Due to some display issues I must send my Hermes to service... but... i have HardSPL (I still have oryginal WM5)... plz help! How to remove HardSPL?
I'm from Poland, and this is oryginal unlocked mobile.
When I flashing the HardSPL the `old SPL` was: 1.18.255.3
please help!
Related
Dear friend,
I have updated my O2 tytn (bootloader 1.04) with the dopod rom.
I like it but I want to try the new Imate rom.
I have tested it but I don't like it, I prefer dopod rom.
Now, I want to return to dopod but the bootload is 1.06 now.
How can I return to the first rom?
Now I'm flashing it with the original rom from O2, the only one I can use.
The problem is that I want an English rom.
There is someone who know the solution for this problem?
Regards
Daniele
Flash a 1.04 bootloader with your original CID (o2). then you will have to flash back to the dopod.
Ok thanks...I'll try it.
Regards
Daniele
Do what barrydavisjr suggests, and when you are on 1.04 bootloader then CID-unlock your device, then you don't have to worry about bootloader version anymore.
See here for the CID unlocker:
http://forum.xda-developers.com/showthread.php?t=282073
Hello,
maybe someone can help. I need to change the language of a new HTC TOUCH DUAL NIKE from Italian to German. I tried already with a RUU firmware but it seems to old. Do someone have a new firmware in German ?
Thks in advance.
Roland
http://forum.xda-developers.com/showthread.php?t=384924
MCS
Hi,
thks for the advice.
I downloaded WM6.1 GER Niki netDrg BR but it does not work. There comes always error 262 (update error).
The actual version is:
ROM: 1.31.408.09 dated 30/10/07
RADIO: 1.58.16.27
PROTOCOL: 25.61.30.03H
EXTROM: 1.31.408.8601
Maybe you can help me further.
bye
roland
Unzip the *.exe and try again!
Flash without Sim and SD Card.
MCS
Hello,
thks, but the same problem. On the phone's display it writes 0% and then the error comes. Phone is still ok but firmware does not match on this phone.
maybe you find a solution.
thks
roland
Read the Threads ... without HardSPL you cant Flash a Cocked Rom. If you are sure, you have a HTC Niki and not a HTC Neon??? If you dont know this ... read wiki!
Hi,
it's a HTC TOUCH DUAL 5520 ITA. Should by Nike ?
How is USPL or Hard-SPL done ? From the link you postetd I could not understand.
bye
Roland
So what's unclear? In this thread it's all desribed perfectly in my case!
SoftSPL, USPL and HardSPL for Nike
Hi,
perfekt! With the new bootloader it flashed immediately.
Many Thks.
roland
Hey Folks,
i have a problem with my Prophet G4 from Vodafone (Germany). As I have
guaranty for my device i would like to send my device to Vodafone.
But my problem is that i have flashed a new WM 6.1 and so I changed
my SPL to 2.G4.4PDA but Vodafone do not repair modified Devices.
I have already flashed the "original" Vodafone Windows Mobile but still
have the "wrong" SPL.
So my question is: Can someone provide me the SPL 2.15.0001, and tell me
how to change the SPL ?
Kind Regards
Vaothien
vaothien said:
Hey Folks,
i have a problem with my Prophet G4 from Vodafone (Germany). As I have
guaranty for my device i would like to send my device to Vodafone.
But my problem is that i have flashed a new WM 6.1 and so I changed
my SPL to 2.G4.4PDA but Vodafone do not repair modified Devices.
I have already flashed the "original" Vodafone Windows Mobile but still
have the "wrong" SPL.
So my question is: Can someone provide me the SPL 2.15.0001, and tell me
how to change the SPL ?
Kind Regards
Vaothien
Click to expand...
Click to collapse
I only have the 2.20.0001
original qtek rom.... want it?
On the list of available shipped ROMs, some of them come with an SPL whilst others don't. The shipped QTek should have an SPL. Try and flash that, and then the operator branded ROM.
I think, the one from XDA Neo from O2 has this SPL.
Maybe you can download it from O2 Germany first. But be sure, that you have HARDSPL Your device.
O2 ROM has SPL information on it.
After flashing from O2 ROM.Try to reflash it again with lazytool and nk.nbf file from original Vadafone ROM
But the problem is. Do you have the original vadofone ROM?
