Hello,
I have a problem.
I got my Wizard G4 (MDA Vario)
And it was simlocked now at first lokiwiz didn't work, so I decided to overwrite the ROM first and that's what I did. But I didn't read well, so now I have a wizard with a custom rom but it's not simlock free. Now at this point I do have the unlock code for my phone but when I put my sim in it. I can't find where to put it in.
Can someone help me please?
Related
Hy guys,
I have a post Dec.2 x01HT and have the following problem. I have bought the imei-check unlocker when it came out and used it. Originally it worked, I tried it with a DOCOMO SIM and everything was nice, but when I tried a GSM SIM it still said simlock....
I e-mailed imei-check and they said I have to do the unlock during a hard reset before the softbank settings screen and that is what I did. After that my device worked with a GSM Sim, but I had a ton of problems: the windows hangs every few hours and I have to reset the set, also I cannot get the hold-down vibrate function of the radio button to work, the reaction time of the touch screen is very slow etc.
I also noticed that if I hard-reset without using the imei-check unlocker after the settings procedures there is an auto customization procedure that runs and customizes the phone to the softbank settings and looks, but if I do the hard reset and unlock with imei-chek this procedure doesn't run and I suspect that is part of the reasons for all the problems.
I was wondering if anyone has experienced similar problem and can help me solve this problem?
I was also wondering if I run the free unlocker on my device will it work better?
P.S. I am using the original Softbank ROM with the English MUI by Asukal.
kalintri said:
Hy guys,
I have a post Dec.2 x01HT and have the following problem. I have bought the imei-check unlocker when it came out and used it. Originally it worked, I tried it with a DOCOMO SIM and everything was nice, but when I tried a GSM SIM it still said simlock....
I e-mailed imei-check and they said I have to do the unlock during a hard reset before the softbank settings screen and that is what I did. After that my device worked with a GSM Sim, but I had a ton of problems: the windows hangs every few hours and I have to reset the set, also I cannot get the hold-down vibrate function of the radio button to work, the reaction time of the touch screen is very slow etc.
I also noticed that if I hard-reset without using the imei-check unlocker after the settings procedures there is an auto customization procedure that runs and customizes the phone to the softbank settings and looks, but if I do the hard reset and unlock with imei-chek this procedure doesn't run and I suspect that is part of the reasons for all the problems.
I was wondering if anyone has experienced similar problem and can help me solve this problem?
I was also wondering if I run the free unlocker on my device will it work better?
P.S. I am using the original Softbank ROM with the English MUI by Asukal.
Click to expand...
Click to collapse
You can still do the customization manually. There is only one file that you aren't supposed to run. Just unlock your EXT-ROM and install the cabs one by one. Pof has a Softbank extended rom with the bad file removed around here somewhere. In any case the "fix" cabs are all over the place and you probably don't even need to run the softbank stuff if you don't want to.
Thanks,
I am not too much into these things. Originally all I wanted was to SIM unlock my set, but I will try to find how to do all the things you said...to unlock the EXt-ROM and install the cabs myself.
Can anyone tell which cab exactly I should NOT install?
I have downloaded the Softbank Extended ROM from here, but it seems to have even more cabs than in my original ExtRom on the device. I would appreciate a list of which cabs to install or not to install.
Thank You all
So how does this IMEI unlock could work?
I tried to unlock Hermes Orange SPV M3100 withe the latest unlocker v3a but couldn't unlock...After run auto unlock v3a, and run hermes unlock at the end, it says unlock successfuly but the phone still asks to enter unlocking code..i've been reading the hernes unlock threads but could find the solution to unlock it..this hermes has ipl 1.01 and spl 1.40 0ipro...anyone knows the way to unlock please help..thanks
sorry..problem solved, phone's unlocked...don't know what happened first but after hard reset phone, insert original sim and repeat procedure, phone is unlocked after that.
hi, i have the same problem. When i m flashing with Auto_unlock_3a_pof , i must insert original sim (orange) or no?
thanks
hi, I had the same problem. the unlocker went thru the procedure as successful, but was still locked to orange and asked for the code.
I had ran it without any sim.
after I did a hard reset and put in an orange sim, then ran it. it was ok.
unlocked. thanks.
you gotta give LOTS of details about your problem. there are literally hundreds of possibilities if you give us no details about what you did, what went wrong, during what stage... have u set up correctly, did you flash hardspl, was your battery full, did you read instructions well or just skim and jump ahead?
i hav same problem...."--------------------------------------------------------------------------------
I tried to unlock Hermes Orange SPV M3100 withe the latest unlocker v3a but couldn't unlock...After run auto unlock v3a, and run hermes unlock at the end, it says unlock successfuly but the phone still asks to enter unlocking code..i've been reading the hernes unlock threads but could find the solution to unlock it..this hermes has ipl 1.01 and spl 1.40 0ipro...anyone knows the way to unlock please help..thanks""" plz help me
Ok, i would like to know what the fucx is going on?? I have g4. I use softspl and it works fantastic. I did the hardSPL and now it shows after boot spl 21.1.olip , so, thats good. Problem is, that i cant flash roms with RUU in package, cause i get every time the message of Wrong upgrade tool ??? Other thing is, that the wizard Tool shows, that i have IMEI lock, but i can use slovenian sim in german phone?? Other thing, i trier sim-unlock with lokiwiz , i had the sim unlock code prepared to type it in. i change the operators sim, but the funny thing i didnt had to enter the pin and the sim was working- i could make a call. ?!??!?!?!?!?!?!?
