About the Beta WM 6.5 Version 1.1
Sorry and thanks for tryin it, obviously gotta try something else. Of course you can get out of that, just put phone in bootloader, (power + camera + reset) you can flash from there using Micro SD method or plugging into computer and flashing via Rom Update Utility (RUU). Again thanks for testing this.
Gave this a shot but it doesn't boot for me. I get to the black-on-black windows logo with HTC underneath, and it just hangs there. Not sure if I am supposed to wait for something or not.
Hopefully there's a way to revert back or flash another ROM if it is bust
RyanMogul6800 said:
About the Beta WM 6.5 Version 1.1
Sorry and thanks for tryin it, obviously gotta try something else. Of course you can get out of that, just put phone in bootloader, (power + camera + reset) you can flash from there using Micro SD method or plugging into computer and flashing via Rom Update Utility (RUU). Again thanks for testing this.
Click to expand...
Click to collapse
I can't seem to get to bootloader mode anymore either. Holding power+camera and resetting just soft-resets. I can still hardreset, but it doesn't help anything
Never mind false alarm... my first forced bootloader and I was using the wrong power button (I tried the face button, not the side button, whoops!)
Related
Hi all.
Really need some help here. I'm trying to flash ROM with Medkit wm 6.1 but I'm falling over at the first hurdle - I am not able to enter bootloader mode.
I've tried these key combos:
camera+reset - release reset and keep camera button held
camera+vrecord+reset - released reset and kept other buttons held
power+reset - this flashes the rom but with standard factory ROM
and pretty much every other possible key combo
As I understand it it's cameria+reset that is supposed to be the correct way of getting into bootloader mode.
BTW, I'm using a FAT formatted 256MB SD card and have copied the AL1.dio and boot directory int the root dir of the card (as per medkit's instructions)
Oh, and my Atom is an MWG Life.
Where am I going wrong?
Any help would be much appreciated.
Thanks in advance!
hubbards said:
Hi all.
Really need some help here. I'm trying to flash ROM with Medkit wm 6.1 but I'm falling over at the first hurdle - I am not able to enter bootloader mode.
I've tried these key combos:
camera+reset - release reset and keep camera button held
camera+vrecord+reset - released reset and kept other buttons held
power+reset - this flashes the rom but with standard factory ROM
and pretty much every other possible key combo
As I understand it it's cameria+reset that is supposed to be the correct way of getting into bootloader mode.
BTW, I'm using a FAT formatted 256MB SD card and have copied the AL1.dio and boot directory int the root dir of the card (as per medkit's instructions)
Oh, and my Atom is an MWG Life.
Where am I going wrong?
Any help would be much appreciated.
Thanks in advance!
Click to expand...
Click to collapse
actually the right way for your atom life is Record (hold) + reset -> realease reset, it'll enter bootloader mode
medkid said:
actually the right way for your atom life is Record (hold) + reset -> realease reset, it'll enter bootloader mode
Click to expand...
Click to collapse
Did that as well, still cant seem to enter bootloader. It will just perform a normal reset. Does this mean my bootloader is corrupted?
got it already. I actually need to keep holding the record button while releasing the reset button. else it will just does a normal reset
I have no Idea what to do it look like Memory Clear and SPL come up for a split second then it just goes to boot screen and hangs up with Radio Info I have tried to boot from SD also any Ideas? I was using Ski's Max Thanks
Madhat23 said:
I have no Idea what to do it look like Memory Clear and SPL come up for a split second then it just goes to boot screen and hangs up with Radio Info I have tried to boot from SD also any Ideas? I was using Ski's Max Thanks
Click to expand...
Click to collapse
It seems that it is stuck in bootloader. Try to flash a stock rom and see if it solves the issue. Remove any sd card you may have in there. More than likely, you flashed a rom for another device or your phone ran out of battery during the your last flash.
egzthunder1 said:
It seems that it is stuck in bootloader. Try to flash a stock rom and see if it solves the issue. Remove any sd card you may have in there. More than likely, you flashed a rom for another device or your phone ran out of battery during the your last flash.
Click to expand...
Click to collapse
It will not even get out of the Steam Rom Boot screen so usb will not work and and a SD load will not either I think I'm done
Thanks
Madhat23 said:
It will not even get out of the Steam Rom Boot screen so usb will not work and and a SD load will not either I think I'm done
Thanks
Click to expand...
Click to collapse
Try to put it in the tri-colored screen (bootloader), connect the device to the computer (the writing on the screen will change from "Serial" to "USB", then try to flash. Good luck!
