Related
My WiFi is not working when I turn it on. When I turn it on, it just do nothing. I tried to run WLAN Module Test to check the problem using Self Diagnostics, sometimes it can detect the MAC address, means OK, but sometimes it shows error saying "GetAdapterInfo() return FALSE....".
For your info, I already reflash the updated ROM (0426), but it seems not working. Now, I'm using ATOM EXEC ROM (0721).
Can someone please help me before I send my ATOM to repair center?
You sure this isn't after an ActiveSync session? My device often needs a soft reset after a session.
Yeahhh... I'm very very very sure about this! Eventhough I didn't use Activesync, the same problem still happened.
I tried to downgrade the ROM, the WiFi still not working!
I have the same problem as idzilhafis.
Tried to run Self Diagnostic and got the same two answers, sometimes the module is correctly detected and somtimes not.
When the module is detected during the test, also the Access Point name is detected (I have a wifi AP at home), but the connection doesn't work.
When I use Wireless Manager, the module is not alwais detected and sometimes also the wifi button disappears.
Of course I flashed and re-flashed the firmware, using the original manufacturer's latest ROM and the "not for sale" version. Nothing changes.
May be an hardware failure?
I think, I can answer myself.
Yesterday in the evening I did put the Atom in the fridge for a while, because i noticed that using the pda and then increasing its temperature, the module was never recognized.
Using the pda after an hour of fridge (I did put it in a little bag), the wifi module works like a charm. It is ok until it's temperature raise again, then the module hangs.
Such a behaviour is typical of an hardware fault.
I think that this kind of problem is surely not due to a wrong use, and should be covered by warranty. But I don't know where to send it for service (I'm in Italy).
Any idea?
I had tremendous problems with my O2 Atom WIFI which would not connect to my laptop WIFI LAN Network. I asked O2 Technical People & Lot of people on this and other forum but got no perfect response.
Practically trying many options I by chance put back the old ROM upgrade of O2 2006123-45 and tried switching on the WIFI and lo and behold it worked fine.
Then I reload the new ROM 20060426 again and it works fine.
This proves that if you reload the NEW Upgrade ROM more than once it locks the WIFI.
No, it proves that any ROM upgrade can result in strange things, and reflashing either the same ROM or another ROM can fix it. It's well known with stuff like battery use (some users have had their standby time doubled by just reflashing the same ROM).
I sent to o2 expert and he don't know what to do. Tried to change registry, still not working. Tried to reflash, stillnot working. I think hardware problem. Don't worry, I still got warranty!
Hi All, I'm a newbie.
Pls shows me where can I download this oldrom O2 Atom 2006123 (-45)?
Or Who can give it to me through email: [email protected] ?
Help me pls, tks a lot
After 1 week that I use TNT 4 ROM , it seem a problem in my JAMIN
my jamin hang some times.
I installed these programs:
Battery Pack pro
Chronous Alarm
SPB Diary
SKTools
Resco Explorer
..
1-my jamin Hang and I don't know what !!
2-some times after restarting the startup screen( Balck page that written Windows Mobile 2006..) appear and don't load Windows then I must reset via pen my mobile.
3- today the biggest problem was happend.
after reastarting my device the blue page (that written IPL/ SPL/GSM/OS) appear and not happend after it ! in blue page my device stop !
I must restart 10-20 times with pen to load windows !
I try to upgrade my radio rom
it was:
IPL:2.13.0001
SPL:2.13.0001
GSM:02.20.21
OS:4.0.0.0
I upgrade it to 2.69 radio rom:
IPL:2.13.0001
SPL:2.13.0001
GSM:2.69.21
os:4.0.0.0
but my device in Blue page stop !!(in blue page written: i-mate ...)
My device work for 1 week ! why this problem appeare?
who can help me?
Thanks alot
Did you try to Hard Reset? (I think no)
Press and Hold Camera + Commanager botton and then press Soft reset botton
After that , It will become black screen with some white text , Then press Call botton.
In after few seconds you Prophet will come to life again.