What the heck is going on?? I use nbd 9.1, works as it should.I have eye on phone, autostarted , great app to get the info of other sim.
Thanks for infos
Do a search on the forum before you post.
This problem occured to several users, there fore equinoxe have had a special RUU from Mun in his HardSPL thread.
Try that RUU, it should work
Thank you. But what could be the problem with SIM??
badguy999 said:
Thank you. But what could be the problem with SIM??
Click to expand...
Click to collapse
did you sim unlock your phone? if not thats most likely the problem
I didnt, cause the phone didnt show me> Enter the code for unlock. The foreign Sim worked without entering the pin code. LOL
HEY man, i saw in the post of sSPL that when you was trying to start the START-sSPL.exe, you cant because cecopy.exe was doing an issue, but what did you do for solve this problem??
P.D: Sorry for my english
Hi,
I purchased the Softbank X01HT (post Dec) in Japan when i was working in Japan. I lived with the Japanese OS even though i don't understand Japanese because I didn't want to temper with it just incase something goes wrong and i can't use the phone. Well, now im back in Australia ... and i need to unlock it and flash a new ROM to it so that I can use it in Australia .. otherwise.. it is effectively a brick....
so.. i spent the past two days reading all the valuable information u guys provided... and in the end.. i decided to first unlock and superCID my phone using the AUTO_Unlock_v3a.bat provided by POF ... and then flash it with the Jasjam telstra ROM (RUU_Hermes_DL_UK_3[1].62.305.5_6275_1.54.30.10_108_Ship.exe) also found in this forum which received good feedbacks...
ok... after i executed the AUTO_Unlock_v3a.bat program .. everything went well... and at the end of it.. the screen even said.. successful in both unlock and superCID ... so.. i assumed that my phone is unlocked...
then... i went to flash my phone with the abovementioned jasjam ROM .. and this too.. everything went just fine ... and now.. my phone is working with this new ROM (cool! first time im able to read my x01ht coz its in English) ...
without a sim.. the OS works fine.. etc etc...
however, when i tried to put a telstra sim card in it ... its still simlocked ...
the SimLock screen comes up and requests me to input unlock code ...
so.. i did more reading and researched but can't find any solution to this ... i even tried that "unlock" code (22051978) but it doesnt work ...
Please.. can someone help me with this issue with my phone? now.. it seems that i just need to unlock my phone to use it as my jasjam ROM is working fine. Below are further details:
ROM version: 3.62.305.5
ROM date: 11/06/07
Radio version: 1.54.30.10
EtRom version: 3.62.305.116
any help/comments will be highly appreciated... thanks in advance...!
read somewhere that if you let the softbank go through the 1st boot and it installs all the extra stuff you wont EVER be able to unlock it again. some one else may need to clarify this but apparently you need to soft reset after you've reached the today screen but before the customisations start. if you didnt do this then you probably wont be able to unlock it. sorry if this is wrong/bad news.
Hope someone else can corroborate this.. cheers...
thanks for your reply ultramag69 although i hope that u r wrong.. hahaha
fingers crossed ... hopefully.. positive news from some experts ...
After re-reading the posts, i cannot find that I did anything wrong.
This link "http://forum.xda-developers.com/showthread.php?t=293665" states that the unlocker v3a "can be used in all HTC Hermes devices, no matter which bootloader version the device is running", with the exception of "x01ht post April devices" (i.e., white x01ht).
However, my x01ht is black and is a pre-April device.
So, I am still not sure what is wrong. Please help please help any experts out there ...
POF ... if you are there.. please help ... i need your expert advice thank you in advance.
ultramag69, i think that you are referring to this "http://forum.xda-developers.com/showthread.php?t=301952".
Quote:
"Here's how to unlock the new batch of SoftBank X01HT devices with radio 1.14.01.10.
This process is ONLY valid for new devices which have never turned on or let the SoftBank Extended ROM install.
If you have already let the ExtROM install you CAN'T sim-unlock it."
