Hi, it's possible to change language (flash a rom) on a m600 G4 with cid locked?
Yes, use SoftSPL or better HardSPL!
Related
I used it to unlock my SDA and change to Dopod ROM (require CHT support) without any problem
just wondering, can I use same tool to SIM and CID unlock 3125
also, can anybody post Dopod S300 ROM?
mingkee said:
I used it to unlock my SDA and change to Dopod ROM (require CHT support) without any problem
just wondering, can I use same tool to SIM and CID unlock 3125
also, can anybody post Dopod S300 ROM?
Click to expand...
Click to collapse
Unfortunately, it doesn't go as easy as with the Typhoon-Type devices (such as the SDA)
Presently, there is afaik only this possibility.
http://www.imei-check.co.uk/f600unlock.php
Cheers
hrb
HI everyone,
I wanna know if anyone with bought a HTC Tytn to tmn (cellular phone operator in Portugal), has done a upgrade to his Htc Tytn ?
And if yes! What rom did you use it? Is it working perfectly with the tmn operator for phone proposes?
Another question, I read the FAQ's but I didn't get this part very well, if I upgrade my Htc tytn that has a portuguese rom with bootloader 1.04 to another rom (in english) with boot loader 1.06 .. to downgrade I need the portuguese rom or can I use another rom but with boot loader 1.04?
Just to mark it, there isn't any portuguese rom available at the moment
vador said:
if I upgrade my Htc tytn that has a portuguese rom with bootloader 1.04 to another rom (in english) with boot loader 1.06 .. to downgrade I need the portuguese rom or can I use another rom but with boot loader 1.04?
Click to expand...
Click to collapse
You need a portugese ROM with 1.04 bootloader, which as you said is not available. I'd suggest you to CID unlock (make device SuperCID) before going to a ROM with bootloader version different than 1.04.
Through research of different posts I have determined that I have a CID unlocked G4 model. I have a Qtek 9100 with MW 5:
Ipl 2.17.0001
Spl 2.17.0001
Gsm 02.07.10
Os 2.17.7.2
I was hoping to find an easy way to upgrade to WM6 and install the new touch applications. Does any one have any suggestions on which WM6 rom to install. Everything on my wizard is original programming except I have added PHM registry editor.
Your help is much apprectiated
There is no easy way... Are you sure your G4 is CID Unlocked? ALL G4 are locked in factory and the only way to unlock them is via imei-check website. You can use ShellTool to flash any WM6 here in the forum (I recommend NBD 7.4 for the touchflo apps).
As soon as you keep a copy of manufacturer RUU for your Wizard, you can flash any ROM you like using shelltool (Unlocking not required, but never using RUU to flash unless it is a manufacturer RUU)
dferreira said:
There is no easy way... Are you sure your G4 is CID Unlocked? ALL G4 are locked in factory and the only way to unlock them is via imei-check website. You can use ShellTool to flash any WM6 here in the forum (I recommend NBD 7.4 for the touchflo apps).
Click to expand...
Click to collapse
Actually...All Wizard are locked in factory
I have Qtek s200 G4 from swisscom at German language. I want to change language to English but I can not to install any ROM. My CID is locked.
IPL: 2.15.0001 (G4 device)
SPL: 2.15.0001
Can you help me please?
do the hardSPL..
check out "how to upgrade into wm 6 for prophet..
I tray to do SoftSPL Flash but I have extend rom. At direction wrote :
G4 Safe means:
-No IPL/SPL and no Extended ROM.
I fixed my problem with HardSPL
Newbie ? What is CID unlock? Do I need to do it to my Cingular 3125 before I can install WM6? Thanks
CID unlock
I am a newbie as well, however with the advice on this forum I was able to upgrade my startrek to WM6.
You must do a cid unlock - thanks to this your phone will be taking on the ROMs which are not made by the official sources.
How to do it - look for it better in the forum, and use the older version of the unlock program!
Just for information: It is not necessary to do the CID Unlock for every WM6 ROM. Erofichs ROMs for example can be flashed without a CID Unlock. I also flashed my StrTrk withot CID Unlock but I know that GnattoSplat Roms always need this way of unlock.
Sooo.... What is it, and why would i unlock my Qtek 8500? I already have 6.1 on it...
_JAAWA
CID = Carrier ID
When you CID unlock, you are making the phone so its not "locked" to a specific carrier's rom. By doing a CID unlock, you could flash a Cingular 3125 official rom on a QTEK 8500 for instance.
As stated, some (all?) of the cooked roms here are not carrier specific, so CID Unlocking appears to not have to be done. Personally, for what little time it takes to do this, just do it and you won't have to worry about flashing a rom and it not working becuase of carrier info.
NOTE: CID unlocking is different than SIM unlocking. SIM Unlocking is what allows you to use any SIM in the phone. CID unlocking is just for flashing different carrier roms. YOu can be CID unlocked and run a different carrier's rom, but if you aren't SIM unlocked, you can't use their SIM... (hope thats clear).
qtek 8500
so is the qtek 8500 from expansys CID locked?It is sim unlocked...
I flashed my Qtek 8500 with Gnats ROM without CID Unlock, Just for Information!
I'm using dopod s300 which is not sim locked.
do i have to registry unlock and cid unlock before i flash to wm 6.1 rom ??