Problem with "arrow" keys - G4

Hi
sorry for my bad english, hope you can understand me .
i have a G4 and flashed a Xion Rom.
But before and after the flash i had the same problem.
When i turn the telephone on the "down" button on the front ist pressed.
When i press the button really (or any other button) it stops.
Now when i turn off the phone (short click on the off button) and on again,
it starts again.
The Behavior get's really funny when i slide the G4 open, also the down button is pressed (when it's closed it would be the left button).
There's no warranty left, because the phone is too old.
So anyone else had the same problem and a suitable solution?

Related

Menu and Back Button BROKEN ?

I didn't find anything about that, but it seems that I have a problem with Menu and back button... mainly the back button.
Normaly, when a I press menu or back button, both illuminate. Since today, sometime, only the menu or back button illuminate. The one that does not illuminate is not working.
I tried to press everywhere on the phone, shake it, removing sim, rebooting, etc... didnt find what cause that. Could be hardware or software (I have stock rom).
Anyone have seen this?
Thanks !
well... playing a bit with it today. I hold it flat in my hand, turning left or right... light were blinking on menu or back button... sound like hardware problems

HD2 Hardware buttons not working?

I have a bizarre problem with my HD2, which seems to be hardware based ... kind of....
*Sorry if this ends up being really long*
Basically my Volume up and down buttons have stopped working along with the windows button and "back" button.
However, the "home", "call" and "end call" buttons still work, but not properly.
When the phone boots you can briefly see the windows (not HTCSense) volume indicator pop up just before Sense loads, which didnt used to happen.
Once the phone has loaded up only the call, home and end call buttons do anything, they light up the buttons when pressed, and the "home" button does indeed take you "home" and the "end call" button locks the phone and turns off the screen, however, pressing the "call" button doesnt bring up my call list, I have to use a soft key.
I also cannot bring up the hard reset menu, holding the volume keys and booting doesnt do anything, which is why i think its hardware based???
Another interesting problem is that the "up, down, left, right" soft buttons dont work on the keyboard (since this all started)
I had this issue about 6 months ago, I flashed my phone, to no avail .... but about 6 hours after flashing it, it just started working.
The only think I have tweeked on the phone really is installing CHT as I've been booting to Android for the last couple of months, which now I cant do as it hangs after about 5 seconds of booting.
ANY suggestions would be great.
Same problem here I got the phone from craigslist and same problem as above. Can anyone tell as if is hardware or software related problems and if anyone solve this before ?
Any help will be much appreciated.
Sorry I've only just replied, but I ended up having to send mine to HTC, they ended up replacing the main board (apparently). So definately hardware. Sorry bud.
Sent from my HTC HD2 using XDA App

[Q] Jetstream does not power ON - Stuck !!!

Need some help !
The HTC Jet stream does not power on - strange problem.
Unit used to work perfect till today - however suddenly the unit does not power on.
1. Battery is fully charged
2. The orange led on the power button is "on" even when its NOT Charging
3. pressing the power on does not do anything.
Tried several things, like doing a "hard reset" from the buttons, by pressing the volume down and at the same time pressing or holding the power - NOTHING help.
The ORANGE screen on the power is "on" with the charger or without it.
Any of you guys have a smart idea to try ?
Anyone know if there is a "hidden" reset button ?
problem was solved !
press & hold the power button for 20 seconds & at the same time press the volume button.
This has released the "stuck status" and the jet stream has back to live as normal.
FIXED!!!
itzik-g said:
problem was solved !
press & hold the power button for 20 seconds & at the same time press the volume button.
This has released the "stuck status" and the jet stream has back to live as normal.
Click to expand...
Click to collapse
Thanks Itzik I have been having the similar problem for sometime now. I tried your solution and firstly I got the AT&T Think Possible screen for about FIVE minutes, then it powers up to Home Screen.
Thanks
Pls help my htc Jetstream is starting but it's touch screen is not responding to any touch please help ,my email [email protected],mob what's app+91- 9421392453 thankyou
My HTC Jetstream will not stay powered on, when I push the power button the tablet will briefly power on I see the HTC screen for a few seconds and then the tablet powers off and it will then power on and then off every few minutes but will not stay on. Please help!!!

[Q] How to fix the power button

Hi guys, i think the power button of my I9300 is broke, the button is pressing every time so the phone keeps rebooting, is there anything i can do to fix that? Like an app to switch the function of the buttons and "disable" the power button? So i could, for example, turn on my phone pressing the Home Button or something. Thanks and my english is bad, sorry.

GApps error after installing Phone no longer starts.

Hi all.
I have a phone Samsung 920I not "L"
OK to start from the beginning. I am new to this and followed steps from watching Channel48 on YouTube. Not blaming him it's just so you have an Idia of where I got my info from.
Instlled Odin
I installed twrp-3.1.0-0-zeroflte.img and it didn't work.
I then found twrp-3.3.1-0-zeroflte.img and installed it over the top, Now works when booting into recovery.
I then installed 920F Samsung recover file that was only about 25Mb in size and got my phone working again.
left it for a day then tried again.
Installed twrp-3.3.1-0-zeroflte.img with Oden. works
Installed: EvolutionX_4.1.69_zerofltexx-10.0-20200331-0232-OFFICIAL Works I was happy Looked at "About" and it now says my phone is 920F :/ Andoird 10 cool it works so who cares if it says 920F right!!!
I then booted back into Recovery and Installed: open_gapps-arm64-10.0-pico-20200228 and that said it successfully installed and I swiped to restart the phone.
My phone powered off and that's where this ends.
I have tried holding the power button for about 30sec and nothing happens I tried plugging into the charger and it doesn't respond to show it's charging
Is there something I can do now or is the phone dead This is my main phone as I love the Samsung S6 over the rest because it has the main buttons, not on touchscreen and IR so I can use the phone as a remote.
Thanks
edit. update
I got my phone working again. I will leave this thread incase someone else asks the same thing.
How I got my phone to work again. This is what I found on Google search and I will BOLD the option that turned my phone on.
Press and hold Power button for more than 20 seconds to check whether it turns on your phone or not.
Press and hold Volume Up button for a few seconds and without releasing the Volume up button, press and hold Power button until your screen displays something.
Press and hold Volume Up button for a few seconds and without releasing the Volume up button, press and hold the Power + Home buttons until your screen displays something.
Press and hold Volume Down button for a few seconds, without releasing the Volume down button, press and hold Power button (totally 2 buttons) until your screen displays something.
Press and hold Volume Down button for a few seconds and without releasing the Volume down button, press and hold Power button + Home button until your screen displays something.

Categories

Resources