Related
My apologies if this has been covered....I searched a bit but didn't find the answer.
My friend has a Mogul he got from sprint. He'd like to sell it to me for $75.
I wonder. If I use DCD kitchen, load the verizon radio, DCD ROM, then the verizon Carrier cab......would it work?
Thanks,
Matt
sudermatt said:
My apologies if this has been covered....I searched a bit but didn't find the answer.
My friend has a Mogul he got from sprint. He'd like to sell it to me for $75.
I wonder. If I use DCD kitchen, load the verizon radio, DCD ROM, then the verizon Carrier cab......would it work?
Thanks,
Matt
Click to expand...
Click to collapse
I don't believe so. The radio in the sprint phone is GSM and the radio in the Verizon phone is CDMA.
Edit: I am incorrect. Sprint is CDMA and Verizon is CDMA... so I'm guessing that it could be possible. I have yet to test this though.
The answer is yes and no.
Yes, it is the exact same hardware, and therefore you can flash a custom rom/radio and install the verizon carrier cab leaving you with an xv6800 with a mogul casing.
The only issue is getting Verizon to activate it on their network, as it has a Sprint ESN. In the past, they were very strict about not allowing any non-Verizon ESN's in their database, though I've heard RUMORS that they've eased up a bit on it due to their "Open Network" campaign.
Honestly, it's a crapshoot, but if you can get Verizon Support to activate it, then it would work perfectly.
gc14 said:
The answer is yes and no.
Yes, it is the exact same hardware, and therefore you can flash a custom rom/radio and install the verizon carrier cab leaving you with an xv6800 with a mogul casing.
The only issue is getting Verizon to activate it on their network, as it has a Sprint ESN. In the past, they were very strict about not allowing any non-Verizon ESN's in their database, though I've heard RUMORS that they've eased up a bit on it due to their "Open Network" campaign.
Honestly, it's a crapshoot, but if you can get Verizon Support to activate it, then it would work perfectly.
Click to expand...
Click to collapse
I heard somewhere that verizon has a new policy to support any phone on their network, but they also call their data plan with a 5GB cap the "UNLIMITED" plan. Go figure.
Hopefully when Sprint comes out with the Diamond and other awesome new HTC phones about a year ahead of Verizon, we will be able to active their hardware on The Network. I am keeping my fingers crossed.
Yes it can be done. i have an alltel ppc6800 on vzw. the easiest way to do it is from the vzw website esn switch or activate equipment. There are some other steps you have to take to get the software loaded, not the stock rom. Then you will have to call vzw and have them reset your DMU keys. start here:
http://forum.ppcgeeks.com/showthread.php?t=20090
or send you phone in:
http://forum.ppcgeeks.com/showthread.php?t=24855
Oh and you'll have yo change the SPC code since it's a sprint phone. need to get that to a 000000, again the first post will help with that.
Hope this helps.
I have a PPC6800 flashed with one of Ryan's Alltel 6.5 ROMS (Great job Ryan!). The phone worked great in my home area after the flash, but I'm currently on vacation and cannot get a EVDO signal in Orlando! I get decent signal for voice in most places, but really just enought to make calls, lots of "can you hear me now" in the conversations. Verizons maps show that they cover this area completely so I went by the Verizon store to see if they could update the phone. The tech guy said that the phone was still really an Alltel phone and there was nothing that he could do. (he was kinda a jerk, didn't appear to even want to help) I use the data connection alot and have become very dependent on it to stay in touch with my office, but with my current 1x connection, email is about all it's good for.
My questions are:
Can I apply the Verizon version of the ROM to the phone without bricking it?
If not, is there something I can do myself to "update" to tap into Verizon's EVDO network?
Thanks for any help.
you can start by updating your prl *228 option 1 or 2 (dont remember)
GeLopez said:
you can start by updating your prl *228 option 1 or 2 (dont remember)
Click to expand...
Click to collapse
Yeah, I tried that, but since I'm already out of my home area, it doesn't work. All I get is "programming unsuccessful" or something like that.
