The other day I flashed a kitchen to my phone. The flashing process went smoothly and after the DL the phone restarted and then froze on the startup screen. I reflashed another rom and it worked fine. When I tried to flash another Kitchen, the phone froze again at startup. Is anyone familer with this issue or can help me figure out what is wrong?
Weapondrift said:
The other day I flashed a kitchen to my phone. The flashing process went smoothly and after the DL the phone restarted and then froze on the startup screen. I reflashed another rom and it worked fine. When I tried to flash another Kitchen, the phone froze again at startup. Is anyone familer with this issue or can help me figure out what is wrong?
Click to expand...
Click to collapse
well a kitchen is what is used to cook a rom so you shouldn't try to flash a kitchen to your phone. You use the kitchen on your pc to make a rom and then flash the .nbh file to your phone
thanks. It was misleading since after I chose the programs the RUU started up asking me to connect my phone.
and of cause only flash roms made for your device
one can't use roms made for other devices
it can kill the device if one try
Weapondrift said:
thanks. It was misleading since after I chose the programs the RUU started up asking me to connect my phone.
Click to expand...
Click to collapse
What carrier do you use? If you have verizon, Scott Crosler released a bulletproof rom. It can also be used on Sprint phones, but you'll need to add an MMS cab if you plan on texting.
Here is a link to the ROM: Click Here
There is also a link to his forums on that page where you'll find all the help you need.
Related
So I did the HardSPL when I redid the phone a couple of months ago and lately it hasn't been getting service and just stopped altogether. So I looked to see what radio version I had and it said none.
So I proceeded to update the radio but I did not do the HARDSPL again as I already did it before. Well as I went through the whole process it said there was an error and told me to remove the batter. I did all this and now it won't boot up its just at the ROM screen or whatever with the three different colors.
How do I get it to boot up so I can get it to activesync and reimage it? I'm stuck and it just won't boot so I don't know what to do. Thanks
Oh and I've tried all the steps in getting by the bootloader by disabling usb and all that and it still doesn't work
I had the exact same problem yesterday ... connect it to your USB cable, and flash it with a STANDARD ROM, ie one downloaded from your phone's provider's site.
ie. We get our TyTNs through a local HTC distributor called Leaf Wireless. I downloaded the AKU3 rom from their site, and ran it. Reflashed my TyTN to their original AKU3 ROM, and after that I could reflash with whatever I wanted to
How do I reflash if I can't get it to activsync with mycomputer or don't you need to with a standard rom flash?
So I tried to do it with an original ROM and it gets to 12% done and fails everytime. How do I get this to boot back up normally?
If you go to the wiki it tells you how to do a rom upgrade off an SD card. I would try that route and re flash a ROM and radio that you know works, then take it from there.
Is all in the wiki.
Good luck.
WB
Can you post a link to that wiki? I couldn't find the one you were referring to. Thanks
I have had the same issue and even though I still have gotten it to somewhat work I'm almost sure something is wrong and I will have to send it in for a warranty repair. Here are the steps I followed using the official 8525 rom download. http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
After that Windows worked fine but still no radio (no gsm error). I downloaded the new radio only file off of the forums which didn't seem to work. I took my phone into the att wireless store and the lady reset my sim, somehow the radio started showing up and working.
I literally spent all day on this yesterday and it is hell. If you have any questions let me know I can guide you through it.
Check your pm's
JaredYng said:
Can you post a link to that wiki? I couldn't find the one you were referring to. Thanks
Click to expand...
Click to collapse
Not sure how you couldn't find it. Anyway here you go>> http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
I was putting my Titan back down to stock so I could enable GPS (I had it working, but it stopped when I activated my Centro to get data back). Anyways, I forgot to unplug and plug back in the USB. Now no matter what I do It's telling me that the ROM Update utility has encountered communication errors with the device. I should also probably mention that I can still get to the boot loader itself. Any ideas?
Flash via sd card method.
drewcam888 said:
Flash via sd card method.
Click to expand...
Click to collapse
How do I do that if I can't get to Windows Mobile to run the nueSPL executable?
Maybe you should have done some reading before you got into this flashing.
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
I actually did quite a bit of reading before flashing. My problem is that I didn't disconnect the USB cable like I should have when flashing back to the original boot loader. It stopped and now I'm stuck. I tried putting the bootloader the relocker tried to install on the SD card and named it TITAIMG, but it gets stuck at the gray screen saying "loading...". I tried the exitbl but it tells me that it can't find any sessions. I tried running the program again, but I wind up with communication errors. That's why I'm asking for help now, I've tried everything I've found to try...
MrPenguin_2 said:
I actually did quite a bit of reading before flashing. My problem is that I didn't disconnect the USB cable like I should have when flashing back to the original boot loader. It stopped and now I'm stuck. I tried putting the bootloader the relocker tried to install on the SD card and named it TITAIMG, but it gets stuck at the gray screen saying "loading...". I tried the exitbl but it tells me that it can't find any sessions. I tried running the program again, but I wind up with communication errors. That's why I'm asking for help now, I've tried everything I've found to try...
