i dont know why atom after upgrade windows mobile phone dead
now when i try connect usb to phone only read led nothing to display
how to recovery my phone alive again
thanks all
neocms said:
i dont know why atom after upgrade windows mobile phone dead
now when i try connect usb to phone only read led nothing to display
how to recovery my phone alive again
thanks all
Click to expand...
Click to collapse
try to reboot you device. if still nothing happen, it is better to "hard reset" your device. it means you will reboot you device into default manufacturer setting...
cheers...
i have the same problem, is there a way to flash a new bootloader to the atom life if it won't reach the bootloader screen?
its dead bootloader
you guys r facing the problem of dead bootloader... i also have my atom life dead from last 2 months....there r 2 ways u r revive ur atom life
1) replace u r board from service center (will cost u more than the cost of a new phone) around $400 USD.
2) reflash the memory of u r processor 4 that u need J-TAG cable & the flashing files(Jwflash) ....we have this on this forum but the procedure is only for atom & not for atom life so....pls wait till some one find the unique flashloader file for atom life flashing...
keep posting if u find any other procedure
Related
Hi,
My XDA II was up and running until I wanted to flash it with Wm2003se.
I not sure if the battery is fading out or what but the flash didn't conplete and I am left with the "serial 1.06 boot screen" I have tried numerous times of taking out the battery, letting everthing drain out and trying again. but it still goes back to the serial screen. Also activesync won't recognize the device and Windows XP picks it up as "Unknown Device". When I try and reflash it, I get the "communication error". Could someone dump thier Rom and/or instruct me on how to flash my device using my SD card?? Or if there is another way to revive my XDA II, I am open to anything. Thanks!!
Shane
Hi
Am also facing same problem on my O2 xdaII..it always shows serial v1.02
can any one help us pls..
tks isse
Hi
same problem whit MDA ll t-mobile de.please help
shane said:
Hi,
My XDA II was up and running until I wanted to flash it with Wm2003se.
I not sure if the battery is fading out or what but the flash didn't conplete and I am left with the "serial 1.06 boot screen" I have tried numerous times of taking out the battery, letting everthing drain out and trying again. but it still goes back to the serial screen. Also activesync won't recognize the device and Windows XP picks it up as "Unknown Device". When I try and reflash it, I get the "communication error". Could someone dump thier Rom and/or instruct me on how to flash my device using my SD card?? Or if there is another way to revive my XDA II, I am open to anything. Thanks!!
Shane
Click to expand...
Click to collapse
Come on....Somebody help us, we have a crisis club going on here!!!
did u guys follow all the intructions in upgrading the rom?
try this
disable activesync by ctrl+alt+del and kill wcescomm.exe by end process
make ur phone in bot screen
put ur phone in the cradle(with the power supply, so that ur bat will not drain).
usb should be in the display and not serial
make sure the 3 files(ms_ , radio_ , and nk) are in the same folder with himaupgrade.exe
run himaupgrade.exe
Wait about 5 processes i think. after the pc will let u know if it is done... get ur xda from the cradle and hard reset it (power button+reset button)...
if it doesnt work still im sory, im just a newbie, i just did mine.... maybe u should read more...
shane said:
shane said:
Hi,
My XDA II was up and running until I wanted to flash it with Wm2003se.
I not sure if the battery is fading out or what but the flash didn't conplete and I am left with the "serial 1.06 boot screen" I have tried numerous times of taking out the battery, letting everthing drain out and trying again. but it still goes back to the serial screen. Also activesync won't recognize the device and Windows XP picks it up as "Unknown Device". When I try and reflash it, I get the "communication error". Could someone dump thier Rom and/or instruct me on how to flash my device using my SD card?? Or if there is another way to revive my XDA II, I am open to anything. Thanks!!
Shane
Click to expand...
Click to collapse
Come on....Somebody help us, we have a crisis club going on here!!!
Click to expand...