PS. Hard reset may erase all of your data in phone memory.
maair said:
Did you try to Hard Reset? (I think no)
Press and Hold Camera + Commanager botton and then press Soft reset botton
After that , It will become black screen with some white text , Then press Call botton.
In after few seconds you Prophet will come to life again.
PS. Hard reset may erase all of your data in phone memory.
Click to expand...
Click to collapse
Oh dear friend
Are u sure that after Hard Reset my Prophet come to life??
My Jamin was in health and work well.
but aftre some days these problems appeare !!
Is it because of radio Rom?
Are you sure that after some dayd later and isnatalling some programs these problems does not appeare?
Thanks
ebaskar said:
Oh dear friend
Are u sure that after Hard Reset my Prophet come to life??
My Jamin was in health and work well.
but aftre some days these problems appeare !!
Is it because of radio Rom?
Are you sure that after some dayd later and isnatalling some programs these problems does not appeare?
Thanks
Click to expand...
Click to collapse
First off all, I feel sorry for you that your device stopped working the way it should, I mean that. But I wonder why you start this thread claiming the some ROM has killed your Prophet and then tell us that fooled around quite a bit with all kind of unrelated software and flashing.
Did you tried to find out what really causes your trouble? Did you reflash and installed the 3d party software one by one to isolate the one that to blame?
For what it's worth, I'v red about problems with SPB Diary somewhere in one of the treads. As I don't use it myselve I don't recall any details.
Of course!
Even if Hard Reset is not work , You can still flash your phone to Other rom such as PDAVIET , gollum Touch rom or WM5 official rom.
One thing you must check is just what version of the rom (G3 or G4).
ps. I use radio rom 2.69 for a while with no problem. Now I use 2.61 because it use less battery than 2.69 and have more stable on phone signal.(with my operator , True in Thailand)
rondol1 said:
First off all, I feel sorry for you that your device stopped working the way it should, I mean that. But I wonder why you start this thread claiming the some ROM has killed your Prophet and then tell us that fooled around quite a bit with all kind of unrelated software and flashing.
Did you tried to find out what really causes your trouble? Did you reflash and installed the 3d party software one by one to isolate the one that to blame?
Click to expand...
Click to collapse
Dear friend
I try to find what happen to my device, I always install programs one by one to make sure it does not damage my device.
I don't know why this problems happend !
I read all discussion in this FORUM about Stucking bootloader page..but not solving my problem...all of them hang their devices after upgrading rom, I use my prophet for some days after upgrading to TNT 4 ! after reseting in the blue page my device stopped !! I Must reset my device with pen some time to maybe load windows (
please help me to solve these problems because all program are standard and work in Windows mobile 2005-6
If a program damage my device loading windows is crashed, but i sayd in Ble page that written I-Mate ...SPL/IPL/GSM/OS... my device STOPED !
ebaskar said:
Dear friend
I try to find what happen to my device, I always install programs one by one to make sure it does not damage my device.
I don't know why this problems happend !
I read all discussion in this FORUM about Stucking bootloader page..but not solving my problem...all of them hang their devices after upgrading rom, I use my prophet for some dayd after upgrading to TNT 4 ! after reseting in the blue page my device stopped !! I Must reset my device with pen some time to maybe load windows (
please help me to solve these problems
Click to expand...
Click to collapse
Just a hunge... did you reset while connected to USB (Active Sync)? That is known to be a problem whit all the WM6 ROM's. It seems that all that helps is an proper HR. And as I added to my previous remark, SPB Diary seems to be a troublemaker too, when used with the new WM6 ROM's, but as I don't use it, I'am not familar with the details.
rondol1 said:
Just a hunge... did you reset while connected to USB (Active Sync)? That is known to be a problem whit all the WM6 ROM's. It seems that all that helps is an proper HR. And as I added to my previous remark, SPB Diary seems to be a troublemaker too, when used with the new WM6 ROM's, but as I don't use it, I'am not familar with the details.
Click to expand...
Click to collapse
no, not after Active sync
It is random , it means a little time, after soft reset or after power off device my Jamin load correctly and in more times it hang and stop in Blue page !!
It is very wonderful !!
