Guys I tried updating the Rom many a times of my O2 xda Atom with the help of PC and Active Sync for more than 10 times n worked fine...But this time I tried updating from the mini SD Card and found out the atom bootloader Dead...Somehow I revived it with the help of Jtag n Jflash methord provided by Alex_Beda & 1stMASTER and now atom is working fine(thanks to them)...
The conclusion is never try updating from Mini SD card....
Related
Hope anyone can help me - i' am still stuck - after trying and reading posts for 6 hours. i tried to flash the touch flo w6 rom on my charmer. activesync disconected during the flash proces. charmer does not start anymore - but i can get to bootloader screen.
But all roms i found and tried to flash need an activesync connection. could someone pls let me know how to flash from bootloader without active sync and where to find such a rom - if possible a w6 - if not w5 is also very very welcome!
Thanks a lot in adv!
are you using Vista ?
Good morning Urkraft!
Actually I do - but if nessecary I have ease access to a Computer running XP.
you need to use a PC running XP, then please try to flash the base ROM as Vdlock mention in his thread : http://www.tm-phonedownloads.com/fil...ileUK_Ship.exe
Reset to bootloader then connect teh USB cable to an XP machine and run teh above shipped ROM installer
Please make sure you do this before your goes flat, if you notice now it might not be even charging ...
Charmer is running again! Tks a lot Urkraft
And yes - I tried again - WM6 is running fine!
the link doesnt work is there a new one?
The link is dead... Please.... somebody help
Please update the link, it's dead and i'm in really need. Thanks in advance!
Hi
i had an imate jamin and i tried to upgrade it to wm6 today. but after i performed a hard reset my device has stucked in the imate blue screen and didnt boot!!!!
i managed to enter the three color bootloader screen by pressing the camera button while restarting the device, then i ran the RUU_Prophet_220734_2207114_024721_NVID but it constantly gives me the error 260 (cannot connect to device).
i am using vista
what can i do now???
please help meeeeeee!!!!!!!!!!!
can you please stop using words like pleaseeeeeeeeee,help meeeeeeeeeeee?
can you please start reading the wiki first?
can you please read the wm6 upgrade guide second ?
if you have done all of the above,did you understand not to upgrade your device under windows vista,and try to do it under windows xp,because wmdc is causing troubles with rom update utility?
thanks for attention.
Heyyyy
I used xp now but still the same problem
can anybody help me???????????
do you have activesync installed on your windows xp?
yes
i have installed activesync 4.5
but
it cant recognise my phone because my phone just cant boot
even when i try the 3 color bootloader screen (soft reset + camera key)!!!!!!!
any advise on how to fix my imate jamin??
To the user with all the Eeeeeeeeeeeeeeeeeeeeeee's...
Try to look into Wiki, like other members have suggested.
Then you might try to use the search functions in this forum.
And maybe after you have tried these options, you could look into similar cases - like for instance this one: http://forum.xda-developers.com/showthread.php?t=337003
for instance...
I am using CE OS 5.2.20753 Build 20753.1.4.0 PV SB on O2 Atom Exec. I am trying to flash my ROM with any of the provided ROMS in this forums rite from WM5 till Jamies latest ROM.
As a background, I have already configured my mobile in VISTA laptop using the MANUALS & RAR files, provided around a year back.
The problem is as follows:
1. I run the package, which internally unzips all the files in C:\Windows\Temp
2. DSUU starts executes and provides a screen to select OS, OS+Extended ROM, OS+Eboot only, etc....
3. I tried using both ALL, OS only, OS+Extended ROM but i get the error as mentioned below.
4. I get a screen which speaks about all the my current RADIO, ROM version and the TO BE new versions.
5. I select OK / Continue.
6. Program reboots my Atom exec and stucks in "USB CONNECTED" black screen. This continues untill i try to manually terminate the DSUU process.