Click to collapse
I assume you did a hard reset?? In the past three days I have gone from Windows Mobile 2003 >>> Windows Mobile 5 >>> back to Windows Mobile 2003 SE (SIN's magic version available here on XDA-Developers) which I like best of all (for many reasons, mainly speed and reliability). As someone else stated, you need to put it in the cradle AFTER deleting the old profile in ActiveSynch on the PC. Oh, and make sure you are using ActiveSynch 4 or higher. This is now available from Microsoft's site. :idea:
Dear All master,
I need help on my o2 Atom, when I upgrade it to latest version, it stop on stage 5: Burn in Radio Rom, 0%. Nothing happen even I had to wait for 1 hour.
I upgrade it with original atom rom from o2 site : 'Xda-Atom-ENG-20060426-MOT0822.exe'
The device stay in "O2" screen. this device can switch to diagnostic mode.
what should I do?
Note I repeated loading rom but Ietunai problem in Flash
Probably the Radio Hardware broken.... try to install without the Radio ROM.
sliders7 said:
Probably the Radio Hardware broken.... try to install without the Radio ROM.
Click to expand...
Click to collapse
from wher i can find that rom ?
or can u upload it ? for me plzzzz
http://pdaviet.net/showthread.php?t=17158
you can find how to flash rom without bootloader, extended rom , radio.
read my first post
medkid said:
http://pdaviet.net/showthread.php?t=17158
you can find how to flash rom without bootloader, extended rom , radio.
read my first post
Click to expand...
Click to collapse
but my phone is dead and it fail when i try to unpgrade it and it gave this eorr ===
!!!Please use DSUU in OS mode and syno with PC first !!!
usb transfer fail.
what shoud i do now plzz help me i dont know how to get it in DSUU mode its gose on boot loader but cant get it in to DUSS MODE
my Xda Atom Exec o2
waseemraj said:
but my phone is dead and it fail when i try to unpgrade it and it gave this eorr ===
!!!Please use DSUU in OS mode and syno with PC first !!!
usb transfer fail.
what shoud i do now plzz help me i dont know how to get it in DSUU mode its gose on boot loader but cant get it in to DUSS MODE
my Xda Atom Exec o2
Click to expand...
Click to collapse
u can't update using DSUU from activesync anymore. since u got broken ROM.
u must use Bootloader by pressing:
-power + camera + reset
-plug the USB
-start the update using DSUU.
sliders7 said:
u can't update using DSUU from activesync anymore. since u got broken ROM.
u must use Bootloader by pressing:
-power + camera + reset
-plug the USB
-start the update using DSUU.
Click to expand...
Click to collapse
i just do as u say but the but it fail gives the eorr as i told in my last post
and plzz tell me is i just have to get it in bootmode and conact it with usb and start updating
what is DSUU?? is this the file Xda-Atom-Exec-ENG-20060721-MOT0822 ? or what ?
Easy fix, check post #12 http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=EBOOT
more than likely you will need a 256 or 512MB SD Card, the method discussed here (in most cases) will not work with higher capacity cards. Check the Atom Wiki too.
homer285 said:
Easy fix, check post #12 http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=EBOOT
more than likely you will need a 256 or 512MB SD Card, the method discussed here (in most cases) will not work with higher capacity cards. Check the Atom Wiki too.
Click to expand...
Click to collapse
i tryied that too but still same postion.....
what shoud i do now plzzz help me i tell u again what it look like
====================================================
USB connected,waiting for download ..............
!!!Please use DSUU in OS mode and syc with PC first!!!
Usb Transfer fail
some one plzzzz help me ? for my atom exec
waseemraj said:
some one plzzzz help me ? for my atom exec
Click to expand...
Click to collapse
well...
after u see bootloader screen and waiting to download.
it should be ok to connect to USB and PC will recognize it for sure!
if doesn't... u should try different computer. not yours. just borrow somebody else computer... see the outcomes? just in case u got error/corrupted activesync.
if still not working... u must using SD card upgrade.
Use any ROM.. use WM5 Official ROM.
Extract the ROM.
put: diskimage_Ver.nb0 to the Blank SD card (use 512MB or 1GB)
and activate the bootloader again.
If your device are normal.. it should looking for SD card and start installing the ROM. If your device badly damage.. it will NOT run both method.
i don't know this is your hardware or Software are damage.