Same happened to me.. This is what I did
Same thing happened to me from using Ski's Rom with Max Dusk.. The rom would freeze and I would have to reset multiple times then one day it wouldn't do anything
This is what I did
1. hold down the Power, Vol Down, and the Enter key (which is the middle of the scroll circle)
2. hold these down until it asks you to press one of the vol buttons (I think it was up) to revert back to the last rom that was loaded this will Hard Reset the last loaded rom
3. after doing the Hard Reset, get an SD card and make sure it is 32 bit formatted so that you can Hard SPL using the SD card
4. after it is unlocked, copy your stock carrier rom onto your SD card and call it RAPHIMG.NBH (the phone will use this rom to flash when in tricolor mode)
5. Put your phone into tri-color mode by holding Power, Vol Down, and the reset button underneath
6. follow instructions on screen and dont reset until the screen says it is complete
you now have a reflashable phone or at least one that works
sorry details are sketchy, and I can't link the original threads right now, but this worked for me
Hi all,
Once again, I've hit a wall with my phone. I apologize ahead of time for the length of this post, but i want to be very clear about what happened so I can get it resolved as soon as possible. Also, I have searched for hours to find an answer to this problem, but I've failed to find anything that helps.
Earlier this week I was running Bionix Fusion 1.1 but with all the buzz on the forums about the new 2.2 ROMs I decided to try one. I downloaded Axura 2.0.5 and backed up everything with Titanium Backup and ROM Manager. I then went through ROM Manager to perform the install. This is were I fear I messed something up. I renamed the .zip file from StockKernelAXURA.zip to update.zip (just like when I installed Bionix). Booted into Clockwork (through ROM Manager) and flashed the zip. Everything looked fine during the install, but I'm stuck at the Vibrant load screen.
I found one solution that uses Odin to reflash back to factory, which I did and everything was great... but then I re-flashed and tried Axura 2.0.5 again using the same method. Now I can't boot up (still stuck on the Vibrant load screen) and I can't enter Download mode. I've tried all kinds of button and usb plug-in sequences. Nothing! Please, I know someone out there is thinking "Noob... this is a simple fix!" I'm hoping that person reads this and can lend a helping hand.
Thanks in advance!
This always works for me take out battery plug in usb to phone and computer hold down volume keys while holding the volume keys place the battery back in this should take you to download mode if it doesn't your phone may be hardware locked there are methods of making a device to force download mode but try what I said first then if that doesn't work at least you have an idea of what else to look for
Still flashing , thanks to odin & tw
It worked! Thank you, thank you, thank you! I knew there had to be a way I was missing! I'm flashing back to stock (again) and I'm going to try flashing Axura again... but seeing as the method I used has failed twice so far, any advise? I love how Team Whiskey provided detailed instructions for flashing Bionix Fusion... so shouldn't the same process work for different ROMs? Regardless, now I have another trick up my sleeve.
Thanks again!
Flash it through clockwork in rom manager choose install from sd then go to where it is in your phone click on it that should send you to clockwork recovery then go to install.zip from sd then navigate to whatever folder its in then go to it, it should install you dont have to change the name
Still flashing , thanks to odin & tw
If your unsure about anything I said dont be afraid to ask if I have the answer I'll help you out
Still flashing , thanks to odin & tw
willsnews said:
If your unsure about anything I said dont be afraid to ask if I have the answer I'll help you out
My download is working, the only thing is whenever i try to use odin to install a Rom it freezes in download mode. What can i do to restore it?
Please help
Click to expand...
Click to collapse
coldflid said:
willsnews said:
If your unsure about anything I said dont be afraid to ask if I have the answer I'll help you out
My download is working, the only thing is whenever i try to use odin to install a Rom it freezes in download mode. What can i do to restore it?
Please help
Click to expand...
Click to collapse
I'm assuming you're stuck at cache Just take out your SD card, the large one. I always odin with my sd card out. It gets past that phase where you can get stuck. That will work, and DO NOT rename the {insert rom name here}.zip file to update.zip, just enter clockwork mod recovery and choose install zip from sd card and find it, BUT you NEED to
1. Wipe cache partition
and
2. Wipe DALVIK cache (in advanced menu)
BEFORE installing a rom.
Click to expand...
Click to collapse
So rather than start new thread I thought id continue on this one saying that I have the same problem only no matter what I do I can not force any mode at all. My phone is currently stuck stating that it is converting data partition to optimize for ext 4.
I really dont know what to do at this point.
