chipset. Befor i flash, IPL/SPL is 2.25.0001. I may have bricked it!
Thanks!
yes, it's definitely bricked. Never flash a G4 with a G3 ROM. Check ur Private Message.
i have the self problem with my xda mini s, before was an G3, then i have updatet to G4, if bricked, .... nothing if
plzz help
i have bricked my qtek will updating, there is any way to turn it on..
plz help me..
If you flash the G3 ipl/spl to a G4 wizard.I'm sorry to say that your Wizard is broken .Are you in china now ,if you in china,you can change the brocken chip .it's cost 400 RMB.
I flashed a ROM with G3 IPL/SPL to my G4 and was able to recover by cooking my own ROM.
please can you share ur cooked rom with us please?
I would be happy to. However, all I did was followed the tutorials found on this site, and cooked it using the WWE off htc's website, stripping the IPL/SPL.
hi to all and sorry for my english..
my wizard after upgrade to wm6 its stuck to bootloader screen with IPL: 2.17/SPL: 2.20.0001
what can i do ????
thanks .
Gus
Get yourself a copy of Wizard Love from here. Plug your USB cable in and make sure you can see the word USB in the corner. Then just double click the Wizard Love rom and stumble your way through the italian instructions.
Good Luck
thanks for quick replay.
download and try
nop i got the same screen
Did the Wizard Love rom flash successfully?
yes!
it is dead
how downgrade my SPL?
What do you mean it is dead?
Are you able to get to the Bootloader screen? The multi-colored screen?
stack in 3 colored screen .. when i going to put ruu e.x Wizard love , after reboot it stack again to the same 3 colored screen
Sorry again for my english
Then you need to get a copy of your original ROM and flash it.
G4 does not have any SPL that can be downgraded.
If my wizard is G3 and i go to put it a G4 soft.? where i find the original , because i get the newest version from @CE and the message i get is (get a newest rom) I make a big big @$*!%@#
tnks 4 your time..
no one to help ?
cbr_600 said:
no one to help ?
Click to expand...
Click to collapse
You have a G3 IPL and a G4 SPL.
That means your device is a shure brick
The is no way to recover from this unless you replace the mainboard.
wana hellp brother about my k jam i m trying to ulocking cid locks but my k jam is dead last time is multy color screen come to startup screen after that my pocket pc not working itz tolty dead plz hellp me what can i do thanx i m waitng ur reply take care Allah hafiz Bye
hi all friends
hello all,
its posible install android 4.0 in htc titan X310E
window 7.5 boring plzreply me if its posible
PLEASE IF SOMEONE HAS A SOLUTION FOR THIS... HELP ME
I INSTALLED THE CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE TO MY G4 WIZAD... I KNOW WHAT IT MEAS BUT THERE MUST BE A SOFTWARE SOLUTION.... PLEASE HELP IF YOU CAN...
What i did was to install CUSTOM__RUU_Wizard_1050412_WWE_101_11210_ NK.NBF file via soft spl method...... i repeat i know now what i have done ( installing G3´s IPL/SPL into a G4 ) but if someone has a software method for fixing this problem please HELP.....
information is your friend, post EXACTY what you did and EXACTLY what the phone is doing now.
AYALA445 said:
PLEASE IF SOMEONE HAS A SOLUTION FOR THIS... HELP ME
I INSTALLED THE CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE TO MY G4 WIZAD... I KNOW WHAT IT MEAS BUT THERE MUST BE A SOFTWARE SOLUTION.... PLEASE HELP IF YOU CAN...
Click to expand...
Click to collapse
The CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE only has G3 IPL/SPL.
This means that if you forced the SPL OR IPL on the phone, you have bricked it.
Block sizes from a G3 are different from the blocksizes on a G4, so you won't be able to flash the correct IPL/SPL back to the phone iusing any software method.
Only method which "could" work is the still unavailable JTAG method.
But because the Omap 850 datasheets (complete datasheets, not the simple block diagram) aren't available, it's impossible to find the JTAG pins.
AYALA445 said:
PLEASE IF SOMEONE HAS A SOLUTION FOR THIS... HELP ME
I INSTALLED THE CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE TO MY G4 WIZAD... I KNOW WHAT IT MEAS BUT THERE MUST BE A SOFTWARE SOLUTION.... PLEASE HELP IF YOU CAN...
What i did was to install CUSTOM__RUU_Wizard_1050412_WWE_101_11210_ NK.NBF file via soft spl method...... i repeat i know now what i have done ( installing G3´s IPL/SPL into a G4 ) but if someone has a software method for fixing this problem please HELP.....
Click to expand...
Click to collapse
I think you can try this if your phone still can get into bootloader mode, i got mine fixed this way hehehe.... good luck man
here is the link to my post in the forum:
http://forum.xda-developers.com/showthread.php?p=2159021#post2159021
goodluck
I upgrade a ROM by softSPL, after that my qtek in not responding. I Can not to switch it on.
