My phone is cingular 3125, I have flash rom many times. but this time when i flash pampooh's 1.05b rom, it was bricked. when i flash fullrom, it said that ERROR [294] : INVALID VENDER ID. (picture 1
when i flash pampooh's rom again, it said the image file is corrupted(picture 2). i have tried so many ways to solve it, but fails.who can help me?
I think you must return to official rom ... and then, go to other rom.
ceramic said:
I think you must return to official rom ... and then, go to other rom.
Click to expand...
Click to collapse
how？ I trIED to BUT FAILED....
did you flash with the official cingular rom or some other operator's rom?
lalala, that's why SuperCID is REQUIRED...
Erofich said:
lalala, that's why SuperCID is REQUIRED...
Click to expand...
Click to collapse
master Erofich，can you help me？ i amost flashed all the official rom in our forum. but when the process is in 4 percent， it says
ERROR [294] : INVALID VENDER ID.
i totally have no way to repair it by myself.
set 32
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
g_cKeyCardSecurityLevel = FF
Related
Please, I need this urgently. My XDA2 is stuckin bootloader mode and all attempts to flash it with any updates gives me Error 100 - Device ID . I need to try flash it by SD card with existing functional ROM and see wha happenes. Please!
this old topic, describes how to grab ROM file from working XDA2
http://forum.xda-developers.com/vie...tdays=0&postorder=asc&highlight=ntrw&start=25
Put it on my FTP please, ID64.serveftp.com akira/akira
TIA
I follow al steps indicated to reconstruct the OS part (Part02.raw) pf a the spanish dumped rom that is in FTP using imgfs tools and rombaker utility and the reconstructed nbh file doesn´t flash with the modified flash utility. I get errors [260] "update error" and [244] Invalid Model ID. Before try to flash I have supercid my device (HERM 300) and applied hardSPL. What can be wrong in the process?
dcoelho said:
I follow al steps indicated to reconstruct the OS part (Part02.raw) pf a the spanish dumped rom that is in FTP using imgfs tools and rombaker utility and the reconstructed nbh file doesn´t flash with the modified flash utility. I get errors [260] "update error" and [244] Invalid Model ID. Before try to flash I have supercid my device (HERM 300) and applied hardSPL. What can be wrong in the process?
Click to expand...
Click to collapse
if you're getting invalid model ID then you've definitely overwritten Hard-SPL
With wich SPL must I work to get connection for flashing?
In this HERM I have SPL 1.30 Olipro (btw thanks for your great work)
A wrong D600 rom is flashed into my D600, and now it stop at the first splash image and never go further.
I've tryed these below but none helps.
1. Reformat ROM by hold the left & right button then reset.
2. Enter bootloader and flash any rom that I've flashed before, but they all aborted at 2% and then reboot.
3. Dump a os.nb & a extrom.nb from a never flashed D600, and generate a nbh and flash, the result is the same as 2.
The SPL version of my D600 is 1.03.000, and I use the jumpspl to flash a rom before, but now I can not enter the system in the phone and can not run jumpspl anymore.
I thought the key point is that some number or value in these roms are not correct. I've tried both GENE10000 as Model ID, 11111111 as Country ID, 1.00.000.0 as Version, WWE as Language and GENE10000 as Model ID, SuperCID as Country ID, 1.00.000.0 as Version, CHS as Language.
I found an article (http://www.aray.cn/archives/1687 in Chinese) that said there is a list to modify the nbh by model and spl version, but I cannot find the list.
Any help is greatly appreciated!
D600
plz, download any version of ROM as WWE, then connect your device with computer, enter BOOT LOADER, then just click the RUU.exe files, your device will formatted, think it will help you..
Download Link:-
http://forum.xda-developers.com/showthread.php?t=381048
thank you for your help
I've tried that, but it didn't solve the problem. RUU got an error code 270 at progress 2% and my phone then reboot.
I forgot to write that RUU report error code 270 when flashing any rom at progress 2%.
I also tried to flash via sd card
but an error message "invalid certificate" got when checking sd contents
how to flash using SD card
xeroo said:
I also tried to flash via sd card
but an error message "invalid certificate" got when checking sd contents
Click to expand...
Click to collapse
Could you please explain how to flash by sd card
Well, just put the rom in your sd card with the name GENEIMG.nbh at the top level
Reboot into the bootloader, it will start automaticlly
Your sd card must be fat32 fs type.
xeroo said:
Well, just put the rom in your sd card with the name GENEIMG.nbh at the top level
Reboot into the bootloader, it will start automaticlly
Your sd card must be fat32 fs type.
Click to expand...
Click to collapse
Thank you for sharing , but my phone didn't responded to it.
Anyway did you try to gene_cert_fix to fix certificate issue of rom before flashing
It is said that not all gene phone will act, but most do.
I havn't tried the gene_cert_fix.
I found one via google and I'll try it later.
Thank you a lot!!!!
xeroo said:
A wrong D600 rom is flashed into my D600, and now it stop at the first splash image and never go further.
I've tryed these below but none helps.
