Hi guys i just got my wizard and i want to put a new rom on it. I already did the hardspl to unlock it. I also downloaded the wizard service tool. When i click on the rom i want to get it downloads and then asks if i want to run it, so i click run. I then click next a few times and it goes to the loading bar screen. It will then say error 300. I have no clue what to do now??
WOOT nevermind guys i somehow figured it out and i got the new rom flashed on my wizard.
Related
i started from the stock rom and started to update everything...im not exactly sure how i did this, but when i turn on my phone it goes straight to the spl-1.04.0000 RGBW screen....obviously i cant connect with activesync but my computer does see it because when i try to install other spl or roms or whatever it will start but stays at 0% and gives me an error....any suggestions???.....would be greatly appreciated, thanks in advance
What ROM do you have right now....did you attempt to load the Hard spl prior to doing anything else.
stock rom for VZW....i tried to do the hard spl and something went wrong during that process
colton1118 said:
stock rom for VZW....i tried to do the hard spl and something went wrong during that process
Click to expand...
Click to collapse
Um, flash back on the stock ROM
( http://ppc.stoleyour.net/oems/GetBackToStockXV6800.zip )
then follow my guide (see signature)
ha i got it to work....for some reason if i let it sit on the usb too long it wouldnt let me run the RUU ....so i put the stock rom in the RUU folder....brought it up...hit next once...then hooked up the usb and when i heard the first beep, i proceeded to start the update and it worked!....i am in the process of loading the stock rom at the moment....would u like to tell me what steps to take to install the new radio and new rom?....i had no problems until this new radio came along...thanks in advance .....now i think im gonna have to call and get a new a-key again
colton1118 said:
ha i got it to work....for some reason if i let it sit on the usb too long it wouldnt let me run the RUU ....so i put the stock rom in the RUU folder....brought it up...hit next once...then hooked up the usb and when i heard the first beep, i proceeded to start the update and it worked!....i am in the process of loading the stock rom at the moment....would u like to tell me what steps to take to install the new radio and new rom?....i had no problems until this new radio came along...thanks in advance .....now i think im gonna have to call and get a new a-key again
Click to expand...
Click to collapse
As I said, read the tutorial linked in my signature. It will make your life a hell of a lot easier in the long run. Everything is all there, in one easy place.
thanks i will make sure to read it carefully
The other day I flashed a kitchen to my phone. The flashing process went smoothly and after the DL the phone restarted and then froze on the startup screen. I reflashed another rom and it worked fine. When I tried to flash another Kitchen, the phone froze again at startup. Is anyone familer with this issue or can help me figure out what is wrong?
Weapondrift said:
The other day I flashed a kitchen to my phone. The flashing process went smoothly and after the DL the phone restarted and then froze on the startup screen. I reflashed another rom and it worked fine. When I tried to flash another Kitchen, the phone froze again at startup. Is anyone familer with this issue or can help me figure out what is wrong?
Click to expand...
Click to collapse
well a kitchen is what is used to cook a rom so you shouldn't try to flash a kitchen to your phone. You use the kitchen on your pc to make a rom and then flash the .nbh file to your phone
thanks. It was misleading since after I chose the programs the RUU started up asking me to connect my phone.
and of cause only flash roms made for your device
one can't use roms made for other devices
it can kill the device if one try
Weapondrift said:
thanks. It was misleading since after I chose the programs the RUU started up asking me to connect my phone.
Click to expand...
Click to collapse
What carrier do you use? If you have verizon, Scott Crosler released a bulletproof rom. It can also be used on Sprint phones, but you'll need to add an MMS cab if you plan on texting.
Here is a link to the ROM: Click Here
There is also a link to his forums on that page where you'll find all the help you need.
As per the title... enjoy everyone
http://giesecke.tk:8090/privat/topa...&download=RUU_Topaz_WM65_HTC_WWE_2.01.405.exe
mirror thanks to xkovi
http://rapidshare.com/files/249662958/RUU_Topaz_WM65_HTC_WWE_2.01.405.exe
EDIT:it is a beta version of the ROM, it won't flash as such. pls use the following RUU.NBH file which contains the OS only part if u want to test it.
http://giesecke.tk:8090/privat/topaz_rom/index.php?dir=Cooked_ROMs/WM+6.5/Aman/&download=RUU.rar
Are u kidding me? Really stock rom with WM6.5? Have u already tried it???
Cant believe its true!!!!!
OMG
i cant belive it
Can someone post mirror please...Rapidshare maybe
what is the source of this rom?
Is this the official 6.5 release..? Could you comment on the source of this..?
Dont download it semi bricks the Topaz - Shadowline said in xda-devs irc
After trying to flash, it sticks at 99% and then dies after a few min. Which causes the phone to only start back into tri color bootloader with errors and no longer boot WM. Luckily flashing another rom is still possible.
Use caution when testing this rom. It may be just an isolated event or something more serious.
On another note, the next roms that I flash now say "Test rom only Not For sale" lol
im flashing now, lets se what hapends
Seemse genuine enough, but I wont know until im done flashing (5 min!)
Thx for your post shadowline, it was a few seconds before I wanted to start flashing
However, if someone wants to test it, here's the mirror:
http://rapidshare.com/files/249662958/RUU_Topaz_WM65_HTC_WWE_2.01.405.exe
yupp, hangs at 99% for me to.. Well.