Click to expand...
Click to collapse
What carrier do you have? Did you run the "GetBackToStockXV6800"?
What radio, Bootloader are you running?
"I tried putting the bootloader the relocker tried to install" (PLEASE CLAIRIFY).
I think it may be working now. I went back to what drew said about using the SD and I tried the one file I hadn't tried. I had tried all of the .nbh files in the directory (stock radio and bootloader), but not the stock ROM itself. I had assumed that since the program quit halfway through flashing the bootloader hadn't installed properly. It would appear I was wrong. So, thanks for the help, Drew, and thanks for being so willing to help cac2us.
MrPenguin_2 said:
I think it may be working now. I went back to what drew said about using the SD and I tried the one file I hadn't tried. I had tried all of the .nbh files in the directory (stock radio and bootloader), but not the stock ROM itself. I had assumed that since the program quit halfway through flashing the bootloader hadn't installed properly. It would appear I was wrong. So, thanks for the help, Drew, and thanks for being so willing to help cac2us.
Click to expand...
Click to collapse
Your welcome,
Have you decided to go with a custom ROM, or are you ready to try PPC Kitchen (BuildOS)?
Keep in mind, if you flash a custom ROM with programs that you later want to update with newer versions, you may not be able to uninstall the original versions.
I'm thinking I'll try PPC kitchen. My biggest problem now is deciding how badly I want windows mobile 6.5. I love the touch friendly GUI and the desktop version of IE, but I'm not able to run TVU or Pandora because they use more memory than I have available.
MrPenguin_2 said:
I'm thinking I'll try PPC kitchen. My biggest problem now is deciding how badly I want windows mobile 6.5. I love the touch friendly GUI and the desktop version of IE, but I'm not able to run TVU or Pandora because they use more memory than I have available.
Click to expand...
Click to collapse
I found that "ZOOM BROWSER" is quite a hog. And "Titanium" eats more than "SPB Mobile Shell 3".
And with "NueKernel", 6+mb. from the camera is just a soft reset away.
But I mainly load apps that I can't find a cab file for, so when an update comes out, I can just update without re-coocking the ROM.
Enjoy.
i have hspl 3 installed and have installed custom roms befor on this phone.
my problem now is that when i try to flash new rom it gets stuck on 0%, i have tried from the sd card and using RUU Custom installer with no luck .
also i have done a hard reset, also have tried to install HSPL3 again even that gets stuck at 0%.
Has anyone come across this before and is there a fix.
You said "i have tried from the sd card and using RUU Custom installer with no luck".
Why do you use RUU installer when flashing using a SD card?
All you need is a SD card with ROM in it, and start the flashing from the phone.
10pinto said:
Has anyone come across this before and is there a fix.
Click to expand...
Click to collapse
If you get really stuck just re-flash the rom that the phone came with - i.e. the official one from your mobile operator - and you should be fine. You can find them on the net if you don't have it (e.g. on the HTC web site).
You can then start putting custom roms back on it.
Good luck!
otherworld said:
If you get really stuck just re-flash the rom that the phone came with - i.e. the official one from your mobile operator - and you should be fine. You can find them on the net if you don't have it (e.g. on the HTC web site).
You can then start putting custom roms back on it.
Good luck!
Click to expand...
Click to collapse
yep tried that to, and it does not work.
it seem that my phone will not accept any roms just sits on 0%
i have tried the offical rom , custom roms via the sd card nothing works even tried to reflash hspl3.
Interesting, I'm having the same issue.
Grr.
Me too. I have rom 5.11.502.2 WWE, and I cannot get the RUU OR the Hard Rom flash to work.
This phone is a replacement for my Fuze that was stolen.
This newish phone is a WinMo 6.1 and I want to change the rom to 6.5-23568 Fuze Touch Pro.
WTF is making this stick at 0%?
cutenoob said:
Me too. I have rom 5.11.502.2 WWE, and I cannot get the RUU OR the Hard Rom flash to work.
This phone is a replacement for my Fuze that was stolen.
This newish phone is a WinMo 6.1 and I want to change the rom to 6.5-23568 Fuze Touch Pro.
WTF is making this stick at 0%?
Click to expand...
Click to collapse
if the version numbers you mentioned are correct, then you do not have a hd2.
Some background on my phone first. I thought that I bricked it a few weeks ago when I flashed a kernel for it that went to a fascinate. I thought that the showcase was and is a twin to it. But my phone would not boot up. Did some more research and ended up flashing CWM 3.0 and then PnP 3.0 and eb11 build and had a phone again. Well had no problems till yesterday when my phone just did a reboot by itself and then I had no service and under about phone several of the categories said unknown. I took it to cellsouth and left with a phone that would not even boot up! All I can do is boot in CWM but if I try flashing a anything it says either error with restoring boot image or something about updating sript and binary files. Can somebody help me out?