Alltel's pda support is pretty good. Call in & get one of them on the line. They will try & make you do the *228 thing. Also check your setting for Home Only/Roam and see if that makes a difference at all.
dlundy said:
I have a PPC6800 flashed with one of Ryan's Alltel 6.5 ROMS (Great job Ryan!). The phone worked great in my home area after the flash, but I'm currently on vacation and cannot get a EVDO signal in Orlando! I get decent signal for voice in most places, but really just enought to make calls, lots of "can you hear me now" in the conversations. Verizons maps show that they cover this area completely so I went by the Verizon store to see if they could update the phone. The tech guy said that the phone was still really an Alltel phone and there was nothing that he could do. (he was kinda a jerk, didn't appear to even want to help) I use the data connection alot and have become very dependent on it to stay in touch with my office, but with my current 1x connection, email is about all it's good for.
My questions are:
Can I apply the Verizon version of the ROM to the phone without bricking it?
If not, is there something I can do myself to "update" to tap into Verizon's EVDO network?
Thanks for any help.
Click to expand...
Click to collapse
Lol WOW.. If your Carrier is Verizon why the heck would you flash my Alltel ROM?? WTF do you think its an Alltel ROM for?? Its not a stock ROM it is a Custom ROM meant to flash on any TITAN(mogul, ppc6800).. It is fully programmed (besides PST/QPST a user has to program that memory region of the phone themselves) for the Carrier..
What you should have done was take your "Alltel Branded" PPC6800 and flashed the olipro2.40 unlocked bootloader, then flash a Custom Verizon ROM, then flash a gps radio 3.35 and up, then hard reset and pull battery for a couple minutes. Make sure the phone is UNPLUGGED and boot it up. Now access PST and Program it for VERIZON, load your local Verizon PRL, and update the items so phone resets. When it boots back up you want to access DMR (diagnostic mode) and plug it into the computer and Program QPST for VERIZON, make sure everything is set for Verizon you have to do some searching.. Also make sure to do the GPS one tab last and write to phone while still in that TAB, do not leave the GPS one tab until after its completed. Now unplug the phone and open task manager and close DMR, now soft reset the phone. Keep it UNPLUGGED and when it boots up access the internet to set it up for the first time.
RyanMogul6800 said:
Lol WOW.. If your Carrier is Verizon why the heck would you flash my Alltel ROM?? WTF do you think its an Alltel ROM for?? Its not a stock ROM it is a Custom ROM meant to flash on any TITAN(mogul, ppc6800).. It is fully programmed (besides PST/QPST a user has to program that memory region of the phone themselves) for the Carrier..
What you should have done was take your "Alltel Branded" PPC6800 and flashed the olipro2.40 unlocked bootloader, then flash a Custom Verizon ROM, then flash a gps radio 3.35 and up, then hard reset and pull battery for a couple minutes. Make sure the phone is UNPLUGGED and boot it up. Now access PST and Program it for VERIZON, load your local Verizon PRL, and update the items so phone resets. When it boots back up you want to access DMR (diagnostic mode) and plug it into the computer and Program QPST for VERIZON, make sure everything is set for Verizon you have to do some searching.. Also make sure to do the GPS one tab last and write to phone while still in that TAB, do not leave the GPS one tab until after its completed. Now unplug the phone and open task manager and close DMR, now soft reset the phone. Keep it UNPLUGGED and when it boots up access the internet to set it up for the first time.
Click to expand...
Click to collapse
Ryan, I normally agree with you 100%, but I don't think that's the case here. I'm pretty sure he's an Alltel customer that is confused because of Verizon's recent purchase of Alltel.
Basically, Verizon is not going to be fully taking Alltel phones onto their network...ever. They are still Alltel phones. BUT there are new PRLs out there which will allow you to completely utilize the entire Verizon (and Sprint, too) tower structure.
So what he should do is still with the Alltel ROM. And because Alltel gives the 6800 their 3xxxx series PRLs and not the higher quality 4xxxx series, he needs to donwload the best PRL and update it manually.
Here's a link to a page where you can download the latest PRL 40050. There are instructions on the page to show you how o install. The one change I've had to do is instead of simply ##775, I had to do ##775#.
http://www.the-answerman.com/sidlist/prl/index.asp
Good luck!
btonetbone said:
Ryan, I normally agree with you 100%, but I don't think that's the case here. I'm pretty sure he's an Alltel customer that is confused because of Verizon's recent purchase of Alltel.
Basically, Verizon is not going to be fully taking Alltel phones onto their network...ever. They are still Alltel phones. BUT there are new PRLs out there which will allow you to completely utilize the entire Verizon (and Sprint, too) tower structure.
