While upgrading to WM 6.5 something goes wrong.
My device did not loaded the new ROM but erased the old one.
If I power on it I see an O2 image.
If I go into bootloader mode (press the two - keys and reset) I see the HP bootloader for about 2-3 minutes (it does not load the new ROM from SD card) and then it display the O2 image.
View attachment 177935
View attachment 177936
to go to the new bootloader try press camera and do styles in reset phone will go to bootloader put the room on sd card and try you
I've tried but nothing happens.
I see only the O2 image and do not read anything from SD
Your card might be no good for flashing, i have 3 mem cards, one only works, the smallest one what is 256mb. My kingston 2 gb doesn't flash.
I used this miniSD to install ARIEY HP68XX ULTIMATE 2009 ROM without problem.
Then I tried an update to ARIEY WM6.5 ULTIMATE FINAL and I pressed the wrong buttons and I found myself in this situation.
peterone said:
While upgrading to WM 6.5 something goes wrong.
My device did not loaded the new ROM but erased the old one.
If I power on it I see an O2 image.
If I go into bootloader mode (press the two - keys and reset) I see the HP bootloader for about 2-3 minutes (it does not load the new ROM from SD card) and then it display the O2 image.
View attachment 177935
View attachment 177936
Click to expand...
Click to collapse
Hi
The memory card should be not more than 1 gb. then it will flash the rom and os image name should be diskimg.nb0
Related
Hi I have done a search on the existing thread but can't find any relevant topic (for aussie).
I have a dopod 838 pro current using Black 3.0.1
IPL 1.04
SPL 2.03
I have decided to flash the ROM back to the official 3 network WM6, so I downloaded the RUU from 3 network website, and run the RUU. It works fine until it booted the phone into bootloader mode, and it just won't continue anymore (no memory card in the slot) The error message is saying it can't detect my phone (well activesync doesn't recognise the phone in bootloader mode anyway).
So I un-packed the RUU, renamed the NBH file to Heraimg and put it to my microSD. however my phone (while in bootloader mode) doesn't detect the microSD card.
can anyone give me a hint here?
cstan11 said:
So I un-packed the RUU, renamed the NBH file to Heraimg and put it to my microSD. however my phone (while in bootloader mode) doesn't detect the microSD card.
Click to expand...
Click to collapse
Did you typo this? it's supposed to be hermimg.nbh
cstan11 said:
I un-packed the RUU, renamed the NBH file to Heraimg and put it to my microSD. however my phone (while in bootloader mode) doesn't detect the microSD card.
Click to expand...
Click to collapse
1. Make sure you've got a good charge in your battery as it will take a while! Make sure the card is Fat32 formatted.
2. Rename the file on the SD card HERMIMG.nbh (your typo or lack of extension may have caused a failure as the bootloader looks for the exact filename)
3. Put the card in and then hold down the OK button (left side) and the power button (right side) and press reset with your stylus.
4. After a couple of seconds - you should get a screen with instructions on it (and list of what's to be updated) - Follow the instructions and all should work.
Hope this helps - good luck!
Edit :: CRCinAU beat me to it ;-)
Sd Card With Spl 2.03
Mikeapollo said:
1. Make sure you've got a good charge in your battery as it will take a while! Make sure the card is Fat32 formatted.
2. Rename the file on the SD card HERMIMG.nbh (your typo or lack of extension may have caused a failure as the bootloader looks for the exact filename)
3. Put the card in and then hold down the OK button (left side) and the power button (right side) and press reset with your stylus.
4. After a couple of seconds - you should get a screen with instructions on it (and list of what's to be updated) - Follow the instructions and all should work.
Hope this helps - good luck!
Edit :: CRCinAU beat me to it ;-)
Click to expand...
Click to collapse
THIS WILL NOT WORK WHEN CID DEMAGED WITH SPL 2.03!! ONLY WHEN YOU HAVE UNLOCKED CID PUT IN MTTY CONSOLE AND RUN : TASK 32 IF YOU SEE LEVEL=0 THIS IS GOOD IF YOU SEE LEVEL=FFF SD CARD WILL NOT WORK.
2. you can try first this http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
if you received message image corrupted sent to imei-check to fix.&70pounds...then good lack..
sorry for the late reply. haven't had the time to do this till now. I followed mbsshop1302gsm's instructions and it works.
thanks alot ppl!
How to flash gene via memory card?
if possible give the instructions please
it is very easy so no one answer ?
OR it is impossible so no one answer ?
sd card flashing
polifon said:
How to flash gene via memory card?
if possible give the instructions please
Click to expand...
