Ok, I'm a frequent reader but this is my first post, so bear with me here.
I've flashed many roms, many times, and have even attempted to cook my own so I think I'm pretty competent, however the one issue that i have that I can't seem to find an answer to no matter how much searching I do is the fact that with WM6.5 (and it doesn't matter what build because it's and issue that has happened on all of them)....if I install M2D, my wifi connection keeps trying to search for an access point. It won't connect if the switch is off, it just blinks every so often like it's searching. Really makes me upset when I'm trying to listen to music or watch a movie (yeah I'm one of those guys who uses his phone for EVERYTHING). WM6.5 works fine by itself, no matter the build, and on a wm6.1 rom, M2D doesn't give me that issue. I did notice that there was an advanced config program on a 217xxx build of 6.5 and in there is a setting for wifi scanning, no matter what I change it to, it doesn't seem to save and my wifi still searches every 20 seconds....just like it says in that default setting.
Any suggestions or solutions? I would like to have both on my phone for the sake of variety....it is the spice of life so they say
Have you td using your Comm Manager to turn WiFi off after M2D turns it on?
Of course....comm manager was the first thing I looked at. Like I said, there's an "Advanced Config" in WM6.5 and in there under Network, is a setting for Wifi scan that is by default every 20 seconds. I try to change it, however it seems like any change doesn't save and it reverts to the default 20 seconds
I found that if I install the 10 button com manager my wifi goes haywire... however, with the stock com manager it seems to work fine.
I have it stock, haven't installed any other comm manager
Same problem here!!!
djsplitimage said:
Of course....comm manager was the first thing I looked at. Like I said, there's an "Advanced Config" in WM6.5 and in there under Network, is a setting for Wifi scan that is by default every 20 seconds. I try to change it, however it seems like any change doesn't save and it reverts to the default 20 seconds
Click to expand...
Click to collapse
Same problem here - not sure what to do...
Related
Hi everyone! I've read these forums for a long time but haven't posted much before. It was doing my research here that led me to buying my Prophet. It couldn't have been a better decision, so thank you! I owe you guys one.
So... I thought it might be helpful to list the issues people have been having with their WM6 builds so far, since right now the problems seem to be spread through other threads. I flashed the PDAViet 4.0.0.0.3 two days ago, and although it runs pretty well, I've run into a couple of problems that other people have seen too:
1. Wifi works only sometimes. I'm really not sure what causes it, but it will always work properly again after a soft reset. It doesn't seem to matter how long my Prophet is turned on - I soft reset last night, put my phone down, and tried the wifi again this morning, and it worked fine. I'm guessing that it might be some other program or system process that's interfering with the wifi/wlan.
2. MMS/SMS. Since I don't use MMS, I can't speak for myself, but I've read other people are having trouble getting their MMS to work properly. I've also read that a small minority of people are having trouble with their SMS. Can anyone confirm/deny this?
3. Missed calls. People have posted that their phones sometimes just won't ring, and they get missed calls. Some say that this can be fixed by downgrading to the 2.19 radio ROM. Has anyone tried this, and did it work?
4. Bluetooth. I haven't had any bluetooth problems, and the bluetooth keyboard I installed works great. However, I've read that other people have been having some problems. Anyone care to comment?
5. Battery troubles. People have said different things about whether or not their WM6 ROMs use more power than WM5; I'm not sure that it actually makes much of a difference. One thing I did notice, though: my Prophet will charge fine when attached to my PC's USB port, but not when plugged into the wall! The yellow light comes on, and it looks like it's charging, but the battery continues to drain. This is easily one of the weirdest problems I've had.
If you have other problems/errors using any WM6 ROM (not just PDAViet), please add on to the list! Say what the problem is and what ROM you're using. Also, if anyone knows fixes for any of the problems, add them here too!
TrueNeytral 1.4 MS BT.
Very few issues. No problems with Missed calls, MMS, BT or battery (10% per day with 2 calls each day). Wifi varies a bit - but no real problem.
Once I mistakenly pressed the flight-mode icon, then turned the phone back on - I didn't recieve SMS for two days, until I re-booted. Strange...
7. Sporadically missing email, wifi and bluetooth settings after soft-reset, even if we turn off the phone everytime a change is made.
Occasional missed calls; seems like they just go right to voice mail sometimes.