I am now Hard resetting my device
It is too hard for me to hard resetting my device because all program that i installed are deleted
I don't use backup software because I belleave if a problem is in my device in backup file is come too.
Hello,
If you want to use your phone and not mess around with it , just stop upgrading ,downgrading!! I really mean it. yes of course a hard reset will delete all your files and programs but if you want to care about these stuff , you really have to consider to stop messing with your device. I think if one day your prophet die, you are the person responsible not any ROM.
Just read the wiki / forum, use the search button and you will find what is good for your device, and what's gonna kill your device
about SPB Diary, I've been using this program since i bought my prophet, and i've had no problem with it so far. if you read the forum you will know that after upgrading or downgrading your radio rom you MUST perform a hard reset.
good luck my friend.
I am sorry to hear that.
节哀顺变吧！如果你来广东，我帮你修。可惜你是外国的。
I have the same problem, but my prophet not kiled!!! I'm sure is problem in some programs. I remove the battery and sim card. Wait some time, and back. After that prophet boot normal, but everytime when I power off (and sometimes after softreset) i have to do that. Somtimes help just softreset. I have same problem (not always) with PDAVIET and Gullum rom after installing 3d party software.
Sorry for my english.
I'm realy sad to hear about your problem with the phone but to say that it's the rom is a bit to much although some thing in the rom might give problems it's know that the 6 button homeplug is causing frezz on some devises.... but I have not expirienced any frezz on startup myself... and I have used TNT and all gullum roms .... so maybe the problem is related to IPL/SPL or radio rom not shure or even 3dr party software.. if it's not IPL/SPL or radio rom it must be 3dr party software because I have not installed any of them except for PocketCM by tena
ninjaz said:
I have the same problem, but my prophet not killed!!! I'm sure is problem in some programs. I remove the battery and sim card. Wait some time, and back. After that prophet boot normal, but every time when I power off (and sometimes after soft reset) i have to do that. Sometimes help just soft reset. I have same problem (not always) with PDAVIET and Gullum rom after installing 3d party software.
Sorry for my english.
Click to expand...
Click to collapse
Which programs did you installed?
after 6-7 programs i installed my prophet hang in blue screen page !
I try to load windows after reset my device about 10 times with its pen, and uninstall new program i installed :Resco photo Viewr 6.33 professional edition,SMS group,Sprite mobile...but the problem not solved...and i hard reset my device again
if the problem occur in your device too because of these programs (such as sprite mobile (for prevention of stealing and thief mobile) then we can say the problem is because of this program (sprite mobile-but i know this program is compatible with WM6 ) .
If not it is a bug in TNT ROM that can't install more programs.
or we can say Soft reseting is limited in this ROM for example if soft reset is more that 30 times the windows not loaded !!!
I don't know, but it is a bug in this ROM !! so if this bug is in other W6 ROMs I come back to Aserg AKU 3.13
gullum said:
I'm realy sad to hear about your problem with the phone but to say that it's the rom is a bit to much although some thing in the rom might give problems it's know that the 6 button homeplug is causing frezz on some devises.... but I have not expirienced any frezz on startup myself... and I have used TNT and all gullum roms .... so maybe the problem is related to IPL/SPL or radio rom not shure or even 3dr party software.. if it's not IPL/SPL or radio rom it must be 3dr party software because I have not installed any of them except for PocketCM by tena
Click to expand...
Click to collapse
Dear Gullum
we know that PPC is good for world of different program can be installed in these devices. and we know the programs in the ROM is not sufficient so we installed needed programs.
I know TNT 4 is full of application that non of the other ROMs don't have them.
I try to check some programs I installed in Prophet (TNT-4 -jamin)
the Sprite Mobile program work well, not any other program i installed, only Sprite Mobile...The device work well.
So it is a bug in ROM that can't initializing more program installed then windows not loaded !
if a ROM has this Bug we can't use it !!
we should check all WM6 ROMs and installed more that 10 famous Programs and soft reset every time we install a program.
So which WM6 ROM do u offer to install in our devices to work stable and correctly without this Huge bug that can't install programs !! ?
Thanks for your guidance.