So what he should do is still with the Alltel ROM. And because Alltel gives the 6800 their 3xxxx series PRLs and not the higher quality 4xxxx series, he needs to donwload the best PRL and update it manually.
Here's a link to a page where you can download the latest PRL 40050. There are instructions on the page to show you how o install. The one change I've had to do is instead of simply ##775, I had to do ##775#.
http://www.the-answerman.com/sidlist/prl/index.asp
Good luck!
Click to expand...
Click to collapse
Thanks for trying to clear things up but its still a little inconclusive. You said he is an Alltel Customer, you also said that Verizon bought Alltel.. Now remember he says he has a "Alltel Branded" TITAN.
If Verizon bought Alltel that means the Carrier Alltel still exists, it wasnt a merger correct?
Ok then, if he has a Alltel TITAN, and he is an Alltel Customer, with my Alltel ROM. Why even mention that VERIZON will not take Alltel phones onto their network??? You said he is an Alltel customer, and he has a Genuine Alltel TITAN, so he would be activating the Genuine Alltel TITAN on Alltel..
I was confused because of all this talk about Verizon maps, verizon store, etc.... I see what you mean about his PRL, so hopefully he updates to the 4xxxx series and his issues vanish. But wow what confusing posts..
Hopefully the Verizon, Alltel purchase doesnt affect my Alltel or Verizon ROMs from working properly. I wouldnt be suprised though..
I think the downloaded PRL should do the trick. I used to work for Alltels data support and they cannot help unless you are on network. If you are roaming on another carriers tower then nothing can be done to manually push a new prl through to the phone. I know from experience that Orlando/Kissimmee area is a tricky area. The issue is that Alltels PRLs are very crappy. There are towers in the area which will not incur you roaming charges, but for whatever reason, the phones will not choose to connect to. I forget the SID of the towers in the area which will get you 3-4 bars of EVDO coverage. What I have done before while I am there is to keep checking your phone to see if it picks up on those towers (it will from time to time). Go and check the current SID number and then set that as your home SID and put the phone in home only mode, which will lock you into those group of towers while you are in that area. Of course, if you leave the area you will want to set your phone back to your normal home SID and take the phone out of home only mode. Hopefully the PRL update via that download link above will help you, but if it doesn't then try this method. I will warn you that if you get the wrong tech on the phone and they try and help you update your phone, then they could make matters worst for you.
so, like i said on post #2 update your prl!!! by any means.
RyanMogul6800 said:
...I was confused because of all this talk about Verizon maps, verizon store, etc.... I see what you mean about his PRL, so hopefully he updates to the 4xxxx series and his issues vanish. But wow what confusing posts..
Hopefully the Verizon, Alltel purchase doesnt affect my Alltel or Verizon ROMs from working properly. I wouldnt be suprised though..
Click to expand...
Click to collapse
LOL, if my post was confusing it's because I'm pretty confused. I went to the Verizon store for several reasons.
I am out of my home area and the nearest Alltel Store is 75 miles away (Tampa,FL).
My Home Store is now a Verizon Store.
I recieved a letter telling me that I was now on the Verizon Network.
When I dial a wrong number I get a Verizon recording.
I heard that Verizon bought Alltel
When I got to the Verizon store, they told me
I was still an Alltel customer
Verizon doesn't carry a phone llike mine (PPC6800)
My phone was a pocket pc phone not a smart phone (yes that's what he said)
There was nothing he could do.
Call Alltel tech Support (he was kind enough to give me their number).
The Alltel guy, though courteous and seemingly genuine in his efforts to help, could not. He even mentioned that he had been in Orlando recently and had the same problem. His only recommendation was to take the battery out overnight so everything would clear and maybe when it reconnected it would update the PRLs.
My apologies for not being more clear.
On a positive note, I took btonetbone's advice and updated the PRL,(this is what I'd hoped the Verizon tech could do) and I am currently getting EVDO connection, at least the status indicator says so. I'm not getting a very good signal where I'm at so the speed is not great. 267 DOWN, 314 UP (oddly enough) on a Speakeasy speed test. I'll see how it works tomorrow when I can get a better signal and know more then.
Thanks to all who have responded, I understand things a little better now.