Battery life fair with Radio 1.40; it may be a little better with 1.38, hard to tell; definitely better life by turning off 3G
Some minor incompatibilities with BatteryPack Pro, mostly visual things, nothing functional so far
In Windows Live, when checking email if I close an email message Windows Live closes and sends me back to the Today Screen; if I 'reply' to an email, then 'cancel message', it will send me back to the email list, not close the program and return me to the Today page. This bug disappeared for a while and the email functioned properly until I flashed a new radio ROM(1.40), then bug returned
rjtd said:
7. Sporadically missing email, wifi and bluetooth settings after soft-reset, even if we turn off the phone everytime a change is made.
Click to expand...
Click to collapse
Yeah, me too. I didn't see it happen with my email, and I don't use the bluetooth too much, but it seems like the settings for my home router would mysteriously disappear whenever I soft reset, and I'd have to put in my password again.
Hi
Zoltair Wright said:
Yeah, me too. I didn't see it happen with my email, and I don't use the bluetooth too much, but it seems like the settings for my home router would mysteriously disappear whenever I soft reset, and I'd have to put in my password again.
Click to expand...
Click to collapse
I have the same problem. What I've seen: I only loose mails, internet settings, Windows Live Messenger settings, if I use soft reset harware button. Try to use an software program that allow you to soft reset device like XCPUScalar which put in system tray an icon for that function.
If you find something else to remedy that problem please anounce me
password
Don't forget the password issue.
An important feature for business users - I guess.
After this upgrade using the SPRINT ROM, I cannot use my WIFI, when clicked it just turns right off, anyone have the same issue?
cityguru said:
After this upgrade using the SPRINT ROM, I cannot use my WIFI, when clicked it just turns right off, anyone have the same issue?
Click to expand...
Click to collapse
try going turning on the wifi switch and then hitting the wlan button in the comm manager
Of course, that doesnt help, it still goes off, if i do as u say anyway I can see its off by going to "Advanced" tab under wireless lan and it says under status Wireless Lan off
I am clicking to turn it on, its just now staying on
so is it working ??
its not working on mine either
Mine is not working either. If I go to comm manager (with switch on), it appears to turn on and then off within a second or two. A search for networks in my area returns nothiing (I am sitting one room away from an access point).
tisenberg said:
Mine is not working either. If I go to comm manager (with switch on), it appears to turn on and then off within a second or two. A search for networks in my area returns nothiing (I am sitting one room away from an access point).
Click to expand...
Click to collapse
me 2, i run navizon all day to find wifi aps and cell towers and my wifi never works anymore, i drive flipping my wifi switch on and off and maybe it will work for 2 aps all of a sudden after 15 minutes, then somedays it will just kick on when im flipping on and off and find 500 aps after a few hours of driving...but 97% of the time it doesnt work and i try every combination of turning it on to get it to work
t0mmyr said:
me 2, i run navizon all day to find wifi aps and cell towers and my wifi never works anymore, i drive flipping my wifi switch on and off and maybe it will work for 2 aps all of a sudden after 15 minutes, then somedays it will just kick on when im flipping on and off and find 500 aps after a few hours of driving...but 97% of the time it doesnt work and i try every combination of turning it on to get it to work
Click to expand...
Click to collapse
Same problem here, never got it to work. maybe it's a hardware issue.
Sounds like G"reloc related . What option did u select in kichen?
Well I'm running DCD's 3.04 ROM with Sprint 3.35 Radio and have no issues at all with WiFi...I just checked!
wooppps i fill like a dumb a$$ i just checked my router and its acting up so i changed some settings on the router and now it works lol
WIFI not Work aybe solved..
CHECK THE SWITCH THE LEFT SIDE, MAKE SURE WIFI SWITCH IS ON.......
ITS PHYSCALLY ON THE LEFT SIDE. IT MANUALLY TURNS ON AND OFF THE
WIFI.....
I've owned a Touch Pro for a few months now and overall it's a good device. It has its quirks, but then again what phone doesn't? There is one problem in particular, however, that I can't seem to figure out. I've searched up and down in XDA Forums, and on Google, and I just can't find out a fix for my data connection always turning on for no reason. I have all my e-mail accounts set to "manual send / recieve", the weather program set to "update weather manually", and as far as I know there are no other programs on my phone that have access to the internet without my permission.