7. To recover from this, I remove the battery manually and insert and start the phone.
8. Phone starts working from the stage where I started flashing with new ROM.
I am totally confused as i tried a lot of ROMS rite rom Wm5, WM6 & WM6.1 which also includes all the ROMS, which i have already used in the past on the same phone.
Gurus, please suggest the possible wayout, as i am stuck on this ROM for a long time and unable to test all these new wonderful ROMS.
ASH
use win xp not vista in flashing roms...
Use the search function, there is an answer to Your question in some of the forums at xda-developers and it is posible to flash roms from VISTA, but after doing some reinstalation on USB drivers and some tweaking....try to find VISTA ROM UPGRADE
My experience is:
I followed the instructions and they worked 2 times and I have flashed the ROM twice, I dont know what happened to my computer because after that never again make it to work in vista.
I whish You Could!
Thanks
Thanks for the suggestions. I have flashed this mobile around more than 20 times out of which atleast 10 times in Vista.
My problem is, after flashing the current ROM, i am unable to flash on this device. i tried flashing other device from the same laptop and it works
When i start the flashing procedure, mobile enters into Boot mode and then nothing happens. i remove battery and mobile boots up with the same old ROM.
Please helppppppp
ASh
just want to share with all of u about my Atom situation and pls don't try it!
When i got my atom, it's running Windows mobile 5 then i upgrade to 6 by jiggs coz can't found 6.1 clean one.
after several days of searching, i found Atom Rom 6.1 from Helloword1 (only diskimg.nb0) then i download pc update from his threat to update. i perform all update, it complete successfully.
i want to try rom from hp witch is recommend from Helloword1 to hp user, i found that the hardware of hp and atom are the same so i want to try that rom even there is warning from other user here.
i also download the atom kitchen of atom, put diskimg.nb0 to ROM directory in the kitchen then run Build Rom.bat when rom is generate i flash it to my atom using pc update from HP. this time i forget to delete Eboot.nb0 for HP so while updating My atom boot loader become HP logo that time i dare not to disconnect it from usb coz m afraid to brick my device, i wait till it finished
after reboot my atom's boot loader become HP and 02 Welcome screen!
i can aligne screen to complete windows setup but every apps not working even sync.
i try to search forum but no solution.
try to flash from SD card as suggest from Helloworld1 still can't
Then i take out the battery and press Send and End button for a while put battery back, it goes to HP boot loader then fasten i connect to pc this time i flash with HP ROM it's finished successfully but i can't even aligne screen but when i plug to my pc, it's connected so i have some hope to flash back to atom using Jiggs ROM
everything working fine now even boot loader
Now i flash back to Helloworld1 (atom rom)
dolphinxda said:
just want to share with all of u about my Atom situation and pls don't try it!
When i got my atom, it's running Windows mobile 5 then i upgrade to 6 by jiggs coz can't found 6.1 clean one.
after several days of searching, i found Atom Rom 6.1 from Helloword1 (only diskimg.nb0) then i download pc update from his threat to update. i perform all update, it complete successfully.
i want to try rom from hp witch is recommend from Helloword1 to hp user, i found that the hardware of hp and atom are the same so i want to try that rom even there is warning from other user here.
i also download the atom kitchen of atom, put diskimg.nb0 to ROM directory in the kitchen then run Build Rom.bat when rom is generate i flash it to my atom using pc update from HP. this time i forget to delete Eboot.nb0 for HP so while updating My atom boot loader become HP logo that time i dare not to disconnect it from usb coz m afraid to brick my device, i wait till it finished
after reboot my atom's boot loader become HP and 02 Welcome screen!
i can aligne screen to complete windows setup but every apps not working even sync.
i try to search forum but no solution.
try to flash from SD card as suggest from Helloworld1 still can't
Then i take out the battery and press Send and End button for a while put battery back, it goes to HP boot loader then fasten i connect to pc this time i flash with HP ROM it's finished successfully but i can't even aligne screen but when i plug to my pc, it's connected so i have some hope to flash back to atom using Jiggs ROM
everything working fine now even boot loader
Now i flash back to Helloworld1 (atom rom)
Click to expand...