RyanMogul6800 said:
Lol WOW.. If your Carrier is Verizon why the heck would you flash my Alltel ROM?? WTF do you think its an Alltel ROM for?? Its not a stock ROM it is a Custom ROM meant to flash on any TITAN(mogul, ppc6800).. It is fully programmed (besides PST/QPST a user has to program that memory region of the phone themselves) for the Carrier..
What you should have done was take your "Alltel Branded" PPC6800 and flashed the olipro2.40 unlocked bootloader, then flash a Custom Verizon ROM...
Click to expand...
Click to collapse
Had the Alltel ROM not worked so well in my home area that's exactly what I would have done. Well.... It's exactly what I would have done after coming here and finding out how to do it.
Thanks for your hard work...
No problem I am glad you got it sorted out, those speeds are better than nothing at all so you are getting somewhere. Also I breezed by your compliments on my work but thanks for the compliments.
Members in general are great here, very knowledgeable and persistent. This is literally the best forum around.. Too bad they dont go the "thanks button" route though that would be magnificent.
I am trying to help a friend with his aging Android phone, but I am on Verzion and he is on T-Mobile. To update/reestablish troubled communications on Verizon, we dial *228. Is there a similar function / number / etc for T-Mobile? Thanks!
jdmba said:
I am trying to help a friend with his aging Android phone, but I am on Verzion and he is on T-Mobile. To update/reestablish troubled communications on Verizon, we dial *228. Is there a similar function / number / etc for T-Mobile? Thanks!
Click to expand...
Click to collapse
As I understand it, this is merely to push an updated list of towers to a Verizon phone, so as to avoid dead zones and possible roaming. It's part of it being a CDMA network, which T-Mobile is not. Your friend is probably going to have to either call T-Mobile, or post a detailed account of what sort of connection issues they are having in a place like XDA.
T-Mobile has a system where they can "cancel" your location. What that means is it will remove the phone from the hlr (home location registry) temporarily. Then they'll have you power off the phone and possibly remove the sim (not necessary, really) and when you power back on it reestablishes the connection without any saved cache, if you will, in the hlr that could mess it up.
I would give them a call to do this if a simple power-cycle isn't helping. It used to be that only tech support had access to this system, but all of customer care now does for quicker troubleshooting.
Used to work for Tmo.
jdmba said:
I am trying to help a friend with his aging Android phone, but I am on Verzion and he is on T-Mobile. To update/reestablish troubled communications on Verizon, we dial *228. Is there a similar function / number / etc for T-Mobile? Thanks!
Click to expand...
Click to collapse
Generally speaking, we GSM users don't have this problem in the first place.
I have searched and searched and cannot find an answer. I recently acquired a Verizon Droid X2 and had it switched to my Alltel plan. Phone works great, but I cannot fix the dreaded no 3g no mms issues.
I have tried everything I could think of, but nothing. Wifi works fine, dialing out and receiving calls work fine, and sms text works fine.
I looked at the apn setting, which are not easy to find without the help of a 3rd party program on the market (apn shortcut), but now what I see is 5 entries for Verizon related services:
Verizon CBS
Verizon DUN
Verizon FOTA
Verizon IMS
Verizon Internet
But they all have a lock icon next to them, so I can't change any settings. I have tried creating a new entry but it doesn't save for some reason (my wife has the milestone x for alltel, works fine, I used tried to use her settings)
I have tried updating the prl, tried things like ##778 and all that, but none of these work for alltel.
Can anyone offer any help? Phone is almost worthless for me if I can have 3g and mms.
Thanks,
andyw123,
If you are subscribing to these service's that's something you should call Alltel / Verizon about. Verizon ownes Alltel I'am not sure if you know that.
{In early 2009, Verizon Wireless acquired Alltel, although the Alltel brand will remain until it is gradually phased out through the middle of 2009. Alltel was a large regional CDMA carrier offering service in 33 states, primarily in the south, midwest, and west. In 2005, the company acquired Western Wireless, a smaller carrier that operated under the Cellular One brand with service in 19 western states.}
Hope's This Help's
Thanks for the quick reply!
Ya, I tried that. They basically told me in a polite way that I shouldn't have taken a phone that wasn't part of Alltel's current line up and activated it on Alltel. Alltel told me that they could activate it, but couldn't guarantee that it would even work at all, which doesn't suprise me at all coming from Alltel.
