Hi guy i m using 6.1 for son black it have a problem in network so i decided to go back to original rom by see o2 i did it finally but when i do bettery remove and place it again then set gone in boot mode and not started i try to update rom again but rom finished after 5 steps but my atom not in relief so pleas help me guys . Can i replace boot loader software please tell me witch type i found it.
Related
Hello,
I've a working OS 6.0 and beeing using it for last few months. I've done reformat with the same rom 2-3 times in between. Never had a problem until last night. I resetted the device after upgrading the rom and the screen was stuck on boot screen for long time. So, I did a bootloader mode (Camera key + softreset ) , which didn't come up. Nothing comes up now , and it drains the battery. Thats all I see.
Please help me with this issue.
thanks.
does you phone still turn on?are you sure you didn't flash a g3 bootloader on a g4 chip?that could brick the phone
Yes, it does turn on & stucks back in bootscreen. I can recharge the battery and all, but can go no farther. I've used the same rom before and worked fine everytime. So, I find it quite strange not to work now.
try flashing another compatible rom..or the original rom and them flash your wanted rom again..be carefull NOT TO FLASH A G3 ON A G4
Woohoo!! Got it working by changing USB port and retrying the bootloader mode. Worked fine. I think it's actually the Key combination bootloader mode that takes a little getting used to
Thanks all for your reply.
your welcome....have a nice one and enjoy yourr functional wizard
Thanks !
Wizard
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
NO need to worry. Just go to your bootloader mode. For MDA Vario its Camera + softreset key.
Than reinstall with a working rom.
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Which version do you have? G3 or G4? Is it SIM\CID unlocked?
hugomalheiro said:
Hello
I need help with my wizard !!!!!
i´ve tried to put a new Rom, mas the process stops sudenly.
and now i have the 3 colors , and i can´t do nothing.
can someone help me??????
regards
hugo
Click to expand...
Click to collapse
Download and flash official Rom in bootloaders (3 colors) screen,it'll recover back to normal.
Any news about ur Mda?
Sir,
can any one tell me how to restore my htc p3400i back to normal. i have a device HTC P3400i GENE100. i use a guide on this site of KRAZY_ABOUT i successfully install orefkov and after install that i upgrade my original ROM WM6.0 to cooked wm6.1 (by lemlon). after install the cook rom i get my device too slow so then i reinstall RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship.exe i was really dont know it was for old gene. after install it my HTC is restart and not booting up and not going into bootloader mode and i tried evey combination of key (camera+power button or vol+cam+power or press both "-" button and insert batt.)to go in bootloader mode.... PLZ Help me i m suffer with this problem.
http://forum.xda-developers.com/showthread.php?t=506467
now only gene jtag method can help u !
search for gene_jtag_restore_revised and u will find
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
amolji said:
I am in Big problem now... Help me Please..
When i try to flash to any rom now,
it gives this error no.206....
when i restart my phone it automatically goes in bootloader mode
now a new thing on extreme top right **RUU** is written ( remove * )
Help me please
my phone is dead,please give it a new life
Click to expand...
Click to collapse
install a new ROM thats it
PRoblem solved
Even my device is bricked because of this ROM
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
amit_nikharge27 said:
did u managed to resolve issue with your device,
i also flashed my device with this rom and now its over... my device is no more booting up, it not even gives any light or signal.. nothing
Please help me with this
Click to expand...
Click to collapse
hi amit,
i am also finding the solution for this. but now i m sure i have only last way to restore this with JTAG method, so i m collecting information about this JTAG method, if i able to restore my GENE with this i will definitely create a full guide for new bee who are struggling with this problem...
so keep u r eye on thread.....
bye....///
Hey hi, guru,
did u managed to restore your device using JTAG method.
could you please share me the steps if you have resolved it.
any one need information on j-tag.....?coz i recovered my lost gene b4 6 months ago using this j-tag.....so simple.....
Why do people go around flashing ROM's blindly?? :angry:
It is clearly mentioned everywhere i read not to flash original ROM's without removing the radio parts..
Please don't flash a rom who contains IPL, SPL or GSM. It will brick your device. Sometimes in a irreparable way.
People should pay more attention to everything mentioned here..
Hi rony_z367,
b4 8 months i lost my mobile due to upgrading spl,but it was in warranty...
now my gene is working fine with cooked roms but still i want to know about J-Tag.
sry abt my english
It is the process of recovering the memory addresses of ur ARM where u can directly connected to the respected hardware & re-program that h/w with ur given addresses.....but its so risky.....finaly ur addresse comes to 00....
Actually i didn't understand it completely..
but thx for info..
the pleasure is all mine.....thnx......