1. Reformat ROM by hold the left & right button then reset.
2. Enter bootloader and flash any rom that I've flashed before, but they all aborted at 2% and then reboot.
3. Dump a os.nb & a extrom.nb from a never flashed D600, and generate a nbh and flash, the result is the same as 2.
The SPL version of my D600 is 1.03.000, and I use the jumpspl to flash a rom before, but now I can not enter the system in the phone and can not run jumpspl anymore.
I thought the key point is that some number or value in these roms are not correct. I've tried both GENE10000 as Model ID, 11111111 as Country ID, 1.00.000.0 as Version, WWE as Language and GENE10000 as Model ID, SuperCID as Country ID, 1.00.000.0 as Version, CHS as Language.
I found an article (http://www.aray.cn/archives/1687 in Chinese) that said there is a list to modify the nbh by model and spl version, but I cannot find the list.
Any help is greatly appreciated!
Click to expand...
Click to collapse
那个是骗人的，换字库吧呵呵。
Xeroo, is your provlem being solved?
Hi, got problem and need your HELP!
EDITED:
I was trying to set my raph to stock, cuz warranty.
But, after flashing stock SPL, it goes to bootloader write :
" Upgrade rom code error, please try again"
What was happend:
1)I forgot to flash back stock Radio, so... my Raphael now stay in bootloader. And write "Upgrade ROM code error, please try again".
2)I was tried to flash stoc SPL via SD card. maybe it is problem.
What was I try:
I tried to flash HardSPL, but it stuck on 0%
I tried to flash stock Radio, but it stuck on 0%
I tried to flash stock ROM , but it stuck on 0%
I tried to flash non-stoc ROM, and it writes "Invalid vendor ID" or somethink like that, its cuz I have stock SPL, right?
What next?
SOLVED
!! If you will try this way it is on your own risk !!
Here is how to solve this issue:
1) Download MTTY 1.42
2) Download ActiveSync Drivers
3) Download STOCK ROM for your phone(best is from you provider or seller web site)
4) Install drives and disable USB connection in ActiveSync and reboot your computer
5) Set your phone to bootloader and connect via USB
6) Open MTTY set connection to USB
7) Send command "set 16 0" in mtty (without the quotes)
8) Reboot your phone and set it again to bootloader
9) Allow USB connection in ActiveSync and run RUU with stock Rom and Radio
10) If flash is done, make hard-reset
11) You are done!
!!This comes with no gaurentee!!
I cant find way out of this issue
Maybe mtty can help, but I dont know what was write as commands.
A few members have run into that issue before.
Before MTTY, I recommend posting in the HardSPL thread to see if such a member can share some insights.
Cheers,
thx, hope they help me.
EDITED ! new facts !
MiTMaNeK said:
Hi, got problem and need your HELP!
EDITED:
I was trying to set my raph to stock, cuz warranty.
But, after flashing stock SPL, it goes to bootloader write :
" Upgrade rom code error, please try again"
What was happend:
1)I forgot to flash back stock Radio, so... my Raphael now stay in bootloader. And write "Upgrade ROM code error, please try again".
2)I was tried to flash stoc SPL via SD card. maybe it is problem.
What was I try:
I tried to flash HardSPL, but it stuck on 0%
I tried to flash stock Radio, but it stuck on 0%
Click to expand...
Click to collapse
As far as I know, HardSPL and the stock SPL cannot be flashed via SD card. You must use the .exe file that you download with HardSPL. I believe that the first post of the HardSPL thread says something to that effect. Flashing the stock SPL should always be done LAST, so flash your stock ROM and Radio (if the ROM does not include the Radio). If your phone is stuck in bootloader, you should still be able to flash your device. See this thread for more information about flashing back to stock SPL.
htcfan78 said:
As far as I know, HardSPL and the stock SPL cannot be flashed via SD card. You must use the .exe file that you download with HardSPL. I believe that the first post of the HardSPL thread says something to that effect. Flashing the stock SPL should always be done LAST, so flash your stock ROM and Radio (if the ROM does not include the Radio). If your phone is stuck in bootloader, you should still be able to flash your device. See this thread for more information about flashing back to stock SPL.
Click to expand...
Click to collapse
Yea, I know it now too HardSPL and stock SPL only via cable.
Yea, Im able to flash, but it every time stuck on 0%
And if i try to flash ROM what isnt for my Rahp it write "invalid vendor id", its because I got stock SPL and I cant find way how to flash HardSPL - normal way isnt working for me.
I dont know if what i have in mind will fix it - or possibly make it worse! so i wont post it here (in case someone else mistakes it for propper advice!) but check your PM - and remember it comes with no gaurentee!
SOLVED !
BIG THX TO Beeble !
Thx for the tip that info was very important for me...
Hi i am trying to flash custom ROM with twrp, i got weird error:
Error applaying update: 28 (ErrorCode:: kDownloadOperationExecutionError)
Click to expand...
Click to collapse
and
Updater process ended with ERROR: 1
Click to expand...
Click to collapse
I was trying another version of twrp
I was trying another customs ROM
Now i dont have any system on A or B slot
I have Nokia 7.1
Sorry if i post this in wrong place, this is my first post
you need raghu varma's partitioning tool because as he said it, his new roms won't work on the phone's partition and system capacities as they are.
increase the capacity according to his guide and this error won't come up ever again.