The problem not solved
I installed some programs in my device (Jamin) but this problem appeare after installation, I installed one by one and accure for new problem but after softrest this problem appeare again
GULLUMN plz install some program in ur new ROM if work then put it in public.
only cube & touch version of ROM is not sufficient, we should can install programs on our ROM for more usage !
any body can help?
hi
hi im saeid from iran.
ebaskar
my device is to you
after 24 to 72 hours my my device drive is cleared!!!
all data loosed!!!
after hard reset, again after 24 to 74 hours repeat!
its virus on your memory card.
after any hard reset
you opening SD card and installing some programs...
this virus is run!!!
please format your sd card and close of device
so press camera and commanager button and press soft reset...
after black screen prees green key(call)
your devise is wholesome!!!
excuse me
my english is bad
I think i understand ur problem and yes its the rom to blame after flashing a next rom I did not have this problem well the solution was when u install any programs to your storage card remove the .ink files from Windows/Programs folder of all applications thats installed on the SD card and from startup folder after doing that it works well but as soon as I installed a program or tryed to make a shortcut it gives problems I suggest that you ether flash a next rom and problem salved or get a rom cook to edit the rom and fix it up to remove this bug hope it helps you can try it u got nothing to lose
Hi All,
Tried to read all the posting about WM6 ROM from any version for prophet and i have some conclusion about this :
- All the Prophet in WM5 is having minor problem but when using WM6 some mayor bugs comes up.
- Most the thread discussing about WIfi problem, BT problem, SDCard problem
- Some applications sometimes make the prophet boot screen freeze.
- After few days, the flashing ROM is going unstable such as : alignscreen, no working button, glitch sound from the speaker etc.
- Battery drain from some ROM version is very fast and the indicator indicate the mistaken bar.
- The included application (not OEM application) cannot be upgraded because if you upgrade the application then you want to uninstall, the problem will occured since the registry still in the ROM and sometimes make the prophet freeze and need to hard reset.
Also beside some bugs in the WM6 ROM,there are some advantages such as : better view screen and better application performance.
Hope this will help you who want to upgrade to WM6 from WM5.
Thanks
I've had issues with device freezing up at boot up, once it required a hard reset. Also I've been unable to download a medical program mobile micromedex as I get a missing memory card error. Otherwise so far so good including battery life.
tb146 said:
Hi All,
Tried to read all the posting about WM6 ROM from any version for prophet and i have some conclusion about this :
- All the Prophet in WM5 is having minor problem but when using WM6 some mayor bugs comes up.
- Most the thread discussing about WIfi problem, BT problem, SDCard problem
- Some applications sometimes make the prophet boot screen freeze.
- After few days, the flashing ROM is going unstable such as : alignscreen, no working button, glitch sound from the speaker etc.
- Battery drain from some ROM version is very fast and the indicator indicate the mistaken bar.
- The included application (not OEM application) cannot be upgraded because if you upgrade the application then you want to uninstall, the problem will occured since the registry still in the ROM and sometimes make the prophet freeze and need to hard reset.
Also beside some bugs in the WM6 ROM,there are some advantages such as : better view screen and better application performance.
Hope this will help you who want to upgrade to WM6 from WM5.
Thanks
Click to expand...
Click to collapse
I agree, but keep in mind that the "base"WM5 was officially written for the Prophet, the WM6 is taken from other devices. This makes it much harder for the cooks to get a full picture of the different drivers, as those files take care for the hardware.
So, most problems don't origin in WM6, but in the differences between the devices.
But again, I agree that WM6 on a Prophet isn't 100% stable yet.
dolphinxda said:
let's try Helloworld1 6.5 clean rom
Attention ATOM user:
68xx user please ignore this message.
I am very busy recently but I still squeeze out some time to build one newest 6.5 ROM for you. If you want test, just download below. Don't expect too much for this ROM, it may not even boot! I can't test it.
You can report the problem, but I may not fix the problem immediately.
Link:
http://www.mediafire.com/?j5dz0id2ege
__________________
You can donate me in the following link. Thanks.
https://www.paypal.com/xclick/busine...rency_code=USD
Click to expand...