If not, that is something not good.
If you have something to ask. PM me.
Schick' mir ne Nachricht. Okay.
Thanks for your help.
I sent my Device with branded Vodafone OS and the Qtek SPL to service. All seems to be ok ...
Vaothien
vaothien said:
Thanks for your help.
I sent my Device with branded Vodafone OS and the Qtek SPL to service. All seems to be ok ...
Vaothien
Click to expand...
Click to collapse
na gut, wenn es kein Problem für dich wäre.
--------------------------------------
okay. When it is okay for you.
dear friends,
I have a HTC with japanese language. and I wnat to upload a wwe rom.because the rom is japanese. I downloaded upgrading rom RUU_Hermes_QTEK_WWE_2.11.255.1_102_6275_1.38.00.10 _108_Ship.exe
but can not upload it, allways geting error [294], pls I need urgent to converet this device into wwe rom. any help just urgent need.
regards
phone info:
HTC HERM200 (X01HT) SOFTBANK
ROM 1.33.761.9
DATE 07/05/07
RATIO 1.46.00.10
IPL-1.01
SPL-2.03
I played with it but now in bootloader mode SPL shows 1.11
I can not do hard-SPL too at all
You needed to do some reading about the softbank, these are a major problem to unlock and upgrade depending on what version you have. In all likelyhood you have bricked your Hermes.
Do some research to see but most people don't like to give advice on the softbanks as no one likes to be responsible for the death of another persons Hermes....
I already read all the forum but could not find any solution, many document and post read about softbank, but never could upload WWE rom
hope someone will explain a proper way..
regards..
Hi,
I´ve an HTC Wizzard / T-Mobile MDA and i think AKU 3 was installes.
The bootscreen say :
IPL : 3.08.0001
SPL : 3.08.0001
GSM : 02.69.11
OS : 3.8.2.2
Is ist possible to upgrade the Rom to any custom Firmware?
I´ve found that this is an G4 phone but im not sure it´s possible to upgrade.
Maybe you can tell me it´s possible or not.
I hope my eglish is good enough so that somebody understand what i mean.
yes, you can
o0opaniko0o said:
Hi,
I´ve an HTC Wizzard / T-Mobile MDA and i think AKU 3 was installes.
The bootscreen say :
IPL : 3.08.0001
SPL : 3.08.0001
GSM : 02.69.11
OS : 3.8.2.2
Is ist possible to upgrade the Rom to any custom Firmware?
I´ve found that this is an G4 phone but im not sure it´s possible to upgrade.
Maybe you can tell me it´s possible or not.
I hope my eglish is good enough so that somebody understand what i mean.
Click to expand...
Click to collapse
hi, yes, you can flash a new rom, but first of all, read , read, read and then read again, the process is very simple once you have readed the faqs (stickies)
good luck !!!1
Thanx for your answer!
I´ve read the Wiki and the sticky´s in this forum, i´ve searcht for my IPL/SPL Build and read this topics too.
But i´m unsure.
In the past (when the Wizard was new for me) i´ve read that the IPL/SPL 3.08.0001 (AKU3) wasn´t possible to upgrade .
Now i can´t find anything about that but i´m unsure.
Then i´ve read about Soft an HardSPL Flash but what is the best for me?
I´ve read that SoftSPL was better if you have warranty on your phone but my phone havent any warranty because it´s to old.
Should i use HardSPL to permanently remove the CID lock (then i should use only G4Save Rom´s - Right?)?
So Steps i want to do now to upgrade my Wizard :
1 . G4 Hard SPl CID unlock
[Solution] G4 Hard SPL (CID unlock)
But this tutorial say´s (After reboot the IPL version is : 2.21.0001 and the SPL is 2.21.olip) can the IPL 2.21.0001 boot the "old" AKU3 T-Mobile Germany Rom or must i update the rom with Mun's RUU imediatly?
2. I Update the rom with Mun's RUU after i´ve read this ROM Features, Ratings, Information and Program List topic to chose the best rom for me, G4 Safe only!?
Right or have i forgot some steps?
It´s done,
i´ve read some topics again and again und then i used the SoftSPL CID unlock and flash my wizard succesfull.
Thanx!