Click to collapse
hi, you must place the rom on the sd card and then softrest while holding down the camera button. this will make the phone enter the bootloader and look for a rom on the sd card. i think that roms have to be specially cooked to be flashef in this way
zinzar said:
it is very easy so no one answer ?
OR it is impossible so no one answer ?
Click to expand...
Click to collapse
yes it is too easy with a search in this forum so no one bother to reply...i think....
Format SD-Card as FAT32.
rename RUU_Siged.nbh to GENEIMG.nbh, Put GENEIMG.nbh on SD-CARD (root).
Charge your device at 100%!
Insert SD-Card in Gene, press AND HOLD "Camera" button, and do soft-reset.
If you see white screen with "Reading SD content":
Release "Camera" button, wait, and when countdown (start from 10s) in left-bottom corner of screen is appear, press "Power" button. Flashing is begin, and approx. 8 minutes long. After you will see "Success. Press any key". Do soft-reset. Congratulation.
PS: not all the rom can be flash via SD card, if you failed, do it the normal way with USB RUU
rexypow said:
yes it is too easy with a search in this forum so no one bother to reply...i think....
Format SD-Card as FAT32.
rename RUU_Siged.nbh to GENEIMG.nbh, Put GENEIMG.nbh on SD-CARD (root).
Charge your device at 100%...........................
PS: not all the rom can be flash via SD card, if you failed, do it the normal way with USB RUU
Click to expand...
Click to collapse
One thing more
In normal way by flashing using PC i make this before
1.Olipro's SPL for Old Gene
2. i have now white screen so i can flash the rom otherwise the device will breakdown if i did not jump the spl
SO by sd card there is no need to jump spl or what , explain please
greate very usefull info thanks
@Zinzar: I have never used JumpSPL trick, right from the time i flashed my first ROM, i flashed the HardSPL and as mine is a New Gene the Olipro method bricked it and then i unbricked it using Orefkov's method. HardSPL is permanently applied and is never needed to apply again. After that you can flash your phone in both way, RUU and SD Card. NO special thing is needed to do. just format the sd card with Fat32, 4096 kb cluster size (the default one), put the RUU_Signed.nbh on sd card and rename it to GENEIMG.nbh, reboot the phone in bootloader mode and it will read the rom file from sd card. After that just follow the onscreen instructions.
I hope i have answered your query coz i dont really got your question.
active sync not working after rom upgrade from sd card
hi all,
i have recently upgrade rom ver 6.5 21501 using sd card method.
now my gene could not connet with my pc for active sync.
i want to use other rom like 19971wwe_fusion9.nbh by lomlom. i like it very much.
when i soft-reset with camera button pressed, there is a try colour screen but don't show there below "usb", when i connect my phone to pc using cable.
please provide me the solution...
thanks to all....
during update from SD card...... it says reading second OS from SD, and then says "SD FAT update failed !!!"....... also is there a deriver for the 64-bit version of the USB method???
How to flash rom on gene from the sd card
hi
pls see below details for the same
.HOW TO FLASH ROM ON GENE FROM THE SD CARD
1. Rename the .nbh file of your rom of choice to GENEIMG.nbh, drop into the root of your SD card.
2.Poweroff your phone
3.hold the volume down key and while continuing to hold it power on ur phone
4. The Phone will go into the bootloader mode, and will auto detect the rom image from the SD Card and ask if you want to proceed by hitting the power button. Hit the power button and the rom will install
Note : it should take about 10-15 mins (as of now i have not tried this try at ur own risk )
also make sure that ur SD card is Fat32 or format the same to Fat32 & use a smaller memory card the smaller the better
this is as per my experience using the above method on my previous phone ie gene(P3400i)
correct me if im wrong
thanks
hari
i exactly did that..... i'm using a 2GB micro SD with an adapter.... it detects, starts, but at the reading second OS stage it fails with the error...........
Also RUU fails for 64bit system (Using Win7 HP x64).... did it on a friends 32bit....
shantanuthatte said:
i exactly did that..... i'm using a 2GB micro SD with an adapter.... it detects, starts, but at the reading second OS stage it fails with the error...........
Also RUU fails for 64bit system (Using Win7 HP x64).... did it on a friends 32bit....
Click to expand...
Click to collapse
rename the ruu_signed.nbh to GENEIMG.nbh and the flash a custom rom via storage card.
rom upgrading works very fine on win7 64bit.you Just need to use the right drivers for the same.
karan999 said:
rename the ruu_signed.nbh to GENEIMG.nbh and the flash a custom rom via storage card.
rom upgrading works very fine on win7 64bit.you Just need to use the right drivers for the same.
Click to expand...