Click to collapse
I just test the ROM for my Atom and working fine, thanks to dolphinxda to provide the download link, and all the credit to Helloworld and make our Atom shining again
(21 Nov 09)Please read through the threads to find out the latest ROM, currently is the B2 ROM.
(22 Nov 09) B2 ROM is here
dolphinxda said:
Come........ on....... guy let's test 6.5 B2 by Helloworld1 Here
Thanks Brother Helloworld1 for working on atom device
Click to expand...
Click to collapse
Test the Helloworld1 6.5 clean rom for Atom, thanks to dolphinxda for providing it
how bout the bluetooth??? (old same question to wm 6.5 on atom)
knoxbrotherhood said:
how bout the bluetooth??? (old same question to wm 6.5 on atom)
Click to expand...
Click to collapse
Just tested the bluetooth handfree and unfortunately it's not working also, unable to test the BT headset because not available on the hand.
thanks God... it make my Atom shining again...
any problem in camera?
knoxbrotherhood said:
how bout the bluetooth??? (old same question to wm 6.5 on atom)
Click to expand...
Click to collapse
Bluetooth should not work proper. I haven't replaced the bt drivers from 6828 ones to atom's. I will replace the files in next release. But I don't know whether it will work fine.
helloworld1 said:
Bluetooth should not work proper. I haven't replaced the bt drivers from 6828 ones to atom's. I will replace the files in next release. But I don't know whether it will work fine.
Click to expand...
Click to collapse
If you would, can you remove hp application from this roms and replaced it with the atom. Still it's more better than any other wm 6.5 that have been released, I think, keep trying helloworld1, I've been using your clean rom (C1) for over 3 month and no complain at all, anyway thanks helloworld1.
Welcome sonofwind2008 u faster than me in providing report
Thankful to Master Helloworld1 that have been work hard for ATOM users
Hope Helloworld1 will replace the hp bluetooth driver on the next release soon
Another report
thanks Helloworld1 for the hark work on atom device
The speed of ROM is Quite fast, similar to 6.1, keep it up man!
My issue is,
1. Screen showed stripe, it's like wrong driver (like we flash atom exec rom on atom).
2. Boot up quite long n stuck for the first boot.
3. When i press reset button, it show HP boot first then welcome screen.
4. When i attempt to change the backlight, my device suddelty restart.
5. Can't change right tone profile although i change to Vibrate then Ring, it still set to ring.
6. Camera can take picture but can't change some settings.
See the attached
Pic-1 show the whole device
Pic-2 show the left hand of device which is not full screen
Pic-3 show the right corner at the top that we can see X button, but it solve after reboot.
Sorry for the pictures, if i capture from tool that install on the phone it will show normally.
Hi helloworld1, thanks for working on Atom ROM. I'm not tried yet your ROM. How about the battery consumption?
Now l using WM 6.5 by Khoa. Everyday i charge my device ((
eku_0511 said:
Hi helloworld1, thanks for working on Atom ROM. I'm not tried yet your ROM. How about the battery consumption?
Now l using WM 6.5 by Khoa. Everyday i charge my device ((
Click to expand...
Click to collapse
to me, i can say that this rom consume battery like 6.1 by hellowrold1 too.
Thank you, Helloworld1 and dolphinxda,for this.
Just tried it today.My findings:
1.As reported, cannot set to vibrate mode.
2.Device freezes when camera button is pressed. Camera works fine when started thro'
Programs.
3.Battery current( idle condition) is low, about 100 to 120 mA(BQ27200Expert)
Keep up the good work,sir!
happ with Atom ROM from Helloworld1
thanks for not forgeting our atom. it's quite happy to test your new ROM.
dolphinxda said:
thanks Helloworld1 for the hark work on atom device
The speed of ROM is Quite fast, similar to 6.1, keep it up man!