I tried the following steps
1. Download all the files required in the "BOOT CYCLE" section of this post.
2. Remove everything from your phone (SD card, sim, battery).
3. Plug your phone into your computer WITHOUT the battery, as you have already taken it out in the last step.
4. Press and HOLD vol. up and vol. down.
5. As you are HOLDING these buttons, reattach your battery.
6. You should be in Download Mode.
7. Unplug phone from USB
8. Follow steps 4-8 from the "BOOT CYCLE" section.
with no results. It doesnt even give my phone enough time to show the charging indicator it just automaticlaly boots.
OK i got it to go into download mode. i just plugged in the cord and held down the volume rocker.
no recovery mode
I have the same problem I can't get into Recovery mode I have an HTC G2, I was installing a new kernel, then the recovery Mode stop working, Got stuck in HTC Logo.
Any idea how to fix the problem or what's my problem??? i'd already try some tips but nothing works....
try using the vibrant toolbox to flash the new rom
willsnews said:
This always works for me take out battery plug in usb to phone and computer hold down volume keys while holding the volume keys place the battery back in this should take you to download mode if it doesn't your phone may be hardware locked there are methods of making a device to force download mode but try what I said first then if that doesn't work at least you have an idea of what else to look for
Still flashing , thanks to odin & tw
Click to expand...
Click to collapse
Im having the same problem. I restored an old backup, then rebooted and now I cant get past the Vibrant load screen. No download mode, no recovery, nothing. Any ideas?
Camdizzzle said:
Im having the same problem. I restored an old backup, then rebooted and now I cant get past the Vibrant load screen. No download mode, no recovery, nothing. Any ideas?
Click to expand...
Click to collapse
You most likely made that backup when voodoo was disabled and now when you restored it, voodoo was enabled. Try booting up in recovery[VOL UP + VOL DOWN + POWER then let go of POWER and keep holding VOL UP + VOL DOWN] and installing a voodoo kernel like overstock.
That may be what happened, but dont know anything about the history of the phone. I have tried over and over to get into recovery mode and it wont go past the Vibrant load screen :/
I am also stuck at the vibrant boot screen.
I was trying to update a rom via CWM on my phone, the phone restarted and is now stuck at the vibrant screen.
I have had trouble connecting my vibrant to the computer before. I am not sure that even if i get my phone into dl mode i might not be able to connect to ODIN.
Please help!!
Hi.
Just tryed to inst. Android in my HD2 and now it stuck with a white screen with the HTC logo.
Is it any way to fix this or do i just trach it?
I am not an expert but this happened to me once while installing SD android.
I reinstalled the original ROM from the HTC site and restored my phone to factory settings.
I tried another version of android and it worked well (since last September).
Only observation is that lately (last two month) my phone hangs a lot on both systems (droid & win) and overheats a lot and when this happens I need to wait for it to cool down (at least 20 minutes) then it accepts rebooting (I am stating this although I am not sure is it from the droid or just my HW is faulty for other reasons).
I hope this helps
I tryed a NAND install. Now I cant get conection with usb and computer
Maybe you can perform a hard reset with buttons
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
I hope it works
3mo said:
Maybe you can perform a hard reset with buttons
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
I hope it works
Click to expand...
Click to collapse
didnt work hehe still at the white htc logo screen. I migth installed the files the wrong way round?
Can you get to bootloader (3 coloured screen) by turning on the phone whilst holding vol down?
conantroutman said:
Can you get to bootloader (3 coloured screen) by turning on the phone whilst holding vol down?
Click to expand...
Click to collapse
Yes that's about the only thing i can do
Go-Fast said:
Yes that's about the only thing i can do
Click to expand...
Click to collapse
As long as you can get to bootloader its ok
I would start over from the begining.....
Does it still show that you have HSPL installed on bootloader?
If so, reflash the windows 6.5 ROM that you were using before the android flash.
Then follow the steps in this thread.
Hope that helps....
conantroutman said:
As long as you can get to bootloader its ok
I would start over from the begining.....
Does it still show that you have HSPL installed on bootloader?
If so, reflash the windows 6.5 ROM that you were using before the android flash.
Then follow the steps in this thread.
Hope that helps....
Click to expand...
Click to collapse
Thnx I'll try it later and report back
Still cant get my coputer to connect to the phone.
I get to the "red green and blue" screen, and it says
PB01100 HX-BC
SPL-2.00.HSPL 8G XE
0x85
CotullaHSPL 0x40
I'm on win7 SP1
Ok when you enter bootloader (red green blue screen) you should see "Serial" at the bottom..
