hi..........
i can try wrong rom of hp 62 on my o2 XDA atom, then my o2 XDA atom not working like, it will not booting totaly this reason it will not connect through usb to pc please help me .....what i do now.........???
if it cannot connect to PC via USB than i have no idea...
I believe you could take out your mini-sd, and copy a correct rom with card reader to the SD card and reset your rom.
eggegg88 said:
I believe you could take out your mini-sd, and copy a correct rom with card reader to the SD card and reset your rom.
Click to expand...
Click to collapse
just try to do hard reset...
mustbiw said:
just try to do hard reset...
Click to expand...
Click to collapse
i will not always work... Or you may try a hard reset and then make it to factory settings and reinstall
deepakdhl43 said:
hi..........
i can try wrong rom of hp 62 on my o2 XDA atom, then my o2 XDA atom not working like, it will not booting totaly this reason it will not connect through usb to pc please help me .....what i do now.........???
Click to expand...
Click to collapse
Have you search on Wiki?
check this
may be it will help you.
http://forum.xda-developers.com/showthread.php?p=5331048#post5331048
check the 8th post.
Related
Hi,
My XDA II was up and running until I wanted to flash it with Wm2003se.
I not sure if the battery is fading out or what but the flash didn't conplete and I am left with the "serial 1.06 boot screen" I have tried numerous times of taking out the battery, letting everthing drain out and trying again. but it still goes back to the serial screen. Also activesync won't recognize the device and Windows XP picks it up as "Unknown Device". When I try and reflash it, I get the "communication error". Could someone dump thier Rom and/or instruct me on how to flash my device using my SD card?? Or if there is another way to revive my XDA II, I am open to anything. Thanks!!
Shane
Hi
Am also facing same problem on my O2 xdaII..it always shows serial v1.02
can any one help us pls..
tks isse
Hi
same problem whit MDA ll t-mobile de.please help
shane said:
Hi,
My XDA II was up and running until I wanted to flash it with Wm2003se.
I not sure if the battery is fading out or what but the flash didn't conplete and I am left with the "serial 1.06 boot screen" I have tried numerous times of taking out the battery, letting everthing drain out and trying again. but it still goes back to the serial screen. Also activesync won't recognize the device and Windows XP picks it up as "Unknown Device". When I try and reflash it, I get the "communication error". Could someone dump thier Rom and/or instruct me on how to flash my device using my SD card?? Or if there is another way to revive my XDA II, I am open to anything. Thanks!!
Shane
Click to expand...
Click to collapse
Come on....Somebody help us, we have a crisis club going on here!!!
did u guys follow all the intructions in upgrading the rom?
try this
disable activesync by ctrl+alt+del and kill wcescomm.exe by end process
make ur phone in bot screen
put ur phone in the cradle(with the power supply, so that ur bat will not drain).
usb should be in the display and not serial
make sure the 3 files(ms_ , radio_ , and nk) are in the same folder with himaupgrade.exe
run himaupgrade.exe
Wait about 5 processes i think. after the pc will let u know if it is done... get ur xda from the cradle and hard reset it (power button+reset button)...
if it doesnt work still im sory, im just a newbie, i just did mine.... maybe u should read more...
shane said:
shane said:
Hi,
My XDA II was up and running until I wanted to flash it with Wm2003se.
I not sure if the battery is fading out or what but the flash didn't conplete and I am left with the "serial 1.06 boot screen" I have tried numerous times of taking out the battery, letting everthing drain out and trying again. but it still goes back to the serial screen. Also activesync won't recognize the device and Windows XP picks it up as "Unknown Device". When I try and reflash it, I get the "communication error". Could someone dump thier Rom and/or instruct me on how to flash my device using my SD card?? Or if there is another way to revive my XDA II, I am open to anything. Thanks!!
Shane
Click to expand...
Click to collapse
Come on....Somebody help us, we have a crisis club going on here!!!
Click to expand...
Click to collapse
I assume you did a hard reset?? In the past three days I have gone from Windows Mobile 2003 >>> Windows Mobile 5 >>> back to Windows Mobile 2003 SE (SIN's magic version available here on XDA-Developers) which I like best of all (for many reasons, mainly speed and reliability). As someone else stated, you need to put it in the cradle AFTER deleting the old profile in ActiveSynch on the PC. Oh, and make sure you are using ActiveSynch 4 or higher. This is now available from Microsoft's site. :idea:
Dear All master,
I need help on my o2 Atom, when I upgrade it to latest version, it stop on stage 5: Burn in Radio Rom, 0%. Nothing happen even I had to wait for 1 hour.