Click to collapse
yes i did rename the file, then formated using fat32, 4096 allocation size.... copy the renamed file, inserted in phone, reset + camera button.... then power befor 10secs........ the process saarts but as i said... fails when it tries to read second OS......... the driver specifies for win7, vista in the guide works only for 32bit systems....
shantanuthatte said:
yes i did rename the file, then formated using fat32, 4096 allocation size.... copy the renamed file, inserted in phone, reset + camera button.... then power befor 10secs........ the process saarts but as i said... fails when it tries to read second OS......... the driver specifies for win7, vista in the guide works only for 32bit systems....
Click to expand...
Click to collapse
hi
make sure u put the rom on the root of ur SD not inside any folder OK
thanks
hari
yes there is only one file.... GENEIMG.nbh, no folder, no other file..... I tried with three ROMs, two customs by others, third one my own but a stock 21911 ie without changing anything all fail at same stage.... I has earlier (long before) HardSLP'ed mine to Oref.........
Basically, here is m problem:
I have a hermes. The GSM wasent working. I though maybe an upgrade to WM6 could correct some software bugs.... Wrong!
I realized it actually briecked (type 1a). Trying to follow the instruction to fix it, but i am not able to send ANYTHING to it!. Either by SD or Custom RUU. Finally i am standing with a Hermes, WM6, and it will NOT accept any flashes i try to put in it!
Its on HardSPL (2.10) IPL 1.04
Thanks in advance
Stephen_D
EDIT: Forgot to say what happens when i try to flash it!
With an SD card all I get it "Loading..." then returns to the bars
By USB it starts updating And freezes on 0%, then the software pops an error after 5 mins like what it can communicate.
Thanks
sort of the same problem...
I've been trying to flash a ROM for the past hour now and my phone doesn't get flashed.
(I already have HardSPL and I'm using a 1gig micro sd)
What I did:
Format the sd card to FAT32
copied the RUU_signed.nbh to sd card then renamed it to HERMING.nbh
I place the sd card on the phone that's connected to a charger
I press Power Button and Ok button on the left side then push reset
What happens:
It goes to bootloader mode (tricolor screen)
then it says loading...(2 seconds)
then goes back to the tricolor screen again
I waited for the prompt that I need to push the Power Button but it never came, so I soft reset it and tried it again but the same all over again.
The ROM I was trying to flash is the AT&T stripped ROM, I read it here that it's better to flash a stock ROM first before flashing/upgrading to a cooked ROM.
By the way I just found out that my X01HT isn't a Softbank, it's a DoCoMo.
Is my phone upgradeable?
Can someone please tell me what I missed?....I really want to upgrade my phone without bricking it.
Thanks!
Stephen_D said:
With an SD card all I get it "Loading..." then returns to the bars
Click to expand...
Click to collapse
What format is your SD card? Fat or Fat32?
Its gota be Fat32 to flash from it.
it's all good now....
I've given up flashing my phone from the sd card so I decided to flash it with my laptop instead. Luckily it worked without a hitch.
I'm so loving my phone now, been playing with it for 2 hours and the usual hang ups I got before are non-existing anymore.
To use the sd card method you need to check that the .nbh file is hermimg.nbh, NOT herming.nbh as you had written on your previous post.
The holy trinity of sd card flashing, Formated FAT32, Named hermimg.nbh & sd card is 2Gb or less...
Cheers...
I see.....
ok hermimg.nbh
will try this again, maybe next week since I'm enjoying my new ROM right now.
Thanks ultramag69!
hi,all,the money slot of my atom life is BAD,and the rom is Atom Life WM6 ROM Upgrade (ENG) WWE_RC2140907B2 from http://www.myxda.com
now i want update wm6.1(wm6.5 is ok too),then how can i do?what download the file?
thx all.
Smile [28Sep] Atom Life Wm6.5 COM2-21859 COM3-23053 COM4-23414 + How To Build the k
nikoused said:
hi,all,the money slot of my atom life is BAD,and the rom is Atom Life WM6 ROM Upgrade (ENG) WWE_RC2140907B2 from http://www.myxda.com
now i want update wm6.1(wm6.5 is ok too),then how can i do?what download the file?
thx all.
Click to expand...
Click to collapse
You can start here
http://forum.xda-developers.com/showthread.php?t=551760
juliuscezar said:
You can start here
http://forum.xda-developers.com/showthread.php?t=551760
Click to expand...
Click to collapse
i download files from http://forum.xda-developers.com/showpost.php?p=4392044&postcount=1
and the file name is AL1.dio
i think al1.dio file must
"
3. Copy AL1.DIO to card. (See to it that there are no other files in the card)
4. Insert card to memory slot of your device. Press and hold record button (beside the camera button) and reset button ?
"
i am wrong?
