i tried to upgrade my PDA I-paq 6815 bt after some tyme its nt being detected by WMDC. please help!!!! the device also hungs
i also faced the same issue, i got the usb point repaired and now it is working fine
Related
1.I noticed that the phone won't connect anymore to the pc trough active sync or wm5torarge
so
2.I tought it can be some problem with active sync and i reinstalled it but again no connection
3.I hard reseted the device..and after that the phone wasn't having sound and when it had the sound was going very fast and at a low volume
i'm using windows professional 6.1 v2 of erofich
the cable is ok because the charging light turns on when i connect the device
and i can't reflash cause i can't copy spl files to jump in bootloader mode
anybody can help?
Use original cable
is the original one
You could try flashing it via microsSD card:
http://forum.xda-developers.com/showthread.php?p=1304238#post1304238
Hope it works for ya.
btw...you sure got a weird avatar
i'll try nirak
problem solved..after a few restarts the phone..somehow..connected...after that i flashed again and now it's working
thnx Nirak and darfri for your replies
Hi,
A friend gives me a Qtek S200 G4 WM5 with IPL 2.09.0001 and SPL 2.09.0001
But the USB doesn't work, it's detected as unknown device (checked in 4 windows XP)
With an USB tool i can see that it's HarwareID = USB\UNKNOWN, the same with CompatibleIDs = USB\UNKNOWN
by this the XP doen'st found any drivers avilable (yes I have ActiveSync installed)
I stay in the same situation in 3 colour bootloader mode, when I put the USB cable in the Qtek it marks USB at left bottom but the Windows XP only detect the usb connection as an unknown device.
What can I do?
There is another form to upgrade to WM6 and upgrade the SPL,
some direct SERIAL access to testpoints/pins ??
Anything can give me a clue!!
Thanks.
Just as first,
uninstall the unknows device of your hardware config, connect the phone again, and install the drivers manually, so dont use auto install...
when u have done this, just remove the cable out of the phone, and put it in again after 30 seconds.
if it's ok, it will be ok.
from then on you can flash your phone!
...
if its not working your bootloader is ****ed up, or try another USB port on the pc otherway your cable or port(on phone or PC)) will be not good...
...
other way to do it, just install windows xp pro insteed of home...
install active sync, and put the usb cable in the pc and in the phone, it will help alot...
...
It can be that u have to try another cable if u buy an mp3 player or digital camera, almost all cables are the same as the usb cable of the prophet you can try this cables also to get it working!!
Windows XP Home edition doesnt find this drivers everytime.
Windows XP Pro will have no problems at all...
which driver should be installed manually ? is there any driver for download ?
I have exactly the same problem...
I´m still trying to figure whats wrong, but getting help is difficult sometime...
Hey guys,
i have a little annoying problem with the USB cable for the HD.
since yesterday, it wont respond.
im getting thos messages:
http://img29.imageshack.us/my.php?image=capturenwk.jpg
http://img20.imageshack.us/my.php?image=capture3chj.jpg
i cant Sync between any files and that sucks..
anyone knows how to solve this problem? the USB cable only charging my device and with now sync.
IM USING WINDOWS 7.
can that be any related?
the system updated last night and since then it happened
TNX for the help..!
BTW, i tried RESET the comp, the HD, and nothing changed.
USB Device Not Recognized
was this working before? you say you are using windows 7
is that a new install and now you cant connect to your phone?
you can removing the updated drivers that was installed, this could put things right for you.
try removing activesync and do a fresh install of activesync and if that does not help remove usb drivers and re-install them with out connecting your hd.
almost every time i have had my pdas or phone not being able to connect to activesync it has been software or drive related.
hope this help and you get is sorted
i'm trying to connect to Kies on my work PC using XP SP3.
i've fired up the latest version of the application, installed the drivers via the Tools menu option and then connected the phone.
everything seems to go fine and the application briefly shows "connecting" but then i get a Found New Hardware error that a problem occurred and i have a USB device not recognised.
any ideas ?
I had a similar problem and the solution for me was buying a new cable!
After that it worked fine!
guys I am having an issue related USB connectivity .. since yestarday whenever I connect my S2 to computer it says USB device not recognised .. I tried connecting and disconnecting .. several times .. then after I think 10 or 11 times it connects normally .. ( as media device) .. then today .. it is having same issues .. I tried connecting many times .. but today .. it doesnt connects .. it charges normally on USB but no USB connectivity ..help guys
You need to look at PC side stuff first. Uninstall Kies, reboot the PC, redownload a new copy of Kies, install it (it has the drivers you need), reboot & try again.
Then clean the port on the phone & if it still doesn't work, replace the board/port (even though it's still able to charge, it sounds like this could be the issue).
I am having the same issue ... I came to the conclusion that it is a hardware issue... Even though ït first happened after messing up with fast charge toggle in some rom.
Nor adb nor odin works
Advices before you go to any center (because yours seems to have worked more than mine ...the 11 times, after the problem first occurred ) :
Try different cable... Firstly.
Try to switch from mtp to ptp a couple of times with the device plugged in.
Try reinstalling drivers...
Try disabling and re-enabling usb debug setting while in mtp .
today I tried to connect the phone .. nd it connects normally .. I dont know what was wrong .. well its fine now .. thnx for ur help guys ..