I upgrade it with original atom rom from o2 site : 'Xda-Atom-ENG-20060426-MOT0822.exe'
The device stay in "O2" screen. this device can switch to diagnostic mode.
what should I do?
Note I repeated loading rom but Ietunai problem in Flash
Probably the Radio Hardware broken.... try to install without the Radio ROM.
sliders7 said:
Probably the Radio Hardware broken.... try to install without the Radio ROM.
Click to expand...
Click to collapse
from wher i can find that rom ?
or can u upload it ? for me plzzzz
http://pdaviet.net/showthread.php?t=17158
you can find how to flash rom without bootloader, extended rom , radio.
read my first post
medkid said:
http://pdaviet.net/showthread.php?t=17158
you can find how to flash rom without bootloader, extended rom , radio.
read my first post
Click to expand...
Click to collapse
but my phone is dead and it fail when i try to unpgrade it and it gave this eorr ===
!!!Please use DSUU in OS mode and syno with PC first !!!
usb transfer fail.
what shoud i do now plzz help me i dont know how to get it in DSUU mode its gose on boot loader but cant get it in to DUSS MODE
my Xda Atom Exec o2
waseemraj said:
but my phone is dead and it fail when i try to unpgrade it and it gave this eorr ===
!!!Please use DSUU in OS mode and syno with PC first !!!
usb transfer fail.
what shoud i do now plzz help me i dont know how to get it in DSUU mode its gose on boot loader but cant get it in to DUSS MODE
my Xda Atom Exec o2
Click to expand...
Click to collapse
u can't update using DSUU from activesync anymore. since u got broken ROM.
u must use Bootloader by pressing:
-power + camera + reset
-plug the USB
-start the update using DSUU.
sliders7 said:
u can't update using DSUU from activesync anymore. since u got broken ROM.
u must use Bootloader by pressing:
-power + camera + reset
-plug the USB
-start the update using DSUU.
Click to expand...
Click to collapse
i just do as u say but the but it fail gives the eorr as i told in my last post
and plzz tell me is i just have to get it in bootmode and conact it with usb and start updating
what is DSUU?? is this the file Xda-Atom-Exec-ENG-20060721-MOT0822 ? or what ?
Easy fix, check post #12 http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=EBOOT
more than likely you will need a 256 or 512MB SD Card, the method discussed here (in most cases) will not work with higher capacity cards. Check the Atom Wiki too.
homer285 said:
Easy fix, check post #12 http://forum.xda-developers.com/showthread.php?t=319945&page=2&highlight=EBOOT
more than likely you will need a 256 or 512MB SD Card, the method discussed here (in most cases) will not work with higher capacity cards. Check the Atom Wiki too.
Click to expand...
Click to collapse
i tryied that too but still same postion.....
what shoud i do now plzzz help me i tell u again what it look like
====================================================
USB connected,waiting for download ..............
!!!Please use DSUU in OS mode and syc with PC first!!!
Usb Transfer fail
some one plzzzz help me ? for my atom exec
waseemraj said:
some one plzzzz help me ? for my atom exec
Click to expand...
Click to collapse
well...
after u see bootloader screen and waiting to download.
it should be ok to connect to USB and PC will recognize it for sure!
if doesn't... u should try different computer. not yours. just borrow somebody else computer... see the outcomes? just in case u got error/corrupted activesync.
if still not working... u must using SD card upgrade.
Use any ROM.. use WM5 Official ROM.
Extract the ROM.
put: diskimage_Ver.nb0 to the Blank SD card (use 512MB or 1GB)
and activate the bootloader again.
If your device are normal.. it should looking for SD card and start installing the ROM. If your device badly damage.. it will NOT run both method.
i don't know this is your hardware or Software are damage.
Maybe u should send it to the repair... hopefully u still got the warranty.
If Hardware is the problem, usually they replace the motherboard.
because no way to fix NAND memory module.
just keep trying... don't try one time only...
Good Luck & Pray!
sliders7 said:
well...
after u see bootloader screen and waiting to download.
it should be ok to connect to USB and PC will recognize it for sure!
if doesn't... u should try different computer. not yours. just borrow somebody else computer... see the outcomes? just in case u got error/corrupted activesync.
if still not working... u must using SD card upgrade.
Use any ROM.. use WM5 Official ROM.
Extract the ROM.
put: diskimage_Ver.nb0 to the Blank SD card (use 512MB or 1GB)
and activate the bootloader again.
If your device are normal.. it should looking for SD card and start installing the ROM. If your device badly damage.. it will NOT run both method.
i don't know this is your hardware or Software are damage.
Maybe u should send it to the repair... hopefully u still got the warranty.
