Please, I need this urgently. My XDA2 is stuckin bootloader mode and all attempts to flash it with any updates gives me Error 100 - Device ID . I need to try flash it by SD card with existing functional ROM and see wha happenes. Please!
this old topic, describes how to grab ROM file from working XDA2
http://forum.xda-developers.com/vie...tdays=0&postorder=asc&highlight=ntrw&start=25
Put it on my FTP please, ID64.serveftp.com akira/akira
TIA
I follow al steps indicated to reconstruct the OS part (Part02.raw) pf a the spanish dumped rom that is in FTP using imgfs tools and rombaker utility and the reconstructed nbh file doesn´t flash with the modified flash utility. I get errors [260] "update error" and [244] Invalid Model ID. Before try to flash I have supercid my device (HERM 300) and applied hardSPL. What can be wrong in the process?
dcoelho said:
I follow al steps indicated to reconstruct the OS part (Part02.raw) pf a the spanish dumped rom that is in FTP using imgfs tools and rombaker utility and the reconstructed nbh file doesn´t flash with the modified flash utility. I get errors [260] "update error" and [244] Invalid Model ID. Before try to flash I have supercid my device (HERM 300) and applied hardSPL. What can be wrong in the process?
Click to expand...
Click to collapse
if you're getting invalid model ID then you've definitely overwritten Hard-SPL
With wich SPL must I work to get connection for flashing?
In this HERM I have SPL 1.30 Olipro (btw thanks for your great work)
Hey guys
My gene is not booting after the upgrade process
i.e after clicking the finish button the gene should reboot
but it didnt reboot
tried rebooting the phone manually
but that didnt help
PLease let me know what could be the cause
open up your battery and insert it again.go to boot loader mode and re start rom update utility and flash the rom u wish to.i supposed u have patched your spl well.the spl version should be 1.07.Oref.
http://forum.xda-developers.com/showthread.php?t=472169
the rom u wish u flash should be named ruu_signed.nbhif u are using spl locking tools in this post the ruu should be in the rom update utility folder outside the spl Updater (olipro & orekfro) folders.
do read the thread carefully again before u flash.
Using BesFen's Manila 2D WM 6.5 21815 ROM(NEW KITCHEN) for new gene.
With an Kingston 16GB SDHC Storage card.
My previous rom(using alternately too)
Thanks to Sumit for his Sumit's VanillaManila Ultimate ROM v3.1.1 (build 21046)
Links to my best enjoyed cabs on gene :
Rapidshare link :
http://rapidshare.com/files/24773697..._Cabs.rar.html
Megaupload link:
http://www.megaupload.com/?d=R6D4JEJW
Hi, got problem and need your HELP!
EDITED:
I was trying to set my raph to stock, cuz warranty.
But, after flashing stock SPL, it goes to bootloader write :
" Upgrade rom code error, please try again"
What was happend:
1)I forgot to flash back stock Radio, so... my Raphael now stay in bootloader. And write "Upgrade ROM code error, please try again".
2)I was tried to flash stoc SPL via SD card. maybe it is problem.
What was I try:
I tried to flash HardSPL, but it stuck on 0%
I tried to flash stock Radio, but it stuck on 0%
I tried to flash stock ROM , but it stuck on 0%
I tried to flash non-stoc ROM, and it writes "Invalid vendor ID" or somethink like that, its cuz I have stock SPL, right?
What next?
SOLVED
!! If you will try this way it is on your own risk !!
Here is how to solve this issue:
1) Download MTTY 1.42
2) Download ActiveSync Drivers
3) Download STOCK ROM for your phone(best is from you provider or seller web site)
4) Install drives and disable USB connection in ActiveSync and reboot your computer
5) Set your phone to bootloader and connect via USB
6) Open MTTY set connection to USB
7) Send command "set 16 0" in mtty (without the quotes)
8) Reboot your phone and set it again to bootloader
9) Allow USB connection in ActiveSync and run RUU with stock Rom and Radio
10) If flash is done, make hard-reset
11) You are done!
!!This comes with no gaurentee!!
I cant find way out of this issue
Maybe mtty can help, but I dont know what was write as commands.
A few members have run into that issue before.
Before MTTY, I recommend posting in the HardSPL thread to see if such a member can share some insights.
Cheers,
thx, hope they help me.
EDITED ! new facts !
MiTMaNeK said:
Hi, got problem and need your HELP!
EDITED:
I was trying to set my raph to stock, cuz warranty.
But, after flashing stock SPL, it goes to bootloader write :
" Upgrade rom code error, please try again"
What was happend:
1)I forgot to flash back stock Radio, so... my Raphael now stay in bootloader. And write "Upgrade ROM code error, please try again".
2)I was tried to flash stoc SPL via SD card. maybe it is problem.
What was I try:
I tried to flash HardSPL, but it stuck on 0%
I tried to flash stock Radio, but it stuck on 0%
Click to expand...
Click to collapse
As far as I know, HardSPL and the stock SPL cannot be flashed via SD card. You must use the .exe file that you download with HardSPL. I believe that the first post of the HardSPL thread says something to that effect. Flashing the stock SPL should always be done LAST, so flash your stock ROM and Radio (if the ROM does not include the Radio). If your phone is stuck in bootloader, you should still be able to flash your device. See this thread for more information about flashing back to stock SPL.
htcfan78 said:
As far as I know, HardSPL and the stock SPL cannot be flashed via SD card. You must use the .exe file that you download with HardSPL. I believe that the first post of the HardSPL thread says something to that effect. Flashing the stock SPL should always be done LAST, so flash your stock ROM and Radio (if the ROM does not include the Radio). If your phone is stuck in bootloader, you should still be able to flash your device. See this thread for more information about flashing back to stock SPL.
Click to expand...
Click to collapse
Yea, I know it now too HardSPL and stock SPL only via cable.
Yea, Im able to flash, but it every time stuck on 0%
And if i try to flash ROM what isnt for my Rahp it write "invalid vendor id", its because I got stock SPL and I cant find way how to flash HardSPL - normal way isnt working for me.
I dont know if what i have in mind will fix it - or possibly make it worse! so i wont post it here (in case someone else mistakes it for propper advice!) but check your PM - and remember it comes with no gaurentee!
SOLVED !
BIG THX TO Beeble !
Thx for the tip that info was very important for me...
Hey, i've cooked a ROM and build a NBH. But i'm a noob.
Now i have set the os.nbh to 0x100 (at wp6.5 phones the ipl) instead of 0x400.
After flash this RUU my Mozart are only in Tri-Color-Screen.
Now i've flashen my HSPL (HSPL is 0x200, but i hope it fix my Problem), but nothing.
Then i looked at a Stock RUU, but it has nothing at 0x100.
The install of my ROM ends at 100% with error 270 (image file corrupt).
Any idea?!
Now i've flashed a stock ruu and my phone works.
The Problem is my rom.
I've extracted the base rom with OsBuilder and added my language files to the sys folder. Then i've scanned and rebuilded with the same tool and became a new os.nb file.
Now i have built a nbh file with nbhgen and installed this with "MozartAdvancedRUU-1.0.3".
Any idea where are the problem?