Maybe u should send it to the repair... hopefully u still got the warranty.
If Hardware is the problem, usually they replace the motherboard.
because no way to fix NAND memory module.
just keep trying... don't try one time only...
Good Luck & Pray!
sliders7 said:
well...
after u see bootloader screen and waiting to download.
it should be ok to connect to USB and PC will recognize it for sure!
if doesn't... u should try different computer. not yours. just borrow somebody else computer... see the outcomes? just in case u got error/corrupted activesync.
if still not working... u must using SD card upgrade.
Use any ROM.. use WM5 Official ROM.
Extract the ROM.
put: diskimage_Ver.nb0 to the Blank SD card (use 512MB or 1GB)
and activate the bootloader again.
If your device are normal.. it should looking for SD card and start installing the ROM. If your device badly damage.. it will NOT run both method.
i don't know this is your hardware or Software are damage.
Maybe u should send it to the repair... hopefully u still got the warranty.
If Hardware is the problem, usually they replace the motherboard.
because no way to fix NAND memory module.
just keep trying... don't try one time only...
Good Luck & Pray!
Click to expand...
Click to collapse
The above information will likely do more harm than good!
waseemraj said:
i tryied that too but still same postion.....
what shoud i do now plzzz help me i tell u again what it look like
====================================================
USB connected,waiting for download ..............
!!!Please use DSUU in OS mode and syc with PC first!!!
Usb Transfer fail
Click to expand...
Click to collapse
Bro I have recovered from this 20+ times, if its not working (and you can enter bootloader mode) then you're doing something incorrectly, either that or your memcard is incompatible, remember in most cases 256 or 512MB are the only working sizes! So place that EBOOT.nbo into and "empty" SDCard with your PC, enter the bootloader then stick the card in.... It wont take long, once you the screen goes black pull out the SDcard and then enter bootloader, plugin your USB and execute official O2 rom AKU2.2
The flash may not finish completely freezing in the Extended rom update, dont panic! unplug, softreset then flash in DSUU mode...easy as! works every time!
homer285 said:
Bro I have recovered from this 20+ times, if its not working (and you can enter bootloader mode) then you're doing something incorrectly, either that or your memcard is incompatible, remember in most cases 256 or 512MB are the only working sizes! So place that EBOOT.nbo into and "empty" SDCard with your PC, enter the bootloader then stick the card in.... It wont take long, once you the screen goes black pull out the SDcard and then enter bootloader, plugin your USB and execute official O2 rom AKU2.2
The flash may not finish completely freezing in the Extended rom update, dont panic! unplug, softreset then flash in DSUU mode...easy as! works every time!
Click to expand...
Click to collapse
Confirm!!!
I have done this also even using 1 GB memcard, my memcard is NCP mini SD.
I don't know it was lucky or it does work for 1 GB memcard. Even with non empty one.
But becareful, maybe I am just lucky, perhaps you should use 256 MB or 512 MB only.
homer285 said:
The above information will likely do more harm than good!
Click to expand...
Click to collapse
hei... he is desperately need help.
We all want to help him, thats all i can offer.
If you have different method.. thats a good news for him.
everybody here try to help him.. contribute something to help him.
so no more harm to his already broken device.
think the brighter side!
cheers
hi
i hav resolved the update utility problem but ow i hav tried to update it in bootloader mode in using usb cable and mini sd methode flashing , in the same case it's stopped at 16%.Someone can say me how to do for my upgrade gone untill 100% ?
thanks a lot
dune_973 said:
hi
i hav resolved the update utility problem but ow i hav tried to update it in bootloader mode in using usb cable and mini sd methode flashing , in the same case it's stopped at 16%.Someone can say me how to do for my upgrade gone untill 100% ?
thanks a lot
Click to expand...
Click to collapse
1. try changing USB cable.
2. redownload ROM, it may be corrupted.
yes but now i can't restart my xda. charges is on but don't wanna to start.and i hav ever try with usb cable.Wich rom do u think i hav to try if i can deblocked him ?
i done a brick test .it's ok.let's me know wich rom cuz all roms stop at 16%.thanks a lot
dune_973 said:
i done a brick test .it's ok.let's me know wich rom cuz all roms stop at 16%.thanks a lot
Click to expand...