The problem I have is sometimes I will wake my phone up from its sleep mode, and I will discover that the data connection is active and appearing to be transmitting. Also, EVERY time I restart my phone and it goes through the boot process, the data connection will re-activate even before TouchFLO 3D opens up on the today screen. It's really annoying, because I have no idea what's causing it to do this, or why it does it at random times, or whenever I reset my device.
Does anyone have any solutions to this problem? I hate having to manually go in periodically and make sure my data connection is set to "off", instead of having it stay that way when I set it.
So no help on this one then?
I don't have a solution but I can help by bumping your thread and saying I have the same problem on Verizon. I was at a friend's place all weekend, and he has wifi all over, so I turned off data and used his wifi instead. Well sure enough all weekend my data connection kept turning itself back on. It seemed to happen only when going into sleep mode. So I kept the phone plugged in so it would never totally "sleep". Wifi stayed connected with no data connection starting automatically. Annoying especially considering the 5 GB data limit on the PDA plan.
Well I'm glad I'm at least not alone on this one. It's weird too that even though your device is on a different carrier, it still does the same thing. I wonder if it's a hardware issue?
I know that someone has to have an answer for this...
go into pocket express and press menu then go to express settings then on the top left theres a pulldown press it and go into auto updates and turn it off.. pissed me off when i got the phone.. couldnt find a fix till i started going through all the programs to find the one doing it.. and it was the stupid Pocket Express
I have had my MDA Compact V for a few months now, and it's only recently that I've had the same problem. Each time I switch on, my data connection starts or alternatively if I loose signal then get it back then I see my data connection is on again. Thankfully I have the Solo 20 package with unlimited net usage (although you're are limited to 1Gb/month) but it drains my battery really badly.
I went through every possible setting and program to switch off location settings or auto downloads/updates and I still have the same problem, but I downloaded Data Controller v1.00 from Freewarepocketpc.net and I can toggle my data connection on or off as I please.
Heres what you need
Install below cab, then use the NODATA app, select what you want off, PHONE AS MODEM and DATA are your two options I believe... Your data will never come back on... until you re-enable it that is....
PS... THIS IS NOT MY CAB, THIS IS SOMETHING I FOUND WHEN TRYING TO ADDRESS THESAME PROBLEM YOU ARE HAVING. THIS CAB WAS DOWNLOADED FROM MoDaCo BUT I DONT HAVE THE LINK... ALL RESPECTS GO TO HIM... I AM JUST SHARING WHAT HAS WORKED FOR ME IN THE PAST...
Seems it's one or the other
What sucks is on my Sprint HTC touch pro 2 (cdma), I was having a problem where I couldn't answer calls all the time, but sometimes I could, and eventually found that it was always when the data connection was showing active is when I couldn't answer a call. But when that was happening, my data connection would turn back off after a few seconds when I was done using it. It was driving me crazy not being able to answer my calls and I finally found a post that let me correct that problem, it was changing the HKLM\Comm\ConnMgr\Planner\Settings\SuspendResume value that fixed this problem... the value of this registry setting was originally "GPRS_bye_if_device_off". This setting made it so the data connection would turn off when not being used, but it apparently messes up cdma phones from being able to switch over to answer an incoming phone call if the data connection is active. I changed this registry entry to "#777" as the post said to do, and sure enough, that corrected the problem with being able to answer my calls if the data connection is active. I'm real happy to have that working now, but when I changed this setting, my data connection is now always showing active (white arrows showing in status) and even if I turn it off manually, it comes on by it's self way more often than the every 4 hours I have it set to check emails.
There is a registry setting called CacheTime under the same Settings key as the above mentioned registry entry that I changed, that when the "GPRS_bye_if_device_off" value is used, the CacheTime key value will indeed control how long the data connection stays on before automatically turning off. But When I change the Entry to "#777" which is necessary to allow me to answer calls when data is active, then changing the CacheTime value has no effect and the data connection stays on until you manually turn it off.
I'd like to find a way to turn the data connection off, while still not messing up me being able to answer calls when the data connection is active, and seems to me that if both of these things can be done separately with two different registry settings, that it must be possible to do both.... so if any of you tech wizards can find a way to do this, I'd love to see it!
Possible Fix?