I stopped at a total of 3 places, 2 alltel's and 1 verizon store. The first alltel told me they couldn't activate the x2 at all, but he tried, which messed up my current phone (he somehow deactivated it). Then went to Verizon next, they told me that I couldn't activate it at all because it wasn't part of Alltel's line up. Then I went to a corp store to get my old phone fixed, and somehow they were able to activate my x2, but with no data and no mms. Told me I was basically out of luck.
So, trying to decide if I should just sale the x2, which I don't want to do because currently the best phone Alltel has is the milestone x, which my wife has and it is dreadfully slow, slower than my old htc desire.
Anyone know of any other options that I might have?
Thanks
To access the programming menu open the dialer and dial ##PROGRAM the spc code is 000000
Sent from OH MY GOD IS THAT A SQUIRREL!
Thanks Juhde,
I've already been in that menu, made sure ALL (except for my phone number) settings matched my wifes milestone x phone, and still nothing. I'm not an expert, but sounds to me like it has something to do with the APN settings, which I cannot seem to change.
Funny thing about this is, I can "copy" the apn-conf.xml file or whatever it is called from the system/etc folder on the phone, and it shows my custom settings that should work (the same file was on my HTC phone, which worked). But, when I use the program from the market called "APN Shortcut" to view my apn settings, it doesn't show anything other than the verizon defaults. I have tried to add a new APN entry, but when I click save, it acts like it did save it, but no new entry.
I'm wondering if there is another location that is saving these entries and somehow verizon has figured out a way to bypass the default location to save apn settings. Later, I'm going to search on the phone and see if there is another xml file that contains those settings.
Thanks for the help!
I'm no expert at this, but a lot of the times "replacement" files won't function unless the permissions are set correctly. I'm not sure what the permissions should be for that file but you might want to look into it.
EDIT: after taking a closer look, the app APN Manager seems to be a better program for adding an apn. Wither it works I can't say but when I used it to swap apn it stuck after reboot.
Sent from OH MY GOD IS THAT A SQUIRREL!
This isnt alltel but i got my phone activated on another carrier.like you talk and txt worked. It wasn't until I flashed a few prl's and found one that got my 3g and mms working.mms still works spotty sometimes ,however.
I have 4 Verizon branded phones (mine is an x2) all using an alltel plan. I don't understand why you are having any problems at all
Do you mind give me some info from your x2? Like what the apn settings are set to and what prl you have?
Thanks!
i also have an alltel dataplan with an X2, no issues,
and no offense, but i dont know what is privileged info and what is not, so i wont be sharing
sorry
fischb22 said:
i also have an alltel dataplan with an X2, no issues,
and no offense, but i dont know what is privileged info and what is not, so i wont be sharing
sorry
Click to expand...
Click to collapse
WTF do you mean privileged info? I think he is just wanting to compare the numbers, what is he going to do with the info from your phone, besides compare to his current setup?
There is nothing that I can do with your apn settings or your prl version that you are running. This is just so I can see if my setting are the same as your working settings. I have compared them to my wifes Milestone X and they are the same.
On another note. Here is something wierd. I was able to erase all the apn setting from verizon (i think) and then I added the apn setting from my wifes phone, clicked on save, and then it went back and didn't actually save them.
The more and more I think about it, I am wondering if it is a PRL problem instead of the apn settings problem. Seems alot of people got this problem fixed on their phone by doing the prl change. Problem with that is, most people say to do a ##prl to fix it, that doesn't work on this phone. The only code I can get to work is *#*#program#*#* or something like that. So, anyone know of a way to manually change my prl on my phone?
The prl update number for Verizon is *228 since Verizon owns Alltel I think it's the same.
Sent from my Android device.
Ya, thats it if you want to download whichever one that want to give you, but it won't let me put one on there that I got, if that makes any sense at all.
Basically, is there a file location that I can copy it to or maybe a way to install it like I would a zip from recovery or anything like that? I already have the file download that I want to try to use, but basically going to try a few to see if I notice any difference.
p.s. Now I think my phone is actually only ringing part of the time, the other times it seems to go straight to voice mail even though I have 4 bars and not in roaming...
Thanks for the input everyone by the way!
Sooooo you have dialed *228 and it didn't work? Verizon also has forced and secondary prl update numbers. Try *22898 & *22899. Also what does your network banner say? Alltel? Extended network? If it says Extended network you might call Alltel up and ask them where the nearest Alltel owned tower for you is, drive to its area, reboot and try to update again. 3rd party towers *usually* don't carry the data encryption key your phone needs to activate the data plan.