Check out this thread, second post after original op, it has files and process to odin the Showcase. This is most likely your best option. GO HERE
just found a link with the showcase stock file..im downloading now and will let you know if it works. had the same problem as you. now im using fascinate bases and cant get my 3g
Well I got it to where I can at least talk on it!... I flashed it back to a stock DL09 with odin. Which it now looks and acts just like a Verizon phone. So I can talk and text but has NO data of any kind unless I connect to wifi. I think that I need to flash a DJ20 or EB11 radio to it but not sure, Maybe somebody could lend there knowledge again. Thanks so far.
i was just like you...had to use that verizon rom. however i did find a c.south stock rom and got to normal.YES!! but still working on getting 3g back up. i think it messed up when i flashed another modem or somthing. i'll post link in a sec.
rooferman said:
Well I got it to where I can at least talk on it!... I flashed it back to a stock DL09 with odin. Which it now looks and acts just like a Verizon phone. So I can talk and text but has NO data of any kind unless I connect to wifi. I think that I need to flash a DJ20 or EB11 radio to it but not sure, Maybe somebody could lend there knowledge again. Thanks so far.
Click to expand...
Click to collapse
here is the link. first post has instruction and downloadhttp://forum.xda-developers.com/archive/index.php/t-1121576.html
PLEASE.
I have found lots of threads on this topic and nothing is working for me.
-I unlocked bootloader.
-Flashed Android revolution ROM
>WiFi stopped working..A device doesn't even show up to try and select just a blank menu (should be several routers showing)
-I have since tried using CyogenMod menu to do factory wipe/cache wipe then installed a new rom
- I have tried installing JmzStockATTOneDeodex, and RageOneV.1.1.0 after doing factory wipe/cache wipe
- I then found "RUU_Puccini_LTE_Rogers_WWE_1.26.631.4_Radio_1.05.550I.09v2_30.68.550I.12_release_219377_signed"
but this file doesnt seem to open at all it is a exe... and now .......I now am starting to lose my mind
PLEASEEEE HELP!
I am on Rogers LTE Network, HTC One, Canada.
I would really like to be able to flash the RageOne and have wifi work, PLEASE!!!!
millarrjm said:
please.
I have found lots of threads on this topic and nothing is working for me.
-i unlocked bootloader.
-flashed android revolution rom
>wifi stopped working..a device doesn't even show up to try and select just a blank menu (should be several routers showing)
-i have since tried using cyogenmod menu to do factory wipe/cache wipe then installed a new rom
- i have tried installing jmzstockattonedeodex, and rageonev.1.1.0 after doing factory wipe/cache wipe
- i then found "ruu_puccini_lte_rogers_wwe_1.26.631.4_radio_1.05.550i.09v2_30.68.550i.12_release_219377_signed"
but this file doesnt seem to open at all it is a exe... And now .......i now am starting to lose my mind
pleaseeee help!
I am on rogers lte network, htc one, canada.
I would really like to be able to flash the rageone and have wifi work, please!!!!
Click to expand...
Click to collapse
****. Now my ****ing internet wont work either **** me.
Please i need help asap!!! Someone pleaseeeeeeee
i cant believe i even tried this **** with my new device
i just want to go back to factory rogers setting for canada when my wifi and internet would work **** **** **** ****f uck :"(
Calm down. You found the solution yourself. That exe file is the ruu. Relock the bootloader put the phone in fast boot. Then run the program on your computer
gunnyman said:
Calm down. You found the solution yourself. That exe file is the ruu. Relock the bootloader put the phone in fast boot. Then run the program on your computer
Click to expand...
Click to collapse
So it didn't work..Also it said I have version 1.29.631.4 and this is 1.26.631.4 .. wouldn't I want the newer one? I never used a rom exe like this.. only flashed different rom zips from here.. the 3 available.
Also I am not posistive I MIGHT have used a "flash kernal" on one of the rom zips the android revolution one the very first time I installed it...
using "One_M7_All-In-One_Kit_v1.0" that is available here on at&t htc one part of forum. Then I kept reading and flashed it using recovery mode... and the rom worked well everything was fine except wifi... then today I flashed the others like I explained before trying to fix wifi and now the internet won't work as well. but the rest of the phone functions as it should and my carrier network works fine i can txt / call .
I follow your steps and it said this when I ran the exe..
ERROR[132]:SIGNATURE ERROR
The ROM Update Utility cannot update your android phone.
Please get the correct ROM update utility and try again.
--- Sorry this is kind of long, I just want to explain best for anyone reading this including yourself to understand what idiot things I did to bring myself to this conclusion, I am new to the community and a android noob
I have the same problem too,my HTC One wifi keep saying turning on and then error after root, i tried using the wifi tether app but its not working, any one can help please?
I've re-read your OP and you don't have the correct RUU for your device. You have an M7 not a Puccini, anyway like the At&T model a RUU for rogers doesn't exist yet.
As for fixing your wifi, your best hope is to restore your nandroid backup (I hope you made one) or find a Nandroid for your device. I know there's a thread over on the International forums with Nandroids in it, maybe find it there or make a request there.