Click to collapse
Congratulations! You saved your device from yourself! (I'm joking )
Too much interest history, man...I'm thinking, perhaps, you can SD flash bootloader only (ATOM, of course) for the next (if becomes), starting the HP's bootloader with an ATOM Eboot inside your mini SD. I don't know sure, but perhaps runs ok.
I'm totally agree with you that it's needed more info for people (specially newbies than I'm) about cooking tasks, procedures, kitchens for HP's 68xx.
Not only for customizing pourpouses, also for translations issues. Seems a lot of people are interested in to use some roms in their own language also, not only english.
If this becomes, I guess a bit more projection & bussiness for people that hardly develope these nice roms.
zen_usuario said:
Congratulations! You saved your device from yourself! (I'm joking )
Too much interest history, man...I'm thinking, perhaps, you can SD flash bootloader only (ATOM, of course) for the next (if becomes), starting the HP's bootloader with an ATOM Eboot inside your mini SD. I don't know sure, but perhaps runs ok.
I'm totally agree with you that it's needed more info for people (specially newbies than I'm) about cooking tasks, procedures, kitchens for HP's 68xx.
Not only for customizing pourpouses, also for translations issues. Seems a lot of people are interested in to use some roms in their own language also, not only english.
If this becomes, I guess a bit more projection & bussiness for people that hardly develope these nice roms.
Click to expand...
Click to collapse
Thanks for ur commend man! i also tried to flash Eboot.nb0 fro SD card on that time, after place Eboot.nb0 on sd card, Enter boot loader by taking out battery Press Send + End button for a while, put battery back.
it show HP boot loader around 5 to 10 minutes, restart, every the same.
please Sir dolphinXDA
Sir can u give me a 6.5 ROM with procedure ? im just new here just bought an old atom secondhand from an old neighbor .... i used o2 mini before but it was lost now because someone robbed it inside my bag when i was asleep inside the bus from school ...please sir i want to try 6.5 ROm and very excited i also like rom by legalmantra if u dont have it just any 6.5 ROM with procedure...please help me Sir , thanks and more power ....
dolphin XDA pls help sir
Sir can u give me a 6.5 ROM with procedure ? im just new here just bought an old atom secondhand from an old neighbor .... i used o2 mini before but it was lost now because someone robbed it inside my bag when i was asleep inside the bus from school ...please sir i want to try 6.5 ROm and very excited i also like rom by legalmantra if u dont have it just any 6.5 ROM with procedure...please help me Sir , thanks and more power ....
playvoice_17 said:
Sir can u give me a 6.5 ROM with procedure ? im just new here just bought an old atom secondhand from an old neighbor .... i used o2 mini before but it was lost now because someone robbed it inside my bag when i was asleep inside the bus from school ...please sir i want to try 6.5 ROm and very excited i also like rom by legalmantra if u dont have it just any 6.5 ROM with procedure...please help me Sir , thanks and more power ....
Click to expand...
Click to collapse
Sorry guy m not a cooker, m a user like u too. what i wrote above just a sharing with u guys. it's a mistake coz i want to use rom that is stable for HP.
I have tested all 6.5 ROM from PDAViet but bluetooth and wireless not working well, on the other hand rom from PDA Viet not a clean one.
Now day i still using 6.1 from Helloworld1, may i recommend you to use 6.1 by Helloworld1 till we can found 6.5 clean ROM like Helloworld1?
hello my huawie s7-721u is dead and i can not use the firmware on sd card to repear it
is there any solution ?
sorry for my english
Still not working mine s7-721u. I tried hard reset and now we need official and original rom.. how about you?
Mee too.
My Youth 2 died completely. Doesn't respond to anything. USB connection says "no driver" and I can't find a driver
I also need firmware
I got soft brick, so I need official firmware for s7-721u c364bxxx????
huawei s7-721u dead after performing the sdcard flash.
so what to do now