Sent from my Android device.
Ok, well... I called both the other *228xx numbers, and I was greeted by alltel. I clicked on 2 and it said "Your phone already contains the latest update" and that was it. and as far as my banner, it doesn't actually "say" alltel, or anything like that. Just shows with the 4 bars, or a triangle if I am in roaming. I know from past that in a near by big city does have alltel towers around, and I was there but no difference.
So, still back to square one.
Thanks again for all your help!!
Another quick update. I finally found a way to update just the prl file. So, I tried 41003.prl and updated it manually (was not too difficult, just alot of trial and error). Phone worked just fine, but still no 3g coverage. Next I went to 31005.prl which is an actual alltel prl, but still the same effect - no 3g.
So, I went back to the latest prl from alltel which is 31011.
So, I am pretty sure that the prl file is not the problem. I guess now I need to figure out the apn setting issue that I am having, which is basically the default verizon settings are not working for me, even if I am in a verizon territory (like columbus ohio, big city). Using an app that was suggested to me on this thread I was able to delete the verizon apn settings fine. But when I went to create new apn settings, I went through it all and clicked on save, but it didn't actually save them. So, back to square one.
It would be nice if someone who is currently using a stock x2 from verizon on alltel would tell me what their prl version number is and their apn settings are (using an app like apn shortcut - found on the market).
On a side note. One difference I noticed. Looking at my old android phone (htc desire), it shows the same apn setting basically as my wifes phone, but the MNC number is 120, mine is currently set to 004, which is not changeable.
Several weeks later, and still no 3g data at all. Wireless works flawless, and phone calls work (actually phone works better than an alltel phone)
One thought that I had but not sure if I posted about yet...When I got the phone from the guy I got it from, he said he "thinks" it has a bad esn. So, I got it on a chance, afterall I could sell it on ebay for more than I paid for it with a bad esn. Anyway, if it does have a bad esn on verizon, I'm not entirely sure that Alltel would check it or even care about that. So, since alltel is owned basically by verizon, but still a separate company as of now, I wonder if verizon is blocking data access because it might have a bad esn.
I guess my next step is to call verizon and see if they can tell me if the esn is bad. I have tried a verizon store, and they were NO help to me at all, and actually very rude. Alltel just tells me that "I won't be able to get data because I am not using one of their phones" which is crap.
So, I think ultimately we have eliminated the prl possibility, apn is still my number one concern, but now I am leaning towards a bad esn. If that is the case, does anyone have any ideas on what I might be able to do with a bad esn? I know it is illegal to "change" an esn, and I don't think it is possible right now with the x2, but do I have any other options besides going back to my old phone (htc desire - not a bad phone, just want the larger screen and faster performance).
Thanks again everyone. Everyone has been alot of help!
If you wanna take drastic measures, search for a program called radiocomm, it's what motorola uses to program the radio.
A word of warning: if you change something with radiocomm and do it wrong the radio will become useless and the software is VERY complex to use. It could take you literally years to figure out but who knows, maybe you can find out exactly what parameter needs tweaking. I'd advise caution using radiocomm though. I just wanted you to know of the option.
Sent from my Android device.
So you know im in a wireless family.
I work at T-Mobile Corporate in Redmond, And my brother in New Jersey at verizon.
I personally use an optimus G SPRINT on Verizon Prepaid, Not that I dont like the T-Mobile speed, But lets be honest coverage sucks.
So the 1.5 to 2.5 MBPS nationwide I get on verizon is better. OK Back on point.
So my brother tells me Verizon is actively trying to combat the MIFI flashed to verizon prepaid, On mulitple fronts.
They have contacted ebay, and ebay sellers have been suspended.
And here is the one that sucks for all of us that use verizon prepaid.... They renew and send a new AAA Key every 4 to 7 days.....
And may also resend or renew the A-Key.
What that means for you if you are a verizon prepaid user and have a flashed phone but not the donor...... You sadly are screwed.
But I'm going to give you an easy fix, I have had to do it now twice.
You can also use QPST build 355 works for me, and copy all the data from the gusto to the other device.
Sadly my brother said they are not doing this targeting phone users, Verizon is not stupid they know people flash phones.
But they are targeting JETPACK and MIFI users.