Hi
i got a new t-mobile htc hd2 a few days back later
i don't know what happens to it first it get started and stuck on the main screen of startup "stick together"
and i go to market and now the phone do not turns on when i tried to turn it on
so guys please help me what i have to do now
any solution any custom rom--flashing please help me
thanks to all of you
it's not "bricked" mate, bricked means that not work nothing, no bootloader no nothing ( as mine )
phone stay in black screen.
maybe you solve re-entering in bootloader mode ( tri color screen )
and re-flashing phone
so what i have to do now brother
please help me i want to use it
i am waiting for ur reply
thanks
mianhadi143 said:
so what i have to do now brother
please help me i want to use it
i am waiting for ur reply
thanks
Click to expand...
Click to collapse
Download a t-mobile rom stock rom first - be very carefully dont use other rom
Just go into bootloader - torn one phone while pressing volume down until you se tricolor screen... connect with pc and wait until drivers are installed and then flash the rom
ubejd said:
Download a t-mobile rom stock rom first - be very carefully dont use other rom
Just go into bootloader - torn one phone while pressing volume down until you se tricolor screen... connect with pc and wait until drivers are installed and then flash the rom
Click to expand...
Click to collapse
You need to make sure you download a rom based on your version of HD2. Do you have the European version, or Tmo versoion?
Dear All,
I hope someone can help me get out of the situation.
I am using this FEITENG HTM H9001 6 Inches China Phone.
It came rooted by the vendor.
It is a good and nice phone. And I like it alot.
After I install a "font changing" apps,
The phone auto shut off and restart and it stuck at the HTM logo.
So sad Sad.
I know I need to reflash the firmware.
So I did some search on line...............
After finally managed to install the USB's driver which I was not able for quite long....
I follow the instruction on youtube from this site.
Down loaded the flast tool - SP Flash Tool v3.1332.0.sn187
Go to needrom to get a HTM H9001 firmware.
It should be there "right firmware". Someone there on the page where i got the firmware for H9001 said that its stable after he flash it. So proceeded to download it. Safely assume its the correct rom.
Using the flashtool, I followed the flashing steps exactly untill the green sign appeared. I was looking forward to see it start again after the problem mentioned above...........
After pulling out the cables from my PC, I press the power/start button of the phone to check if its ok....BUT It did started but it only shows "whitish color screen"
I can't even see the usual green colour HTM logo when the phone was switched on but I can hear sound of the phone starting... it stays at the whitish screen. And when I touch certain part of the screen the phone seem to response...just that I cannot view the desktop and the icon.. perhaps the video driver was corrupted in some way...or could it be the wrong rom
I proceeded re-flash it again........
same result - white screen.... phone still response to " power switch when press the LCD goes off. and some responsive sounds when the blank screen is touhed...
I am here in hope for some luck in finding ways to recover my phone back to normal...
It all started from installing a font changing apps that corrupted the firmware...than perhaps my action may have complicate the situation further....
Please. Any help would be great.
Thanks so much in advance.
How can I make good back my Feiteng HTM H9001
Or did I got the wrong ROM ?
It did not stae Feiteng just H9001 .
The rom I downloaded for my phone is here for my Feitend HTM H9001.
Is this the correct rom for my phone ?
Appreciate , really needs help to get out from this problem.
I love this phone. I want to make it good again Smile
I will try to upload some image to show its current stae.
many Thanks in advance.
Desmond
So desperate..I uses this MTK Droid tools.
I turn the phone on and it detected the details on my phone.....
Is there any way to use other tools to get my phone back to working like before the "font changing apps" time .... it was working great just before with no problem at all.............
MTK droid can detec the details of my phone...........
BUT i am lost - any way to use Droid tools to save the situation ?
I attached some picture to share what I meant...
Hope some nice great guys can shed some lights so i can try to move ahead..currently really lost... newbies to android phone....
Many Thanks
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Repair HTM H9001
moneycow said:
Anyone can help ?
How do I redo the rom all over from scratch ?
Or can I try to reflash other rom or install say other OS on my phone ?
Just want to make it work again..............
Thanks
Click to expand...
Click to collapse
Hello friend,
if you want to recover your H9001 look this link:
movilesdualsim com htm6582
on the site will explain the steps to solve your problem.
To me it happened to me same thing that has happened to you.
And now I enjoy my H9001 more than ever.
regards
Hello,
I bought this phone today from a guy 2nd handed but 2months old or so...
When i was at home i wanted a costum rom since it was running on 4.1.2 and installing a costum rom was a completely mistake i guess...
So decided to back to a stock frimware which i download from Huawei offical site and put on my SD card dload>update.app after going into recovery mode he loads all the files until system after my phone closes his self and most of time he doesnt go out of boot on the huawei logo for what i waited was 30min 2-3times...
What do i wrong..i've used samsung and that was much easier
Please help me someone whit this problem and i hope i could explain it good