JasJam HERMES - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Hi,
I am trying to flash my JasJam with 2.60 but nothing happen.
may be I am doing something wrong, but I am quite sure I did everything
following the suggestion given.
Below the actual configuration and description about what is happening:
Mobile: JasJam I-mate
Rom: 1.31.305.2
Rom date: 09/08/06
Radio V.: 1.16.00.00
Protocol V.:32.53.7018.01H
Ext.Rom: 1.31.304.101
Model: HERM100
In the 3 colour screen (bootloader):
1st line: HERM100
1PL-SSPL by des
2nd line: HERM100
spl - 1.07 des (changing sometime in 1.09 when trying to flash)
I tried to flash and update my jasjam many time without any results.
I am able only to get at 3 colour screen (always with above line-info), after
that, and only with olipro 2.60, the screen is changing in gray colour and looks
like the update starting. But, mean while on PC I can see the blue line 100%,
the mobile is switching off and than restarting.
Of course, because of that I receive Communication Error.
Have tried also many other way following various thread. Nothing.
Can someone give me some help?
FYG, I succeeded in flashing two HTC Kaiser and one
HTC P3600 without any problem and cannot understand where I am wrong.
Many thanks in advance.

---

Power off then go into bootloader, check SPL then... Since it went through the progress bar (and believe me, SPL flashing is VERY quick) it may have worked. !.09 des is soft SPL. This ois used so you can flash yyour SPL layer without an error message showing up.
Unless you are a developer, it is advisable to only use Hard SPL ver 7 (shows 2.10olipro) as it has no real benefit for the everyday flashing junkie. It may actually cause you problems as at one point (I don't know if it was ever fixed) it threw up an error message after flashing that could cause concern if you didn't know it was normal.
My advise if you aren't sure, use the sd card method. Details & apps needed can be found on post #1160 of this thread - http://forum.xda-developers.com/showthread.php?t=296722
Cheers...

---

Many thanks for yours.
I have tried as per your suggestion (and as I did it before already)
Following appear:
1- mobile goes in bootloader
2- IPL and SPL as x my previous message
3- grey screen and very fast 100% image loaded
4- after that restart automatically and following appear on PC
(it is related to Framework and can assure you I have 2.0 installed)
Pls give me some more help. Thanks
System.UnauthorizedAccessException: Accesso al percorso 'C:\Documents and Settings\mici\Desktop\Nuova cartella (5)\RomUpgradeUt.exe' negato.
in System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
in System.IO.File.Delete(String path)
in RUUWrapper.Form1.button1_Click(Object sender, EventArgs e)
in System.Windows.Forms.Control.OnClick(EventArgs e)
in System.Windows.Forms.Button.OnClick(EventArgs e)
in System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
in System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
in System.Windows.Forms.Control.WndProc(Message& m)
in System.Windows.Forms.ButtonBase.WndProc(Message& m)
in System.Windows.Forms.Button.WndProc(Message& m)
in System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
in System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
in System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Assembly caricati **************
mscorlib
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.832 (QFE.050727-8300)
Base di codice: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
RUUWrapper
Versione assembly: 2.0.0.0
Versione Win32: 2.0.0.0
Base di codice: file:///C:/Documents%20and%20Settings/mici/Desktop/Nuova%20cartella%20(5)/RUUWrapper.exe
----------------------------------------
System
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.832 (QFE.050727-8300)
Base di codice: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
zip
Versione assembly: 0.0.0.0
Versione Win32: 2.0.0.0
Base di codice: file:///C:/Documents%20and%20Settings/mici/Desktop/Nuova%20cartella%20(5)/RUUWrapper.exe
----------------------------------------
RUUWrapper
Versione assembly: 2.0.0.0
Versione Win32: 2.0.0.0
Base di codice: file:///C:/Documents%20and%20Settings/mici/Desktop/Nuova%20cartella%20(5)/RUUWrapper.exe
----------------------------------------
System.Windows.Forms
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.832 (QFE.050727-8300)
Base di codice: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.832 (QFE.050727-8300)
Base di codice: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
mscorlib.resources
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.832 (QFE.050727-8300)
Base di codice: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
System.Windows.Forms.resources
Versione assembly: 2.0.0.0
Versione Win32: 2.0.50727.42 (RTM.050727-4200)
Base di codice: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms.resources/2.0.0.0_it_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------
************** Debug JIT **************
Per attivare il debug JIT, è necessario impostare il valore
jitDebugging nella sezione system.windows.forms del file di configurazione
dell'applicazione o del computer (machine.config).
L'applicazione inoltre deve essere compilata con il debug
attivato.
Ad esempio:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

---

Don't use pc, use the sd card method. instructions for how to do this are in the link I gave you - post 1160. Doesn't use the pc at all, no sync errors or problems like that. The only othe thing I could suggest is to use the unlocker V3a to unlock and super cid your Hermes... Heres the link - http://forum.xda-developers.com/showthread.php?t=293665
Flashing via the SD card is safer and easier than using the pc.....
Cheers...

---

Hi,
many thanks for your help.
I am now able to see following when enter bootloader:
IPL - 1.04
SPL - 2.10 olipro
Then try to upgrade ROM using any one found on the site for HERMES
but after 1% I receive Error Message : Invalid model ID (244)
Any more help pls. Thanks

---

Make sure the rom you are flashing is for the HERMES, the type of phone you have. Any roms taken off the wm06 forum on the hermes part of this site are ok. I believe you are trying to flash a rom for a different model phone...
You could also try using the unlock tool if you believe you are using a valid rom BUT Hard SPL WONT ALLOW a rom for another model to be flashed as this is a surefire way to brick your Jasjam...
I too have a Jasjam and haven't had any trouble using the roms cooked by the EXCELLENT chefs in this forum..
Cheers...
Glad you flashed Hard SPL before trying to flash an invalid rom, who wants a brick.....