He says in recent weeks they have seen Prepaid accounts that are using over 80GB of data a month on these supposed GUSTO's
So naturally verizon is now cracking down, This is similar to what Sprint and Boost Mobile did with ERROR 16.
Just giving you a heads up, And to flashers who flash the MiFi devices, Verizon is actively searching Craigslist and eBay, One eBay seller is now being sued by verizon and they found him on Craigslist in Salem, Oregon.
Just be careful, I use about 15GB a month on my Optimus and dont have any issues, Beyond having to reflash the info using the guide above once a week or so.
I also have seen less AAA resets when I keep the ROM Stock, And more resets and having to reflash when I got to a custom rom.
Hope this helps.
TechSoft said:
So you know im in a wireless family.
I work at T-Mobile Corporate in Redmond, And my brother in New Jersey at verizon.
I personally use an optimus G SPRINT on Verizon Prepaid, Not that I dont like the T-Mobile speed, But lets be honest coverage sucks.
So the 1.5 to 2.5 MBPS nationwide I get on verizon is better. OK Back on point.
So my brother tells me Verizon is actively trying to combat the MIFI flashed to verizon prepaid, On mulitple fronts.
They have contacted ebay, and ebay sellers have been suspended.
And here is the one that sucks for all of us that use verizon prepaid.... They renew and send a new AAA Key every 4 to 7 days.....
And may also resend or renew the A-Key.
What that means for you if you are a verizon prepaid user and have a flashed phone but not the donor...... You sadly are screwed.
But I'm going to give you an easy fix, I have had to do it now twice.
You can also use QPST build 355 works for me, and copy all the data from the gusto to the other device.
Sadly my brother said they are not doing this targeting phone users, Verizon is not stupid they know people flash phones.
But they are targeting JETPACK and MIFI users.
He says in recent weeks they have seen Prepaid accounts that are using over 80GB of data a month on these supposed GUSTO's
So naturally verizon is now cracking down, This is similar to what Sprint and Boost Mobile did with ERROR 16.
Just giving you a heads up, And to flashers who flash the MiFi devices, Verizon is actively searching Craigslist and eBay, One eBay seller is now being sued by verizon and they found him on Craigslist in Salem, Oregon.
Just be careful, I use about 15GB a month on my Optimus and dont have any issues, Beyond having to reflash the info using the guide above once a week or so.
I also have seen less AAA resets when I keep the ROM Stock, And more resets and having to reflash when I got to a custom rom.
Hope this helps.
Click to expand...
Click to collapse
Thanks for the write-up. Customers have been asking about this. So every 1-2 weeks? And nothing the customer can do without a reflash? Which phones do you use for donors?
This really only affects the mifi users. I keep a backup of my aaa and other passwords and they haven't changed in over a year. If for some reason you do have an issue dial *228 and it'll update for you on your evo 4g lte. Also I know I'm the pot calling the kettle black but mifi users use alot more data then any one else. I personally don't use them.
Asadullah said:
This really only affects the mifi users. I keep a backup of my aaa and other passwords and they haven't changed in over a year. If for some reason you do have an issue dial *228 and it'll update for you on your evo 4g lte. Also I know I'm the pot calling the kettle black but mifi users use alot more data then any one else. I personally don't use them.
Click to expand...
Click to collapse
Do I press 1 to program or 2 to update roaming capabilities?
susy1990 said:
Do I press 1 to program or 2 to update roaming capabilities?
Click to expand...
Click to collapse
1 reprograms your phone and updates the prl
2 just updates the prl
Asadullah said:
1 reprograms your phone and updates the prl
2 just updates the prl
Click to expand...
Click to collapse
OK so which one is a better choice. If I reprogram my phone will it mess up the talk and text in any way?
delete
Asadullah said:
1 reprograms your phone and updates the prl
2 just updates the prl
Click to expand...
Click to collapse
My phone is now roaming. If I take it off from automatic mode I have no service.
susy1990 said:
My phone is now roaming. If I take it off from automatic mode I have no service.
Click to expand...
Click to collapse
Your not really roaming it's the phone telling you it thinks that it's roaming due to sprints programing the phone. Turn off all roaming notifications in settings and change settings to allow all roaming. If that bothers you alot then flash the 53000 prl. But now you'll have your aaa keys good
Some Modded PRL's any1?
damastah said:
Thanks for the write-up. So every 1-2 weeks?