When you connect to the computer it should change to "USB"
You might not see anything happen on your computer but the word at the bottom of the bootloader should change.
I might be mistaken here but Im pretty sure you need "2.08 HSPL" although your bootloader shows you have HSPL installed its not 2.08. This might be the cause of your original problem.
Once it says "USB" your ready to flash a ROM via USB as usual...
If it stays on "Serial" after a few minutes then try another USB port or computer if possible.
Enter bootloader and run the HSPL tool and choose 2.08HSPL......
Then start the process from the beggining.
Hope that helps.
conantroutman said:
Ok when you enter bootloader (red green blue screen) you should see "Serial" at the bottom..
When you connect to the computer it should change to "USB"
You might not see anything happen on your computer but the word at the bottom of the bootloader should change.
I might be mistaken here but Im pretty sure you need "2.08 HSPL" although your bootloader shows you have HSPL installed its not 2.08. This might be the cause of your original problem.
Once it says "USB" your ready to flash a ROM via USB as usual...
If it stays on "Serial" after a few minutes then try another USB port or computer if possible.
Enter bootloader and run the HSPL tool and choose 2.08HSPL......
Then start the process from the beggining.
Hope that helps.
Click to expand...
Click to collapse
Hah your a babe conantroutman lol thnx
Is this the rigth SPL ?
Not to intrude on conantroutman here but yes you have to have HSPL 2.08 and a 2.15.50.14 or 2.10.50.02 radio for MAGLDR to work. Without the HSPL 2.08 you can not flash MAGLDR and without the proper radio version MAGLDR will not even boot up.
So to answer your question yes the HSPL you have in the picture you posted is the correct HSPL.
Yep as T said, hspl is good, radio is good. Your all set.
That guide for installing android at the top of the thread is pretty damn good and will have you up and running in no time. Let us know how you get on
Sent From My Fingers To Your Face.....
thnx to both of you. I'll post here when done
Crap my call button dont work when I'm in bootloader
When your in the MAGLDR menu?
You may have to flash WM again to test the call button. Or try reflashing MAGLDR, that may help...
Sent From My Fingers To Your Face.....
I guesse it's a lost case so I just installed winmo and runing android from SD card
thnx for the help.
btw!
is there a way to get htc sense to work on a huawei u8800 or x5?
Hmmm its very weird because if your call button works in WM then it should work in MAGLDR....
Hey i have the t mobile htc hd2, and i had it for quite a while. for the past year i had a windows 6.5 energy rom installed and from the last month a had battery issues. the phone whould be locked and die in 4-5 hours. i thought it was the energy rom and i decided to install magldr so i can install android on my htc phone. i have no idea whats the hspl or radio because i haven't flashed my htc in a long time.... i just installed magldr from the energy rom.... once i did that my htc would get stuck on ad recovery go go go and now i am only able to launch windows 7. when i try to nand android it gets stuck at boot. i want to change my phone back to its original state but i cant get to the tri color screen. i tried vol down then pressing power and i tried turning phone off and hold vol down and pressing the reset button, but my phone doesn't turn on when i press the yellow reset button.
mrflasha said:
Hey i have the t mobile htc hd2, and i had it for quite a while. for the past year i had a windows 6.5 energy rom installed and from the last month a had battery issues. the phone whould be locked and die in 4-5 hours. i thought it was the energy rom and i decided to install magldr so i can install android on my htc phone. i have no idea whats the hspl or radio because i haven't flashed my htc in a long time.... i just installed magldr from the energy rom.... once i did that my htc would get stuck on ad recovery go go go and now i am only able to launch windows 7. when i try to nand android it gets stuck at boot. i want to change my phone back to its original state but i cant get to the tri color screen. i tried vol down then pressing power and i tried turning phone off and hold vol down and pressing the reset button, but my phone doesn't turn on when i press the yellow reset button.[
1.First,download a stock t-mobile rom
2.Hold down volume down key while pressing the power key.
3.Connect cable to the phone and wait for usb to connect.
4.Run your rom and wait for it to finish, done.
Click to expand...
Click to collapse
First boot into magldr menu by pressing and holding the power key and scroll to usb flasher( 5 )
Connect the usb cable and wait for drivers to install,now flash your RUU,that's it. Good luck.
Click to expand...
Click to collapse
Sorry, wrong, thats for flashing android / wp7, it doesnt work for ruu's.
samsamuel said:
Sorry, wrong, thats for flashing android / wp7, it doesnt work for ruu's.
Click to expand...
Click to collapse
Thank you very much for pointing it out to me,really appreciate it boss.