Hi Guys,
i try this file from forum to upgrade my S200 however after restart my PDA its not working at all on my PDA not working.
can any one tell me how make it back to normal?
wm6wwerus17217v2.rar
Qtek S200 is not a wizard device,its a Prophet device,post in the Prophet sub-forum.
If he took a ROM from this forum and managed to crash the phone i'm guessing he bricked it.
if he did as you have said mestrini, then more fool him. Alarm bells should have rang when the image of the device on the splash screen on his pc ,looked nothing like his device. I think its just eagerness to try, or maybe a belief that any problem can be fixed. Either way it will be a hard lesson learn't
Related
I wanted to update my imate jamin with gullum Prophet touch on this link http://forum.xda-developers.com/showthread.php?t=323013
Was doing my 1st step as described i got some error, so i use Shell tool to upgrade but after upgrade my phone got stuck on imate intro screen, then i tried to upgrade through Official rom but it even didnt worked please help me my phone is dead.
http://forum.xda-developers.com/showthread.php?t=328324
Happens frequently ...
Please, even in trouble, first check existing threads instead of creating a new one. Difficult to find anything anymore.
Maybe this thread already been posted, please help me!!!
I took Qtek S200 used one, and the old host said he had problem with upgrade. I can't upgrade myself, and give it to master, master can't solve the problem, but when I came back and put it to upgrade with "220734 WWE ship" version it did well and I had working device for week, then it freesed once more, since I can do nothing. initially it has IPL 2.09.001 and SPL 2.20.0001, I did the program posted here - IPL upgrade and now I have IPL and SPL 2.20.0001. Phone enters bootloader normally, upgrade only with "220734", others doesn't go. When I switch it in normal mode it freeses as white screen on "Windoes mobile" screen, sometimes it goes further but final picture one - freesing.
Wait for Your advices.
P.S. In my city no official cervice...
Try a different ROM...
Put the device in bootloader,disable connect through USB in active sync, and run the RUU from a different ROM...
Hi guys!
Apologies if this has been posted before, but I've scoured the forum in vain. Please point me to an existing thread if there is one!
I just tried upgrading my Wizard G4 to TNT5.0 TouchFlo and it didn't quite go to plan...
I was trying out this method and it got all the way through and told me it had finished, but there was some message on my device screen, I can't remember what it said - something about a file not being found or something. It wasn't the one mentioned in the instructions, so alas, it didn't twig and i reset my device
Now I can't get it to go past the screen with the O2 logo and the ipl/spl info. I downloaded Wizard_Love ROM but I can't get it to work. When I reset the phone, the computer does pick it up as a USB device, but as soon as the IPL/SPL text appears, it disconnects again (according to the tone from Windows) so I don't have a chance to run the app.
Any help would be greatly appreciated.
Thanks in advance.
J
Anyone? Should I just buy a new one?
The ShellTool method is deprecated and should not be used any more as there is high possibility to fail...
You should now get the Original O2 WM5 ROM to restore your original WM5, then use HardSPL or SoftSPL to flash WM6.
I installed the Prophet_ShadoW_2.0_CE and now my Orange SPV M600 turns on the bootloader screen only please guys help me
Did you read the Upgrade guide which is the 1st sticky on this page ?? If you didnt just do it
You should know 1st what device you have G3 or G4 (when you read the guide you will know)
Then you should hardspl your phone and then your ready to flash your device with the preferable rom you want to.
After the flash you should hard reset the phone and your done.
If you dont understand some staff like hardspl or hard reset .... just read the quide.
Good luck
Make Sure You Don't Flash G3 On A G4 Device...you Will Brick It...think 1000 Times Before You Click
I have a G4,i downloaded NVID.EXE and ressurected it,now my phone appears as a qtek s200 now should i go on and try to upgrade to wm6 again or should it brick again?
You forgot to HARDSPL.
DO it first. After that flash the ROM again.
You will need to hard SPL before you upgrade! Make sure you use a G4 HardSPL or you will permanently brick your device.
But thats what i dont understand.How can i hardspl?I read the guides and its so complex.I got the G4 .nbf and used the G4 ROMUpdateUtility_NV_G4.exe and it did update.Now i am trying again the wm6.1
i wish someone could point me to the right direction cause i feel lost in here...
Use Prophet Tools (link in my signature). Go to the "HardSPL" Tab, select the radio button at the top called "G4" and then click "HardSPL".
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
mahi58 said:
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
Click to expand...
Click to collapse
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Thanks
bikertibi said:
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Click to expand...
Click to collapse
Thank you very much, my problem solved using the WM5 flashing process.
I thought it's impossible to get the phone connected to PC because activesync wasn't establishing a connection to the phone, but obviously I was wrong.
After flashing WM5, I performed a HSPL on the phone, and then used the file again, and the phone was upgraded to WM 6.5 with no problem.
I previously had downloaded your 6.5 ROM from a crappy forum, which was only including a download link and some useless info, and since I was a newbie myself D), I didn't even know that I should have performed a HSPL before upgrading the OS.