Click to expand...
Click to collapse
1-2 weeks where do you get that? He said every 4 to 7 days that seems to be at MAX 1 week or Did I miss something? I know the MiFi's i've reflashed last from 24hrs to 4 days max. While other's I know have had no issues for weeks after reflash
susy1990 said:
OK so which one is a better choice. If I reprogram my phone will it mess up the talk and text in any way?
Click to expand...
Click to collapse
First off Thanks for the Heads Up.
the OTA is Pretty self explanatory 1-Programs your phone & 2-Updates the PRL.
There isn't a good or bad choice it's either Program your Phone or if your phone is already programmed & you want to get the latest PRL you press 2(If you have a Verizon Android Flashed you won't get the roam triangle,The triangle is only if you have a non vzw android flashed over) but If any1 is worried about the roaming triangle or it just bothers you I have attached links to 4 different Modded PRL's that should remove the Triangle.
51807 PRL - The 51807 is an older Prl but Good. I know it works on alot of different Phones cause I have Flashed many many phones using this PRL all across the country
59317 PRL - The 59317 PRL is a newer PRL & I have used it but not on as much & not as many Phones as the 51807 just because it's newer. It is a good PRL as well but ymmv where you are with coverage so that's why I uploaded 4 diff PRL's
52979 PRL - I Have NOT USED this PRL
52515 PRL - I Have NOT USED this PRL
I use the 51807 & the 59317 PRL's when flashing phones to Straight Talk, Verizon PP, Page Plus & Next G. You can use these for ANY Carrier that uses Verizon's Network & they SHOULD work. I Hope they help some peps.
I am NOT Responsible for you, your phone, your actions or how you load these to your phone. So if you brick your Phone it is NOT my fault. Use QPST 2.7-366, CDMA WorkShop(use the Paid Version don't b cheap) or DFS to Load these. If you do a Google search you will find all of these
THANK YOU TO ALL THE SOLDIERS PAST & PRESENT!!! IF IT WASN'T FOR YOU
WE WOULDN'T HAVE WHAT FREEDOM'S WE DO HAVE.
THANK YOU & YOUR FAMILIES=Hand Shake​
Hi guys my question to yall is how do yall get the *228 to go through everytime I try it it doesnt give me a keypad to select 1 or 2 and than I tryi to dial *22890 and *22891 and nothing it gives me an error message if anybody help I would greatly appreciate it thanks.
*228 will NOT work on a flashed sprint device it will never get data on its own you need to use a doner for that sorry. but to answer your question just dial *228 and leave it alone for like 3-4 minutes it will ota but wont get data
I am seriously new at this so please bear with me. What does one do if they do not have QPST (can't activate/register). I have been trying for 4 months to get my ota data to work. My wifi is fine while at home but when I leave I have no data connection. I can make calls and my gps works. But I have tried everything ##7764726 *#*#4636#*#* get me into settings but I do not know what should or should not be in there.
PLEASE HELP ME,
Beth
7-24-14 Mifis Flashed to Verizon since the 6-10-14 Update
Hello,
Just want to let you all know that we do have the original and so far only confirmed solution for flashing mifis to Verizon at this time. We have the 2200 the LC11 and the 801 and 802 working and are now almost done with the 4510 and then we will be working on the 4620 after that
We also have the solution to fix throttled mifis and prevent Verizon from throttling them again. In fact Verizon can never communicate with the device after the throttling fix is applied. We have this working on the 2200 and will be porting it out to all other mifis.
Once we get all the mifis working again on Verizon we will be working on porting the throttling solutions over to phones
I know I don't post alot on XDA but I wanted to share this information with the whole flashing community rather then just keeping it over at CDMA Gurus where I usually post
You can check out our videos and services via our websites
www.flashedphones.net
www.flashedmifis.net
Also here are our dev links
Hope this helps
thanks
elisa191
De-Throttle Mifis
http://cdmagurus.com/thread22854.html
Flash Mifis to Verizon post 6-10-14
http://cdmagurus.com/thread22391.html
_______________________________________________________________________
UPDATE - 8-7-16
Just want to let everyone know that we have the 4510 solution now and the 4620 for both flashing and dethrottling these units to verizon prepaid accounts!
So thats just about all the mifis and now were about to start working on some new ZTEs