My issue is,
1. Screen showed stripe, it's like wrong driver (like we flash atom exec rom on atom).
2. Boot up quite long n stuck for the first boot.
3. When i press reset button, it show HP boot first then welcome screen.
4. When i attempt to change the backlight, my device suddelty restart.
5. Can't change right tone profile although i change to Vibrate then Ring, it still set to ring.
6. Camera can take picture but can't change some settings.
See the attached
Pic-1 show the whole device
Pic-2 show the left hand of device which is not full screen
Pic-3 show the right corner at the top that we can see X button, but it solve after reboot.
Sorry for the pictures, if i capture from tool that install on the phone it will show normally.
Click to expand...
Click to collapse
1. This may disappear after a soft reset. This is normal and will never appear after a soft reset.
2. No solution. HP's is the same.
3. I don't change it.
4. Maybe the driver problem, I will try to find another driver.
5. This is a script problem. I can fix it.
6. What settings.
mns123 said:
Thank you, Helloworld1 and dolphinxda,for this.
Just tried it today.My findings:
1.As reported, cannot set to vibrate mode.
2.Device freezes when camera button is pressed. Camera works fine when started thro'
Programs.
3.Battery current( idle condition) is low, about 100 to 120 mA(BQ27200Expert)
Keep up the good work,sir!
Click to expand...
Click to collapse
The buttons are a little different on Atom so the camera is not working. I will try to fix this.
I will change vabrate script in next release.
helloworld1 said:
1. This may disappear after a soft reset. This is normal and will never appear after a soft reset.
2. No solution. HP's is the same.
3. I don't change it.
4. Maybe the driver problem, I will try to find another driver.
5. This is a script problem. I can fix it.
6. What settings.
Click to expand...
Click to collapse
3. It would be great if u replace to any O2 Logo or disable this show and keep only O2 Welcome Screen.
6. Setting? (i would like to change the picture size to 1600*1200 UXGA for Photo or or video 320*240 QVGA) when i click on Capture setting tab it stuck.
dolphinxda said:
3. It would be great if u replace to any O2 Logo or disable this show and keep only O2 Welcome Screen.
6. Setting? (i would like to change the picture size to 1600*1200 UXGA for Photo or or video 320*240 QVGA) when i click on Capture setting tab it stuck.
Click to expand...
Click to collapse
I will have try to fix the camera problem.
I say I haven't changed to atom screen. Maybe there is some misunderstanding.
helloworld1 said:
I will have try to fix the camera problem.
I say I haven't changed to atom screen. Maybe there is some misunderstanding.
Click to expand...
Click to collapse
Oh... sorry i misunderstood, waiting for the next release
dolphinxda said:
thanks Helloworld1 for the hark work on atom device
The speed of ROM is Quite fast, similar to 6.1, keep it up man!
My issue is,
1. Screen showed stripe, it's like wrong driver (like we flash atom exec rom on atom).
2. Boot up quite long n stuck for the first boot.
3. When i press reset button, it show HP boot first then welcome screen.
4. When i attempt to change the backlight, my device suddelty restart.
5. Can't change right tone profile although i change to Vibrate then Ring, it still set to ring.
6. Camera can take picture but can't change some settings.
Click to expand...
Click to collapse
7. When Record and Camera button is pressed, the device is stuck
8. O2 MediaPlus Button deactivated
9. Many HP application
are this rom is extracted from PDAVIET rom? because themes on this rom is same as on PDAVIET rom
mns123 said:
Thank you, Helloworld1 and dolphinxda,for this.
Just tried it today.My findings:
1.As reported, cannot set to vibrate mode.
2.Device freezes when camera button is pressed. Camera works fine when started thro'
Programs.
3.Battery current( idle condition) is low, about 100 to 120 mA(BQ27200Expert)
Keep up the good work,sir!
Click to expand...
Click to collapse
can i get this wm 6.5 clean kitchen?
Hi glossyx1 Here's 6.5 Kitchen by Helloworld1
and Here for atom OEMDriver
This tool is made my master Helloworld1, any question may goes to him. Hope we, atom users, will have more chef work on atom device
Bought a T mobile HD2 (unlocked) second hand with energy rom installed.
Got it home & I find that the wifi & bluetooth are not working.
It picks up the network signal fine & the data connection is working fine.
But the wifi turns on & will not pick up anything.