If Hardware is the problem, usually they replace the motherboard.
because no way to fix NAND memory module.
just keep trying... don't try one time only...
Good Luck & Pray!
Click to expand...
Click to collapse
The above information will likely do more harm than good!
waseemraj said:
i tryied that too but still same postion.....
what shoud i do now plzzz help me i tell u again what it look like
====================================================
USB connected,waiting for download ..............
!!!Please use DSUU in OS mode and syc with PC first!!!
Usb Transfer fail
Click to expand...
Click to collapse
Bro I have recovered from this 20+ times, if its not working (and you can enter bootloader mode) then you're doing something incorrectly, either that or your memcard is incompatible, remember in most cases 256 or 512MB are the only working sizes! So place that EBOOT.nbo into and "empty" SDCard with your PC, enter the bootloader then stick the card in.... It wont take long, once you the screen goes black pull out the SDcard and then enter bootloader, plugin your USB and execute official O2 rom AKU2.2
The flash may not finish completely freezing in the Extended rom update, dont panic! unplug, softreset then flash in DSUU mode...easy as! works every time!
homer285 said:
Bro I have recovered from this 20+ times, if its not working (and you can enter bootloader mode) then you're doing something incorrectly, either that or your memcard is incompatible, remember in most cases 256 or 512MB are the only working sizes! So place that EBOOT.nbo into and "empty" SDCard with your PC, enter the bootloader then stick the card in.... It wont take long, once you the screen goes black pull out the SDcard and then enter bootloader, plugin your USB and execute official O2 rom AKU2.2
The flash may not finish completely freezing in the Extended rom update, dont panic! unplug, softreset then flash in DSUU mode...easy as! works every time!
Click to expand...
Click to collapse
Confirm!!!
I have done this also even using 1 GB memcard, my memcard is NCP mini SD.
I don't know it was lucky or it does work for 1 GB memcard. Even with non empty one.
But becareful, maybe I am just lucky, perhaps you should use 256 MB or 512 MB only.
homer285 said:
The above information will likely do more harm than good!
Click to expand...
Click to collapse
hei... he is desperately need help.
We all want to help him, thats all i can offer.
If you have different method.. thats a good news for him.
everybody here try to help him.. contribute something to help him.
so no more harm to his already broken device.
think the brighter side!
cheers
I have trouble with miniUSB on Atom, we can use miniSD in order to update firmware for Atom??
miniSD??
can use BT?
With the usb have you tried wiggling the cable, or even changing the cable. you can't flah by bluetooth as the drivers are installed when the flash takes place, i would not advise flashing by the sd card as it is very delicate and more cases than none, fail. Try jtag look in wiki and it shows a very simple and cheap jtag
if ur miniusb trouble u can not charge. hehe.. how to refil ur batt?
p4bus800 said:
I have trouble with miniUSB on Atom, we can use miniSD in order to update firmware for Atom??
Click to expand...
Click to collapse
yes, you can upgrade ROM via miniSD flashing. I won't recommend it if you don't know how. use the search function mate, you'll find something bout flashing via minisd. I just forgot if it's posted in the wiki aswell but you can check
hendranata said:
if ur miniusb trouble u can not charge. hehe.. how to refil ur batt?
Click to expand...
Click to collapse
I've used multicharger
@brian_2cool4u : thanks, I'll search
hi
i hav resolved the update utility problem but ow i hav tried to update it in bootloader mode in using usb cable and mini sd methode flashing , in the same case it's stopped at 16%.Someone can say me how to do for my upgrade gone untill 100% ?
thanks a lot
dune_973 said:
hi
i hav resolved the update utility problem but ow i hav tried to update it in bootloader mode in using usb cable and mini sd methode flashing , in the same case it's stopped at 16%.Someone can say me how to do for my upgrade gone untill 100% ?
thanks a lot
Click to expand...
Click to collapse
1. try changing USB cable.
2. redownload ROM, it may be corrupted.
yes but now i can't restart my xda. charges is on but don't wanna to start.and i hav ever try with usb cable.Wich rom do u think i hav to try if i can deblocked him ?
i done a brick test .it's ok.let's me know wich rom cuz all roms stop at 16%.thanks a lot
dune_973 said:
i done a brick test .it's ok.let's me know wich rom cuz all roms stop at 16%.thanks a lot
Click to expand...
Click to collapse
try downgrading first to original o2/MWG WM5 then flash to any cooked ROMs
i hav done a upgrade and after a hard reset my xda stay on 02 screen.nothing else
ok i hav download roms and all stopping at 14%.after a hard reset i have the screen 02 but after nothing else.
