hi
i tried to install wm6 on my hermes via sd card when i pushed the power button
the device won't turn on i tried charging it but it won't charge
please help
Related
I have a big problem. Yesterday I tried to upgrade my atom to the latest rom. Everything went ok up to 22 %, then my Atom rebooted and after that my Atom can’t boot up. The screen is black and the only thing that happens when you try to turn it on is that the Atom starts to vibrate. I have tried to soft reset, hard reset and boot to bootloader but nothing happens.
Does anybody have an idea of what I can do to start my Atom?
/D
Dead Atom
Try this
Remove battery and sd card. Leave it for sometime say about half an hour.
After that while pressing camera button+soft reset insert battery after 5 sec release soft reset, keep holding camera button. Atom should go to boot loader.
Connect to usb and run upgrade.
same problem
while flashing rom got reboot after that i don't even get the startup logo of o2
while connecting it 2 pc usb cable orange led show it is charging but no display plz hlp
same problem
check your battery pack . If your battery is dead the Atom Life act the same way as U describe - LED show charge and black screen. Have been there, when battery is replaced it is working fine again.
Hi all....i'm totally new at this PDA stuff.
Just bought atom pure, and I wanted to add some useful softs into it.
When the atom still plugged into USB, I push the reset hole and suddenly..DEAD
It wont turned on again when I push the power button. Already try to hard reset and still dead, Already try to take battery for while and still wont turn on.
Please help me guys!!
i'am have a O2 XDA ATOM. my atom just blink screen and not load to system after empty battery, I use Windows Mobile 6 Kumara Edition.
anybody, please help me ... ! i'am not load to bootloader, so upgrade rom is imposible.
Please watch my video in youtube " O2 XDA ATOM PROBLEM AFTER EMPTY BATTERY"
http://www.youtube.com/watch?v=ZM8DPVejXsE
my youtube video for my atom problem.
Edit/Delete Message
have you dropped it recently?
have you tried to flash Atom EBOOT.nb0 via SD Card yet?
take out the FULLY CHARGED BATTERY and depress power+SR simultaniously, at the same time insert your battery then release buttons.
I have tried to flash Atom EBOOT.nb0 via SD Card ? Don't Work because bootloader not load
Power+RS button same with Power + Camera + Reset button or No.
I Have Tried Power + Camera + Reset Button don't work.
Do You Have any solution ?
MY HP6815 IS DIED.
I was flashing with the good wm5 rom of NHOCBANME when the phone fell to the ground and has detached the battery!!!
My hp 6815 is off and doesn't turn on.
I tried to flash by ordinary mode but the phone is always off.
Only battery led is on if the phone is charging.
I think it is permanently damaged.
Can someone help me?
Test:
1 - Remove the batery...wait some secounds
2 - Put the batery back on it
3 - Press POWER
4 - Press RESET with stylus and press the 2 softkeys (the keys that are on top of the red and green buttons)
5 - The phone will enter flash mode
6 - Use software to re-flash or use SD card to do it(SD card option: card must be inside when you do this!)
The same thing happened to me... but i lifted the cell and there was no cover in the battery...
hope this helps...
Dead boot ?
Hello,
I have a same problem after flashing. No life in my 6815.
The LED used to blink orange when charging or usb connected but now it flashes orange-green. Does anyone know how i need to fix my boot with jtag or other fix?
Many thanks
A free TUROK game[Newest turok game out last year] for whoever helps me fix my bootup. Game is boxed, manual etc.
Thanks to GraeFNZ (and helloworld1)...This is the correct procedure:
" How to recover from semi-brick state:
1. Prepare a sd card with proper diskimg.nb0.
2. Pull out the batter for a few minutes.
3. Press and hold two "-" button and at the same time, put the battery in.
4. Wait a few second and release the button, then after a while, the device will be in bootloader mode. "
I have the same problem with 6815
Hello, I'm new to this forum I have problem with 6815, it's completly dead after trying to put wm 6.5 on it. I have tried to pull out battery, to put it back, to press "-" keys, to reset... but no succes. It's dead. Battery is fully charged. It's showing charging status when I conect it to the charger or USB PC port. Anyone, please help, doing it for a 2 days, my head and stomach are ruin...
hello,
i have a problem with my TG01... i did a hard reset on it and when it went back on...after the TOSHIBA logo in the begining just when it shows the Orange logo...it gets stuck...i tried to unbrick it using this method: http://forum.xda-developers.com/showthread.php?t=682480
but when i try to power the phone...it just gets stuck to the orange logo and my W7 won`t see any drivers or devices...pls need help
Follow these steps:
YOU SHOULD HAVE THE TG DOWNLOADER INSTALLED ON YOUR PC
1- You need to take out the Sim card and memory card
2- locate the pins under the sim card, there's a small black plastic cover, take it off
3- put the battery back and connect ur phone to the pc
4- short circuit pins 1+3 while pressing power button
5- the PC will ask for drivers press automatic
6- start downloading software as per the thread
Hope this revives your phone
Take out the micro sd card and try then.If not after taking out the card give a hard reset.