Hey, I have noticed the same problem. It is annoying from a battery life aspect as well as a system slowdown when coming out of sleep. I could not find much of a workaround except one of the settings in TD3 Tools I installed. In the "Data Connection" tab you can yurn on an option that makes your "End" key also terminate an active data connections. So if you hit it after waking your phone you won't have the annoying slowdown with your Sense UI...
I've had a mini pro for a while and I am very happy with it - but I do have one slight niggle with the WiFi..
When its connected to my home router it works great - until the screen times out and the powersaving comes on. At this point when the phone is used again the WiFi icon shows as connected but its not connected to the network and can only be convinced to work again and it needs the wifi resetting by switching it off and on again...
The firmware is the A012 but this wasnt a problem at first so I am wondering if it was something to do with an update or a piece of software...
If anyone has any suggestions..?
fortunatly that one is easy to solve.
- Go to wifi definitions;
- press menu button (is the one with four squares).
- Select advanced;
Then you will have something like "wifi suspension policy", you just have to alter that to always connect or something. My phone is in portuguese so I cannot say exactly what it will appear in English but I think you can get the idea.
Regards
MrMustaine said:
fortunatly that one is easy to solve.
- Go to wifi definitions;
- press menu button (is the one with four squares).
- Select advanced;
Then you will have something like "wifi suspension policy", you just have to alter that to always connect or something. My phone is in portuguese so I cannot say exactly what it will appear in English but I think you can get the idea.
Regards
Click to expand...
Click to collapse
Already found that and changed it and it still didnt make any difference unfortunately. not sure what else I can do.
I had the same problem. What is your wifi encryption type?
I was on WPA-PSK and I saw on a Japanese forum that if you change to WPA2-PSK it would fix the problem which it did! Let us know if this helps you.
hi, i think this will fix permanently until the phone updated to 2.1 but there is a solution before that which i have experience and come up with 2 solution:
firstly install wifi fixer, its free on the marked.
setup to never off mode on settings.
1. if the phone connected charged, the wifi always on even the dispaly off
but i don't recomend to do this with the batt fully charge, because it could make batt live shorten(overcharge), i think.
2. this is abit tricky but it works .. it make the wifi always on without connected charge by:
- install program called gmote than run it, if possible setup to connect to the server, but dont have to.
- and the tricky is, before the phone display off or you are not playing with phone, run the gmote and make sure the gmote program run in the DISPLAY PHONE (mine in gmote browse mode) and leave it like that, than you can leave the phone.
i used this all the time and it works, even i leave the phone for long hours and than check it ... wow the wifi still connected and i tried browsing internet.. amazing ... it works but i see it drain the batt faster .. lol
hope this solution can help anyone
now ive tried many key words and phrases to search, maybe im just searching wrong or something but i cant find any fix to this yet im sure others have experienced it.
basically my data keeps turning on every 10 minutes or so after i switch it off. no programs are running, weather not set to update, youtube hasnt been set to login and neither has twitter, activesync set to usb. the only home screen tabs i have are messages, internet, photos&vid, and weather. time isnt set to update via internet. auto update of database within the data connection are turned off, auto config turned off
im on the verge of hard resetting.
not sure, but maybe WMLongLife could help to identify the culprit, as with each new connection it asks you to define connection type/access
go to settings tab / more / connections / connections / advanced / choose networks -> programs with automatic internet access use: set to "firmennetzwerk" (i guess its work network or something similar).
now your phone doesnt connect data anymore..
if you want to connect it again, you have to change that again..
DN41
b-16707 said:
now ive tried many key words and phrases to search, maybe im just searching wrong or something but i cant find any fix to this yet im sure others have experienced it.
basically my data keeps turning on every 10 minutes or so after i switch it off. no programs are running, weather not set to update, youtube hasnt been set to login and neither has twitter, activesync set to usb. the only home screen tabs i have are messages, internet, photos&vid, and weather. time isnt set to update via internet. auto update of database within the data connection are turned off, auto config turned off
im on the verge of hard resetting.
Click to expand...
Click to collapse
Did you uncheck "My Location"?
have you tried the "no data.cab" file works for me
yea ive looked into the above solutions but didnt want anything semi-permanent.
ironically i soft reset the device about 4 times within 30min and its back to normal now...go figure.
Search for dialup enablerdisabler. Install it first thing after a new Rom. Goto start find it and disable data once and for all
Sent from my HTC HD2 using XDA App