Thanks for the update.. I was just about to do my first flash of my 1 week old Topaz! I will wait. Just wonder why the the thread starter is quiet and gave little information at the opening post!?
Plz be carefull with this!!!!!
Downloaded twice the file.
Flashed 4 times, with NO success!!!!
1. Flashed with the original exe, the progressbar stuck at 99%, terminate with "Connection Error"
2. Extracted the .exe in separate folder and flashed again, same, progressbar stuck at 99%
3. Replaced the original RUU with that one what comes with all the cooked ROMs, again stuck at 99%
4. Extracted the secon download,flashed without success!!! Stuck at 99%
At least, flashed again with NTGZ28 Standard ROM and all is OK, no damage done to the device.
Any hope that our ROM Cooks solve that problem, if that is really a HTC WM 6.5 ROM???????
Update: this rom stopped at 99% (useing windows RUU), and when soft-reset it only shows color bars but will still be flashable with TOPAIMG.nbh on SD card *pooh*
So im flashing back EnergyRom now. Thank good for (mostly) failsafe flashing!
Do you or anyone that flashed (i use that term lightly lol) have that text about a test rom when you boot your device?
yes i have, red text on bootscreen. What's that about?
i've faced same problem as all of you. but i successfully managed to flash the OS part only. the red 'test only' text seems to be from the splash screen.
damn, I was sooo going to flash that!
!Aman! said:
i've faced same problem as all of you. but i successfully managed to flash the OS part only. the red 'test only' text seems to be from the splash screen.
Click to expand...
Click to collapse
could you please upload the os part that you flashed or tell us how to circumvent the other part?
Thanks
Hey, I have rooted my phone, the Hero, European std.
I used the tutorial on the "TheUnlockr.com", and got to the point where the FlashRec failed, it wasn't supported. The site wrote that if that happened my HTC std rom (2.7...) was fixed, patched for that opportunity of rooting. Although I tried to restart the phone and try again, and then it worked. Strangely I though. But Hey that was cool. It was extremely fast to load the recovery image from the Application, so in my mind it was blinking like, it had gone wrong. I restarted (home+power) into the recovery image, and applied a update.zip
In the new ROM EVERYTHING "unexpectedly stopped working" after another. so i tried the "UNROOT your phone" tutorial on the same site. And it didn't work, the RUU I downloaded displayed an error of that it wasn't the right RUU or something.
After that I started trying to get another updated Recovery image in my phone, Did go quite well, The "recovery-ra-hero-v1.5.2", is no the new image, still if I "flash" a new ROM (2.1) the update way I always ends up with one or to "unexpectedly stopping" of the Settings dialog.. :/
is there any way I can get the HTC 2.7.... ROM in without doing a RUU. Since its not working.
fraction
Why dont you try Modaco rom. Everything work!
Lord Lucan said:
Why dont you try Modaco rom. Everything work!
Click to expand...
Click to collapse
Did! And tried 2 others.
I MADE IT!
I love my macbook pro!!
I did follow a tutorial on a "how to root your hero on a mac" And it saved me. Because I actually ****ed my hero up even more after the last post...
Now I have Rooted it with A2SD
Thanks XDA for the awesome tutorials!
Regards Fraction
Hi, im getting very annoyed with my phone, probably something to do with i don't know what the hell im doing. Basically my phone has lately started to go crazy and constantly reboots, only getting to the orange windows screen. and very rarely boots up. I have the o2 HD2. Ive tried hard reseting..and taking out cards and booting but nothing seems to help. So i spotted the new generic 3.14 rom on the official htc website and downloaded it and thought it would fix it all. But now it wont work, it gets to %100 on the ROM update utility and says '' ERROR 270:UPDATE ERROR - The image file is corrupted, Please check your update utility. Ive downloaded it twice now as it told me as it was corrupt, to download and try again, but its doing the same. Now my hd2 is stuck on the multi colored screen and will NOT boot. Someone please help me, and try to have patience with me as im un-familiar with all this . Someone taking the time to help me would be VERY appreciated. Thanks.
theres a real o2 3.14 rom HERE
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
or you need hspl
Hey Brandon911 after you manage to flash the ROM member samsamuel was kind enough to link for you. If you don't know how to flash the ROM simple put your HD2 in bootloader(tricolor screen) and run the RUU or exe wich ever one it has once you exsrtact/unzip the zipfile. Make sure it says USB in the white bar of bootloader though before you run the updat utility.Anyway once you flash the ROM check your pins that connect to the battery cause I am willing to bet you have been dueing a lot of battery pulls and might have inadvertantly bent one of your pins. I say this cause you said your HD2 was "constantly rebooting".
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Brandon911 said:
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Click to expand...
Click to collapse
I don't see no real reason you should not try a custom ROM. Just make sure and tbis is very important, if the custom ROM has a radio that comes with it, that the radio is compatible with your o2 HD2. I am also sure when samsamuel gets to read this thread again he will be abale to offer more help, probably better than I.
Edit: You will have to have HSPL flashed to your HD2 to flash a custom ROM.
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
hspl4, supports 3.03. If you want to use magldr you will need to go to 2.08.hspl
Brandon911 said:
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
Click to expand...
Click to collapse
Did you use HSPL 3 OR HSPL 4You should use HSPL 4.