Fortunately, i find that this does not apply to me because my phone is not post april. Also, originally, my radio was never 1.14.01.10. It was 1.14.00.10.
help..........
snowboarder said:
Hi,
I purchased the Softbank X01HT (post Dec) in Japan when i was working in Japan. I lived with the Japanese OS even though i don't understand Japanese because I didn't want to temper with it just incase something goes wrong and i can't use the phone. Well, now im back in Australia ... and i need to unlock it and flash a new ROM to it so that I can use it in Australia .. otherwise.. it is effectively a brick....
so.. i spent the past two days reading all the valuable information u guys provided... and in the end.. i decided to first unlock and superCID my phone using the AUTO_Unlock_v3a.bat provided by POF ... and then flash it with the Jasjam telstra ROM (RUU_Hermes_DL_UK_3[1].62.305.5_6275_1.54.30.10_108_Ship.exe) also found in this forum which received good feedbacks...
ok... after i executed the AUTO_Unlock_v3a.bat program .. everything went well... and at the end of it.. the screen even said.. successful in both unlock and superCID ... so.. i assumed that my phone is unlocked...
then... i went to flash my phone with the abovementioned jasjam ROM .. and this too.. everything went just fine ... and now.. my phone is working with this new ROM (cool! first time im able to read my x01ht coz its in English) ...
without a sim.. the OS works fine.. etc etc...
however, when i tried to put a telstra sim card in it ... its still simlocked ...
the SimLock screen comes up and requests me to input unlock code ...
so.. i did more reading and researched but can't find any solution to this ... i even tried that "unlock" code (22051978) but it doesnt work ...
Please.. can someone help me with this issue with my phone? now.. it seems that i just need to unlock my phone to use it as my jasjam ROM is working fine. Below are further details:
ROM version: 3.62.305.5
ROM date: 11/06/07
Radio version: 1.54.30.10
EtRom version: 3.62.305.116
any help/comments will be highly appreciated... thanks in advance...!
Click to expand...
Click to collapse
hey bro!when you r already flashed v3a unlock,than you should down a software name like "Hard-SPL-V7",it will help you to unlock the exrom,make you able to flash the new os\rom...
"HARD-SPL-V7" has 2 software,1st is "RUU_signed.nbh",2nd is "RUUWrapper.exe".
devileric, read post carefully. snowboarder has no problem with reflashing oses, its the sim that needs unlocking now and hard spl WONT do that...
Still reading and researching. I'd probably retry the unlock tool. it cant hurt but may work... cheers
devileric ... yes ... ultramag69 is correct ... my new English Telstra Jasjam OS works like a beauty when it operates WITHOUT a sim card. However, when i try to insert a telstra (or optus) sim card in there, there is a prompt that requires me to enter a unlock code. Please note that the unlock code 22051978 does NOT work in this case (also doesnt work in alot of other cases that i read in this forum).
Ultramag69, thank you for your help and replies, much appreciated. I actually did try the unlocking program again (three times ) . However, when i execute the AUTO_Unlock_v3a.bat when my OS is the new telstra jasjam OS, my phone will freeze on the telstra startup screen after the radio update step of the unlocking program when it automatically resets. Thereafter, even when i perform soft reset again and again, it will just freeze there. When that happened the first time, I thought that I bricked my phone .. ahhaha.. but fortunately, I was able to simply go to the tri-color boot screen and then simply flash the above said telstra Jasjam ROM. This will get me back to square one, i.e., working Jasjam OS, but phone is still sim locked.
I spent another night last night reading the applicable threads. I find that quite afew other people had the same problem as me. And I also find that whenever such problem is posted, its either ignored or a moot reply is given.
So, for the experts out there, if there is a solution to this, please kindly let me know. I am sure it will others will find it helpful too. Thank you.
Sorry wrong post
After i did a hardspl and installed wm6.1 my green edition my prophet is simlocked.I used the prophet tools and did the unlock and it gave me some password.But when i press the password it keeps sending me to the pin screen and it always ask me the unlock code.It says unkown sim status or something.What should i do?
When i did the sim unlock staff i had my one and only sim i use.
SHould i try to turn it on with a different sim card?Will it work?
Cause if i need to have the original sim card which was an orange sim card then i am screwed
Do you have an Orange branded Prophet? I think the ROM you are using is based on Cloudyfas latest ROM which puts the SIM lock back on on Orange branded Prophets! I had the same issue and so are no longer using that particular ROM...
So i have to use another rom?Can you recommend me another rom?
I need either a wm6.1 or a wm6 with greek characters.
i would prefer to keep the wm6.1 without the greek but can we do something to sim unlock it?
well use lokiwiz 3 it just provides you the code...do a search on lokiwiz 3 on the forum....keep win mobile 6 and unlock it through code..it's simple...any other question reply this...work safe
It doesn't persist though.
ROMs based on Cloudyfas latest ROMs have SIM Lock issues on Orange branded Prophets.
then the ultimate solution is get it unlocked at a unlocking point...you pay but at least you know you don't do stupid things...or do ass l3v5y says and change the rom....work safe
The issue is with the ROM, and not with the unlocking procedure.