HOW TO FLASH THE ROM:
1. You must have at least 70% battery.
2. Use mini-SD card and format it to FAT16 (only use 2GB capacity and below, don't use SDHC card for it will not be recognized)
3. Copy AL1.DIO to card. (See to it that there are no other files in the card)
4. Insert card to memory slot of your device. Press and hold record button (beside the camera button) and reset button simultaneously. Wait until BOOTLOADER mode appears saying "SD CARD DETECTED", release the buttons.
5. Wait till it finishes until the O2 logo and splash screen appear. Follow the on screen steps. HAPPY FLASHING!!!
http://forum.xda-developers.com/showpost.php?p=4358549&postcount=1
firestonez said:
HOW TO FLASH THE ROM:
1. You must have at least 70% battery.
2. Use mini-SD card and format it to FAT16 (only use 2GB capacity and below, don't use SDHC card for it will not be recognized)
3. Copy AL1.DIO to card. (See to it that there are no other files in the card)
4. Insert card to memory slot of your device. Press and hold record button (beside the camera button) and reset button simultaneously. Wait until BOOTLOADER mode appears saying "SD CARD DETECTED", release the buttons.
5. Wait till it finishes until the O2 logo and splash screen appear. Follow the on screen steps. HAPPY FLASHING!!!
Click to expand...
Click to collapse
yeah,i talk aout how to flash the rom,
and i think i khnow how to fash the rom with the GOOD mini sd slot
but my slot is NOT work well
anyway ,thanks
Maybe you should change your SD card to test it...
AFAIK Not on every SD Card supported to flash via SD Slot...so try it first with different SD brand...
cmiiw
Chaly said:
Maybe you should change your SD card to test it...
AFAIK Not on every SD Card supported to flash via SD Slot...so try it first with different SD brand...
cmiiw
Click to expand...
Click to collapse
i have used 4 sd card what all work well on my friend's phones
MY O2 Atom Life's rom is Atom Life WM6 ROM Upgrade (CHT) WWE_RC2140907B2 from seeo2.com,
it is ok, no problem
I need a profeesional who could help me what to do?
First I tried to instal a new rom through using MiniSD memory card, so i got the files from a very reputable website whish is this one. the name of rom WM 6.5 21500. I entred into the bootloader, it successfully dedected the MIni SD. but the screen stoped i was not able to make a choice through the menu.
So i removed the battery then the phone doesn't want to open.
Plz can any one help me, by just telling me what to do.
islamaburahmah said:
I need a profeesional who could help me what to do?
First I tried to instal a new rom through using MiniSD memory card, so i got the files from a very reputable website whish is this one. the name of rom WM 6.5 21500. I entred into the bootloader, it successfully dedected the MIni SD. but the screen stoped i was not able to make a choice through the menu.
So i removed the battery then the phone doesn't want to open.
Plz can any one help me, by just telling me what to do.
Click to expand...
Click to collapse
Repeat the process, but instead instal one of these great ROM's from here to your device.
Obelixossauro said:
Repeat the process, but instead instal one of these great ROM's from here to your device.
Click to expand...
Click to collapse
as i have told you that he does not want to open, i tries several times to enter into the boot loader using a key combination of holding record+volume+restart. the results are the same======> blank screen
How to Install new ROM - Atom Life
Buddy,
Below is the guide...hope this helps.
http://forum.xda-developers.com/showthread.php?t=535064
is ur WM6.5 21500 file is AL1.DIO or something else?
what is ur SDcard size? is it larger than 2G?
is ur SD card properly formatted to FAT partition?
please provide some infos....
oza_crazy said:
is ur WM6.5 21500 file is AL1.DIO or something else?
what is ur SDcard size? is it larger than 2G?
is ur SD card properly formatted to FAT partition?
please provide some infos....
Click to expand...
Click to collapse
my WM6.5 is 23089... is use 2GB card (Kingston) and formatted....try changing to a branded miniSD card.
juliuscezar said:
my WM6.5 is 23089... is use 2GB card (Kingston) and formatted....try changing to a branded miniSD card.
Click to expand...
Click to collapse
well... i know...
thanks for sharing. but i'm asking those question to Islamaburahmah.
in fact.. i always use V-Gen 512Mb for upgrading.
never fail.
even a "half dead" ATOM/ATOM EXEC have been fully recovered by my Luvly V-gen 512Mb. no need for JTAG unless a real Brick which can't entering bootloader at all. (did a little trick on ATOM wiki plus some improvisation to push the device entering bootloader)
hehehe....
yesterday i have revived a "stuck in DSUU Mode" Atom Life due to a Failed upgrade process from PC. (the PC is restarting itself when My Friends Running the official WM6 .EXE ROM Updater (get it from www.seeo2.com)