Someone can help me , when i done the upgrade, my device rom is 0.
I mind me if it's not a problem with bootloader in mn1 or because i try to make a upgrade where the rom is corrupted by the first flash i have done.
i forget something activesync don't work too.
Give me somes ideas .please
dune_973 said:
ok i hav download roms and all stopping at 14%.after a hard reset i have the screen 02 but after nothing else.
Someone can help me , when i done the upgrade, my device rom is 0.
I mind me if it's not a problem with bootloader in mn1 or because i try to make a upgrade where the rom is corrupted by the first flash i have done.
i forget something activesync don't work too.
Give me somes ideas .please
Click to expand...
Click to collapse
did you remove miniSD when you flashed via bootloader?
yes .same result.
I mind me something after read forum and wiki.my device is not locked and i should done a cid unlock or a hard spl ?
Cuz i hav download all rooms and each stop at 14% same in mini sd and each time i got the spash screen.
Someone can help me about this
dune_973 said:
hi
i hav resolved the update utility problem but ow i hav tried to update it in bootloader mode in using usb cable and mini sd methode flashing , in the same case it's stopped at 16%.Someone can say me how to do for my upgrade gone untill 100% ?
thanks a lot
Click to expand...
Click to collapse
kind to flash by boot loader ( ACTION+SOFT RESET ) by USB cable ,if you use
SD card it risk to brick atom.
I was flash the rom : Prohet Touch XB in my 818pro, after i would change back the rom to Win mobile 5. When I flash to the old rom, it stop on 95% and auto reset, i try 3-4 times also have that problem, can any one tell me how to do it. please.
Put the device into bootloader, and read this guide: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
l3v5y said:
Put the device into bootloader, and read this guide: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Click to expand...
Click to collapse
I know put the device into bootloader, but my device already keep on bootloader status, i try to flash, but when the bar near 95%, my device will auto reset, than it can't completed finish. And appear "error 302"...
Can you help me how to do it, please.
What brand is your device? Get an official ROM for that device...
What is the rest of the error?
I think that you should force your Prophet into Bootloader mode with keys/buttons manually. (see "how to" from the link @ my signature. ... try, no harm
l3v5y said:
What brand is your device? Get an official ROM for that device...
What is the rest of the error?
Click to expand...
Click to collapse
My device is Dopod 818pro, i think the problem is my device is can't charger batter now, can anyone post the "SD card flash rom" method and software, please!
quizlee said:
My device is Dopod 818pro, i think the problem is my device is can't charger batter now, can anyone post the "SD card flash rom" method and software, please!
Click to expand...
Click to collapse
Unless you have backed up your ROM to the SD card, this flashing method cannot be done (yet).
Does the LED light up when you connect it to the mains charger?
l3v5y said:
Unless you have backed up your ROM to the SD card, this flashing method cannot be done (yet).
Does the LED light up when you connect it to the mains charger?
Click to expand...
Click to collapse
No, the problem is the LED is no light up, even the main charger or usb charger, any mothod can solve this problem, please.
quizlee said:
No, the problem is the LED is no light up, even the main charger or usb charger, any mothod can solve this problem, please.
Click to expand...
Click to collapse
Does the device do anything ATM?
l3v5y said:
Does the device do anything ATM?
Click to expand...
Click to collapse
Sorry, what's meaning ATM, my device is always on the 3-color status now.
so it doesn't have any reaction...
quizlee said:
Sorry, what's meaning ATM, my device is always on the 3-color status now.
so it doesn't have any reaction...
Click to expand...
Click to collapse
ATM-At the moment.
If it is in the bootloader, it should be re flashable.
Use this thread: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
and use this ROM: ftp://ftp.xda-developers.com/Uploads/Prophet/Prophet-roms/RUU_Prophet_220734_2207114_024721_NVID.exe
l3v5y said:
ATM-At the moment.
If it is in the bootloader, it should be re flashable.
Use this thread: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
and use this ROM: ftp://ftp.xda-developers.com/Uploads/Prophet/Prophet-roms/RUU_Prophet_220734_2207114_024721_NVID.exe
Click to expand...
Click to collapse
Thanks, but I try many many times, some time the bar till to 80%, some time 50%, my device will auto reset, than the pc appear "error 302" need replay one more, but also same result...
How can I do , can you tell me, please.
quizlee said:
Thanks, but I try many many times, some time the bar till to 80%, some time 50%, my device will auto reset, than the pc appear "error 302" need replay one more, but also same result...
How can I do , can you tell me, please.
Click to expand...
Click to collapse
if no hope.... try my tool for some luck.......
Many prophet had been saved......
good luck !!