The bluetooth it seems does not discover & is not discoverable.
I suspected it may be somthing to do with the rom so I loaded up a stock T mobile rom with the same results.
I have updated the radio with the same results.
The phone has Hspl loaded & I am wondering if I could do a complete cleanout of everything including Hspl & reload a completly vanilla stock Rom would that help.
I have fiddled with all the settings for both wifi & bluetooth & still no results.
At this point I need help!!!!
Run a task 29 then the stock rom of your choice, check the radio installed is compatable with the rom, hard reboot after completing the rom flash (its a good idea to do that first as well in case you don't need to run a 29 or flash)
johnerz said:
Run a task 29 then the stock rom of your choice, check the radio installed is compatable with the rom, hard reboot after completing the rom flash (its a good idea to do that first as well in case you don't need to run a 29 or flash)
Click to expand...
Click to collapse
I've the same problem ...I suppose.
I used a Touch Pro in the last two years and Energy ROMs since September 2009. I never had problems with Wi-Fi an Bluetooth.
Recently I bought a HD2 and tried Bloutooth and Wi-Fi only after 1 week.
So, both the Touch Pro and the HD2 got the same ROM (Energy ROM) flashed , each by its own version, but two days ago I discovered WiFi not working (DISCOVERED, because I never tried it before)
The problem seems an extremely poor signal seen on the on screen meter, only if I'm close to the router (1-2 meters!) I couldn't establish a real connection, because the HD2 loss the signal every 30-40 seconds.
Bothered about this I tried with Touch Pro: the result is the same!
So I concluded: "It's the ROM!". Strange (never had problems with Energy ROMs) but possible. I flashed the stock ROM on the HD2: the issue remains. So I thought about the RADIO, and I flashed the RADIO 2.12.50.02 (compatible with ROM). The issue is still here.
I used Task 29 before another flash, then I tried an Artemis ROM with RADIO 2.12.50.02... nothing changed. (note that I tried almost every different settings about Wi-Fi,from BsB tostandard enhance settings)
Last (related?) issue: when I try a hard reset, the progress bar starts to "move" but after 3-4 seconds (about a third of the bar) the bar disappears and I got the "Press VolUp button" message. Then the phone has the first boot... but I wonder if the HR is complete, because it seems yes.
Finally I came to this thread and... another doubt: what about BT?
I tried both the Touch Pro and the HD2 Bluetooths but they can't connect or recognize each other (every "Find" and "Visible" options activated)
I didn't try yet with Touch Pro (flash etc.) but I am very bothered and dubious about it.
Cooked ROM Energy Leo 1 Aug
OS version 5.2.23673
Radio 2.12.50.02
Operatore: H3G ITA
For every other info needed to give help... ask!
THANKS FOR HELP or TIPS
WIFI & Bluetooth
Thus far I have run task 29
Reinstalled a stock T-mobile rom
But no luck wifi & bluetooth still not working properly.
Decided to go right back to the very beginning & uninstalled HSPL by loading the stock Rom from the SD card
Stock rom would not upload & i am getting the SPL 1.42.0000 Screen plus "Upgrade Rom code error please try again"
The question I have now is which is the proper stock Rom for this T mobile HD2 & how do I find that out?
flinx said:
Thus far I have run task 29
Reinstalled a stock T-mobile rom
But no luck wifi & bluetooth still not working properly.
Decided to go right back to the very beginning & uninstalled HSPL by loading the stock Rom from the SD card
Stock rom would not upload & i am getting the SPL 1.42.0000 Screen plus "Upgrade Rom code error please try again"
The question I have now is which is the proper stock Rom for this T mobile HD2 & how do I find that out?
Click to expand...
Click to collapse
Sorry I can't help about this.
We are alone in this thread!
wifi & bluetooth
I think your right.
Ah well, at least I have a very expensive doorstop!
You are not alone. I am experiencing the exact same problem and have yet to find an answer.
Task 29 didn't help and reflashing the radio the traditional way (even with the stock rom) doesn't seem to overwrite whatever is causing this problem.
Would uninstalling the hspl do anything? I am running out of ideas.