Click to collapse
try downgrading first to original o2/MWG WM5 then flash to any cooked ROMs
i hav done a upgrade and after a hard reset my xda stay on 02 screen.nothing else
ok i hav download roms and all stopping at 14%.after a hard reset i have the screen 02 but after nothing else.
Someone can help me , when i done the upgrade, my device rom is 0.
I mind me if it's not a problem with bootloader in mn1 or because i try to make a upgrade where the rom is corrupted by the first flash i have done.
i forget something activesync don't work too.
Give me somes ideas .please
dune_973 said:
ok i hav download roms and all stopping at 14%.after a hard reset i have the screen 02 but after nothing else.
Someone can help me , when i done the upgrade, my device rom is 0.
I mind me if it's not a problem with bootloader in mn1 or because i try to make a upgrade where the rom is corrupted by the first flash i have done.
i forget something activesync don't work too.
Give me somes ideas .please
Click to expand...
Click to collapse
did you remove miniSD when you flashed via bootloader?
yes .same result.
I mind me something after read forum and wiki.my device is not locked and i should done a cid unlock or a hard spl ?
Cuz i hav download all rooms and each stop at 14% same in mini sd and each time i got the spash screen.
Someone can help me about this
dune_973 said:
hi
i hav resolved the update utility problem but ow i hav tried to update it in bootloader mode in using usb cable and mini sd methode flashing , in the same case it's stopped at 16%.Someone can say me how to do for my upgrade gone untill 100% ?
thanks a lot
Click to expand...
Click to collapse
kind to flash by boot loader ( ACTION+SOFT RESET ) by USB cable ,if you use
SD card it risk to brick atom.
I try to up rom atom life. Use official rom wm6. while it up untill 17% computer was shut down. Now my atom show "Please plugin the cable and re - enter the eboot" . Then I connect to computer again and Start to up rom again but it show connection error.
Anyone please help me
I also had same problem like you a few months ago,but i am not sure what i did to correct the problem. but if i'm not mistaken, what i did is i download any cooked rom that available in this forum and suitable for my pda (atom life). Then i transfered it into my external memory. and first i upgrade my pda to the cooked rom. this process does not require for connection to computer as it require the pda alone. you may try this. after you have upgrade it, you may connect back to your computer and upgrade back to the original rom that you want before. but make sure before you upgrade you have at least 70% battery. good luck. sorry for my bad english,hope you understand.
esygo said:
I try to up rom atom life. Use official rom wm6. while it up untill 17% computer was shut down. Now my atom show "Please plugin the cable and re - enter the eboot" . Then I connect to computer again and Start to up rom again but it show connection error.
Anyone please help me
Click to expand...
Click to collapse
Here you go how to:
- unploug battery about 2 minutes
- replug battery
- go to bootloader again
- restart computer
- flash again
That will work,. dont worry,.
BR
thank you
Thank for your help. It work now.
Hi guys,
I flashed WM 6.5 to ma Atom. But right now, it's not working, even bootloader mode. I tried many times CAMERA+ RESET (stylus) then inserted batt. But still nothing happens. Do you guys know what shall i do? I think ma device not dead, because - when i connect to charger plug, the LED light is blinking as i insert batt.
Thanks, waiting your advices.
Eku
im also having the same trouble too...i was flashing my atom using SD card flashing method but then halfway through it it went blank screen...so i took off the battery...now it cant even be switched on...is there anyway to save it now??please please...any assistance is much appreciated...thanks!!!
+1 with the same problem... i searched the forum n found this guide
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
but i couldnt rly figure it out...
adnan_efe said:
+1 with the same problem... i searched the forum n found this guide
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
but i couldnt rly figure it out...
Click to expand...
Click to collapse
you must have basic electronics skills to build the cable from the article and connect to your phone via self made cable with pc and then using the files and drivers attached you can restore your boot loader..if you aren't sure that you can do it by yourself I suggest to send your phone to phone repair shop, where probably they can do this.