Is there any chance to repaire it???
Please help me.
Thank you so much.
---------------------------------------------------
Qtek 9100 WM5
2.17.0001 IPL/SPL
this is all what i know.
Maybe you flashed a ROM with G3 IPL/SPL to your G4 Wizard.
In that case, it is a brick and there is no known method to recover unless replacing DoC Chip or mainboard.
dravidek said:
I upgrade a ROM by softSPL, after that my qtek in not responding. I Can not to switch it on.
Is there any chance to repaire it???
Please help me.
Thank you so much.
---------------------------------------------------
Qtek 9100 WM5
2.17.0001 IPL/SPL
this is all what i know.
Click to expand...
Click to collapse
Take out battery for 5 minutes and then try again to boot it.
Also try if you can get it into bootloader ....but after each procedure take the battery out just to make sure it's not frozen.
If ur device is G4 then make sure u not flashed with G3 tools
thank you so muc for you help. Today morning I was at service and the technican helped me. My main desk in MDA was dead. Service changed the MDA I so happy because I have a new MDA.
My MDA have a gwaranty.
dravidek said:
thank you so muc for you help. Today morning I was at service and the technican helped me. My main desk in MDA was dead. Service changed the MDA I so happy because I have a new MDA.
My MDA have a gwaranty.
Click to expand...
Click to collapse
nice news
but did u mean they changed the whole device or only the dead desk?
and u may ask them about jtag pins of wizard's cpu (omap850) , i will appreciate it
lmd0990 said:
nice news
but did u mean they changed the whole device or only the dead desk?
and u may ask them about jtag pins of wizard's cpu (omap850) , i will appreciate it
Click to expand...
Click to collapse
they changed dead desk only.
Hi guys,
my brother gave me his old mobilephone yesterday. He told me that he hasn't flashed it.
There ist the old WM 5.0 on it, so i want to flash a new rom. I read some turorials which told me that it is difficult to flash a G4 Wizard.
Now the problem : when i start the mobilphone it shows me : IPL 3.08.001 & SPL 3.08.001.
Is it true that i can't flash it with this versions??
Can I downgrade them?
Thanks for yout answer!!!
Rammi
hello Rammi
rammi081 said:
Hi guys,
my brother gave me his old mobilephone yesterday. He told me that he hasn't flashed it.
There ist the old WM 5.0 on it, so i want to flash a new rom. I read some turorials which told me that it is difficult to flash a G4 Wizard.
Now the problem : when i start the mobilphone it shows me : IPL 3.08.001 & SPL 3.08.001.
Is it true that i can't flash it with this versions??
Can I downgrade them?
Thanks for yout answer!!!
Rammi
Click to expand...
Click to collapse
hello there, in fact i have helped a friend to flash his WIZARD with the same IPL/SPL as yours.
So it worked 4 him, i hope you can flash yours as well
by the way if planning to flash remember to have a full battery charged
hello Rammi
rammi081 said:
Hi guys,
my brother gave me his old mobilephone yesterday. He told me that he hasn't flashed it.
There ist the old WM 5.0 on it, so i want to flash a new rom. I read some turorials which told me that it is difficult to flash a G4 Wizard.
Now the problem : when i start the mobilphone it shows me : IPL 3.08.001 & SPL 3.08.001.
Is it true that i can't flash it with this versions??
Can I downgrade them?
Thanks for yout answer!!!
Rammi
Click to expand...
Click to collapse
hello there, in fact i have helped a friend to flash his WIZARD with the same IPL/SPL as yours.
So it worked 4 him, i hope you can flash yours as well
by the way if planning to flash remember to have a full charged battery
thanks 4 your answer tigrisimo!!
Do if you have flashed a G4 ROM??
Is it sure that the 3.08.001 tells me, i am having a G4?
Tomorrow i am going to flash my mobilphone
you can flash your G4 Wizard without almost any problem if you follow the instructions correctly. Remeber to use only custom rom without IPL/SPL or you'll endup with a paper weight. HardSPL is not safe as far as I know, only SoftSPL.
good luck!
great!
rammi081 said:
thanks 4 your answer tigrisimo!!
Do if you have flashed a G4 ROM??
Is it sure that the 3.08.001 tells me, i am having a G4?
Tomorrow i am going to flash my mobilphone
Click to expand...
Click to collapse
first read all the manuals you can find on this site, if need assistance tell me!
just one more thing:
get a beer, or a cig, coffe perhaps, because the procedure is going to take about 7 mins (depends on your Computer) dont worry, if the flash procedeure stops at 99% relax, is pretty normal (it will finish in some more secs)
GOOD LUCK
Yeees it run!!!
I just did it how it is discribed in the tutorial.
Thx board!!
by the way, i was brewing a cup of coffee when the mobilephone was flashed. I came back and everything was done